Pasukamos lenkimo staklės - hidraulinės

FASTI 2045 - 15/1,5

Sąlyga: geras (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 21100122-F, Offer 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm - Cutting range at 90° (round): 120 mm - Cutting range at 90° (flat): 105 x 105 mm or 180 x 70 mm - Cutting range at 45° (round): 110 mm - Cutting range at 45° (flat): 135 x 60 mm - Mitre adjustment to both left and right: 45° Kledpfx Afowq N Swe Iol - Tilt-adjustable mitre head for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement (approx.): W 600 x H 1,730 x D 1,200 mm - Weight (approx.): 180 kg

Sąlyga: labai geros būklės (naudotas), Pagaminimo metai: 1991 Modelis: ITPS III Serijos numeris: ITPS 80C 25 P1C226 Maksimali prispaudimo jėga: 800 kN Darbinis eiga: 115 mm Maitinimas: 415 V, 50 Hz, 3 fazės Nominali srovė: 119 A Įdiegta galia: 18,5 kW Klodpfx Afjwq Dpqs Isl Įrenginio svoris: 4940 kg Inventorinis numeris: 9.14 Valdymas: Delem DA-65R Įrenginys įsijungia, tačiau valdymas nereaguoja į komandas. Ankstesnis naudotojas originalią AMADA valdymo sistemą pakeitė į DELEM.

Sąlyga: geras (naudotas), Gamybos metai: 1986, mašinos/transporto priemonės numeris: 8618030, Offer 25182 Technical Data: - Max. working width: 2040 mm - Max. material thickness: 4 mm - Roller diameter each: 140 mm - Stroke: 70 mm - Rear roller and lower roller adjustable for conical bending - Upper and lower rollers driven by motor - Working speed right & left: 6 m/min - Drive: 380 V / 6.2 kW - Required space approx.: W 3560 x H 1100 x D 870 mm - Weight approx.: 1700 kg - with: - Asymmetrical roller arrangement Kedpfx Afjwq It Te Ijll - Crowned, induction-hardened rollers - Manual rear roller adjustment - Pre-bending - Swivelling upper roller - Electric foot switch for right and left operation

Sąlyga: naudotas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Kledpedzqblofx Af Iol Folding machine for pre-bending sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is a double-over edge of sheet metal, created by folding it once over itself to increase its rigidity. Folding produces a rounded edge, reducing the risk of injury from cutting on a sharp sheet metal edge. Ideal for sheet metal processing for sheet metal furniture, cladding panels, or for air duct and silencer construction.

Gamybos metai: 2012, Sąlyga: naudotas, kuro tipas: elektrinis, Load capacity in kg: 2500 kg Lift height: 3700 mm Fork length: 900 mm Tyre type: Super elastic Battery year: 2013 Overall height: 2630 mm Kedpsfibh Rofx Af Ioll Machine weight approx.: t Compact forklift truck Duplex mast / Full free lift

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Dėžės tipo elektrostatinė miltelinio dažymo krosnis: Ilgis: 500 cm, Plotis: 250 cm, Aukštis: 300 cm Klodpfev Nvndjx Af Iol - Miltelinio dažymo kabina su filtru: Ilgis: 300 cm, Plotis: 220 cm, Aukštis: 270 cm - Elektrostatinio miltelinio dažymo įranga: Modelis: HMK MULTICOLOR, Naudojimo tipas: Rankinis

Sąlyga: naujas, Gamybos metai: 2025, TYTAN 750 PRO (VARIO) 400V metal lathe (without base) with stepless spindle speed adjustment. This lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, counterboring, and reaming. It is commonly used in small manufacturing operations, workshops, garages, etc. This is the machine version without a base. The TYTAN 750 PRO universal lathe, with its continuous spindle speed adjustment, is ergonomic and tailored to the needs of the user. The reduced setup time when machining a wide range of part sizes translates into productivity and ease of use. VARIO version – electronic, stepless spindle speed adjustment via a DC motor and voltage controller. This ensures the highest rotational accuracy of the lathe chuck, resulting in improved quality of the machined components. Main advantages: - Modern DC motor with smooth spindle speed adjustment provides user convenience and shortens calibration time. - LCD screen with spindle speed display allows monitoring and rapid adjustment of spindle speed when setting cutting and threading modes. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2–3.5), imperial – 21 pitches (8–56 T.P.I.), capable of cutting both left-hand and right-hand threads. - Automatic longitudinal feed with 6 feed rates (0.07 to 0.40 mm/rev) considerably shortens machining time without compromising quality when turning long parts. - The machine is fully compliant with EU directives (CE) as well as Polish standards and DIN norms. Technical specifications: - 3-jaw chuck: 125 mm - Max. turning diameter over bed: 250 mm - Turning diameter over carriage: 150 mm - Turning length between centers: 750 mm - Max. length of installed workpiece (chuck/center): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Maximum tool size: 12 x 12 mm - Top slide travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed adjustment: stepless (L/H) - Spindle speed: L: 50-1125 / H: 100-2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 T.P.I. - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 Kledpfxjvvlxls Af Isl - Motor power S1/S6: 1.1/1.32 kW - Dimensions (L/W/H, without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Sąlyga: naujas, Gamybos metai: 2025, PROD-MASZ is a machine manufacturer introducing a completely new standard of equipment quality. We take personal responsibility for every stage of the production of our offered products, guaranteeing the highest standards and workmanship. Our many years of experience enable us to develop durable, reliable and easy-to-operate machines. We place particular emphasis on functionality, user comfort and ergonomic operation, making us a market leader both domestically and internationally. Those who know us understand that we are a dependable company :) PRESS BRAKE 2.14 m / 1.2 mm Technical Specifications: - Maximum working width: 2140 mm - Bending capacity: up to 1.2 mm (steel sheet) - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm - Upper beam can be lifted in three positions - Gas springs Kodpfxjcntlle Af Iell - Clearance opening: 80 mm - Degree scale - Angle stop - Rear support tray for holding sheet metal - Front depth stops - Approximate weight: 290 kg - The machine complies with CE directives and comes with a 12-month warranty. Rotary shear 0.8 mm available for an additional 350 Euro Price: 1,550 € Shipping cost is EUR 180.00 within Germany Delivery – every week Cash payment upon delivery We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community supply, or plus 19% VAT.

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), A Promecam (Amada) APX 103 CNC press brake is available. Press force: 1000 kN, working width: 3000 mm, distance between uprights: 2550 mm, gap opening: 370 mm, stroke: 100 mm, throat depth: 400 mm, approach speed: 70 mm/s, bending speed: 9 mm/s, return speed: 85 mm/s, drive power: 10.5 kW. Machine dimensions (L/W/H): approx. 3500 mm / 2200 mm / 2300 mm, weight: approx. 6400 kg, control: Amada Operateur, operating hours: 36,261 h. The machine is still in operation, thus the operating hours are increasing. Documentation is available. An on-site inspection is possible. Klsdpfx Aewm Nn Rof Ijl

Sąlyga: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 100057, 1998 metų AMADA VIPROS 2510 KING Perforavimo mašina yra geros būklės, visuomet laiku aptarnauta Amada serviso atstovų. Pagaminta Japonijoje. Pridedama visa dokumentacija. Ši mašina gali būti valdoma 196 kN perforavimo jėga. Įrenginys parduodamas su programinė įranga. Perforavimo mašina vis dar prijungta ir ją galima, bet kada išbandyti, Vilniuje. Ksdjm Ncayopfx Af Ijll Specifikacija: Modelis: AMADA VIPROS 2510K Serijinis nr.: 100057 Metai: 1998 Pagaminta: Japonija Veikimo laikas valandomis: tikslinama Maitinimo valandos: tikslinama Perforavimo jėga: 20 tonų Stotys: 31 Įrankiai: su įrankiais (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maksimalus lakšto storis: 3 mm X Ašies judėjimas: 2500 mm Y ašies judėjimas: 1270 mm Svoris: 11 000 kg Vieta: Vilnius, Lietuva Galima išbandyti: Taip Jei turėsite daugiau klausimų, mielai atsakysime.