International 5288 pirkti naudotą (8 888)

Būklė: naudotas, From insolvency: Rilco immersion vibrator 56 mm Knsdpfx Aerkzt Uef Hsa untested

Gamybos metai: 1962, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 10,000 kg Broaching length: 1,200 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Holder diameter for broach heads: 3 x Ø ___mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in both the draw bridge and the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation (pit) or alternatively a platform. Broach heads and mandrel ejectors are available upon request. The machine can be inspected at our warehouse. Kedpjt Dwb Defx Af Hona

Būklė: labai geros būklės (naudotas), Gerai išsilaikiusi vidinio cilindrinio šlifavimo staklė JUNG, modelis 221, su plokščio šlifavimo įranga. Didžiausias ekonomiškai šlifuojamas angos skersmuo: 150 mm. Šlifavimo ilgis be plokščio šlifavimo: 250 mm. Šlifavimo ilgis su plokščio šlifavimo funkcija priklausomai nuo tvirtinimo ilgio iki 250 mm. Didžiausias švytuoklės skersmuo apsauginio gaubto viduje: 350 mm. Veleno centro aukštis virš stalo: 245 mm. Detalės veleno anga: 44 mm. Detalės veleno metrinis kūgio dydis: 50. Detalės veleno apsukos: 58 – 85 – 120 – 170 – 246 – 348 sūkių/min. Stalo greitis greitu judesiu (nuolat reguliuojamas): 10 m/min. Stalo greitis šlifavimo metu (nuolat reguliuojamas): 0 – 8 m/min. Galingumo poreikis: 11 kW. Galingumo poreikis su plokščio šlifavimo įranga: 12,5 kW. Neto svoris apie 3500 kg. Kjdpfx Afey Svz Uj Hsna

Būklė: naudotas, Gamybos metai: 2000, Techniniai duomenys: Traukimo jėga - maks.: 2,5 t Stūmoklio eiga - maks.: 1000 mm Ruoinio skersmuo - maks.: 40 mm Šlifavimo greitis: 60 m/min. Grįžimo greitis: 20 m/min. Bendras galios poreikis: 24 kW Mašinos svoris apie: 6 t Knjdow Dugaopfx Af Hoa Užimamumas apie: 1,7 x 2,4 x 4,77 m Tvirtinimo plokštė: 320 mm Tai yra hidraulinė mašina

Būklė: naudotas, Gamybos metai: 1952, Didžiausias eiga: 220 mm Priedai: taip Staklių svoris: apie 1,4 t Kjdjyn R Nwepfx Af Hjna

Būklė: labai geros būklės (naudotas), Vertex pneumatinė sriegimo staklės su lankstine svirtimi. Sumontuota ant 1800 x 900 mm stalo. Kedpfx Aey Tl Rbef Hena

Gamybos metai: 2018, veikimo valandos: 303 h, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, 2018 m. Cerion GmbH pristatyta vidinio graviravimo įranga beveik neturėjo darbo valandų. Lazeris yra kaip naujas. Naujos įrangos kaina buvo 49 000 €. Supra Laser Solutions GmbH yra Cerion ir Cericom GmbH įpėdinė vidinio graviravimo srityje. Įranga patikrinta gamykloje ir visiškai veikianti. Įrangai, įskaitant lazerį, suteikiama 12 mėnesių garantija. Kedpoxvc Igofx Af Hona

Būklė: geras (naudotas), Made in Germany Smallest economically grindable bore: 6 mm Largest grindable bore: 50 mm Maximum grinding length: 80 mm Maximum clamping diameter: 235 mm Distance from workpiece spindle axis to table center: 145 mm Workpiece spindle speeds: 640 and 1000 rpm Knsdpfxsda A Eis Af Hja Workpiece spindle box swivel angle to one side: 10 degrees Maximum table speed, hydraulically infinitely variable: 12 m/min Maximum distance between workpiece spindle flange and grinding support: 550 mm Power requirement: approx. 8 kW Net weight of the machine: 2000 kg

Būklė: naudotas, Gamybos metai: 2002, Gręžinio skersmuo: 200 mm Knsdpfx Aey Umatef Hea Eiga: 600 mm 2 honavimo verpstės abi su dvigubu mechaniniu/hidrauliniu išplėtimu Apvalus stalas su padalijimu 2 x 180° arba 4 x 90° Idealu cilindrinių įdėklų honavimui Staklės beveik naujos. Jos buvo nupirktos konkrečiam užsakymui, kuris po 2 metų nebuvo pratęstas.

