Loewer pirkti naudotą (26)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Loewer
mažas skelbimas
Friesenheim
1 332 km
Lakštinio metalo šalinimo mašina
LoewerDiscMaster SF 2/2 - 1500
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, The DiscMaster SF is equipped with oscillating disc stations from above and below, allowing simultaneous processing of both sides of a workpiece in a single pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece, ensuring all internal and external contours are uniformly processed 360°, regardless of contour orientation.
Loewer DiscMaster SF 2/2 – 1500 Deburring Machine (2020)
Manufacturer: Loewer
Type: DiscMaster SF 2/2 – 1500
Year of manufacture: 2020
Condition: very good, used
Max. sanding height: 80 mm
Max. workpiece width: 1500 mm
Disc motor – rated power: 4 x 2.2 kW
Disc motor – speed: 1,000 rpm
Feed adjustment motor – rated power: 2 x 0.37 kW
Height adjustment motor: 0.75 kW
Oscillation motor: 4 x 0.75 kW
Operating voltage: 400 V
Frequency: 50 Hz
On-site fuse: 40 A
Extraction connection size: 2 x 180 mm
Air requirement: 5,500 m³/h
Minimum air velocity at machine connection: 30 m/s
Negative pressure at extraction nozzle: 2,750 Pa
Operating pressure: 6 – 8 bar
Length: 1,950 mm
Width: 2,150 mm
Height: 2,000 mm
Weight: 3,400 kg
Psdpfx Ajxnnfbjdxegu
Options:
– Infeed conveyor table
– Outfeed conveyor table
– Sensor bar for uniform tool wear. Detects machine occupancy and indicates at the infeed where workpieces should preferably be positioned.
Scope of delivery:
– Documentation
mažas skelbimas
Tuntenhausen
1 145 km
Lakštinio metalo šalinimo mašina
LoewerSmartgrinder SG 300 K
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 100 h, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 300 mm, maks. lakšto storis: 150 mm, praėjimo plotis: 300 mm, nominali galia: 7,5 kW (10,20 AG), LÖWER SmartGrinder SG 300 K
Wet Grinding Machine for Grinding or Deburring Metal
Podpfjxbpt Hox Adxegu
- One contact roller unit with height adjustment via lift gear and handwheel
- Workpiece thickness: 0.5 – 150 mm
- Abrasive belt size: 300 x 3000 mm
- Additional conveyor belt 300 x 3040 mm, profile spacing 240
- Additional conveyor belt 300 x 3040 mm, profile spacing approx. 505 mm (6 sections)
- Drive motor: 7.5 kW
- Ammeter for performance display
- Infinitely variable feed speed via conveyor belt: 2–9 m/min
- Digital counter with zero reset (instead of absolute counter)
- Upper tank with drain opening D=120 mm
- Two jet water nozzles completely hosed
- Rubberized and grooved contact roller, 150 mm diameter
- Contact roller Shore 65°
- Additional HT abrasive wheel, grit 120
- Stepless belt speed 7.5–22 m/s, adjustable via frequency inverter and potentiometer for adapting the cutting speed during deburring or finishing
- Grooved return rollers for sanding and conveyor belts
- Height adjustment by handwheel with digital display
- Manual paper belt filter with perforated plate filter holder above the settling tank. Includes holder, reel, and fleece roll. The filter fleece must be advanced manually.
- Infeed guard with emergency stop
- Additional rubberized pressure roller
- Pneumatic belt tensioning
- Rubberized, spring-loaded pressure rollers with adjustable height and spacing
- Settling tank with matching pump
- Dimensions (L x W x H): 1700 x 900 x 2400 mm
- Weight: 685 kg
- Operating voltage: 400V, 50Hz, 3P
- Working pressure: 6–8 bar
- CE-certified
Various VSM grinding fleece (100/180/240), approx. 3 pcs each at €153.00
Various VSM zirconia alumina (80/120/240), approx. 15 pcs each at €16.35
The machine has hardly been used (only once in 2025!) and is in as-new condition! Naturally, WITHOUT faults.
New price over €29,000.00 + VAT
mažas skelbimas
Aalen
1 175 km
Šlifavimo staklės
LoewerDSM 2004
Skambinti
Sąlyga: naujas, Number of sanding units: 4 pcs.
Sanding width: 190 mm
Maximum sanding height: 180 mm
LÖWER - DoubleSander Solid DSM 2004
-----
Double-sided four-belt single-piece wood sanding machine for
sanding solid wood, such as window profiles, etc.
Robust heavy-duty design with innovative features. Suitable
for continuous operation, even with higher material removal rates.
