Hebrock Euro 1000 pirkti naudotą (52)

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3074, Y ašies padavimo greitis: 10 m/min, bendras ilgis: 4 984 mm, ruošinio aukštis (maks.): 60 mm, bendras plotis: 1 425 mm, briaunos storis (maks.): 3 mm, bendras aukštis: 1 618 mm, bendras svoris: 1 400 kg, įvesties srovės tipas: trifazis, aukščio reguliavimo tipas: mechaninis, įėjimo įtampa: 400 V, ekstrakcijos antgalio skersmuo: 140 mm, darbinio aukščio: 888 mm, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, ištraukimo jungties skersmuo: 140 mm, paskutinio kapitalinio remonto metai: 2025, Due to the procurement of a new machine, we are selling our reliable edge banding machine, purchased new in 2016. The machine was operated in an 8-person joinery workshop. A complete overhaul was performed in January 2025, including new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was re-sharpened. The coupling of the glue roller shaft was replaced. The glue tank underwent thorough refurbishment and cleaning. The machine is suitable for EVA granulate (e.g., Henkel Dorus KS351) and PUR gluing as well. The degree of pre-milling, edge band thickness, and the position of the lower and upper milling tools can all be conveniently adjusted by handwheels located outside the machine housing. Dkedpfx Abjxlr S Hj Sjg The control system allows you to save custom edge banding programs. For 0.4 and 2.0 mm edge banding, the machine automatically switches pneumatically from the control panel. Main specifications: - Power rating: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen - Programmable/saved edge banding operations - Feed speed: 10 m/min - Edge material thickness in coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Machining units: - Diamond pre-milling unit (12,000 rpm) - Separator fluid tank/sprayer - Gluing unit - End trimming saw - R2 milling unit - R2 radius scraper - Corner rounding unit - Cleaning fluid tank/sprayer - Flat scraper - Polishing wheel The price of the machine does not include VAT.

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures comprehensive edge processing at all stages, as it comes equipped with all the components required for your needs: pre-milling unit, end trimming saw, milling unit, radius scraping blade, corner rounding unit, surface scraper, and cleaning station. For even greater flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Dsdpfx Abelht Hwe Sokg Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and glue application tailored to the workpiece for edge materials up to 3 mm; pre-milling unit (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation including glue drain feature, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version), corner rounding cutter, radius scraper, surface scraper (including pneumatic lift), cleaning station, robust chain feed, ball-bearing mounted double pressure roller, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for separating agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spraying unit F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, bevel, and flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Sąlyga: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Naudota mašina GM020.0068 AKV 3003 DK - F Pagaminimo metai: 2007 Vykdymas: 3 mm 1-oji frezavimo stotis: Kombinuota Paviršiaus grandiklis su išėmimu Važiuoklė Dkjdpfx Abjw Nih Is Seg Pneumatinis frezavimo reguliavimas Ribinio jungiklio svirtis, 7,5° nuolydis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, veikimo valandos: 650 h, PLC control system (incl. 15" touchscreen), application of hot-melt adhesive to the workpiece for edge material up to 3 mm: jointing cutter (incl. DIA tool) up to 3 mm cutting depth, maintenance-free, coated glue pot with quick-change pot preparation incl. adhesive discharge device, HF double-motor crosscut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic adjustment, second HF milling station (approx. 12,000 rpm, incl. pneumatic lifting device), corner rounding unit1), radius scraper blade, surface scraper blade (incl. pneumatic lifting device), buffing unit, grooving saw (incl. pneumatic lifting device), robust chain feed, double roller pressure unit with ball bearings, unit viewing windows from machine rear and operator side, signal lamp for workpiece feed, extendable workpiece support, feed speed up to approx. 15 m/min, edge banding up to 60 mm workpiece thickness. Dksdpfexn Nvbex Ab Ssg Additionally, the machine is equipped with: - Quick-change system for corner rounding unit - Multi-radius scraper blade (R1/R2) - Heated infeed fence - Mobility kit - Separation agent spray system (plate spraying) - Cleaning agent spray system (plate spraying) - Edge protection spraying - Nesting - Pneumatic 3-point adjustment - Multitool for HF milling station - Airtronic (up to 40 mm workpiece thickness) - Axis package (motorised adjustment for panel thickness, edge thickness, and jointing depth) - Glue pot extraction hood In stock: Poland

