Dvipusis šlifuoklis

Loewer DSM 2000

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 190 mm Max. sanding height: 2–180 mm LÖWER Double-Sided Sanding Machine DSM 2000 ----- Double-sided single-piece wood sanding machine for processing solid wood such as window profiles, etc. Robust, heavy-duty design with long cast-iron tables, brushing and finishing attachments, and conveyor feed. Suitable for continuous heavy-duty operation even with high material removal rates. - Offset, top and bottom sanding and finishing units - Direct-driven, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad for high material removal and an even contact area - Maintenance-free and wear-free CERMET-coated sanding pads, featuring excellent thermal conductivity and dimensional stability - External cooling of sanding zones for cooler grinding and extended sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at sanding rollers; air-borne dust extraction at pressure rollers - Integrated brushing and finishing unit with large dust extraction system - Motorized sanding thickness adjustment via precision leadscrews and large-diameter linear ball bearing sets on case-hardened and ground precision shafts, featuring dust and dirt protection - Chip removal adjustment from below via precision leadscrew with indicator ring (resolution: 0.1 mm) Dwsdovu Hdtepfx Alxsc - Sanding belt tensioning via pneumatic cylinder for constant tension - Quick-change sanding belts with pneumatic belt release in seconds - Sanding belt run can be adjusted when changing belts - Electro-pneumatic air pressure monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport on calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast-iron tables with finely planed surface, spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feeding - Feed gear motor with three selectable feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls at the workpiece infeed side - Automatic workpiece thickness sensing (no pre-measurement required) - Digital thickness display (resolution: 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speeds: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brushing units with fiber brushes D 120 × 200 mm at 0.37 kW each - Extraction ports: 2 × 120 mm and 2 × 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3 phase - CE compliant ----- Base price of the machine on request! ----- Optional accessories at additional cost: Infinitely variable feed 4–20 m/min. for speed adjustment...

Būklė: naujas, Number of grinding units: 4 pcs Sanding width: 190 mm Max. sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single piece wood sanding machine with additional cross brushing unit (discs) and longitudinal brushing unit (roller) for sanding solid wood such as window scantlings, etc. Robust top-quality construction with long cast iron tables and conveyor belt feed. Suitable for heavy-duty continuous operation, even with higher material removal rates. 1. Belt sanding unit with CERMET sanding shoe for pre-sanding 2. Disc unit for cross sanding to remove fibers 3. Roller unit for longitudinal sanding to achieve a directed finish along the grain - Offset arrangement of sanding and finishing units above and below - Directly driven rubber-coated contact rollers for slip-free power transmission - Combined sanding via roller and shoe for high material removal rates with a flat engagement zone at the same time - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and increased belt life - Forced, pneumatically controlled belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at the tension rollers - Integrated brush sanding units (crosswise and lengthwise) with dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment at the bottom via precision spindle with readout by scale ring (resolution 0.1 mm) - Sanding belt tension via pneumatic cylinder with constant tension - Sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece transport via calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feed - Continuously variable feed gear motor for fast adaptation to various wood types - All motors electrically protected - Ergonomically arranged operating controls at the infeed side - Digital thickness display (0.1 mm resolution) with a modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Belt length: 1800 mm - Belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units Disc D=max. 200 mm Roller D=max. 270 mm - Extraction connections: 2 x 120 mm and 2 x 180 mm Dwodpfxjyrty Hs Alxec - Pneumatic connection: 6 bar - Working height: 870 mm External dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant ----- Price of the above-mentioned machine upon request! ----- Optional accessories at an extra charge: Workpiece air blow-off - medium...

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 10229, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 25 000 h, galia: 13 kW (17,68 AG), įėjimo įtampa: 400 V, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 200 mm, šlifavimo juostos ilgis: 1 800 mm, šlifavimo aukštis: 190 mm, aukščio reguliavimo tipas: elektrinis, pavaros tipas: elektrinis, bendras aukštis: 1 890 mm, bendras ilgis: 2 070 mm, bendras plotis: 1 020 mm, bendras svoris: 1 500 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Įrenginys labai geros būklės, mažai naudotas, yra galimybė atnaujinimui pagal susitarimą. Dwedoyt Hkujpfx Alxsc