Ejd 220 pirkti naudotą (9 557)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
paspaudimas
Aukcionas pasibaigęs
München-Flughafen
1 126 km
Jungheinrich - žemo pakėlimo padėklų vežimėlis
JungheinrichERD 220 KLPF
Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), mašinos/transporto priemonės numeris: 90449981, Gamybos metai: 2014, veikimo valandos: 11 310 h, Šis Jungheinrich žemagrindis padėklų krautuvas, tipas: ERD 220 KLPF, parduodamas mūsų pramonės/mašinų aukcione – Miuncheno oro uosto sandėlio valymo aukcione.
Dcedpfx Adsxztr Temor
mažas skelbimas
Wackersdorf
1 029 km
Mikroautobusas
Mercedes-BenzV 220 d EDITION Lang ACC AUT Facelift Kam. LED
Skambinti
Sąlyga: naudotas, rida: 157 500 km, galia: 120 kW (163,15 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, bendras svoris: 3 100 kg, pirmoji registracija: 09/2020, emisijos klasė: Euro 6, energinis efektyvumas: A, spalva: juodas, pakaba: plienas, sėdimų vietų skaičius: 6, kuras: dyzelinas, Įranga: ABS, borto kompiuteris, centrinis užraktas, imobilaizerio sistema, kruizo kontrolė, oro kondicionavimas, oro pagalvė, statymo jutikliai, stumdomos durys, suodžių filtras, sėdynės šildytuvas, vairo stiprintuvas,
mažas skelbimas
Zeithain
820 km
Mikroautobusas
Mercedes-BenzV 220 d EDITION nur an Gewerbe LED Comand Distr. AHK
Skambinti
Sąlyga: naudotas, rida: 112 300 km, galia: 120 kW (163,15 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, bendras svoris: 3 100 kg, pirmoji registracija: 11/2017, emisijos klasė: Euro 6, energinis efektyvumas: A, spalva: sidabras, pakaba: plienas, kuras: dyzelinas, Įranga: ABS, borto kompiuteris, centrinis užraktas, imobilaizerio sistema, navigacijos sistema, oro kondicionavimas, oro pagalvė, statymo jutikliai, stumdomos durys, suodžių filtras, sėdynės šildytuvas, vairo stiprintuvas,
mažas skelbimas
Wunstorf
996 km
Šakinis krautuvas
JungheinrichEFG 220
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: FN639489, Gamybos metai: 2021, veikimo valandos: 6 057 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 4 400 mm, laisvas kėlimas: 1 400 mm, apkrovos centras: 500 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 040 mm, baterijos talpa: 750 Ah, akumuliatoriaus įtampa: 48 V, šakių ilgis: 1 000 mm, padang padangų: 100 procentas, Priekinės padangos tipas: superelastinės padangos (juodos), galinės padangos tipas: superelastinės padangos (juodos), tuščias svoris: 3 662 kg, Įranga: apšvietimas, šoninis poslinkis, Jungheinrich EFG 220 triračis elektrinis krautuvas, pagamintas 2021 m., su trigubu stiebu ir pilnu laisvu kėlimu
Duomenys:
- Modelis: Jungheinrich EFG 220
- Pagaminimo metai: 2021
- Perskaitytos darbo valandos: 6057
- Stiebo tipas: trigubas
- Kėlimo aukštis: 4400 mm
- Laisvo kėlimo aukštis: 1400 mm
- Statybinis aukštis: 2040 mm
- Priedai: šoninis poslinkis
- Keliamoji galia: 2000 kg
- Šakių ilgis: 1000 mm
- Nuosavas svoris: 3662 kg
Djdox Atzkopfx Admecr
- Papildoma hidraulika (įrenginio pusėje): ZH2
- Papildoma hidraulika (stiebo pusėje): ZH2
- Priekinės padangos: naujos superelastinės
- Galinės padangos: naujos superelastinės
- Akumuliatoriaus gamybos metai: 2021
- Akumuliatoriaus talpa: 750 Ah
- Akumuliatoriaus įtampa: 48 V
- Priedai: darbo žibintai priekyje ir gale, galinis raudonas saugos žibintas, krovinio apsauginis tinklelis
- Pastaba: pilnas laisvas kėlimas. ZH2 – 4 krypčių vožtuvas iki šakių laikiklio. Visos padangos naujos.
