Klink Mašina pirkti naudotą (38 516)

Sąlyga: geras (naudotas), Gamybos metai: 1980, Info: The machine was installed in a pit! - Traction force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 – 10 m/min - Return speed: 7 – 25 m/min - Total connected load: 45 kW - Machine weight: 5,500 kg Codeydlq Iopfx Af Tjgn

Sąlyga: geras (naudotas), Gamybos metai: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Tool feeder stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Codpjydlqzsfx Af Tegn - Machine weight: 12,410 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1989, mašinos/transporto priemonės numeris: 2882, Išpjovimo staklės Cgsdpfex Ey Ulsx Af Tjn Duomenys žr. priede

Gamybos metai: 1999, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Cgedpfjr A Hcbox Af Ten Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Gamybos metai: 1971, Sąlyga: labai geros būklės (naudotas), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Cgedpfx Afshpqque Tjn Max. tool diameter: Ø 95 mm Weight: 4.8 t

Sąlyga: geras (naudotas), The machine, used for washing fruit and olives, is in good condition. Cgjdjvtf T Depfx Af Ten

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 03.2456, CNC internal broaching machine Cgedpfeirwiqex Af Tjn Arthur Klink RISH 6.3X1000X400 Overhauled in 2016

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2012, Parduodama Karl Klink vertikali vidaus broširavimo staklės (broširavimo bokštas) su keliamuoju stalu ir pakrovimo portalu. Broširavimo jėga: 63 kN, broširavimo eiga: 1000 mm, verpstės eiga: 400 mm, broširavimo greitis: 7,5 m/min, grįžimo greitis: 24 m/min, stočių kiekis: 1, stalo plotis: 500 mm. Staklių matmenys X/Y/Z: apie 3700 mm/3000 mm/3200 mm, svoris: apie 3500 kg. Yra dokumentacija. Galima apžiūra vietoje. Cgjdpfxexwcvmo Af Ten

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, bendras svoris: 2 900 kg, galia: 8 kW (10,88 AG), įėjimo įtampa: 380 V, brochavimo pozicijų skaičius: 1, bendras plotis: 6 100 mm, bendras aukštis: 1 900 mm, Manufacturer: Karl Klink Model: RW 10 Cjdpextcz Isfx Af Tsgn Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of the pull head holder on the drawbridge: 85 mm Broaching tool clamping: universal pull head for flat shanks up to 25 mm wide Pass-through hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine housing of the tool feeder) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special features: • The machine is equipped with a manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine has a simple oil drip tray mounted on the machine bed without a tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching tools, arbors, and pull heads can be supplied.

Gamybos metai: 1993, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Cjdpfx Afscc D Ddj Tjgn Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Gamybos metai: 1983, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg Cjdpfxod Nb A Nj Af Tegn General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Holder diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically adjustable steplessly from 1 m/min up to max. 10 m/min Return speed: hydraulically adjustable steplessly from 5 to max. 25 m/min Machine footprint (W x D x H): approx. 5500 x 2800 x 4900 mm (from pit base) Power supply / Connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated pull heads DIN 1417/18 to lock the broaching tools in the pull bridge. The needle lifting heads in the tool loader are hydraulically locked. The machine features a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production; for optimal utilization, a foundation (pit) is ideally required. Pull heads and needle lifters are available on request. The machine can be inspected at our warehouse.

Gamybos metai: 1962, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 10,000 kg Broaching length: 1,200 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Holder diameter for broach heads: 3 x Ø ___mm Cedst Dwb Depfx Af Tegn Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in both the draw bridge and the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation (pit) or alternatively a platform. Broach heads and mandrel ejectors are available upon request. The machine can be inspected at our warehouse.

Gamybos metai: 1960, Sąlyga: naudotas, max. pulling force: 20,000 kg Cgodpoui Sbofx Af Tsn max. lift: 1,250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine features an automatic tool feeder and is designed for manual series production. The tool locking mechanism in the pull bridge, as well as in the tool feeder, operates via spring mechanism (pull head DIN 1417).

