Mašina Vizuoti Pasukami pirkti naudotą (38 723)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, KRAUSS MAFFEI KM 420-2000 CX Injection Moulding Machine Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticising Unit Complete plasticising unit designed for processing thermoplastics. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar spacing (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection throughput: 368 cm³/s Screw speed: 285 rpm Plasticising rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Hfedpfxjyugkwo Ab Sod Pump motor rated power: 75 kW Installed heater power: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the motor speed to the actual demand during each production cycle. Key Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - Worldwide quality and proven industrial technology - Reduced energy losses during idle running - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Retrofit possible on existing hydraulic injection moulding machines

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, KRAUSS MAFFEI Injection Molding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color display integrated with the operator console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, with abrasion protection. Clamping Unit - Clamping force: 11,000 kN - Mold opening force: 770 kN - Platen dimensions (horizontal × vertical): 2210 × 1910 mm - Tie-bar spacing (horizontal × vertical): 1550 × 1250 mm - Mold opening stroke: 2000 mm - Minimum mold height: 600 mm - Maximum mold height: 1200 mm - Platen stroke: 2600 mm - Ejector stroke: 300 mm - Ejector force: 220 / 110 kN Injection Unit - Screw diameter: 120 mm - Maximum injection pressure: 1758 bar - Injection volume: 6786 cm³ - Shot weight (PS): 6175 g - Screw speed (standard / option): 103 / 145 rpm - Injection rate (standard): 1118 cm³/s - Injection rate (accumulator): 1696 cm³/s Electrical & Hydraulic Equipment - Rated pump motor power: 132 kW - Installed heater power: 82 kW - Number of cylinder heating zones: 7 - Number of dry cycles (EUROMAP): 802 cycles/h - Hydraulic oil tank capacity: 2440 l Hfedsyugfzjpfx Ab Ssd Machine Dimensions & Weight - Net weight (incl. control cabinet): 73 t - Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be fitted with a state-of-the-art ESS servo drive system, significantly increasing the energy efficiency of hydraulic injection molding machines. The system regulates the operation of the hydraulic pump motor using a frequency inverter, adjusting the motor speed according to current demand during the production cycle. Main Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class quality and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of the motor and hydraulic components - Possibility to retrofit existing hydraulic injection molding machines The ESS system allows for significant reduction of the machine’s operating costs while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (H × V): 1620 × 1500 mm Tie bar clearance (H × V): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Hfedsyugctopfx Ab Sed Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions & Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system, which significantly increases energy efficiency for hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the rotational speed to the actual demand during the production cycle. As a result, electrical power is only consumed when the machine actually requires it. Key Benefits: - Up to 30% reduction in electrical energy consumption - Hydraulic pump servo drive technology - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Available for retrofit on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production performance.

Būklė: geras (naudotas), Gamybos metai: 2001, NETSTAL S 6000-5500E Injection Moulding Machine Basic Information Manufacturer: Netstal Model: S 6000-5500E Year of manufacture: 2001 Operating hours: 88,933 h Clamping Unit Clamping force: 6,000 kN Platen dimensions (H × W): 1,620 × 1,550 mm Tie bar spacing (H × W): 1,020 × 1,020 mm Minimum mould height: 500 mm Maximum mould height: 1,000 mm Maximum mould opening: 1,950 mm Centring ring diameter: 160 mm Maximum ejector stroke: 280 mm Injection Unit Screw diameter: 90 mm L/D ratio: 27 Injection volume: 2,290 cm³ Injection weight (PS): 2,196 g Maximum injection pressure: 2,410 bar Maximum injection speed: 4,453 cm³/s Machine Dimensions and Weight Clamping unit dimensions: 7.21 × 2.40 × 2.50 m Injection unit dimensions: 4.60 × 2.61 × 2.50 m Total machine weight: 62,000 kg (62 t) Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which improves the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency converter that adjusts the motor speed to the actual demand during the production cycle. As a result, electrical power is consumed only when the machine truly requires it. Advantages of the ESS System: - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class quality and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Possibility of retrofit installation in existing hydraulic injection moulding machines The ESS system enables significant reduction of machine operating costs while maintaining full production parameters. Hjdpfsyugcgsx Ab Ssfd

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Details Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Hfjdpfx Ajyugalsb Sod Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electro-hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and tube 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor by using a frequency inverter, which adjusts the motor speed according to the machine’s actual demand during the production cycle. This ensures that electrical energy is only consumed when actually needed. Main Benefits - Reduction of electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy loss during machine idle time - Lower heating of the hydraulic system - Increased service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce the operating costs of the machine while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, ENGEL DUO 11050/2300 Injection Moulding Machine Basic Information Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Clamping Unit Clamping force: 2,300 kN Platen dimensions (H × V): 2,900 × 2,500 mm Clearance between tie-bars (H × V): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Machine Dimensions and Weight Net weight of the machine: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Hedpfx Abeyuf Tdo Sjfd Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which improves the energy efficiency of hydraulic plastic injection moulding machines. This system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. As a result, electrical energy is consumed only when actually needed. Benefits of the ESS System - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows a significant reduction in machine operating costs while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, KRAUSS MAFFEI Injection Moulding Machine KM 4000-24500 MC with optional ESS energy-saving system Basic Information Hfsdpeyuf N Eofx Ab Sjd Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping Unit Clamping force: 40,000 kN Mould opening force: 2,525 kN Platen dimensions: 3315 × 2920 mm Clearance between tie bars: 2240 × 1800 mm Mould opening stroke: 3100 mm Minimum mould height: 1100 mm Maximum mould height: 2000 mm Maximum daylight opening: 4200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection Unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Maximum injection pressure: 1843 bar Injection volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1431 cm³/s Plasticising capacity: 266 g/s Electrical-Hydraulic System Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of heating zones (barrel): 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2700 l Machine Dimensions and Weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo-drive system that significantly improves the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, which adjusts the motor’s rotational speed to the actual demand of the machine during the production cycle. As a result, electric power is only consumed when it is truly needed. Key benefits of the ESS system: - reduction of electrical energy consumption by up to 30% - hydraulic pump servo-drive technology - world-class, proven technology used in the plastics processing industry - reduced energy consumption during machine idle time - lower heating of hydraulic circuit - extended service life of the motor and hydraulic components - retrofittable to existing hydraulic injection moulding machines without modification of the machine structure The ESS system is a state-of-the-art solution that significantly lowers the operating costs of injection moulding machines, while maintaining full production performance.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 520 mm, krovimo aukštis: 80 mm, Pasiūlymas už geriausią kainą! Elektromechaninės staklės IDEAL 5221-95 EP Pjūvio plotis: 52 cm Darbinis aukštis: 8 cm Likęs pjūvis: 3,5 cm Padavimo gylis: 52 cm Dvi rankenos valdymui, apsauginis gaubtas Hfodpfx Aeyuynpjb Sod Programuojama valdymo sistema su 9 programomis Matmenys (A x P x G): 126x85,5x106,7 cm, 260 kg Komplekte iš viso 3 peiliai, visi pagaląsti, su pjaustymo juostomis Įrankiai ir naudojimo instrukcija 230V/50Hz, 1,1 kW

Būklė: beveik kaip naujas (naudotas), TETRA PAK KARTONO PAKUOTOJAS CBP 32 VERSIJA 400 GAMYBOS METAI 2010 TIK 2177 DARBO VALANDŲ!! Hfodpfx Aoya I Sgsb Sed UNIVERSALUS PAKUOTOJAS 200/250/1000 ml KAIP NAUJAS VIETA – LENKIJA PARUOŠTAS SIUNTIMUI

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Our company specializes in the manufacture of pallet production tables. Our range includes several types of tables, both with and without pneumatic control. Advantages of our tables: - Robust and straightforward construction - Capability to produce various types of pallets in different sizes - Minimum working area of the table: 800 mm x 600 mm - Maximum working area of the table: 2000 mm x 1200 mm - Balancers for supporting nail guns - Quick and easy adjustment of the table for different pallet sizes Hodpfewn Irqox Ab Sofd - Only one operator required for table operation - Competitive price Possibility of shipping the table via courier service. Custom-made tables available to suit non-standard pallet dimensions.

Būklė: labai geros būklės (naudotas), Daugiafunkcinis įrenginys Robland, formatavimo, storio obliavimas Modelis: NX 310 pro Storio obliavimas 3 kW: plotis 31 cm, max aukštis apie 220 mm, 3 peiliai, Hfodpfx Ajytdfpsb Sjd 1 padavimo greitis, Lyginimo obliavimas: plotis 31 cm, stalų ilgis 140 cm, 3 peiliai, kampu reguliuojama liniuotė Freza 4,5 kW: velenas Ø30 mm, velenas reguliuojamas aukštyn-žemyn 4 greičiai, šoninis vežimėlis, reguliuojama liniuotė, Formatavimo pjūklas 3 kW: reguliuojamas aukštyn-žemyn ir 0–45, įspjova Vežimėlis 205 cm + prailginimas 35 cm Iš viso 240 cm pjovimo ilgis liniuotė šoniniame vežimėlyje, pjūklo maks. 250 mm Horizontali gręžimo mašina: stalas reguliuojamas aukštyn-žemyn, pirmyn-atgal ir į šalis, Įrenginys turi 3 variklius maitinimas 380 V, Įrenginys naudotas, labai geros būklės, paruoštas darbui, tvirtas daugiafunkcinis įrenginys.

