Holzkraft Hbs 351 Test pirkti naudotą (222)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. Hfjdpfx Acscnw U Deuon All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Feed unit with consistent feed speed without power loss Metal gearbox with hardened gears Metal cover for feed rollers Forward and reverse operation High-performance motor Durable PU feed rollers Stand included as standard with extended outreach arm Individually swiveling and adjustable for horizontal and vertical use With counter Model: VSA 48 L Article No.: 5115500 Technical Data Maximum outreach: 1050 mm Number of feed rollers: 4 Roll diameter: 120 mm Roll width: 60 mm Roll spring travel: 25 mm Speed settings: 8 Speeds: 2/ 4/ 5.5/ 6.7/ 11/ 13/ 16.5/ 33 m/min Hfsdpfx Acecnxmzouon Motor power: 0.75 kW Connection: 400 V / 50 Hz Weight: 65 kg

Sąlyga: naujas, Gamybos metai: 2025, for machining smaller parts, especially solid wood Hfedpfx Acecnw U Rousn Simple and safe operation Combination sanding unit with sanding pad for calibrating solid wood Control panel on the front side Standard with ribbed steel roller diameter 120 mm and hard sanding pad with graphite lining on a replaceable insert Motorised height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor startup Mechanical measurement of table position Ammeter for indicating the current draw of the sanding unit Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite overlay Universal design for calibration and sanding work on solid wood Model: BBS 630 C Article number: 5343065 Technical Data Working width: 630 mm Diameter of working roller: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed motor: 0.43 kW Height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Operating pressure for belt blower: 8 bar Extraction pipe diameter: 150 mm Extraction capacity: 3,000 m³/h Dimensions (mm): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, FS 41 Classic Tersa – Surface & Thickness Planer with TERSA Quick-Change Knife System Features: - Equipped with TERSA cutterhead for fast, tool-free knife changes within seconds - TERSA knife system ensures particularly quiet operation - Helically grooved steel infeed roller for consistent and uniform material feed - Extra-long, one-piece surfacing tables allow for easy straightening of workpieces - Large, robust fence remains in position when opening surface tables - Surface tables open to the rear for ergonomic access - High machine weight ensures maximum precision and vibration-free operation - Powerful industrial-grade motor - Heavy-duty steel and cast iron construction Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Surfacing (Jointer) Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min. Hsdscnxayspfx Acuofn Cutterhead diameter/knives: 72 mm / 3 pcs. Cutterhead speed: 5200 rpm Motor: 400V/50Hz/S6 40% power cycle, 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg TERSA Cutterhead - No adjustment or screwing required - Knife changes in seconds - Self-locking mechanism - Exceptionally quiet operation Cutter Block - Heavy-duty anti-kickback devices prevent material kickback - Tersa 3-knife cutterhead delivers optimal planing results Material Feed - Helically grooved steel feed rollers for constant and uniform wood feed without marking the material - 13 teeth simultaneously engage the workpiece for powerful feed - Wear-free compared to rubber feed rollers Dust Extraction Connection - Both surfacing and thicknessing extraction ports are aligned in the same direction - Hose connection is accessible from one side only - No hose routing required around the machine

Sąlyga: naujas, Gamybos metai: 2025, Maximum equipment for professionals. Multi-function combination machine with TERSA cutterblock, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is maintained even when the scoring saw blade is installed. Scoring unit with a separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from outside. High-precision sliding table made from anodised aluminium, running on hardened and milled steel guide rails. Large outrigger (1200 x 650 mm) with support roller and extendable aluminium telescopic stop, adjustable up to 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the back into the fence. Four spindle speeds. Spindle moulder with forward and reverse rotation. Quick conversion to thickness planer thanks to parallel opening surfacing tables. Two-speed feed on the thicknessing table. Helical steel infeed roller for consistent timber feed. Three independent industrial motors. With separate saw rip fence and separate jointing fence. With lockable main switch. Equipment details: Format fence Immediate control Outrigger Outrigger with angle-adjustable telescopic crosscut stop, with degree scale. Sliding table with ball-contact system Made from anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Rails are riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty on wear of the hardened guideways. Cast iron dual trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Located close to the saw blade, supported on both sides. Height and tilt adjustment up to 45°. Scoring unit as standard with separate scoring motor 0.55 kW. Dual trunnion spindle moulder unit Large dimensioned, tilting dual trunnion spindle moulder unit made of cast iron. Spindle fence Heavy-duty professional design. The high-quality cast iron spindle fence comes as standard with fine adjustment. 