- Sequentially arranged sanding units for pre-sanding,
fine sanding, and finishing, from both top and bottom
1. Belt sanding unit with heavy steel roller
2. Belt sanding unit with rubberized roller and shoe
3. Finishing unit with fiber brush
- Direct-drive sanding rollers for slip-free
power transmission
- Maintenance-free and wear-resistant CERMET-coated sanding
shoes with excellent thermal conductivity and absolute dimensional stability
- External cooling of the sanding zones for cooler sanding
and longer belt life
- Positively guided pneumatically controlled sanding belt
oscillation
- Effective sanding dust extraction directly at the sanding rollers
- Fine-dust extraction at the tension rollers
- Integrated brushing and finishing device with large
sanding dust extraction
- Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection
- Lower-side material removal adjustment via precision lead screw,
with scale ring display (resolution 0.1mm)
- Sanding belt tension via pneumatic cylinder with
constant tension pressure
- Sanding belt change with pneumatic belt relaxation
within seconds
- Adjustable belt tracking during belt change
- Electropneumatic compressed air monitoring
- Infeed protection via contact roller for over-thick workpieces
- Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers
with fine adjustment
- Cardan shaft drive for smooth and uniform workpiece transport
- Feed gear motor with stepless speed control
4-20 m/min
- All motors electrically protected
- Ergonomically arranged operating elements
- Digital thickness display (resolution 0.1mm) with modern
magnetic tape system
Technical data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800mm
- Sanding belt width: 200mm
- Working width: 190mm
- Sanding thickness: 2-180mm
- Four brake motors for the drive: 5.5 kW
- Feed motor: 1.5 kW
- Feed speed: 4-20 m/min.
- Automatic height adjustment: 0.37 kW
- Two brush units
with fiber brushes D 120 x 200 mm each, 0.37 kW
- Extraction connection: 2 x 180 mm, 2 x 120 mm
- Extraction air speed: 20 m/s
- Pneumatic connection: 6 bar
- Working height: 870mm
- Length (with soft disc 2740mm): 2600mm
Pgedovnv Tqjpfx Adxou
- Length with control panel (with soft disc 3035mm): 2985mm
- Width: 880mm
- Height: 1910mm
- Weight approx. 3300 kg
- Operating voltage: 400 Volt, 50 Hz, 3P
- CE-compliant
-----
Price for the machine specified above: On request!
-----
Optional accessories at additional cost:
Workpiece air nozzle cleaning
- Located at the machine outfeed, top and bottom, pneumatically controlled
Sanding belt air jet cleaning, 4-belt
Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...
mažas skelbimas
Neustadt am Rübenberge
989 km
šakučių presas
LoewerMinizinkenpresse
Skambinti
Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Kampinė presė mažiems dantukams
Pgodpfxoxch Hns Adxsu
mažas skelbimas
Rödermark
1 168 km
Plieno briaunų šlifavimo staklės
LOEWERSWG
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 11885, Offer 25129
Technical Specifications:
- Abrasive disc diameter: 150 mm
- Swivel head – grinding unit rotatable and pivotable on the articulated arm
- Dust drawer
- Infinitely variable disc speed
- Table dimensions: 1400 x 980 mm
- Table height approx. 870 mm
- Drive: 400 V / 0.75 kW
- Pneumatic connection: 6 bar
- Space requirements approx.: W 1700 x H 1700 x D 1300 mm
Pedpfx Adowpthmoxsgu
- Weight approx. 400 kg
Atraskite daugiau naudotų mašinų
mažas skelbimas
Vokietija
999 km
Šlifavimo staklės
LoewerSWG
Skambinti
Gamybos metai: 2014, Sąlyga: paruoštas naudoti (naudotas), Parduodama Löwer vibracinė šlifavimo staklė. Šlifavimo skersmuo: 150 mm, stalo matmenys X/Y: apie 1400 mm/1000 mm, stalo aukštis: 870 mm, staklių matmenys X/Y/Z: apie 1700 mm/1700 mm/1300 mm, svoris: apie 400 kg. Galima apžiūra vietoje.
Pjdpfx Aow U T U Ajdxsgu
mažas skelbimas
Kaufungen
1 042 km
Lakštinio metalo šalinimo mašina
LoewerCross Master DD 300
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2012, 1 naudota apipjaustymo ir briaunų apvalinimo staklė
Gamintojas: Loewer
Tipas: Cross Master DD 300
Pagaminimo metai: 2012
Darbinis plotis: 300 mm
Diskiniai varikliai: 2×1,5 kW, 750 aps/min
Disko skersmuo: 400 mm
Pgodpfxow Imucs Adxeu
Dirbinio storis: 0,3 iki 100 mm
Bežingsnis padavimo greitis: 1 iki 6 m/min
Bežingsnio greičio reguliavimas (pasirenkama): 300-1100 aps./min
Ištraukimo jungtis: 150 mm
Staklių matmenys (I×P×A): 1.600 x 1.800 x 1.700 mm
mažas skelbimas
Dinkelsbühl
1 144 km
Šlifavimo staklės
Loewer
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11055, Šlifavimo staklės Löwer DiscMaster Compact DM2DBECO (pagamintos 2008 m.)
Aprašymas:
Naudotos nušlifavimo ir tarpinio šlifavimo staklės „DiscMaster Compact“ iš Löwer, tinkamos itin tiksliam briaunų užapvalinimui, galutiniam šlifavimui ir medienos detalių nušlifavimui. Staklės turi diskinę stotį su šlifavimo diskais, spiraliniais velenais bei prispaudimo volais.
Būklė ir komplektacija:
Psdew Nbtcspfx Adxogu
Matomos kelios montuotos šlifavimo agregatų pozicijos, prie staklių yra šepečiai ir diskai (žr. nuotraukas)
Transporto juosta su nusidėvėjimais ant konvejerio – būtina keisti
Šiuo metu staklės sandėliuojamos, profesionaliai išmontuotos ir be deformacijų
Vieta ir pristatymas:
Vieta: 91550 Dinkelsbühl
Incoterms: EXW Dinkelsbühl (pakrauta kieme) – atsiėmimas, transportavimas, draudimas pirkėjo sąskaita
Teisinė informacija:
Parduodama be garantijos
Tik įmonėms
mažas skelbimas
Aalen
1 175 km
Šlifavimo staklės
LoewerLeistomat SD Video
Skambinti
Sąlyga: naujas, Number of sanding units: 8 pcs.
Sanding width: 180 (260) mm
Max. sanding height: 160 mm
Dimensions (L/W/H): 3065x1600x1900 mm
Machine weight approx. 1500 kg
LÖWER-Leistomat SD
-----
Automatic fine sanding machine for wood sanding (smoothing, denibbing, and edge breaking) or intermediate sanding of profiled window bars. Features Softdisc technology for visible surfaces as well as automatic profile and width adjustment.
- 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm
1 top-mounted softdisc unit Ø=200mm, 0.75kW,
1 top-mounted lamella roller unit L=200mm, 0.75kW,
1 bottom-mounted softdisc unit Ø=200mm, 0.75kW,
1 bottom-mounted lamella roller unit L=200mm, 0.75kW,
2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm
- All sanding units feature linear guidance via linear ball bearing sets on hardened shafts
- Time-controlled dipping of all lamella roller units directly over the entering edges of the workpieces. This dipping allows the units to be set deeper into the profiles.
- Motorized workpiece thickness adjustment
- Variable sanding lamella speed via frequency converters for adjusting the sanding intensity (separate for discs, wide rollers, and side rollers)
- Disc units as Softdisc with hook-and-loop fastening for sanding discs (wood sanding)
- Infeed via three lower and one upper conveyor belts and spring-loaded pressure rollers, with infinitely variable speed 4–15m/min
- Touch panel adjustment of parameters: workpiece thickness, workpiece width (left side units individually), dipping depth of side units, spindle speed, feed speed
- Parameter storage as machine programs in program mode
- Operation in automatic mode with non-contact workpiece width detection and profile recognition as well as automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset)
- Pneumatically sequenced powered infeed roller, automatic clamping of the workpiece, and feeding after unit adjustment
- Signal lights red/green for operation status indication
- Shortest workpiece length: 380mm
- Conveyor belt width: 200mm
- Max. workpiece width: 180mm (260mm possible with flipping process)
- Workpiece height: 12–160mm
- Extraction ports: 4 x 100mm and 2 x 80mm diameter
- Sensor-controlled tool air blast directly at the discs
Pgodpsvnv Uhefx Adxsu
- Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm
- Total length: 4365 mm (including roller conveyor with integrated workpiece width detection)
- Weight: 1500 kg
- Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar
- CE compliant
-----
Price of the above machine on request!
-----
Optional accessories (surcharge):
Set of replacement lamella strips for Leistomat SD-200
consisting of
Wide units:
30 strips EH45 / 200 - 7 (rollers)
30 strips EH45 / 200 - 20 (rollers)
Rabbet units:
96 strips M55 / 120 - 4
SmartFlex lamella disc Ø200 solid
with 30 grooves 50mm long
Set of replacement lamella strips for SmartFlex lamella disc
consisting of
60 strips M35 / 50 K 180-7 S
Sanding disc VB for Softdisc
D=200mm, grit 220
with velour (hook-and-loop), pack of 100 pcs.
Sanding disc VB for Softdisc
D=200mm, grit 280
with velour (hook-and-loop), pack of 100 pcs.