Būklė: naudotas, Siūlome šią naudotą Ishida daugiagalvę dozavimo svarstyklių sistemą, gamybos metai nežinomi. Bendri matmenys: 1160x1160x2120 mm. Hfjdeytb T Djpfx Ab Sod Jei turite klausimų ar reikia papildomos informacijos, prašome atsiųsti žinutę arba susisiekti telefonu.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, darbinė masė: 1 300 kg, Gamybos metai: 2020, veikimo valandos: 1 800 h, mašinos/transporto priemonės numeris: 01092020, Įranga: dokumentacija / vadovas, HDPE/LDPE plėvelės pirštinių gamybos mašina. Mašinos korpusas pagamintas iš plieno. Dvigubos plėvelės tiekimo stotys sujungtos sankabomis, užtikrinančiomis tolygų HDPE plėvelės įtempimą, dvigubi dažnio keitikliai kontroliuoja plėvelės vyniojimą. Mašina aprūpinta centriniu pavaros mechanizmu, kuris valdo visus pirštinių formavimo mechanizmus, užtikrindamas tikslų padavimą į suvirinimo ir gatavos produkcijos rūšiavimo tašką. Pilnos komplektacijos mašina su šiais moduliais: plėvelės padavimas, suvirinimas, atskyrimas ir perforacija, rūšiavimas bei atliekų paėmimas. Hodpfexmvu Usx Ab Sefd

Būklė: dilaminuotas dirbtuvėje (naudotas), Linija HANDTMANN VF-616 + PVLH-228 Hfodpfx Aoibaymeb Sed

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: serial no B27-13B, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Siūlome šią naudotą STORK MPS B.V. įrangą. Tipas: DMM50; Serijos Nr.: B27-13B; Užsakymo Nr.: BX152004; Įtampa: 400V; Fazė/Hz: 3/50; Kaulų separatorių, pagaminimo metai 2004. Nėra valdymo spintos. Hfodpfx Asytbznob Sod Kilus klausimams ar reikalingai papildomai informacijai, prašome parašyti žinutę arba susisiekti telefonu.

Būklė: naudotas, Gamybos metai: 2005, galia: 3 kW (4,08 AG), Siūlome šį naudotą įrenginį – GMN TECHMET SK-1 odų nuėmimo mašiną, mėsos perdirbimo įranga, pagaminimo metai 2005. Tipas: SK-1 Gamyklinis numeris: M10/05 Pagaminimo metai: 2005 Galia: 3 kW Apsisukimų dažnis: 980 aps./min Kilus klausimų ar reikalinga papildoma informacija, prašome rašyti žinutę arba susisiekti telefonu. Hfodpfx Absytbp So Sod

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Parduodamas Boxmaker 2500 darbo pločio, pilnai automatinis, 2 flexo spaudos įrenginiai 500x200 mm, 2 štampavimo mašinos rankenų skylėms pjauti arba priklausomai nuo uždėto štampavimo įrankio, pagaminimo metai 2023. Hodpfx Abexgbycs Sjfd

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, veikimo valandos: 130 h, HEIDELBERG CD 102-6+LX UV ref. 2969 pagaminimo metai 1999 skaitiklis tik 135 mln Tiesi 6 spalvų su lako pritaikymu ir išplėstu padavimu (UV ir IR džiovinimas), Hfjdeytvalepfx Ab Sjd Maksimalus lapo dydis 720 x 1020mm, CP2000 nuotolinio valdymo pultas, Autoplate ir Preset, Alcolor Vario drėkinimo sistema, Technotrans šaldymo sistema, 4 IST UV tarpinių džiovinimo pozicijos tarp 1&2, 2&3, 4&5 ir 6&L sekcijų, 3 x IST UV tarpinių džiovinimo lempų, 3 x IST UV galinių lempų, Galinis IST IR džiovinimas, Tresu kameros tipo mentelė su anilox voleliu, Automatinis dažų volelių, blakstienos ir spaudos cilindro plovimas, Technotrans Inkline automatinė dažymo sistema, Nepertraukiamas padavimas ir išvedimas su plieninėmis plokštėmis, Grafix miltelių purškimo įrenginys

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Roland 202 TOB ref. 2901 Hfsdpfxoytutqj Ab Ssd metai: 1996 apskaita – apie 90 mln. drėkinimas: Rolandmatic mašina iš karto prieinama

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 18 500 000 h, KBA RA105PRO 5+L ALV2 FAPC ref 2967 metai 2017 apsukų skaičius – 185 mln. maks. našumas – 17 000 lps./val. CX – 1,2 mm Technotrans – Dažymo įrenginio temperatūros kontrolė Plovimo sistema BALDWIN Anilox volelis 100 l/cm / 80 l/cm Hfjdsytunhjpfx Ab Sed KBA VariDry BLUE IR/Karštas oras Oro tiekimo spinta BECKER ErgoTronic Lab ErgoTronic PSO Match ErgoTronic Quality Pass ErgoTronic ACR LogoTronic Professional Techninė būklė labai gera.