Gamybos metai: 1956, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine No.: 1413 General information / Technical data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition Pulling force: 13,000 kg (maximum) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Clamping diameter of pull head: Ø 85 mm Passage width between cylinders: max. 390 mm Cutting speed: hydraulically and steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically and steplessly adjustable from 7 m/min to max. 25 m/min Machine dimensions (W x D x H): approx. 1150 x 1500 x 3725 mm (tool feeder extended) Power supply / Connected load: 380 Volt 50Hz / 7.5 kW Accessories / Special equipment: The traverse of the machine is equipped with 3 broaching tool holders, while the workpiece table has 1 broaching station (modifiable). The tool clamping system as well as the tool feeder are designed for a spring-actuated locking mechanism (DIN 1415). The machine is fitted with an automatic tool feeder; the available feeder mount is suitable for just one tool (center broaching station). The machine is equipped with an integrated coolant system for cutting oil. Csdpfx Ajdbmgmsf Tegn Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production with medium batch sizes. The machine features an automatic cycle. For operation, ideally a machine pit or alternatively a pedestal is required. Pull heads, tool holders & tools are available upon request. The machine can be inspected under power at our warehouse.

Gamybos metai: 1951, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal broaching machine, in good, operational condition Broaching stroke: 1500 mm Broaching stations: 1 unit Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Thru-hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Csdpsdcdrpefx Af Tjgn Cutting speed: hydraulically continuously adjustable from 2 m/min to 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • The machine includes an integrated coolant-lubrication system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is clean in the area of the guides and cylinder. On request, broaching needles as well as broaching mandrels can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1980, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25 x 2500 x 500 Year of Manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic broaching machine with 3 broaching stations, in very good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping diameter of draw heads: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connection rating: 380V / 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. Previously, a sliding workpiece table was mounted on the machine, equipped with a special external broaching clamping device (workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic lock both in the draw bridge and the feeder. The machine is fitted with a coolant unit including integrated chip conveyor. Cedpjdffzfsfx Af Tegn Remarks: The machine is in very good condition and retains its original paint. It is designed for use in series production, ideally requiring a foundation (pit) for optimal operation. Draw heads and ejector needles are available on request. The machine can be inspected in our warehouse.

Gamybos metai: 1962, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine No.: 1790 General / Technical Data: Hydraulic horizontal internal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically adjustable, stepless from 1 m/min to 7 m/min Return speed: hydraulically adjustable, stepless from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without working area) Power supply: 380 V / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special Features: Csdpfxsdl Uzko Af Tegn • The machine is equipped with a universal pull head for flat shanks • Refrigerant / lubrication system • Without tool feeder • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for manufacturing keyway slots. On request, broaching needles and mandrels can also be supplied. The machine is connected and ready for demonstration under power in our warehouse.

Gamybos metai: 1958, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2,500 kg Cedpfx Asda Ugijf Tjgn General / Technical Data: Used vertical hydraulic internal broaching machine with 1 broaching station, fully operational. Tensile force: 6,000 kg Broaching length: 1,000 mm Draw head diameter: Ø 85 mm Passage width between cylinders: max. 280 mm Cutting speed: hydraulically variable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically variable, stepless from 7 m/min up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / Connected load: 380 Volt, 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 1 broaching station. The tool clamping system is designed for mechanical spring locking (DIN 1415). An integrated coolant system is included. The machine features a double draw head for two flat broaching tools with workpiece support plate. Remarks: The machine is in age-appropriate good condition and ready for immediate use. It is designed for manual operation in medium-batch production. Installation ideally requires a machine pit or, alternatively, a platform. Draw heads are available on request. The machine does not have a tool loader. The machine can be inspected under power at our warehouse.