-----
mažas skelbimas
Nettetal
1 246 km
Rėminis šlifuoklis
LoewerTopspin K KFM
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2000, * Gamintojas: LÖWER
* Mašinos Nr.: 10068
* Gamybos metai: 2000
* Tipas: KFM (žr. gamintojo prospektą)
* Svoris: 220 kg
* Maksimali srovė: 18 A
* Prijungimas: 3 fazių kintamoji srovė, 400 V, 50 Hz
* Apsauga: vietoje sumontuota apsauga 25 A
Mašina buvo naudojama iki pat gamybos pabaigos mūsų įmonėje, visada veikė patikimai ir be problemų.
Guoliai atnaujinti. Mašina paruošta darbui, turi nedidelius naudojimo žymių.
Podpfx Asw N Sh Dsdxogu
Techniniai duomenys pateikiami pridedamame PDF faile.
Atsiėmimas adresu 41334 Nettetal.
mažas skelbimas
Vokietija
1 086 km
Tenon frezas
LoewerZA 3000
Skambinti
Sąlyga: naudotas, Gamybos metai: 1984, incl. various slotting and tenoning discs
Used
Manufacturer: Löwer
Model: ZA 3000
Year of manufacture: 1984
Machine no.: 5485
Motor: 1.5 kW
Electromotive brakes
Number of spindles: 2 x vertical saw, horizontal milling spindle
Clamping height: 200 mm
Diameter: 40 mm
Crosscut saw
Pgsdovwf I Ajpfx Adxeu
Table size: 800 mm x 350 mm
Swivelling fence
Stop ruler: 2000 mm, Festo LAS stop system
Manual workpiece clamping
Extraction port: 120 mm
Space requirements: approx. 1700 mm x 1700 mm x 1600 mm
Location: 97447 Gerolzhofen, loaded free on truck, unpacked
Delivery in as-is condition, as inspected,
without overhaul,
without warranty or guarantee
mažas skelbimas
Bad Sooden-Allendorf
1 021 km
Švytuoklinis plaktuvas
LoewerZ 1
Skambinti
Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2788, Crosscut saw, diameter 300 mm
Milling spindle, diameter 40 mm
Sliding table with Festo length stop
Extraction port saw 120 mm
ditto for milling cutter 140 mm
Cables and plug 16 amps,
without operating tools
Podpfx Ajiau I Sjdxjgu
Unfortunately, we cannot respond to enquiries without complete contact details.
mažas skelbimas
Würzburg
1 115 km
Krašto šlifavimo mašina
LoewerKSM 1
Skambinti
Sąlyga: nepatikrintas (naudotas), Sanding belt length: 2280 mm
Sanding belt width: 140 mm
Motor: 2.2 kW
Table length: 1000 mm
Pgodpovrzcljfx Adxou
Cylindrical grinding attachment
Extraction fan
Mobile base
mažas skelbimas
Gerolzhofen
1 085 km
Vienvietės medienos šlifavimo staklės
LoewerTyp RSM 280 S
Skambinti
Sąlyga: naudotas, Gamybos metai: 1975, with new feed belt
Machine fully overhauled, excellent condition
Machine cleaned, completely overhauled, adjusted, test run performed
Table cleaned, aligned, adjusted
Drive roller replaced
Idler rollers cleaned
Pressure rollers adjusted
Sanding shoe fabricated
New window installed in door
Oscillation checked and adjusted
used
Manufacturer: Löwer
Model: RSM 280 S
Year of manufacture: 1975
Machine no.: 3528
Number of belt units: 1 piece
Motors: 5.5 HP
Sanding width: approx. 140 / 150 mm
Sanding height: approx. 120 mm
Belt oscillation
Belt blow-off device
Feed speed: 6 / 11 / 16 m/min
Belt length: approx. 1600 mm
Belt width: approx. 160 mm
Extraction connection: D 100 mm
Required space (LxWxH): approx. 1400 x 1000 x 1600 mm
Pgjdpfxovwgczs Adxju
Weight: approx. 650 kg
Warehouse location: 97447 Gerolzhofen
Sale in as-is condition as inspected
without warranty or guarantee
– free loading –
mažas skelbimas
Gerolzhofen
1 086 km
Vienvietės medienos šlifavimo staklės
LoewerRSM 280 SX
Skambinti
Sąlyga: naudotas, Gamybos metai: 1983, including new feed belt
top condition
Machine overhauled, fully set up
Test grinding with at least 3 mm performed
Various wear parts renewed or replaced
New feed belt
New sanding shoe
New sanding drum
New door glass
Used
Manufacturer: Löwer
Model: RSM 280 SX
Year of manufacture: 1983
Machine no.: 5245
Number of units: 1
Motor: 5.5 kW
Sanding width: approx. 190 mm
Sanding height: approx. 120 mm
3 feed speeds: 6 / 11 / 16 m/min
Belt length: approx. 1600 mm
Belt width: approx. 200 mm
Height display: analogue dial indicator
Combination units roller/shoe
Fixed sanding shoe
Single-belt
Belt air-blast system
Extraction port: D 100 mm
Pedsvwf Nyepfx Adxegu
Required space: approx. 1300 mm x 800 mm x 1700 mm
Weight: approx. 550 kg
Total connected load: approx. 6.5 kW
Location: 97447 Gerolzhofen, free loaded, unpacked
Delivery in as-inspected condition,
without overhaul,
without warranty or guarantee
mažas skelbimas
Vokietija
1 106 km
Liejimo šlifavimo staklės
LöwerLS 200
Skambinti
Sąlyga: naudotas, Gamybos metai: 1989, Naudota mašina
Pagaminimo metai: 1989
Įranga ir techniniai duomenys:
- Stale integruotas transporteris varomas reduktoriniu varikliu
- Integruotas matavimo laikrodis rankenėlėje ir priekinėje stalo dalyje leidžia tiksliai nustatyti nupjaunamos drožlės storį
- Mašina sukonstruota pagal storio nuėmimo (storio obliavimo) principą, t. y. dėl tolygios drožlės nuėmimo šlifavimas atliekamas 1/10 mm tikslumu
Pgodpoww Raiefx Adxou
- Optimalus šlifavimo rezultatas dėl osciliuojančios šlifavimo juostos
- Dėl pneumatiniu būdu valdomos osciliacijos nėra šlifavimo juostos nukrypimo
- Šlifavimo juostos ilgis: 1600 mm
- Šlifavimo juostos plotis: 200 mm
- Stalo ilgis: 1000 mm
- Darbinis aukštis: 120 mm
- Pagrindinis variklis: 5,5 kW
Prieinamumas: trumpu laikotarpiu
Sandėlio vieta: Flörsheim
mažas skelbimas
Vokietija
999 km
Šlifavimo staklės
LÖWERLZ 8
Skambinti
Gamybos metai: 2008, Sąlyga: naudotas, Number of sanding units: 8 pcs.
Sanding width: 150 mm
Still in operation for inspection!
Leistomat - Finishing and Intermediate Sanding Automatic Machine Löwer LZ 8
-----
For finish sanding (smoothing, deburring, and edge rounding) or intermediate sanding of profiled window bars
- Finishing and intermediate sanding machine with eight sanding flap units:
2 top surface units (co-current/counter-current)
2 bottom surface units (co-current/counter-current)
4 profile units arranged diagonally: top right, bottom right, top left, bottom left, all counter-current
- Linear guidance of all sanding units via linear ball bearing sets on hardened shafts
- Time-controlled immersion of all counter-rotating sanding units directly above incoming workpiece edges to prevent over-sanding of primer on end grain edges. Thanks to the immersion function, the units can be set deeper into profiles.
- Time-controlled withdrawal of co-rotating units
- Motorized workpiece thickness adjustment via push-button height adjustment
- Display of workpiece thickness via digital readout with modern magnetic tape system
- Variable sanding flap speed via frequency inverter to adapt sanding intensity to different primers, adjustable between 200-1000 rpm
- Workpiece width detection at machine infeed with automatic adjustment of left sanding units to current workpiece width
- Profile selection via selector switch at machine infeed and automatic adjustment of sanding flap units to selected profile
- Modern PLC control for easy machine operation
- Extraction connection: 5 x 100 mm diameter
- Dimensions (housing): Length x Width x Height (mm): 2600 x 1500 x 1600
Total length: 3600 mm (including roller conveyor with integrated workpiece width detection)
- Operating voltage: 400V, 50Hz, 3-phase, Air connection: 6 bar
- CE compliant
Technical Data:
Number of sanding units: 8 pcs.
Max. surface brush width: 150 mm
Max. working height: 100 mm
Surface brush motor: 0.75 kW
Side brush motor: 0.37 kW
Brush speed: 1380 rpm
Feed motor: 1.1 kW
Feed speed: 4-20 m/min, stepless
Sanding unit speed controller
Automatic width detection
Digital magnetic tape display
Extraction ports: 5 x 100 mm
Air requirement: 5 x 565 m³/h
Minimum air velocity at machine connection: 20 m/s
Dimensions:
Length: 2600 mm
Width: 1480 mm
Height: 1700 mm
Weight: 950 kg
WITH infeed roller conveyor
-----
Price for the above specification on request!
The return conveyor shown in the pictures is NO LONGER available and is NOT part of delivery.