Būklė: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 35 000 h, Funkcionalumas: visiškai funkcionalus, ETERNA 1620 SAL Extra, ref. 2950 metai – 2014 maksimalus lapo formatas: 1200 x 1620 mm žaliava: E, B, EB, BC bangos Hsdpfx Ajytum Rsb Sefd vakuuminis padavimas pailgintas padavimas su lapų išlyginimo sekcija – mechaninis matuoklis valymo sekcija paketinis iškrovimas spaudimas: 400 tonų

Būklė: naujas, Gamybos metai: 2024, Būklė: nauja Pagaminimo metai: 2024 Sandėlio numeris: 9738 Pristatymo laikas: iš karto, užsakymo metu galima tarp pardavimas Kilmės šalis: Turkija Kaina: 20 300 € Lizingo įmoka: 389,76 € Hsdpfewirulox Ab Ssfd Sandėlyje: 1 vnt. Lenkimo ilgis: 1530 mm Maks. lenkimo talpa - konstrukcinis plienas: 6 mm Didž. lakšto storis be išankstinio lenkimo - konstrukcinis plienas: 6 mm Didž. lakšto storis su išankstiniu lenkimu - konstrukcinis plienas: 4 mm Viršutinio volo skersmuo: 150 mm Variklio galia: 4 kW Ilgis: 3100 mm Plotis: 1120 mm Aukštis: 1020 mm Svoris: 2100 kg 3 volai Asimetrinis volų išdėstymas su išankstiniu lenkimu 2 varomi volai Šoninio ir spaudžiamojo volo motorinis nustatymas Skaitmeninis šoninio ir spaudžiamojo volų padėties indikatorius Priekin žemyn pasukamas viršutinis volas Judėjimas pirmyn/atgal Grūdinti volai Perkeliama valdymo pultas Eksploatavimo instrukcija VOKIEČIŲ arba ANGLŲ kalba (Simbolinė nuotrauka)

Būklė: naudotas, Gamybos metai: 2008, Techniniai duomenys: Darbinė įtampa: 400 V/A Bendras galios poreikis: 26 kW Hfsdpfjyt Na Sox Ab Sed Apytikslis įrenginio svoris: 690 kg Šaldymo agentas: 134a Matmenys (I x P x A): 1,75 x 0,8 x 2,0 m Riedel L16/29-TR3.24 šaldymo agregatas yra pramoninis vandens aušintuvas (chilleris), gaminamas Riedel Kooling (Glen Dimplex Deutschland GmbH). Dažnai naudojamas lazerinių staklių, pavyzdžiui, TRUMPF lazerių sistemų aušinimui. Prietaiso tipas: pramoninis vandens aušintuvas / lazerinis aušintuvas Pritaikymas: CO2 lazerių, įrengimų, pramoninių sistemų aušinimas Konstrukcija: oru aušinamas skysčio aušintuvas Šaldymo medžiaga: R134a

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 cc Clamping Unit: Clamping force: 400 t Tie bar spacing: 820x820 mm Platen dimensions: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valves x 6 Hydraulic core pullers with needle shut-off, controlled by proportional valve x 4 pairs Hot runner controller x 24 Reinforced injection unit – bimetallic Proportional valve on vertical injection unit – precise dosing Machine with six cylinders / accumulators with compressed nitrogen (additional charge for fast operation) Parallel movements Automatic mould height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Integrated pressure monitoring system by Kistler – mould cavity pressure measurement Original Weber rotary table: highly precise, electrically driven by a servomotor controlled via inverter Rotary table diameter: 1200 mm Rotary table available at extra cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 Hfjdpfx Abeylkk Aj Sed 3-axis robot: all axes driven electrically by servomotors (X, Y, Z telescopic) Approximate stroke: X - 5000 mm Y - 1400 mm Z - 2000 mm Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and safety housing Robot available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the selected machine’s technical tests or participate in live technical demonstrations at our company in Łódź. Price: Upon request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of manufacture: 2011 Injection Unit: Screw diameter: 60 mm Shot weight: 607 g Injection pressure: 2000 bar Dosage volume: 664 ccm Clamping Unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Platen size: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Hfedpfxoylkkpj Ab Sed Additional equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 3 Control system with hot runner x 13 Injection unit hardened - bimetallic Main motor - servo motor driven by inverter Highly precise rotary table, servo motor-driven, controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to modify the injection unit for vertical operation Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All offered machines are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request