Gamybos metai: 1981, būklė: geras (naudotas), Manufacturer: National Broach Model: GHC 12" Year of manufacture: 1981 Max. workpiece diameter: 355 mm Min./max. pitch circle diameter: 100–152 mm Max. face width: 63.5 mm Min./max. module: 1.25–6.35 mm Weight: 3.4 t Operation: Internal gear honing Knodpfx Ajhad Avef Hea

Gamybos metai: 1960, būklė: naudotas, max. pulling force: 20,000 kg max. lift: 1,250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min Kodpfx Afoui Sbe Hsna max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine features an automatic tool feeder and is designed for manual series production. The tool locking mechanism in the pull bridge, as well as in the tool feeder, operates via spring mechanism (pull head DIN 1417).

Gamybos metai: 1959, būklė: naudotas, max. Zugkraft: 16 t max. Hub: 1250 mm Knjdpfs Rwa Uex Af Hsa Schnittgeschwindigkeit: 5.6 m/min Rücklaufgeschwindigkeit: 30 m/min

Gamybos metai: 1980, būklė: naudotas, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 pcs weight: 4.8 t automatic tool feeder hydraulic clamping for drawing head and end piece holder automatic loading device for workpieces up to 100 mm diameter Knsdpfecdtplex Af Hsa magnetic strip chip conveyor

Gamybos metai: 1956, būklė: naudotas, mašinos/transporto priemonės numeris: 1413, Manufacturer: Karl Klink Knjdedbmgmepfx Af Hoa Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine No.: 1413 General information / Technical data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition Pulling force: 13,000 kg (maximum) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Clamping diameter of pull head: Ø 85 mm Passage width between cylinders: max. 390 mm Cutting speed: hydraulically and steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically and steplessly adjustable from 7 m/min to max. 25 m/min Machine dimensions (W x D x H): approx. 1150 x 1500 x 3725 mm (tool feeder extended) Power supply / Connected load: 380 Volt 50Hz / 7.5 kW Accessories / Special equipment: The traverse of the machine is equipped with 3 broaching tool holders, while the workpiece table has 1 broaching station (modifiable). The tool clamping system as well as the tool feeder are designed for a spring-actuated locking mechanism (DIN 1415). The machine is fitted with an automatic tool feeder; the available feeder mount is suitable for just one tool (center broaching station). The machine is equipped with an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production with medium batch sizes. The machine features an automatic cycle. For operation, ideally a machine pit or alternatively a pedestal is required. Pull heads, tool holders & tools are available upon request. The machine can be inspected under power at our warehouse.

Gamybos metai: 1951, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal broaching machine, in good, operational condition Broaching stroke: 1500 mm Broaching stations: 1 unit Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Thru-hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically continuously adjustable from 2 m/min to 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Kodpsdcdrpefx Af Hsna Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • The machine includes an integrated coolant-lubrication system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is clean in the area of the guides and cylinder. On request, broaching needles as well as broaching mandrels can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1980, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25 x 2500 x 500 Year of Manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic broaching machine with 3 broaching stations, in very good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping diameter of draw heads: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connection rating: 380V / 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. Previously, a sliding workpiece table was mounted on the machine, equipped with a special external broaching clamping device (workpiece sliding table can be modified). Kjdpodffzfefx Af Hona The tool clamping system is equipped with a hydraulic lock both in the draw bridge and the feeder. The machine is fitted with a coolant unit including integrated chip conveyor. Remarks: The machine is in very good condition and retains its original paint. It is designed for use in series production, ideally requiring a foundation (pit) for optimal operation. Draw heads and ejector needles are available on request. The machine can be inspected in our warehouse.