Pgjdoxpi D Uspfx Adxeu
(Technical data as per manufacturer – no guarantee!)
mažas skelbimas
Vokietija
1 153 km
Šepečių šlifavimo staklės LÖWER DiscMaster 3DBB Touch
LöwerDM 3DBB 400
Skambinti
Gamybos metai: 2015, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12162, Technical Specifications:
- Manufacturer: Löwer
- Model: DM 3DBB 400
- Year of manufacture: 2015
- Max. brush width: 1,350 mm
- Max. brush diameter: 400 mm
- Max. working height: 100 mm
- Brush motor – rated power: 2 × 2.5 kW
- Brush motor speed: 1,410 rpm
- Feed motor – rated power: 1.5 kW
- Feed motor speed: 935 rpm
- Disc motor – rated power: 2 × 1.5 kW
- Disc motor speed: 1,410 rpm
Pgodexqf I Eepfx Adxju
- Disc rotation speed: 50–350 rpm
- Vacuum motor – rated power: 7.5 kW
- Vacuum motor speed: 2,800 rpm
- Height adjustment motor – rated power: 0.45 kW
- Height adjustment motor speed: 1,410 rpm
- Brush rotational speed: 30–350 rpm
- Feed speed: 3–15 m/min
- Weight: 1,900 kg
2.5 ELECTRICAL CONNECTION
- Operating voltage: 400 V
- Frequency: 50 Hz
- Fuse provided by customer: 63 A
- Full load current: 47 A
- The cross-section of the supply cable
must be at least AWG 2 (25 mm²).
2.6 PNEUMATIC CONNECTION
- Operating pressure: 6–8 bar
- Maximum pressure: 8 bar
2.7 EXTRACTION CONNECTION
- Connection size: 4 × Ø = 140 mm
- Air requirement: 1,108 m³/h per connection
- Minimum air velocity at machine connection: 20 m/s
- Negative pressure at extraction connection: 1,180 Pa
For blower device:
- Connection size: 3 × Ø = 80 mm
- Air requirement: 390 m³/h per connection
- Minimum air velocity at machine connection: 20 m/s
- Negative pressure at extraction connection: 950 Pa
- Vacuum outlet: 1 × Ø = 200 mm, 300 m³/h
mažas skelbimas
Bad Sooden-Allendorf
1 021 km
Rėminis šlifuoklis
LöwerBSM 400
Skambinti
Sąlyga: naudotas, Gamybos metai: 1982, bendras svoris: 950 kg, Šlifavimo juostos ilgis 2200 mm, šlifavimo juostos plotis 400 mm, stalo ilgis 1200 mm, naudingoji aukštis 120 mm, šlifavimo plotis 390 mm, šlifavimo juostos greitis apie 21 m/s, padavimo greičiai 6 - 11 - 16 m/min, pagrindinis variklis 7,5 kW, padavimo variklis 0,26 - 0,55 - 1 kW, pneumatinė juostos oscilacija ir juostos išpūtimas, įskaitant važiuoklę
Podpfx Adexq Ehxexjgu
mažas skelbimas
Bad Honnef
1 216 km
LÖWER RSM 280 SX formų šlifavimo staklės - naudotos - rėminės šlifavimo staklės
LÖWERRSM 280 SX
Skambinti
Sąlyga: naudotas, Edge sanding machine LÖWER RSM 280 SX -used-
Frame sanding machine
Sanding pad,
Pedpfsu R Tbhjx Adxogu
Oscillation,
Frame sanding device,
Feed belt,
Belt cleaning
----- Technical specifications -----
Sanding width: 190 mm,
Max. workpiece thickness: 120 mm,
Feed speeds: 6, 11, 16 m/min,
Motor: 5.5 kW,
Weight: 550 kg
mažas skelbimas
Wijchen
1 253 km
Šlifavimo staklės Löwer FA 4 S
LöwerFA 4 S
Skambinti
Sąlyga: naudotas, Poliravimo ir apdailos automatas
Löwer FA 4 S
Pagaminimo metai: 1998
Mašinos Nr.: 9667
400 V, 14,5 A.
4 x 0,37 kW variklis
Darbinis ilgis: 3000 mm
Matmenys: 5000 x 1850 x 1600 mm (I x P x A), svoris 550 kg.
- Dokumentacija: Taip
Finansinė informacija
PVM: Nurodyta kaina be PVM
PVM / skirtumo apmokestinimas: PVM atskaitomas įmonėms
Pristatymas ir atpirkimas galimi bet kada iš visų pramonės sričių
Podpfx Aownh Avjdxjgu
Yorick Diebels
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas
Aalen
1 175 km
Šlifavimo staklės
LÖWERMiniSpin N
Skambinti
Sąlyga: naujas, Number of sanding units: 1
Sanding width: 150 mm
Maximum sanding height: 150 mm
Löwer Edge Finishing Machine MiniSpin N
-----
Machines for final and intermediate sanding of edges and profiles, featuring a sanding spindle that can be set horizontally or vertically.
Motor: 0.75 kW
Spindle in vertical position for processing edges
Spindle in horizontal position, pivoted to the side, for processing longer profile rods, etc., or in combination with a combo sanding head for sanding edges with a flap disc
Sanding head pivotable +/- 20° for processing angled edges
Working height / width: 150 mm
Max. roller/brush diameter: < 300 mm
Frequency inverter for stepless spindle speed adjustment: 200 - 800 rpm
Table size: 400 x 800 mm
Two selectable rotation directions
Operating voltage: 110 / 240 V, 50 / 60 Hz
Extraction port: D=100 mm
Weight: approx. 100 kg
Including slotted base body D=180, L=150, fitted with Smartflex abrasive flaps
Pgjdpjxmk Ayjfx Adxeu
CE version
-----
Machine in the above specification available on request!
-----
Optional accessories at extra cost:
Additional combo sanding head for MiniSpin N: EUR 740.00
Consisting of a sanding disc D=180 mm with 20 slots and a sanding roller D=180 mm L=75 mm with 36 slots, fitted with SmartFlex abrasive flaps
Combo sanding head for MiniSpin N instead of standard sanding head: Surcharge EUR 110.00
Consisting of a sanding disc D=180 mm with 20 slots and a sanding roller D=180 mm L=75 mm with 36 slots, fitted with SmartFlex abrasive flaps
Additional standard sanding head: EUR 630.00
D=180 mm L=150 mm, fitted with SmartFlex abrasive flaps
-----
(Technical data as per manufacturer's information - no liability accepted!)
mažas skelbimas
Vokietija
1 153 km
Šlifavimo staklės Löwer tipas ESM 400S
LöwerESM 400S
Skambinti
Sąlyga: naudotas, Gamybos metai: 1991, mašinos/transporto priemonės numeris: 7379, Sanding machine for frames, mouldings, stair treads, furniture parts, etc.
Pedpfx Adew Hx Umexogu
- Manufacturer: Löwer
- Model: ESM400S
- 1 longitudinal sanding belt
- 1 extraction brush
- Year of manufacture: 1991
- Sanding width: 390 mm
- Sanding height: 120 mm
- Table length: 1,300 mm
- Sanding belt speed: 1,300 m/min
- Sanding belt length: 1,800 mm
- Sanding belt width: 400 mm
- Electric height adjustment
- Sanding belt oscillation
- Conveyor feed: 3/6/12 m/min
- Machine length: 1,400 mm
- Machine width: 1,220 mm
- Machine height: 1,900 mm
- Extraction connection: D140 + 80 mm
- Air connection: 6 bar
- Weight: 650 kg
- Location: Warehouse D-32825 Blomberg
mažas skelbimas
Aalen
1 175 km
Šlifavimo staklės
LÖWERDSM 2000
Skambinti
Sąlyga: naujas, Number of sanding units: 2 pcs
Sanding width: 190 mm
Max. sanding height: 2–180 mm
LÖWER Double-Sided Sanding Machine DSM 2000
-----
Double-sided single-piece wood sanding machine for processing solid wood such as window profiles, etc. Robust, heavy-duty design with long cast-iron tables, brushing and finishing attachments, and conveyor feed. Suitable for continuous heavy-duty operation even with high material removal rates.
- Offset, top and bottom sanding and finishing units
- Direct-driven, rubber-coated sanding rollers for slip-free power transmission
- Combination sanding via roller and pad for high material removal and an even contact area
- Maintenance-free and wear-free CERMET-coated sanding pads, featuring excellent thermal conductivity and dimensional stability
- External cooling of sanding zones for cooler grinding and extended sanding belt life
- Forced, pneumatically controlled sanding belt oscillation
- Effective dust extraction directly at sanding rollers; air-borne dust extraction at pressure rollers
- Integrated brushing and finishing unit with large dust extraction system
- Motorized sanding thickness adjustment via precision leadscrews and large-diameter linear ball bearing sets on case-hardened and ground precision shafts, featuring dust and dirt protection
- Chip removal adjustment from below via precision leadscrew with indicator ring (resolution: 0.1 mm)
- Sanding belt tensioning via pneumatic cylinder for constant tension
- Quick-change sanding belts with pneumatic belt release in seconds
- Sanding belt run can be adjusted when changing belts
- Electro-pneumatic air pressure monitoring
- Infeed protection via contact roller for oversized workpieces
- Workpiece transport on calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast-iron tables with finely planed surface, spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for smooth and uniform workpiece feeding
- Feed gear motor with three selectable feed speeds for quick adaptation to various wood types
- All motors electrically protected
- Ergonomically arranged controls at the workpiece infeed side
- Automatic workpiece thickness sensing (no pre-measurement required)
- Digital thickness display (resolution: 0.1 mm) with modern magnetic tape system
Technical Data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800 mm
- Sanding belt width: 200 mm
- Working width: 190 mm
- Sanding thickness: 2–180 mm
Pgodpfx Adevu Hdtjxou
- Two brake motors for drive: 5.5 kW
- Feed motor: 1.0 kW
- Feed speeds: 6, 11, and 16 m/min
- Automatic height adjustment: 0.37 kW
- Two brushing units with fiber brushes D 120 × 200 mm at 0.37 kW each
- Extraction ports: 2 × 120 mm and 2 × 150 mm
- Pneumatic connection: 6 bar
- Working height: 850 mm
- Length: 2105 mm
- Length with control panel: 2490 mm
- Width: 880 mm
- Height: 1910 mm
- Weight: approx. 1500 kg
- Operating voltage: 400 Volt, 50 Hz, 3 phase
- CE compliant
-----
Base price of the machine on request!