3-position for fast repeat settings. Fine adjustment via rack-and-pinion, numeric display, and aluminium fence faces. Planer units Helical steel infeed rollers for constant and even timber feed. Massive anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterblock ensures optimal planing finish. Table lips provide quieter operation. Tersa planing cutterblock No more setting and screwing. Cutter change in seconds. Self-locking. Particularly quiet. Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions. A special lifting mechanism maintains the position of the table safely even without locking. Rip fence With fine adjustment and quick clamping. Stable round bar guide made of ground steel. Repositionable aluminium scale. No dimensional gap as guide rods are overlapping. Separate surfacing fence Large professional version (1800 x 150 mm). Tiltable 0–45°. With quick adjustment. Stable round bar guide made of ground steel. Simultaneous opening. Type: No. 5500557 Hfedscnxa Sopfx Acuon

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser with TERSA quick-change cutter knife system. With TERSA quick-change system for changing planer knives in seconds. The TERSA cutterhead system enables particularly quiet operation. Helically serrated steel infeed roller ensures consistent and uniform material feed. Robust surfacing tables made from ribbed, stress-free cast iron; milled and permanently flat, making them resistant and durable. Large, swiveling fence for precise jointing, adjustable 90°/45°, with quick clamping. Surfacing table opens to the rear. High-performance motor. Sturdy steel/cast iron construction. Long-hole drilling unit retrofittable. Equipment Details: TERSA cutterhead No more adjustment and screwing required Planer knife change in seconds Self-locking Particularly quiet operation Perfect planing results Surface Planer: Standard equipped with TERSA quick-change cutter knife system Large-dimensioned surfacing tables The surfacing and thicknessing tables made of cast iron guarantee maximum running smoothness and vibration-free operation. Thickness Planer: With powerful thickness feed, workpieces up to 200 mm in height can be planed. The helically serrated infeed roller guarantees consistent feed. Changing over from surface planer to thickness planer is done in seconds and with a single hand movement. Drive: Stably designed chain drive Drive wheels made of steel Solid cast iron bearing support Planing Unit: Heavy-duty kickback protection devices prevent workpiece kickback. 3-knife TERSA cutterhead ensures an optimum planing finish. Special Features: Large fence, adjustable 90°/45° for precise jointing with quick clamping Scope of delivery: Large fence, adjustable 90°/45° for precise jointing with quick clamping TERSA cutterhead Model: minimax fs 30g TERSA Item No.: 5503036 Technical Data ---Technical Data Surfacing--- Total table length: 1200 mm Infeed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. depth of cut: 3 mm ---Technical Data Thicknessing--- Thicknessing table dimensions: 450 x 300 mm Min./max. working height: 3/200 mm Feed speed: 6 m/min Cutterhead diameter/knives: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction port diameter: 2 x 120 mm Hfodpfedqy Uqox Acuon Weight: 140 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Joiner (Planing Table) Infeed table length: 1034 mm Maximum cutting depth: 5 mm Dust extraction connection Thicknesser extraction port diameter: 2 x 120 mm Thicknesser Minimum working height: 3 mm Maximum working height: 230 mm Maximum cutting depth: 5 mm Electrical Data Drive motor power: 5 kW Rated voltage: 400 V Network frequency: 50 Hz Cutterblock Type: TERSA Number of blades: 4 pcs Speed: 5,200 rpm Maximum planing width: 410 mm Feed Feed speed: 6 / 12 m/min The TERSA cutter system allows for exceptionally quiet operation. Helically grooved steel infeed roller ensures consistent and even material feed. Hfjdpfx Acshkz E Tsuon Material feed with two selectable speeds. Digital height readout for thickness table. The 2,000 mm long jointer tables make it easy to plane large workpieces. Tables are made of cast iron, stress-relieved and annealed, ensuring stability and long-term flatness. Heavy-duty, large aluminium jointer fence with round bar guide (1200 x 160 mm). Thickness table adjustment via handwheel with numeric height display. The high machine weight delivers maximum precision and extremely smooth running. Powerful industrial-grade motor. Robust steel/cast iron construction. Equipment Details Jointer Fence Stable, large jointer fence made from