Gamybos metai: 1958, būklė: naudotas, mašinos/transporto priemonės numeris: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2,500 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 1 broaching station, fully operational. Tensile force: 6,000 kg Broaching length: 1,000 mm Draw head diameter: Ø 85 mm Passage width between cylinders: max. 280 mm Cutting speed: hydraulically variable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically variable, stepless from 7 m/min up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Knodpfxsda Ugis Af Hea Power supply / Connected load: 380 Volt, 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 1 broaching station. The tool clamping system is designed for mechanical spring locking (DIN 1415). An integrated coolant system is included. The machine features a double draw head for two flat broaching tools with workpiece support plate. Remarks: The machine is in age-appropriate good condition and ready for immediate use. It is designed for manual operation in medium-batch production. Installation ideally requires a machine pit or, alternatively, a platform. Draw heads are available on request. The machine does not have a tool loader. The machine can be inspected under power at our warehouse.

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Knodpogyd T Esfx Af Hoa Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz

Gamybos metai: 1964, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Kodpfst Dv I Asx Af Hona Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter for pull heads: 3 x Ø ___ mm Cutting speed: hydraulically infinitely variable from 1 m/min up to a maximum of 7 m/min Return speed: hydraulically infinitely variable from 7 up to a maximum of 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring mechanical locking in the pull bridge and hydraulic-mechanical locking in the feed. The machine underwent an electrical (Siemens S7 PLC) and mechanical retrofit in 2004. The unit is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation pit is recommended, or alternatively, a platform may be used. Pull heads and broach lifters are available upon request. The machine can be inspected at our warehouse.

Gamybos metai: 1960, būklė: nepatikrintas (naudotas), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Knjdohu E Egepfx Af Hoa Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: Supplied without chip tray.

Būklė: nepatikrintas (naudotas), Forst RF 16 Internal Broaching Machine -WKG 1371- Knjdpfxshu E N De Af Hja Technical Specifications: Manufacturer: Forst Model: RF 16 Maximum Pulling Force: 16 t Maximum Stroke: 1200 mm Maximum Cutting Speed: 5.6 m/min Maximum Workpiece Diameter: Ø 700 mm Maximum Tool Diameter: Ø 120 mm Workpiece Mount Bore: Ø 70 mm Note: Control valve missing

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1732, Vertical internal broaching machine with index plate by Karl Klink Model: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Knsdpfogyd Svjx Af Hja Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1964, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 2041, Vertical internal broaching machine with index plate by Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Knsdpfx Afogyd S De Hsa Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Gamybos metai: 1990, būklė: labai geros būklės (naudotas), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Knsdpfx Afslpadyo Hsa Technical specifications: Vertical internal broaching machine in technically very good condition Tensile force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely adjustable Return speed: up to 34 m/min, infinitely adjustable Maximum stroke: 1250 mm Broaching stations: 4 units Accessories: - Automatic tool changer - Automatic parts feeder (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-series production with high cutting speeds!

Gamybos metai: 1965, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Mounting in the pull bridge: Ø 105 mm cylindrical Through-hole in clamping table: Ø 125 mm Clamping surface / workpiece area: 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool feeder’s tool tray) Cutting speed: hydraulically, steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding work area) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Features: • Mechanical-hydraulic control for broach and return stroke • Integrated coolant and cutting fluid system • Manual tool feed • Broaching carriage with pull head mounting guided flat on both sides • Adjustable pulling force limiter • Pulling force indicator Accessories: • 1 universal pull head for flat shanks up to approx. 40 mm width • Indexing device (see photos) • Various special adapters and clamping devices • Machine documentation Remarks: Ksdpfx Afetuuvzs Hena The machine is suitable for producing keyways using flat broaching tools as well as profile broaching. Thanks to the machine bed and the robust broaching tool feeder, the machine is ideally suited for heavy-duty profile broaching tools. The machine is used and in good condition for its age. The machine is available for inspection at our warehouse. The machine has newly arrived in our stock and has not yet been overhauled, neither technically nor cosmetically. Pull heads for profile broaching are available on request, depending on DIN standard, dimension, and subject to stock.