Vertikali vidinė atlenkimo mašina

Karl Klink RSI 8 DT1

Būklė: geras (naudotas), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting up to 10° possible Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric / US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Outreach: 500 mm Number of strokes: 3 – 38 strokes/min Power: 12 kW Lhjdewpud Aepfx Apnsn Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Ledpjr A Hcbofx Apnshn Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Lsdpfx Apegyd T Esnjhn Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz

Būklė: geras (naudotas), Gamybos metai: 1984, Maximum wheel diameter: 250 mm Wheel width: 275 mm Module (max): 6 Machine weight approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all hobbed cylindrical gears such as: - Straight and helical spur gears, worm gears and worms, splined shafts, keyway shafts, serrated gears, chain wheels, ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Maximum workpiece diameter: 250 mm - Maximum module: 6 mm - Maximum axial feed travel: 275 mm - Maximum tangential feed travel: 100 mm - Maximum helix angle: 45 degrees - Maximum cutter diameter: 145 mm Lsdpsv T Nqaefx Apnjhn - Maximum cutter length: 170 mm - Minimum clamping table area: 195 mm - Maximum clamping table area: 470 mm Performance Cutter speeds - Two mechanical ranges: 56 ... 250 rpm - (Standard execution): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special design DC motor): 140 ... 400 rpm Weight - Net machine: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to the table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Visiškai atnaujinta „Haas Multigrind HT“ šlifavimo staklė bus galima įsigyti 2027 m. pirmąjį ketvirtį. Skirta: spiraliniams frezoms / sraigtiniams ratams / pjovimo rotoriams / išilginiams frezoms / pramoniniams peiliams / apskritiminio pjovimo peiliams / dantytiems ratais / skivingo įrankiams / giliai gręžtiems grąžtams ir kitiems ruošiniams / detalėms. Valdymo sistema: „Siemens 840 D“ X ašis – 650 mm Y ašis – 400 mm Z ašis – 280 mm A ašis (sukamoji staklė) – 360 ° SK50 C ašis (sukamasis stalas) – 270 ° X3 ašis – elektrinė, su įvairiakryptės judesio staklėmis Ledpfx Apex Tr H Nonohn Šlifavimo velenas: HSK80 (galimas perėjimas į HSK50) Šlifavimo įtaisas Įrankių keitiklis: 10 vietų talpykla Aušinimo skysčio sistema: „Turbo Separator“ Dulkių šalinimo sistema: LTA CO2 gesinimo sistema Papildomi priedai galima tiekti iš gamyklos Programinė įranga gali būti pritaikyta pagal užsakovo pageidavimus Pristatymas į gamyklą, paleidimas, mokymas ir galutinis priėmimas pas klientą Galima finansuoti / išsimokėti Galimi pakeitimai pagal pageidavimus.

Būklė: naudotas, Räummaschine Lodot Hr Dfopfx Apnshn

Gamybos metai: 1995, būklė: naudotas, mašinos/transporto priemonės numeris: 18891, Tractive force: 10 tons. Stroke: 1000 mm. 3 ejector stations. With chip conveyor and platform for above-ground installation, including safety door. Ledpfx Apsbrcmkenehn

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, bendras aukštis: 1 100 mm, bendras plotis: 300 mm, bendras ilgis: 300 mm, bendras svoris: 60 kg, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, FARO matavimo svirtis su 7 ašimis, lazerinė galva, įvairūs matavimo jutikliai, sunkus montavimo pagrindas, originaliame lagamine; įskaitant CAM2 programinę įrangą su raktu, Laser Line Probe V3 ir įvairius lydinčius dokumentus. Ljdsyq R R Hopfx Apnshn

Gamybos metai: 1987, būklė: paruoštas naudoti (naudotas), An old Schumag Aachen drawing machine without control system is available. Drawing force: 100 kN, drawing speed: 80 m/min, material diameter range: 25 mm - 43 mm. On-site inspection is possible. Ljdpfxov Tctuo Apnohn

Būklė: naudotas, Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 68910, ruošinio svoris (maks.): 5 100 kg, ratlankio plotis: 180 mm, šlifavimo disko skersmuo: 330 mm, sraigtinis kampas: 45 °, sukimosi greitis (min.): 1 100 aps./min, sukimosi greitis (maks.): 1 900 aps./min, įvesties srovės tipas: Oro kondicionierius, ratlankio skersmuo: 10 mm, krumpliaračio skersmuo: 330 mm, bendras svoris: 5 100 kg, bendras aukštis: 2 300 mm, bendras ilgis: 6 000 mm, bendras plotis: 4 500 mm, Ratų skersmuo - maks. 10 - 330 mm Ratų plotis 180 mm Modulis - maks. 7 Modulis - min. 0,5 Tvirtinimo ilgis 420 mm Dantų skaičius 10 - 600 Susukimo kampas - maks. +/- 45° Sukimosi greitis 1100 - 1900 aps./min Šlifavimo disko skersmuo 280 - 350 mm Lhodpfeykrmcox Apnen Šlifavimo disko plotis 84 - 104 mm Staklių svoris apie 5,1 t Reikalingas plotas apie 4,5 x 6,0 x 2,3 m Šlifavimo alyvos valymas Reishauer AF