aluminium (1200 x 160 mm), with precise round bar guide. Extraction Hose Connection The extraction ports for both jointer and thicknesser face the same direction during operation. This allows the extraction hose to be connected from the same side for both planing operations, requiring no hose routing around the machine. Planer Unit Helically-grooved steel infeed rollers assure a constant and uniform material feed. Heavy-duty anti-kickback fingers prevent workpiece kickback. Four-knife cutterblock provides optimal planing results. Chain Drive Robust chain drive design. Drive sprockets made of steel. Massive cast iron bearing block. Two Feed Speeds Standard with two feed rates, easily selectable from the operator’s panel. Material Feed Helically-grooved steel infeed rollers provide consistent, mark-free material feed. Multiple teeth engage simultaneously for powerful feed force. Wear-free compared to rubber infeed rollers. Thickness Table Adjustment Adjustment via handwheel, with numeric digital height display, accurate to 0.1 mm. Tersa Cutterblock No setting or screwing required—blade changes in seconds, self-locking, exceptionally quiet, perfect planing results. Location: Ex-stock 54634 Bitburg - immediately available - Subject to prior sale.

Sąlyga: naujas, Gamybos metai: 2025, Enclosed and secure saw area for increased safety thanks to legally required saw protection device Anti-twist protection for the wood via stamped barbs in the rocking table Robust, torsion-resistant steel frame Transport device for easy relocation Shock-, scratch-, and weather-resistant due to high-quality powder coating Phase inverter Dimensions and Weights Working height: 700 mm Rocking table support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Hfodpohkz Hiofx Acusn Drive Drive type: Electric motor with direct drive Electrical Data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw Blade Diameter: 700 mm Cutting Capacity Round wood in rocking table: 250 mm Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights: Chip collection volume: 2 x 165 l Hsdohk Dfrjpfx Acujfn External nominal diameter extraction port (inlet): 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Filter: Filter surface area: 22 m² Noise Emission: Maximum sound pressure level: 72 dB(A) Airflow Rate: Nominal airflow rate: 2262 m³/h Dust tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision protection Field of Application: Designed for commercial use Suitable for all woodworking machines with an appropriately sized extraction port High-Quality, Well-Designed Construction: Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, enabling flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Delivered fully assembled, ready for immediate use All models mobile On RLA 210 model: Optimal chip distribution in the chip containers due to large filter surface area Filter Description: Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter standard with antistatic version, tested and approved to M-BIA category Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on control box Fan installed downstream of the filter Equipment Details: Fitted with innovative locking mechanism for secure container positioning Location: In stock, 54634 Bitburg - available at short notice -

Sąlyga: naujas, Gamybos metai: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional trade machine featuring motorised height and tilt adjustment of the spindle, four speeds, and electronic control Article number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminium sliding carriage ✔ Handle on sliding carriage ✔ Fencing system FLEX ONE: heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual depth of cut adjustment, swing-away mechanism, aluminium fence jaws with connecting rails Spindle height adjustment motorised Telescopic mitre fence with two fold-away stops Spindle tilt adjustment motorised Hfodpfehp Rc Isx Acuon Extension table ✔ Control system Ready 3: programmed movement of the spindle unit on two axes, automatic adjustment of the entire fence according to tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece safety guard ✔ Position of control elements Operator panel at eye level, swivelling Excenter clamp TECHNICAL DATA Dimensions and Weight Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Extraction port diameter 2 x 120 mm Working Table Working table length 1200 mm Sliding carriage length 1200 mm Working table width 530 mm Sliding carriage width 360 mm Table height 900 mm Sliding carriage height 142 mm Installation Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Space requirement explanation Dimensions include maximum traverse paths or usable lengths. Working area width/depth 2300 mm Machine body length 1200 mm Working area explanation Add the stated dimensions to the required space to get the recommended free installation area for the machine. Electrical Data Connection voltage 400V Drive motor power 5.0 kW Mains frequency 50 Hz Spindle Spindle tilt 0 to -45° Spindle speed display On control panel display Spindle usable length 125 mm Spindle shaft diameter 30 mm Spindle rotation speeds 3500/6000/8000/10000 rpm Maximum Cutter Diameters Max. cutter diameter 240 mm Max. profile mill diameter 240 mm Max. retractable cutter diameter 230 mm