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2459, Mašina labai geros būklės - Labai aiškus valdymo pultas - Minimali ruošinio plotis apie 80 mm - Minimali ruošinio ilgis apie 200 mm - Padvimas apie 10 m/min - Transporto grandinė su tvirtai prisuktais specialiais grandinių segmentais - Dvigubas viršutinis prispaudimo volas - Mašinos ilgis 4300 mm - Mašinos plotis 1400 mm - Svoris apie 1250 kg - Ruošinio padėkliukas priekyje ištraukiamas - Automatinis centrinis tepimas pjūklui ir kampiniam frezavimo agregatui - Teflonu dengtas lydomo klijų bakelis (labai mažai reikalaujantis priežiūros) - Paruošimo darbui laikas apie 5-6 min. Dkedpjx Ahmuefx Ab Ssg - Jungiamasis agregatas - Pneumatinis ritininis pjovimas - Tiesioginis klijų padavimas ant ruošinio - Priekinio ir galinio krašto pjovimo agregatas - Lygus/ kampinis/ radiusinis frezavimo agregatas - Kampų apvalinimas - Plokštuminio braižymo peilis su dvigubu jautimu

Sąlyga: geras (naudotas), Gamybos metai: 2005, Markė: Hebrock Modelis: HFF 08 Mašinos Nr.: 08/379 Pagaminimo metai: 2005 Kraštų frezavimo staklės, skirtos vienu metu viršutiniam ir apatiniam spindulio/nulio švariam frezavimui nuo laužtų kraštų ant ruošinių su tiesiomis briaunomis bei ant apvalintų ruošinių su vidiniais ir išoriniais spinduliais. Dkedeq H Spvopfx Ab Seg Techniniai duomenys: Maksimali kraštinės storis: apie 3 mm Maksimalus ruošinio aukštis: 50 mm Minimalus vidinis spindulys: 40 mm Frezavimo variklis: 12000 aps./min. Stalo aukštis: 865 mm Maks. slėgis: 6 bar Drožlių storis: 120 mm Frezavimo variklio galingumas: 0,37 kW Pagrindinis variklis: 1,5 kW, 50 Hz, 400 V, 3 fazės Sandėlio Nr.: 2001922

Sąlyga: geras (naudotas), Gamybos metai: 2003, I am selling a HEBROCK HFF08 edge radius milling machine for shaped workpieces. Year of manufacture: 2003. Suitable for curved elements. In good condition, inspections are possible! Optionally, the edge banding machine AKV 088D is also available for purchase. Dksdpfswun H Uox Ab Ssg

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 Dodpfslht Hzjx Ab Sekg The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Sąlyga: naudotas, Gamybos metai: 2005, mašinos/transporto priemonės numeris: Werksüberarbeitungsnummer: WÜA920DK-F12960, Naudota mašina GM020.0029 Pagaminimo metai: 2005 AKV 3005 DK-F 8 mm versija 1-oji frezavimo stotis: kombinuota Valymo stotis Dsdpfxsw In R Ee Ab Sskg Kampų apvalinimo freza Sujungimo freza Paviršiaus grandiklis su pakėlimu Profilio grandiklis Važiuoklė Pneumatinis frezavimo reguliavimas SPS valdymas Parengtis keičiamoms vonelėms

Sąlyga: naujas, Gamybos metai: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Dsdeg Tu Rkepfx Ab Sskg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Sąlyga: naujas, Gamybos metai: 2025, HEBROCK briaunų klijavimo staklės F2 next su PLC valdymu (įskaitant jutiklinį ekraną) ir lydymosi klijų padavimu ant ruošinio, skirtiems briaunų medžiagai iki 3 mm: sujungimo freza (įskaitant DIA įrankį) iki 2 mm frezavimo gylio, be priežiūros klijų vonelė su keitimo rinkiniu ir klijų išbėgimo įranga, HF atkirtimo pjovimo stotis (apie 12 000 aps./min.), HF frezavimo stotis (apie 12 000 aps./min.) su atskiru pneumatiniu frezavimo reguliavimu ir keičiama peilių freza (kombinuota versija), tvirtas grandininis pavara, rutuliniu guoliu dvigubas viršutinis presas, matymo langas iš mašinos galinės pusės, ištraukiama ruošinio atrama, tiekimo greitis apie 10 m/min. Įskaičiuota: F2/500/10 sujungimo galvutė Whispercut Dkedjwmdbrepfx Ab Seg F2/500/20 kombinuota frezavimo galvutė F2/500/2 freza radiusui R=2mm F2/12 paviršiaus grandymo peilis (įskaitant pneumatinį pakėlimą)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Prekės ženklas: Hebrock Modelis: AKV 83 F Pagaminimo metai: 2004 Mašinos Nr.: 10759 Techniniai duomenys: Apdirbamo ruošinio storis: nuo 10 iki 50 mm Padavimo greitis: 3 – 4 m/min Elektros jungtis: 220/380 V, 50 Hz Dksdpou Racxefx Ab Sog Galia: 3 kW Matmenys: 1750 x 800 x 1250 mm (bendri matmenys) Svoris: apie 95 kg Įkaitinimas: 3 kW, su bepakopiu elektroniniu temperatūros reguliavimu, 0–650°C Variklis: 3,5 kW Sandėlio Nr.: 2002311BXA

Sąlyga: geras (naudotas), Gamybos metai: 2002, I am selling a HEBROCK AKV 088D edge banding machine for shaped workpieces (contour edgebander). Year of manufacture: 2002. Suitable for curved components. Good condition, can be inspected! Optionally, the HFF08 radius milling unit is also available for purchase. Dedjvx D Auopfx Ab Sjkg

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 – 10 m/min feed speed Edge Banding Machine F2 next With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. Dedpfx Aoi Am U Dsb Sjkg F2/10 mobile base F2/30 pneumatic 3-point adjustment (radius, bevel, and flush milling)

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), A Hebrock right-hand edge banding machine is available. Workpiece thickness range: 10mm–50mm, minimum workpiece width: 70mm, minimum workpiece length: 250mm, edge thickness (coil material): 0.5mm–5mm, maximum edge height: 55mm, feed speed: 10m/min. Machine dimensions (L/W/H): approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. An on-site inspection is possible. Dkodpfew A R S Njx Ab Sog

Sąlyga: naujas, Gamybos metai: 2025, Your entry into edge banding couldn’t be better, as the 3.3 m long F 2 is not only affordable and space-saving. It also comes equipped with all the features you need to achieve perfect edges from the very start: diamond-tipped jointing cutters ensure that your workpieces are optimally prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination cutter. Max. edge thickness: 3 mm Dkedpfxsglfw Ne Ab Ssg Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 5.9 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: approx. 3350 x 1300 x 1400 mm (LxWxH) Worktable height: approx. 900 mm Weight: approx. 620 kg Extraction port: Ø 1 x 140 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Edge banding machine with jointing cutter (incl. DIA tool), featuring PLC control (incl. touchscreen). Dodel H E H Hjpfx Ab Sjkg Equipped with hot-melt glue application to the workpiece for edge material up to 3 mm: maintenance-free, coated glue pot with quick-change pot preparation. HF cross-cutting station (approx. 16,000 rpm) for front and rear edge overhang. HF milling unit (approx. 16,000 rpm) with replaceable insert cutter (combined version). Fine milling adjustment from the operator side (Hebrock system). Corner rounding unit (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lift-off, robust chain feed, double roller top pressure, aggregate viewing windows on both the rear and operator sides, extendable workpiece support, feed rate approx. 10 m/min, workpiece thickness up to 60 mm. Incl. 1x interchangeable glue pot, incl. undercarriage.

Sąlyga: geras (naudotas), Gamybos metai: 2005, Marke: Hebrock Modell: AKV 88 D Maschinennummer: 569-P3 Baujahr: 2005 Djdpsq Ihxpsfx Ab Sskg Technische Daten: Max. Kantenstärke: ca. 3 mm Max. Arbeitshöhe: 50 mm Minimaler Innenradius: ca. 8 mm Vorschubgeschwindigkeit: 0–7 m/min Aufheizzeit: ca. 6,5 min Motor: 9,3 kW, 50 Hz, 400 V Maschinenabmessungen (LxBxH): 1360 x 690 x 1220 mm Gewicht: ca. 150 kg Lager-Nr.: 2001921BXA

Sąlyga: naujas, Edge thickness: up to 3 mm Total length: 4122 mm Feed speed: 10 m/min with PLC control (including touchscreen) and hot melt glue monitoring at the workpiece for edge material up to 3 mm Jointing cutter (including DIA tooling) up to 2 mm milling depth1), maintenance-free glue pot with quick-change feature chip/scrap removal unit, HF (high-frequency) cut-off saw station (approx. 12,000 rpm), HF (high-frequency) milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination design), corner rounding milling unit, surface scraper (including pneumatic lift), spare station (for cleaning unit or radius scraper), robust chain drive, double roller top pressure with ball bearings, inspection window at rear of machine, extendable workpiece support, approx. 10 m/min feed. Item No. F4/00/11 - Jointing Head Whispercut F4/500/10 Dksdpsvwd Uuofx Ab Seg - Combination Milling Head F4/500/20 - Radius Milling Head R=2mm F4/500/2 - Radius Corner Milling Head R=2mm F4/08/2 - Quick-change Corner Milling Unit F4/08/4 - Radius Scraper (incl. pneumatic lift) F4/09 - Radius Scraper R=2mm F4/09/2 - Chassis F4/10 - Pneumatic 3-point adjustment (for radius, chamfer, flush milling) F4/30

Sąlyga: naujas, Gamybos metai: 2025, Hebrock F 4 For complete processing of your panels For those who don't do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges in just 4 m of machine length. The F 4 is not just space-saving – it is also extremely attractive in terms of price-performance ratio. Djdpfxehqadce Ab Sekg Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm PLC control via 10" touchscreen Top-mounted quick heating glue pot (maintenance-free) Support disc for edge material Automatic central lubrication (cut-off saw, corner milling unit) Optical indicator for workpiece sequence Outrigger (extendable to the front) Quick-change glue pot preparation including glue change device, suitable for PUR processing Surface scraper with dual sensor system Pneumatic trim shear (scissor-type design, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed, special chain plates Joiner Milling unit Cut-off saw Corner milling unit Accessories: F4/09 radius scraper (incl. pneumatic lift-out) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: From stock 54634 Bitburg – available at short notice –

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 800 kg, darbinio aukščio: 870 mm, galia: 11 kW (14,96 AG), ruošinio plotis (maks.): 70 mm, Technical data: - Max. edge thickness: 5 mm / 8 mm - Max. workpiece height: approx. 40 mm / 50 mm - Min. workpiece length: approx. 250 mm / 300 mm - Min. workpiece width: approx. 70 mm - Feed speed: approx. 11 m/min - Ready for operation: approx. 4.5 min - Power consumption: approx. 11 kW - Electrical connection: 230/400V / 50/60 Hz - Working table height: 870 mm - Dimensions (LxWxH): 4100 x 1400 x 1300 mm Dkedpoug Uqaofx Ab Seg Condition and further details as shown in the pictures.

Sąlyga: naujas, Gamybos metai: 2025, Edge banding machine F5 with PLC control (incl. 15" touchscreen), thermoplastic glue application to the workpiece for edge material up to 3 mm: joint milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF milling station with pneumatic cutter adjustment, including corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift device), cleaning station Dodpfsh Hl Ayex Ab Sjkg Whispercut jointing head Combination cutter Radius cutter R=2mm Radius corner cutter R=2mm Quick-change system for corner cutter Radius interchangeable motor R=1mm Multi-radius scraper R1/R2 Chassis Spray system for release agent (PUR) Spray system for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDES 2nd interchangeable glue pot max. edge thickness 3mm workpiece thickness 8-50mm min. workpiece length approx. 160mm feed speed 10m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300x1300x1400mm (LxWxH) Weight approx. 900kg Extraction connection 1 x 140mm

Sąlyga: naudotas, Gamybos metai: 1994, for pre-coated edges including a large quantity of edge material with double-sided extension arms end cap station 3-roller feed used, good condition Manufacturer: Hebrock Model: AKV-83 Year of manufacture: 1994 Edge band thickness: 1.0 mm Maximum workpiece height: 50 mm Minimum workpiece width: 50 mm Minimum workpiece length: 170 mm Required space: approx. 1700 mm x 690 mm x 500 mm Location: 97447 Gerolzhofen, free loaded on truck, unpacked Dkedevwfzvjpfx Ab Sjg Delivery in as-inspected condition, without guarantee or warranty

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately Available - This Hebrock evergreen offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a profile milling unit and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Dedpfxsi Am Uke Ab Sokg Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: • Hebrock K 36 – 15 m/min • K36 Edge Banding Machine • With PLC control (incl. 15" touchscreen), hot-melt adhesive provision directly onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm milling depth, maintenance-free coated glue pot with quick-change preparation incl. glue discharge device, high-frequency double-motor end trim saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic adjustment and quick-change insert milling cutter (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-out device), buffing station, robust chain drive, double-roller upper pressure with ball bearings, aggregate viewing windows on both machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge banding on workpieces up to 60 mm thick • 36/08/1 Quick-change corner rounding unit • 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 • 36/09/1 Multi-radius scraper • 36/24/1 Separator spraying device • 36/24/2 Cleaning agent spraying device • 36/25 Edge protective spray • 36/27 Nesting (1x milling station + 1x radius scraper) • 36/30 Pneumatic 3-point adjustment • 36/30/1 Multitool for HF milling station (R2/R1/chamfer) • 36/45 Axis package for motorized adjustment of panel/edge thickness and jointing depth settings Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 ensures comprehensive edge processing in every step, as it comes equipped with all the components necessary to meet your requirements: jointer, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even greater flexibility towards achieving the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and hot-melt adhesive application onto the workpiece for edging materials up to 3 mm; jointer (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change facility including glue discharge device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window from the machine’s rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: ex stock 54634 Bitburg Dkodpfx Abji Anadj Sjg Available calendar weeks: 4/2024