Gamybos metai: 1955, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2950 kg Machine No.: 1331 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-for-operation condition Broaching length: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal draw head for flat shanks up to 26 mm width Through bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically and infinitely adjustable from 1 m/min to 7 m/min Return speed: hydraulically and infinitely adjustable from 7 m/min to 25 m/min Cgodpfodbr H Tex Af Tjn Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (excluding working area) Power supply / connected load: 380 V 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special Equipment: • The machine is equipped with a universal draw head for flat shanks • The machine features a movable coolant/lubricant system for two media • The machine includes an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly and is very clean in the guide and cylinder areas. Broaching needles as well as mandrels can be supplied upon request. The machine is connected and available for inspection and demonstration at our warehouse.

Gamybos metai: 1960, Sąlyga: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Cgedpfogyd S Sox Af Tsn Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1994, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Cgedegyd T Espfx Af Ton Power Supply: 400V / 50Hz

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: horizontal broaching machine Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine, in good condition for its age, with a manually operated heavy-duty tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Holder in traverse: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface / workpiece area: Ø 460 mm Maximum workpiece diameter: approx. 750 mm (limited by the tool feeder's tray) Cutting speed: hydraulically variable, from 1.0 m/min to 7 m/min Return speed: hydraulically variable, from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6,500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Machine is equipped with mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manual tool feeding • Broaching carriage with pull head holder is guided flat on both sides • Adjustable tensile force limiter Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for traverse from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for manufacturing keyways using flat broaching tools as well as for profile broaching. Due to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and, in view of its age, in very good condition. It is currently stored in our warehouse and can be inspected under power. The machine has not been refurbished technically or visually, but is ready for immediate use. Cgedpjr A Hdgjfx Af Ten Profile broaching pull heads are mostly available used upon request, depending on DIN standard, dimensions, and stock. Direct contact details and further information can be found in the attached PDF document.

Gamybos metai: 1964, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Cgjdpfst Dv I Ajx Af Tsn Mounting diameter for pull heads: 3 x Ø ___ mm Cutting speed: hydraulically infinitely variable from 1 m/min up to a maximum of 7 m/min Return speed: hydraulically infinitely variable from 7 up to a maximum of 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring mechanical locking in the pull bridge and hydraulic-mechanical locking in the feed. The machine underwent an electrical (Siemens S7 PLC) and mechanical retrofit in 2004. The unit is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation pit is recommended, or alternatively, a platform may be used. Pull heads and broach lifters are available upon request. The machine can be inspected at our warehouse.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1966, bendras svoris: 7 000 kg, įėjimo įtampa: 380 V, brošavimo ilgis: 1 500 mm, brochavimo pozicijų skaičius: 3, ruošinio skersmuo (maks.): 575 mm, bendras aukštis: 5 100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700 kg Machine no.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations drawing force: 20,000 kg broaching stroke: 1,500 mm broaching stations: 3 units spacing between broaching stations: 2x145 mm holder diameter for draw heads: 3 x Ø 85 mm passage width between columns: max. 580 mm cutting speed: hydraulically stepless, adjustable from 1 m/min up to max. 7 m/min return speed: hydraulically stepless, adjustable from 7 up to max. 25 m/min machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm height with tool feeder raised) power supply / connection load: 380 Volt 50 Hz / 14 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the draw bridge and in the feeder. The machine is fitted with an integrated coolant system. Notes: The machine is designed for use in series production. For optimal operation, a foundation (pit) is ideally required, alternatively a platform. Draw heads and knockout units are available on request. The machine can be inspected under power at our warehouse. Cgedpewql Rvsfx Af Ton General Information: We constantly have a large selection of approx. 80 used broaching machines with drawing forces from 3,000 kg to 63,000 kg in both horizontal and vertical design in stock. A large part of our in-stock broaching machines is available for demonstration. On request we can offer you used equipment such as draw heads, knockouts, broaching tools and other specific accessories. As a contract broaching shop, we can also assist you with technical questions backed by 50 years of experience in broaching technology.

Gamybos metai: 1985, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Cjdpfjixntwex Af Tjgn Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW