Šlifavimo staklėsLoewer
DSM 2000
Šlifavimo staklės
Loewer
DSM 2000
Sąlyga
Naujas
Vieta
Aalen 

Rodyti vaizdus
Rodyti žemėlapį
Duomenys apie mašiną
Kaina ir vieta
- Pardavėjo vieta:
- Elisabethenstr. 41, 73432 Aalen, Vokietija
Skambinti
Mašinų pardavimas

Radote naują mašiną? Dabar seną pavertkite pinigais.
Pasiekite geriausią kainą per Machineseeker.
Daugiau apie mašinų pardavimą
Daugiau apie mašinų pardavimą
Pasiūlymo informacija
- Sąrašo ID:
- A18375791
- Nuorodos Nr.:
- 1305-5580
- Naujinta paskutinį kartą:
- Data 2025.05.19
Aprašymas
Number of sanding units: 2 pcs
Sanding width: 190 mm
Max. sanding height: 2–180 mm
LÖWER Double-Sided Sanding Machine DSM 2000
-----
Double-sided single-piece wood sanding machine for processing solid wood such as window profiles, etc. Robust, heavy-duty design with long cast-iron tables, brushing and finishing attachments, and conveyor feed. Suitable for continuous heavy-duty operation even with high material removal rates.
- Offset, top and bottom sanding and finishing units
- Direct-driven, rubber-coated sanding rollers for slip-free power transmission
- Combination sanding via roller and pad for high material removal and an even contact area
- Maintenance-free and wear-free CERMET-coated sanding pads, featuring excellent thermal conductivity and dimensional stability
- External cooling of sanding zones for cooler grinding and extended sanding belt life
- Forced, pneumatically controlled sanding belt oscillation
- Effective dust extraction directly at sanding rollers; air-borne dust extraction at pressure rollers
- Integrated brushing and finishing unit with large dust extraction system
- Motorized sanding thickness adjustment via precision leadscrews and large-diameter linear ball bearing sets on case-hardened and ground precision shafts, featuring dust and dirt protection
- Chip removal adjustment from below via precision leadscrew with indicator ring (resolution: 0.1 mm)
- Sanding belt tensioning via pneumatic cylinder for constant tension
- Quick-change sanding belts with pneumatic belt release in seconds
- Sanding belt run can be adjusted when changing belts
- Electro-pneumatic air pressure monitoring
- Infeed protection via contact roller for oversized workpieces
- Workpiece transport on calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast-iron tables with finely planed surface, spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for smooth and uniform workpiece feeding
- Feed gear motor with three selectable feed speeds for quick adaptation to various wood types
- All motors electrically protected
- Ergonomically arranged controls at the workpiece infeed side
- Automatic workpiece thickness sensing (no pre-measurement required)
- Digital thickness display (resolution: 0.1 mm) with modern magnetic tape system
Technical Data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800 mm
- Sanding belt width: 200 mm
Credpfxovu Hdtj Aa Seh
- Working width: 190 mm
- Sanding thickness: 2–180 mm
- Two brake motors for drive: 5.5 kW
- Feed motor: 1.0 kW
- Feed speeds: 6, 11, and 16 m/min
- Automatic height adjustment: 0.37 kW
- Two brushing units with fiber brushes D 120 × 200 mm at 0.37 kW each
- Extraction ports: 2 × 120 mm and 2 × 150 mm
- Pneumatic connection: 6 bar
- Working height: 850 mm
- Length: 2105 mm
- Length with control panel: 2490 mm
- Width: 880 mm
- Height: 1910 mm
- Weight: approx. 1500 kg
- Operating voltage: 400 Volt, 50 Hz, 3 phase
- CE compliant
-----
Base price of the machine on request!
-----
Optional accessories at additional cost:
Infinitely variable feed 4–20 m/min.
for speed adjustment...
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Sanding width: 190 mm
Max. sanding height: 2–180 mm
LÖWER Double-Sided Sanding Machine DSM 2000
-----
Double-sided single-piece wood sanding machine for processing solid wood such as window profiles, etc. Robust, heavy-duty design with long cast-iron tables, brushing and finishing attachments, and conveyor feed. Suitable for continuous heavy-duty operation even with high material removal rates.
- Offset, top and bottom sanding and finishing units
- Direct-driven, rubber-coated sanding rollers for slip-free power transmission
- Combination sanding via roller and pad for high material removal and an even contact area
- Maintenance-free and wear-free CERMET-coated sanding pads, featuring excellent thermal conductivity and dimensional stability
- External cooling of sanding zones for cooler grinding and extended sanding belt life
- Forced, pneumatically controlled sanding belt oscillation
- Effective dust extraction directly at sanding rollers; air-borne dust extraction at pressure rollers
- Integrated brushing and finishing unit with large dust extraction system
- Motorized sanding thickness adjustment via precision leadscrews and large-diameter linear ball bearing sets on case-hardened and ground precision shafts, featuring dust and dirt protection
- Chip removal adjustment from below via precision leadscrew with indicator ring (resolution: 0.1 mm)
- Sanding belt tensioning via pneumatic cylinder for constant tension
- Quick-change sanding belts with pneumatic belt release in seconds
- Sanding belt run can be adjusted when changing belts
- Electro-pneumatic air pressure monitoring
- Infeed protection via contact roller for oversized workpieces
- Workpiece transport on calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast-iron tables with finely planed surface, spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for smooth and uniform workpiece feeding
- Feed gear motor with three selectable feed speeds for quick adaptation to various wood types
- All motors electrically protected
- Ergonomically arranged controls at the workpiece infeed side
- Automatic workpiece thickness sensing (no pre-measurement required)
- Digital thickness display (resolution: 0.1 mm) with modern magnetic tape system
Technical Data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800 mm
- Sanding belt width: 200 mm
Credpfxovu Hdtj Aa Seh
- Working width: 190 mm
- Sanding thickness: 2–180 mm
- Two brake motors for drive: 5.5 kW
- Feed motor: 1.0 kW
- Feed speeds: 6, 11, and 16 m/min
- Automatic height adjustment: 0.37 kW
- Two brushing units with fiber brushes D 120 × 200 mm at 0.37 kW each
- Extraction ports: 2 × 120 mm and 2 × 150 mm
- Pneumatic connection: 6 bar
- Working height: 850 mm
- Length: 2105 mm
- Length with control panel: 2490 mm
- Width: 880 mm
- Height: 1910 mm
- Weight: approx. 1500 kg
- Operating voltage: 400 Volt, 50 Hz, 3 phase
- CE compliant
-----
Base price of the machine on request!
-----
Optional accessories at additional cost:
Infinitely variable feed 4–20 m/min.
for speed adjustment...
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
DOKUMENTAI
18375791-01.pdf (PDF)Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2002
Pateikti užklausą
Telefonas & Faksas
+49 7364 ... skelbimai
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida