Gbh 10 pirkti naudotą (73 235)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Best-seller among bakery equipment – refrigeration and proofing chamber with CTS stackable tray storage system. The system is an innovative Ice Cool solution, based on regulated, uniform air circulation throughout the chamber via centrally placed tray stacks, eliminating the need for additional suction stations. CTS operates within a temperature range of -10°C to +15°C, providing optimal conditions for direct dough handling without the use of blast chillers or suction stations. The CTS chamber maintains a climate that requires no additional humidification, ensuring products do not dry out, even in ambient conditions. The result: healthier products, crunchy after baking, with a beautiful sheen and extended freshness. Chamber Specifications Installation type: CoolProofer Temperature range: -10°C to +15°C Model: CTS 300.320.252/ELRR-2LC47 Insulation value: 0.19 W/m2K Insulation: 100 mm PU sandwich panels Exterior dimensions: 320 cm (W) x 340 cm (D) x 272 cm (H) Prodpfx Asxb Uylofwsd Interior dimensions: 300 cm (W) x 320 cm (D) x 252 cm (H) Interior walls & ceiling: Stainless steel lining Lowered insulated ceiling (white) featuring one stainless steel air duct wall Exterior walls: Linen-structure stainless steel, ceiling of galvanized, food-safe painted steel sheet Floor: 100 mm PU insulation with full-area, bathtub-shaped stainless steel plate fixed to a load-distribution board Door: 1 x 90 x 200 cm swing door with advanced hygienic magnetic locking system, stainless steel inside and out Lighting: Energy-efficient LED with integrated automatic activation Technology Compressor: Energy-saving Bitzer 5 HP compressor, high COP efficiency Noise reduction: NorWep enclosure for compressor noise reduction, suitable for outdoor installation. Condenser: Large heat exchanger, designed for high external temperatures and low energy consumption Evaporator: 2xLC47 type, aluminum housing (white, epoxy-coated for acid resistance), equipped with electronic expansion valves Refrigerant: (Low-GWP 146) R-455 Refrigeration lines: 15 m to the compressor, 5 m to the condenser Control: Large, state-of-the-art 12" Touch Screen computer controller, integrated HACCP data logger with graphic chart, network connectivity, and fault notifications via email. Connected load: 8.8 kW, 3x400V+N+PE, 50 Hz. This is the connected power – actual energy consumption is significantly lower.

Sąlyga: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, skyriaus ilgis (min.): 4 430 mm, M&R Sportsman, hergestellt in den USA. Dies ist eine sehr zuverlässige und präzise Druckmaschine in gutem, funktionsfähigem Zustand. Sie arbeitet zu 100% akkurat und hat ihren Wert eindeutig unter Beweis gestellt. Psdpfeuyhkiox Afwjrd Weitere Informationen, Bilder oder Videos sind auf Anfrage erhältlich. Die Maschine wird mit einem zusätzlichen Satz Druckplatten geliefert.

Sąlyga: beveik kaip naujas (naudotas), Treif broodsnijmachine 10/12/14 mm Psdpfoumphbjx Afword

Sąlyga: naudotas, Gamybos metai: 1991, window machine, angle centre, profiling and tenoning of window sashes Prsdpfxsdm Umls Afwed

Sąlyga: naudotas, Funkcionalumas: nepatikrintas, Bottled Water Production Line for PET Bottles in formats: 0.5 L, 1.5 L, and 2.0 L. Line capacity: approx. 16,000 bph The line includes the following machines: 1) KHS triblock filling monoblock, filler 45-80-10, year 1998 (approx. 20,000 bph), control system: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) Pedpfx Afjwv Trlsword 2) KRONES Contiroll 745 labeler – year 2000 (16,000 bph), control system: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) LANFRANCHI air conveyors with control cabinet (for PET bottle transport from SIDEL to KHS) 6) KHS Innoline modular slat conveyor set – several dozen meters, including curves and dividers Used machines, regularly serviced, require a technical inspection before recommissioning. Currently dismantled, stored in containers, and prepared for transport. The line is organized and ready for reassembly – every element is marked with a unique identification number.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 1 000 kg, įėjimo dažnis: 50 Hz, nominali (akivaizdi) galia: 250 kVA, išėjimo srovės tipas: trifazis, Įranga: Tipinė plokštelė prieinama, 6 months warranty Predpfxjwnfupe Afwed

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1969, Manufacturer: Steinel Model: 6 Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK with additional guide; mounting: collet Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed of drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanically indexed to 8 positions, Ø 400 mm Predpfx Asw H I R Rjfwod Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (w x d x h): approx. Ø 1,800 mm x h = 2,200 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • The machine is designed for use in large-scale series production • Features a robust cast iron machine table with chip removal to the rear and a separate large coolant tank (drain at the rear) • Safety light curtain by Sick • Extensive range of accessories, spare parts, spindle units, and rotary indexing table included • Equipped with a 6-station rotary indexing table • Heavy-duty cast iron machine table, ideal for reconstructing a special-purpose machine

Sąlyga: naujas, Gamybos metai: 2024, Model variants: Hammel, Arjes, Lindner Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 Prsdpfx Afsr Nf Rljwod VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 AT-TEC Recycling Solutions GmbH is a metalworking company specializing in the manufacture of shredding tools for shredder machines, with an integrated welding shop. Our experienced team takes pride in providing high-quality, tailor-made solutions. We focus on quality, innovation, and customer satisfaction to ensure that our products fully meet our customers’ requirements. Our customers come from a wide range of sectors, including waste management, recycling companies, and machinery manufacturers. We maintain long-term partnerships and are pleased to supply our products and services to companies seeking reliable and high-performance shredding solutions.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Alup SCK 15-10 Screw Compressor 11 kW German brand product Very quiet – only 68 dB(A) thanks to optimal sound insulation Prodsv Hznwspfx Afwed Economical operation through intelligent electronic control Simple and safe handling via a clearly arranged control panel High operational safety with star-delta starting and 400 V three-phase motor High reliability due to top-quality components High-pressure hose for connection included Manufacturer: Alup Model: SCK 15-10 Motor power: 11 kW Air flow rate: 1.50 m³/min Maximum pressure: 10 bar Sound-insulated Control type: Aircontrol 1 Voltage: 400 V / 50 Hz Dimensions: 95 x 61 x 90 cm Weight: 220 kg Year of manufacture: 2002 More items – new and used – can be found in our shop! International shipping costs on request!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Modular Plant Growth Chambers Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton lighting module Temperature range: -10°C to +45°C for temperature testing Test chamber volume: approx. 1300 liters Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or exchanged as needed, allowing for adaptation to various applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temporal temperature deviation: ±0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ±3 to 5% r.h. Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% r.h.: approx. 0.8 kW Key parameters for climate testing with irradiation: Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ±0.5 K Pedpfx Afev Ivn Uewsrd Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ±3 to 5% r.h. Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door with observation window Computer interface Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, excellent condition Tube passage ∅ 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module

Sąlyga: naudotas, Nordson ProBlue Heißleimpumpe Predpfxowq Suue Afwjd Modell – ProBlue 10 Anschlussmöglichkeit für bis zu 6 Schläuche Tankkapazität: 10 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 1 410 kg, įėjimo dažnis: 50 Hz, nominali (akivaizdi) galia: 500 kVA, išėjimo srovės tipas: trifazis, Įranga: Tipinė plokštelė prieinama, 6 mėnesių garantija Pjdpfx Afewnfx Ujwsrd

Sąlyga: naudotas, Gamybos metai: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces, featuring manual collet clamping. Drilling Units: 7 units Station 1 – Loading and Unloading Station 2 – Horizontal drilling unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 36 mm Station 3 – Vertical drilling unit, Type: BE VK, Holder for collets Station 4 – Horizontal drilling unit, Type: BE VK, Holder: sleeve Ø 36 mm Station 5 – Vertical spindle unit, Type: BE VK, Holder: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, Type: BE VK with additional guide, Holder: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 36 mm Station 8 – Vertical spindle unit, Type: BE VK, Power: 2.2/3 kW, Holder: sleeve Ø 28 mm Drilling units feed: mechanical feed via quill Indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manually actuated collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Prjdpfx Afew E Hpvjwsd Power supply / Connected load: 380 V, 50 Hz Accessories / Special Features: • Designed for large-scale series production • Equipped with a robust cast machine table, chip discharge to the rear, and a separate large coolant tank • Extensive range of clamping and auxiliary tools • Mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very stable machine bed; ideally suited for the rebuild of a special-purpose machine as well

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, Modular Plant Growth Chambers Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton Lighting Module Temperature range: -10°C to +45°C for temperature testing Test chamber volume: approx. 1300 litres Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or exchanged as needed, allowing adaptation for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Prodpjv Ivn Ijfx Afwod Temperature deviation over time: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ± 3 to 5% rH Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% rH: approx. 0.8 kW Specifications for climate tests with irradiation: Temperature range: +10°C to +45°C with lights on Temperature deviation over time: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Humidity deviation over time: ± 3 to 5% rH Humidification and dehumidification system, test chamber made of stainless steel Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions including lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Tube port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Modular Plant Growth Cabinets Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton lighting module Temperature range -10°C to +45°C for temperature testing Test chamber volume approx. 1300 l Simpac control system Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on a modular design. Individual modules can be added or replaced as required, making them adaptable for different applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Predpfev Ivnzex Afwod Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH: approx. 0.8 kW Technical Data for Climatic Tests with Illumination Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Humidification and dehumidification system, test chamber stainless steel Internal dimensions: Height 1400 mm x Depth 750 mm x Width 1270 mm External dimensions: Height 1985 mm x Depth 980 mm x Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Computer interface Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Tube port ∅ 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 25 m/min, briaunos storis (maks.): 3 mm, sukimosi greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 Automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimmer Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Buffing Brush Number of motors: 2 Prjdoxw T H Nepfx Afwod Motor power: 0.25 kW Edge Processing Unit 8 Unit: Buffing Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray application unit Software for programming the machine: PowerControl PC22 CE marking

Sąlyga: naudotas, Gamybos metai: 1998, 1998 | Mercedes-Benz Unimog 418/10 | Commercial Vehicle – Tipper | 79,559 km Prodpfxoxzvn Rj Afwjd 📍Location: Germany, Falkenstein/Vogtland 🚛 Delivery available to your location – Use our shipping calculator for a transport cost estimate! 💰 Buy Now for EUR 24,800 or submit your offer. Payment upon delivery is available for a small fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 37 inspection points: 23 approved ✅ 14 with minor deficiencies ℹ️ 0 critical issues ⚠️ 📌 Inspector's note: The vehicle shows significant signs of use. The cab is heavily corroded. 📄 Interested in the full inspection report, additional photos, or a video? Tip: Use reference "32555 Equippo" for a detailed online search. 💡 Why choose this machine and our service: ✔ Comprehensive professional inspections ✔ Delivery directly to your jobsite ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Exploring other equipment? We provide practical tools and resources for all machine owners and operators – easily accessible on our platform.

Sąlyga: naujas, Sheet thickness: 10 mm Bending length: 4100 mm Top roll diameter: 330 mm Technical Data: - Hardened and polished rolls - Full body made from ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic feeding Prjdpfjd Ab Ryjx Afwjd - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 10,250 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Sąlyga: naujas, Bending length: 2100 mm Sheet thickness: 10 mm Top roll diameter: 210 mm Technical Specifications: - Hardened and polished rolls Prjdpfxsd Ab Tmj Afwod - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls are mounted with bearings - Top roll cover can be hydraulically opened and closed via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 4,600 We have numerous references!

Sąlyga: naujas, Bending length: 2600 mm Sheet thickness: 10 mm Top roll diameter: 230 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls are mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 6,600 We have numerous references! Prodpfx Ajd Ab Thofwed

Sąlyga: naujas, Bending length: 3100 mm Sheet thickness: 10 mm Predpfx Afed Ab Tcjwsd Top roll diameter: 270 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls are mounted with bearings - Top roll cover, hydraulically openable and lockable via control panel - All rolls are driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 7,070 We have numerous references!

Sąlyga: naujas, Sheet Thickness: 10 mm Bending Length: 3100 mm Top Roller Diameter: 270 mm Technical Specifications: - Hardened and polished rollers - Complete body made of ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positioning - Hydraulic adjustment Peded Ab R Sjpfx Afwjrd - Top and bottom rollers driven by hydraulic system and gearbox - Vertical movement of the lower roller is hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roller - Adjustable support system for lower roller (for special customer requirements) We have numerous references!

Sąlyga: naujas, Sheet thickness: 10 Bending length: 2600 mm Upper roll diameter: 230 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel Psdpfxsd Ab Sbe Afwjrd - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Upper and lower rolls driven by hydraulics and gearbox - Vertical movement of the lower roll hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EURO 4,681 - Material feed table: EURO 3,400 - Oil cooler: EURO 1,040 - Central support: EURO 8,250 - Side supports: EURO 6,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for specific customer requirements) We have many references!

Sąlyga: naujas, Sheet thickness: 10 mm Bending length: 2100 mm Top roll diameter: 210 mm Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and lower rolls driven by hydraulics and gearbox - The vertical movements of the lower roll are hydraulically powered - Mobile control panel - In accordance with CE standards Options: - Variable rotation speed EUR 3,681 Pedpod Ab Sgefx Afwerd - Material feed table EUR 2,400 - Oil cooler EUR 1,040 - Central support EUR 6,250 - Side supports EUR 3,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements)

Sąlyga: naujas, Bending length: 4100 mm Sheet thickness: 9 mm Upper roll diameter: 330 mm Technical data: Prodpfxed Ab S Hs Afwsd - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Upper roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 10,250 We have many references!