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Combined Planer Thicknesser - Immediately available - Ideal for demanding craftsmen and cabinetmakers The especially long, one-piece surfacing tables enable easy straightening of workpieces Work tables are made of cast iron, making them robust and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support for quick and comfortable retooling Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during retooling, saving valuable working time Helically geared steel infeed roller ensures constant and uniform wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood output Material feed with four speeds Thicknessing table adjustment via handwheel with integrated planer height display DIGITAL Version: with electric thicknessing table adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures utmost precision and smooth operation. Prepped for mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total table length 2250 mm Max. cutting depth 5 mm Fence length 1200 mm Fence height 150 mm Dust Extraction Connection Extraction port diameter thicknesser 1 x 120 mm Drive Power Main motor 7 kW Installation Info Required space length 2250 mm Required space width/depth 1440 mm Required space explanation: Measurements account for maximum travel range or working lengths. Thicknesser Thickness table length 850 mm Thickness table width 520 mm Min. working height 3 mm Max. working height 240 mm Min. working length 220 mm Max. cutting depth 5 mm Hfjdpfoih Dxdex Acusn Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of cutter knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Robust cast iron and steel construction Large-dimension cast iron milling unit, tiltable up to -45° to the rear Milling speeds indicated by LEDs Quick, easy speed change via eccentric clamping Forward/reverse rotation Height and tilt indicated to an accuracy of 0.1 mm Heavy-duty professional milling fence: with rack-and-pinion fine adjustment, digital readout, aluminum fence jaws, 3-way positionable for rapid repeated settings TECHNICAL DATA Extraction connection Extraction port diameter 2 x 120 mm Worktable Worktable length 2500 mm Worktable width 655 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 5.0 kW Milling spindle Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Spindle shaft diameter 30 mm Max. milling tool diameter Max. tool diameter 240 mm Max. lowerable tool diameter 230 mm Max. tool diameter for profile milling 210 – 240 mm Max. tool diameter for tenoning 320 mm SCOPE OF DELIVERY Aluminum milling fence jaws Curved profile milling safety guard Motorized height- and angle-adjustable milling spindle Hfedpfxoiidnfe Acuon Digital readout of set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - Available immediately -

Sąlyga: naujas, Gamybos metai: 2025, Woodworking Machines / Spindle Moulder Minimax twf55 es Item No.: 5502261 Robust steel and cast iron construction Anodized aluminum sliding table Large-scale milling unit made of cast iron, tiltable up to -45° to the rear Four milling speeds from 3,500 to 10,000 rpm Right- and left-hand rotation as standard Height and tilt display accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for long-lasting precision Powerful 5.0 kW industrial motor Curved milling protection hood included Made in Italy Dimensions and Weights Length (product): approx. 1200 mm Width/Depth (product): approx. 2000 mm Weight (net): approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1200 mm Work table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Installation Information Required length: 2800 mm Required width/depth: 2910 mm Explanation required space: The dimensions take into account maximum travel or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Explanation working area: Please add the specified measurements to the required space to determine the recommended free installation area for the machine. Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Hfsdpfx Acsi Dphteuen Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speed(s): 3500/6000/8000/10000 rpm Spindle speed display: LED on the machine front Spindle shaft diameter: 30 mm Max. Milling Tool Diameter Max. tool diameter: 240 mm Max. lowerable tool diameter: 230 mm Max. profile milling diameter: 240 mm Max. tenoning cutter diameter: 320 mm EQUIPMENT Equipment Aluminum sliding table: ✔ Spindle fence: Heavy‑duty professional version with hold-down, safety guard, and aluminum fence cheeks Telescopic mitre fence: with two flip stops Extension table: ✔ Curved milling guard: ✔ Eccentric clamp: ✔ Sliding table handle: ✔ Spindle height adjustment: manual Spindle tilt adjustment: manual Control: manual height and tilt adjustment