-----
Optional accessories at additional cost:
Infinitely variable feed 4–20 m/min.
for speed adjustment...
mažas skelbimas
Oberkochen
1 179 km
Šlifavimo staklės
LÖWERDSM 2004 Video
Skambinti
Sąlyga: naudotas, Number of sanding units: 4 pcs
Sanding width: 190 mm
Max. sanding height: 180 mm
Control: yes
Weight: 3300 kg
Dimensions (L/W/H): 2600x920x1890 mm
Extraction port diameter: 2x180, 2x120 mm
Double-sided sanding machine Löwer DSM 2004
Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc.
Heavy-duty premium model with innovative features. Suitable for continuous high-load operations, even with higher material removal rates.
- Sequentially arranged sanding units for pre-sanding, fine sanding, and final sanding, each from top and bottom
1. Belt sanding unit with heavy steel roller
2. Belt sanding unit with rubberized roller and pad
3. Finishing unit with fiber brush
- Direct drive sanding rollers for slip-free power transmission
- Maintenance-free, wear-free CERMET-coated sanding pads with excellent heat conductivity and absolute dimensional stability
- Independent cooling of sanding zones for cooler sanding and longer belt life
- Forced, pneumatically controlled sanding belt oscillation
- Highly effective sanding dust extraction directly at the sanding rollers
- Dust extraction at tensioning pulleys
- Integrated brushing and finishing unit with large dust extraction
- Motorized sanding thickness adjustment via precision lead screws and large-dimension linear ball bearings on hardened and ground precision rods, with dust and dirt protection
- Material removal adjustment on bottom via precision lead screw with scale ring indicator (resolution 0.1mm)
- Sanding belt tensioning by pneumatic cylinder with constant tension pressure
- Quick sanding belt change with pneumatic release within seconds
- Sanding belt tracking adjustment during belt changes
- Electro-pneumatic air pressure monitoring
- Infeed safety via contact roller for oversized workpieces
- Workpiece transport by calibrated, non-slip, high-grip conveyor belts over heavy cast-iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for jerk-free and uniform workpiece transport
- Feed gear motor with stepless speed variation of 4-20 m/min
- All motors electrically protected
- Ergonomically arranged controls
- Digital thickness display (resolution 0.1 mm) with modern magnetic tape system
Technical Data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800 mm
- Sanding belt width: 200 mm
- Working width: 190 mm
- Sanding thickness: 2-180 mm
- Four brake motors for drive: 5.5 kW
- Feed motor: 1.5 kW
- Feed speed: 4-20 m/min
- Automatic height adjustment: 0.37 kW
- Two brush units with fiber brushes D 120 x 200 mm, each 0.37 kW
- Extraction nozzles: 2 x 180mm, 2 x 120mm
- Extraction air speed: 20 m/s
- Pneumatic connection: 6 bar
- Working height: 870 mm
- Length (with soft disc 2740 mm): 2600 mm
- Length with control section (with soft disc 3035 mm): 2985 mm
- Width: 880 mm
- Height: 1910 mm
- Weight: approx. 3300 kg
- Operating voltage: 400 Volt, 50 Hz, 3 phase
- CE design
Equipped with the following options:
- 4-belt sanding belt air jet cleaning,
arranged via nozzles directly at the radii of the tensioning pulleys within the extraction hood, can be activated individually
Pgedpfx Asvu Hgbsdxou
- Disc unit for edge deburring
- Two sanding flap discs with 200 mm diameter (max. sanding width 180 mm)
- side ...
Palengviname jums paiešką: "loewer"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
































































































