of the milling unit Control element position: on the machine body Location: In stock at 54634 Bitburg - Available immediately -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, ST 3 classic F 23 – Combined Saw and Spindle Moulding Machine With tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and grey cast iron construction Large support surface and precise cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°–45° Rip fence with fine adjustment Stable saw unit and large double-trunnion spindle moulder aggregate ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3,500 to 10,000 rpm Spindle with reversible rotation direction Standard curved milling guard Two 5.0 kW motors with high power reserves Grey Cast Iron Spindle Moulder Unit Top-mounted on both sides Top precision ball bearings Close to pivot point Four optimally graded spindle speeds, allowing for trimming of workpieces Hfjdpfxocnwydo Acuon Powerful Motors Industrial motor, 100% duty cycle suitable for continuous operation (full load) Scope of delivery: Curved milling guard Anodized aluminium format sliding table Aluminium fence jaws Folding stops Technical Data Cast iron working table dimensions: 1112 x 430 mm Cutting length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscutting width: 2660 mm Saw blade tilting: 90°–45° Cutting width: 900 mm Speed: 4000 rpm Spindle moulder: – Spindle tilt: 90°–45° Usable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 180 mm Speeds: 3,500/7,000/10,000 rpm General: – Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Location: Ex stock 54634 Bitburg – Available immediately –

Sąlyga: naujas, Gamybos metai: 2025, LAB 300 PLUS F 16 TERSA – Universal Combination Machine with Aluminium Sliding Table and Multiple Spindle Speeds For sawing, milling, surface and thickness planing, and optional slot mortising - Torsion-resistant steel and cast iron construction - Machine table made of hardened and ground cast iron - Smooth-running anodised aluminium sliding table, with a 10-year warranty on guideways - Large squaring frame with extendable aluminium telescopic fence and flip stops - Combination saw jointing fence with 45° quick adjustment - Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° - Helical-toothed steel feed roller for uniform wood feed during thickness planing - Four manually adjustable spindle speeds - Standard reversible spindle rotation (right/left) - Three independent motors for each working unit Scope of delivery: - Combination surface/parallel fence - Curved milling protection hood - Tersa cutterblock - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops - Eccentric clamping arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90°/45°: 100/79 mm Max. cross-cut width left of saw blade: 1660 mm Cutting width at parallel fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilting: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table size: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter (retractable): 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speed: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor power (400 V / 50 Hz / S6 - 40%): 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Sliding Table with Ball Bearing System - Equipped with a proven ball contact system, tested millions of times - Permanently smooth running due to hardened and ground guides - Not sensitive to dust and dirt, thanks to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on wear of carbide guideways Extraction Hose Connection Hjdpfx Acocnxa Nouefn The extraction ports on both the surface planer (1) and thickness planer (2) face the same direction. The extraction hose can therefore be connected to the machine from the same side for both modes, eliminating the need for the hose to reach around the machine. Planer Units - Helical-toothed steel infeed rollers ensure constant, even wood feed - Heavy-duty anti-kickback devices prevent workpiece kickback - 3-knife cutterblock ensures optimal surface finish

Sąlyga: naujas, Gamybos metai: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and joiners The especially long one-piece planer tables ensure easy planing of workpieces Work tables are made of cast iron, making them resistant and permanently flat Rearward, simultaneously opening planing tables with spring support for fast and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose when converting, saving valuable working time Helically grooved steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing exit ensures smooth wood extraction Material feed with four selectable speeds Thicknessing table adjustment via handwheel with integrated thickness height display DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator’s position Powerful industrial motor High machine weight guarantees top precision and smooth operation Prepared for slot mortising unit Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer (Jointer) Total table length: 2250 mm Max. planing depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust extraction connection Thicknesser extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Installation information Required space length: 2250 mm Required space width/depth: 1440 mm Hfodpfjff Hdpex Acusn Explanation required space: The dimensions take into account maximum traverses or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. planing depth: 5 mm Electrical data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Sąlyga: naujas, Gamybos metai: 2025, Vertical design for splitting short and meter-length logs Low base plate for easy, ergonomic loading of large trunks Mechanical log-lifting device positions heavy logs in a back-friendly manner Equipped with log retaining bracket Quick, tool-free adjustment of splitting height Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety operation Easy transport with manual drawbar via standard chassis with solid rubber wheels and additional support wheel Impact- and scratch-resistant thanks to high-quality powder coating Space-saving storage due to easy lowering cylinder Dimensions and Weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Rated power: 3.5 kW Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Machine Data Maximum splitting force: 14 t Minimum splitting length: 560 mm Hsdpehkz Hmjfx Acuefn Maximum splitting length: 1040 mm Minimum log diameter: 100 mm Maximum log diameter: 300 mm Hydraulic System Hydraulic oil tank capacity: 7.5 l Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips produced by milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows chip extraction from above or below Durable metal impeller Equipped as standard with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bags Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 120 l External diameter extraction inlet 203 mm External diameter extraction outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data No-load speed 2950 rpm Power consumption 2.2 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1.92 m² Hjdpfehk S Sdjx Acujfn Noise emission Sound pressure level max. 87.5 dB(A) Volume flow Nominal air flow 2800 m³/h Max. negative pressure 1900 Pa Scope of delivery: Two filter bags, two chip collection bags Location: In stock at 54634 Bitburg - Available immediately -

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) 180° rotatable extraction unit allows extraction from below or above Robust metal impeller Standard equipped with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 110 l Outer nominal diameter, extraction inlet: 203 mm Outer nominal diameter, extraction outlet: 1 x 100 mm, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Electrical Data No-load speed: 2950 min⁻¹ Power input: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Hfsdpfx Acohk S Shsuen Airflow Rated airflow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex-stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Chip Extraction Unit ASA 4303 Mobile, with 180° rotatable extraction unit Designed for milling, planing, and saw chips (not suitable for dust) The 180° rotatable extraction unit allows chip removal from below or above Stable metal impeller Supplied as standard with a high-quality chassis for increased stability and easy maneuvering Quick-release closures for filter and chip bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l External diameter suction inlet: 260 mm External diameter suction outlet: 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/Depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Power consumption: 3.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Hfsdohk S Slspfx Acuen Filter Filter area: 2 x 2.4 m² Noise Emission Sound pressure level max.: 89.9 dB(A) Volume Flow Rated air flow: 4300 m³/h Maximum negative pressure: 2000 Pa Scope of delivery: Two filter bags, two chip bags Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2022, Drilling depth: 170 mm Drilling width: 250 mm Spindle speed: 2,800 rpm Hedpfx Acoih H A Reuefn HOLZKRAFT Mortising Machine LLB 30 Entry-level mortising machine with single-lever operation, eccentric clamp, dowel boring device, and handwheel-operated drill head height adjustment with digital display for fast and precise work. Worktable (L x W): 580 x 300 mm Drilling width: 250 mm Drilling depth (at 90°): 170 mm Drill head height adjustment: 200 mm Worktable swivel range: non-rotatable Tool holder: WESCOTT drill chuck Clamping range: Ø 0 - 20 mm Spindle speed: 2,800 rpm Motor power: 2.2 kW | 400 V – 50 Hz Extraction port: Ø 70 mm Dimensions (L x W x H): 1500 x 920 x 1400 mm Net weight: approx. 160 kg Includes dowel boring device, eccentric clamp, digital height adjustment display, Wescott drill chuck 0-20 mm HOLZKRAFT Mortising Machine LLB 30 – Entry-level machine for professional mortising – Made in EU Easy operation with single-lever control for fast and precise work Drill head with hardened prism guides and ball contact bearing system Drill head height adjustment with handwheel and digital readout Manual eccentric clamp Robust steel and cast-iron construction Powerful three-phase motor Dowel device with indexing positions: 16 | 22 | 27 | 32 mm Clamping stops for quick and easy adjustment of the drill head travel Scope of delivery HOLZKRAFT Mortising Machine LLB 30 Drill head height adjustment with handwheel and digital display Dowel boring device with index Eccentric clamp Wescott drill chuck 0 - 20 mm Operating manual with exploded views, spare parts lists, and CE certificate of conformity Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Raw Air Extraction Unit ASA 203 With integrated transport frame Dimensions and Weights Chip collection volume: 175 l External diameter of extraction nozzle (inlet): 200 mm Length approx.: 1,061 mm Width/depth approx.: 577 mm Height approx.: 2,300 mm Weight approx.: 60 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2.2 m² Noise Emission Maximum sound pressure level: 84 dB(A) Airflow Rated air volume flow: 2,500 m³/h Suitable for chips from milling, planing and sawing (not for dust) Significantly reduced dust content thanks to BIA-certified filter material with high separation efficiency Housing components and impellers made of high-strength special plastic Quick-release fasteners for filter and chip bags for hassle-free maintenance Rugged, high-quality construction Easy to manoeuvre thanks to swivel castors Low power consumption Extraction units comply with dust class L Scope of delivery: Unit body with mounted fan assembly Hodpfx Acjhk S Szeuefn Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Sąlyga: naujas, Gamybos metai: 2025, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Hfjdpjhp Rdlofx Acujn Location: Ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Planer-thicknesser Minimax FS 41es TERSA Maximum equipment for professionals. Article number: 5503431 Brand: Holzkraft / SCM Helical-toothed steel feed roller for consistent and even material feed, allowing planing from as little as 0.2 mm chip removal (at minimum workpiece thickness of 3 mm) – ideal for economical planing of precious hardwoods. Models with TERSA cutterblock enable blade changes within seconds and operate with particularly low noise. Material feed with two speeds. Extra-long planer tables for easy and precise alignment of workpieces. Tables made from cast iron, annealed and stress-free for durability and long-term flatness. Simultaneously opening, rear-hinged jointer tables for short setup times. Thickness table adjustment via handwheel with digital height display. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product): Approx. 2200 mm Width/depth (product): Approx. 1160 mm Height (working): 905 mm Net weight: Approx. 450 kg Jointer Total table length: 2200 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Max. jointer cutting depth: 5 mm Hfedpfjlht Htox Acusn Dust extraction Thicknessing extraction port diameter: 1 x 120 mm Thicknesser Table length: 775 mm Working height max.: 240 mm Table width: 410 mm Max. thicknessing cutting depth: 5 mm Min. working height: 3 mm Electrical Data Main drive motor power: 5 kW Mains frequency: 50 Hz Operating voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5000 rpm Cutterblock diameter: 95 mm Maximum planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round rod guide & auxiliary fence Two feed speeds TERSA cutterblock Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft Vertical Panel Saw VPS 2241 VR ED Fully equipped, precision panel saw Item number: 5600242 DESCRIPTION Smooth and ergonomic operation Scoring unit for chip-free cutting quality Slatted frame automatically retracts Continuous central workpiece support Two measuring stops Panels rest on movable rollers and can be shifted without lifting Modular welded machine frame, torsion-free and self-supporting Saw unit with chain guide and two control levers Large opening for blade changes TECHNICAL DATA General Information Cutting height: 2200 mm Hsdpfow Aqaaox Acusfn Cutting length: 4100 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Saw blade speed: 4800 min¯¹ Scoring blade diameter: 80 mm Scoring blade speed: 8500 min¯¹ Stops: 2 pcs Sound pressure level: 89.2 dB(A) Dimensions and Weight Max. height (product): 3100 mm Length (product) approx.: 5300 mm Width/Depth (product) approx.: 1800 mm Height (product) approx.: 3000 mm Net weight approx.: 600 kg Extraction Connection Extraction port diameter: 100 mm Min. extraction air requirement: 1000 m³/h Min. air velocity: 20 m/s Electrical Data Drive motor power: 3 kW Connection voltage: 400 V Power frequency: 50 Hz SCOPE OF DELIVERY Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal Scoring blade Ø 80 x 2.8-3.6 mm Z20 EQUIPMENT Lower material support: metal rollers Retractable slatted frame: automatic Vertical measuring display: digital Horizontal measuring display: digital Panel positioning: Without lifting, on movable rollers Location: ex works - Available at short notice - Subject to prior sale