mažas skelbimas
Brilon
1 098 km
Mikroautobusas
MERCEDES-BENZV 220 d EDITION Lang STANDHZ+BURMESTER+DISTRONIC
Skambinti
Sąlyga: naudotas, rida: 49 718 km, galia: 120 kW (163,15 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, pirmoji registracija: 01/2023, emisijos klasė: Euro 6, spalva: pilkas, sėdimų vietų skaičius: 6, Įranga: ABS, autonominis šildytuvas, centrinis užraktas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas, suodžių filtras,
mažas skelbimas
Hamburg
912 km
Priedai
StabauA26-LGT 220/750 Langguttraverse
Skambinti
Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, keliamoji galia: 22 000 kg, tuščias svoris: 3 165 kg, statybos plotis: 6 000 mm, Accessories
Load center: 750
Mast type: None
Dcjdou Dz R Djpfx Admsr
Condition: Operational and fully functional
Technical condition: Very good
Description: 2x forks: 250 x 80 x 2,400 mm
mažas skelbimas
Wiefelstede
1 046 km
Inverterinis suvirinimo aparatas 220 A
KemppiMaster 2000
Skambinti
Sąlyga: geras (naudotas), TIG suvirinimo aparatas, inverterinis suvirinimo aparatas, TIG suvirinimo įrenginys, inverterinis TIG suvirinimo įrenginys, elektrodinis suvirinimo aparatas
- Gamintojas: Kemppi, suvirinimo aparato tipas Master 2000
- Suvirinimo galingumas: maks. 220 A
Dcjdpjxyfnwofx Admjr
- Priedai: suvirinimo kabelis su elektrodo laikikliu, masės kabelis
- Matmenys: 480/150/H300 mm
- Svoris: 18,6 kg
mažas skelbimas
Wijchen
1 253 km
Ketursienio obliavimo staklės Futura Modul 4 220/S 2000
FuturaModul 4 220/S
Skambinti
Sąlyga: naudotas, Gamybos metai: 2000, Tuščiasis svoris: 1.500 kg
Matmenys (I x P x A): 340 x 160 x 110 cm
Keturių pusių obliavimo staklės
Futura-Modul 4 - 220 S
Didžiausias darbo plotis: 220 mm
Didžiausias darbo aukštis: 120 mm
Veleno skersmuo: 40 mm
Įleidimo stalas: 2250 mm
1. Apatinis velenas 5,5 AG
2. Dešinysis velenas 4 AG
3. Kairysis velenas 4 AG
4. Viršutinis velenas 5,5 AG
Tersa obliavimo galvutės
Pagaminimo metai: 2000
380V
Transportavimo matmenys: 3400 x 1100 x 1600 mm, svoris 1500 kg
- Pagaminimo metai: 2000
Dcjdpfjwnhbfex Admsr
- Dokumentacija prieinama: Ne
- CE sertifikatas: Ne
- Transportavimo matmenys: 3400 mm x 1600 mm x 1100 mm (i x p x a)
- Transportavimo svoris [kg]: 1500 kg
Finansinė informacija
PVM: Nurodyta kaina be PVM
PVM/Skirtumo apmokestinimas: PVM atskaitomas įmonėms
Pristatymas ir mainai galimi bet kuriam pramonės sektoriaus įrenginiui
Yorick Diebels
mažas skelbimas
Hannover
979 km
Įpurškimo liejimo mašina
KraussMaffeiKM 80-220 C2
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Here we offer a very well-maintained, regularly serviced injection molding machine. We are also happy to take well-maintained machines from year of manufacture 2005 onwards in part exchange. Please offer us your available machines.
Complete maintenance by manufacturer ongoing.
Injection Molding Machine:
Manufacturer / Model: Krauss Maffei KM80-220 C2
Serial No.: 61006272
Year of manufacture: 2004
Control system: MC4
Clamping Unit
Dsdpfxjh Dr E Te Admscr
Clamping force: 800 kN / 80 tons
Tie bar spacing: 405 x 405 mm
Min. mold installation height: 250 mm
Max. platen distance: 750 mm
Standard platen size: 610 x 610 mm
Ejector stroke: 150 mm
Core pull: 1x unit
Injection Unit
Injection unit / Cylinder Ø: 20 mm / Cylinder Ø 30 mm
Max. shot weight (Ø30): 77g/PS
Injection flow rate: 73 cm³/sec
Specific injection pressure: 2500 bar
Handling interface: Euromap 12
Coloring interface: Yes
Dimensions & Weights
Weight with control cabinet: 3.8 t
Length: 3,800 mm
Width (machine only): 1,050 mm
Height: 1,890 mm
Oil capacity: 270 L
Location: Hanover / Lower Saxony
The machine is in excellent condition and can be inspected under power. Any peripherals shown in pictures are NOT part of the offer!
The machine is available immediately.
Free loaded onto buyer’s truck or free delivery to site against reimbursement of freight costs.
About the machines and our company:
- We only sell our own machines purchased from running production, from our Hanover warehouse
- All machines offered are checked and tested before removal
- We do NOT sell insolvency goods – we are NOT brokers dealing with third-party property
- All machines offered come from successful companies for whom maintenance and care are a given
- All offered machines are available for inspection at our warehouse
mažas skelbimas
Izdebnik
651 km
Ilgas juostinis šlifuoklis
SZLIFIERKA DŁUGOTAŚMOWA HOUFEKHOUFEK BASSET PBH 220
Skambinti
Sąlyga: labai geros būklės (naudotas), Table length: 2200 mm
Table width: 110 mm
Motor power: 3 kW
Power supply: 400 V
Belt width: 150 mm
Manual table height adjustment
Dcodpjv S Umwefx Admor
Safety switch
Frequency inverter – variable belt speed control
Year of manufacture: 2007
mažas skelbimas
Dresden
819 km
Furgon
MERCEDES-BENZ220 OTP, W 187, Offener Tourenwagen Polizei, 2 +
Skambinti
Sąlyga: naudotas, rida: 51 884 km, galia: 59 kW (80,22 AG), kuro tipas: benzinas, pavaros tipas: mechaninis, pirmoji registracija: 10/1952, spalva: žalia, sėdimų vietų skaičius: 5,
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK KletzerLaser Fiber FLC-P 1530 4 kW + 220 mm Rohrschneidev
Skambinti
Sąlyga: naujas, Laser power: 4 kW
Working area: 1500 x 3000 mm
Load capacity: 1200 kg
X-axis travel: 1520 mm
y-axis travel: 3030 mm
Positioning accuracy: 0.05 mm
Repeatability: 0.03 mm
Dimensions (LxWxH): 10,000 x 400 x 2,120 mm
The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine meeting top-end standards. Capable of supporting up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and systems.
It is an ideal cutting machine for those looking to outsource their cutting processes.
Simple operations such as blowing, cutting, pausing, calibration simulation, etc., can be carried out easily with the wireless remote control.
Standard nesting software enables quick and operator-free preparation of cut parts, making them ready for processing. It also features a fly-cutting function.
As a dual shuttle table system, cutting can continue without waiting times.
All our machines are manufactured according to European standards and come with a CE certificate.
Our FLC models come equipped with nozzle cleaning and a dual camera system.
Available cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Dsdperuwazjfx Admscr
Our laser head offers autofocus, active anti-collision, and Auto-View function, which detects obstacles and adjusts automatically.
Cutting heads feature automatic cooling.
The bridges used in all of our machines are a single-piece welded construction made from aluminum alloy sheets. This one-piece design ensures bridge rigidity and prevents deformation during shocks, overlaps, or mechanical loads. Additionally, due to their structure being three times lighter than steel bridge profiles, we achieve higher speeds and accelerations with reduced motor power.
Included accessories:
- Water chiller
- Electrical cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch touch CNC control
- Flying cut function
- Nozzle and lens starter kit
- Workpiece debris drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE conformity
- On-site machine training
- Wireless remote monitoring
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS VALUE
Working area 1500 x 3000 mm
Load capacity 1200 kg
XY-axis travel 1520 x 3030 mm
Z-axis stroke 300 mm
XYZ-axis guide 4-point ball cage
XY-axis drive system Rack and pinion
Z-axis drive system Ball screw
XY-axis speed 100 m/min
Z-axis speed 30 m/min
XY positioning accuracy 0.05 mm
XY repeatability 0.03 mm
Table change time 10 s
Laser source Raycus / Hans / JPT
Laser source output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system Fscut
Laser cutting head Raytools / BOCI / WSX
Supported gases Air/Oxygen/Nitrogen
Cooling type Water-cooled
Machine weight 12,000 kg
Machine dimensions ...
mažas skelbimas
D- Eckental
1 061 km
Elektrinis trijų ratų krautuvas
JungheinrichEFG 220 GE115-330ZZ Li-Ion Batterie
Skambinti
Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 6 984 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 3 300 mm, laisvas kėlimas: 1 530 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 2 172 mm, šakių laikiklio plotis: 980 mm, šakių ilgis: 1 150 mm, tuščias svoris: 3 510 kg, bendras ilgis: 1 995 mm, pavaros tipas: Elektro, statybos plotis: 1 120 mm, Electric 3-wheel forklift
Load centre: 500 mm
Fork width: 100 mm
Fork thickness: 40 mm
ISO class: ISO Class 2 = 1,000 - 2,500 kg
Mast type: Duplex
Technical condition: very good
Front tyres type: Superelastic
Front tyres size: 200/50-10
Front tyres condition: 20 - 40%
Rear tyres type: Superelastic
Rear tyres size: 140/55-9
Rear tyres condition: 40 - 60%
Battery voltage: 48V
Battery capacity: 360Ah
Dodpfxjxya Uxs Admjcr
Battery manufacturer: Jungheinrich
Battery type: Lithium-ion
Battery year: 2019
Description: Inspection and safety check (UVV) new
Sideshift,
3rd valve, 4th valve, rear working lights, front working lights, roof cover, windscreen, half-cab, heating, full cab, full free lift, safety light, safety pilot, lithium-ion technology, interior mirror, joystick, wiper, single pedal, 3-wheel,
1-pedal operation, joystick (Solo-Pilot), multi-color display, comfort seat, positioning laser, BlueSpot front and rear, 2 working lights front and rear
mažas skelbimas
Wijchen
1 253 km
Keturpusės obliavimo staklės Wadkin GD 220
WadkinGD 220
Skambinti
Sąlyga: naudotas, Net weight: 2,000 kg
Dcodpfjwng Tgjx Admor
Dimensions (L x W x H): 380 x 150 x 150 cm
Four-side planer
Wadkin GDP220
Capacity: 220 x 120 mm
2000 mm long infeed table
4 spindles
Tersa cutterheads
Feed roller
Bottom spindle: 5.5 kW
Right/Left spindle: 5.5 kW each
Top spindle: 5.5 kW
Variable feed speeds: 5 - 30 m/min
Pneumatic pressure on feed rollers
Spindles with 40 mm diameter
Mechanical digital readout for spindle adjustment
Manual Waxalite pump
Motorized adjustment for left spindle on/off with mechanical digital display
- Documentation available: No
- CE Certificate available: No
- Number of spindles [pcs]: 4
- Spindle 1:
- Spindle type: Bottom
- Motor power [kW]: 5.5
- Spindle diameter [mm]: 40
- Tooling available: Yes
- Spindle 2:
- Spindle type: Right
- Motor power [kW]: 5.5
- Spindle diameter [mm]: 40
- Tooling available: Yes
- Spindle 3:
- Spindle type: Left
- Spindle diameter [mm]: 40
- Tooling available: Yes
- Spindle 4:
- Spindle type: Top
- Motor power [kW]: 5.5
- Spindle diameter [mm]: 40
- Tooling available: Yes
- Max. planing width [mm]: 220
- Max. planing height [mm]: 120
- Infeed table length [mm]: 2000
- Tool type: Tersa
- Transport dimensions: 3800 mm x 1500 mm x 1500 mm (l x w x h)
- Transport weight [kg]: 2000 kg
- Number of transport packages: 2
Financial Information:
VAT: The quoted price is plus VAT
VAT/margin taxation: VAT deductible for business customers
Delivery and trade-in possible at any time for all types of industrial equipment
Yorick Diebels
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK-IndustriesLaser Fiber FLC-P 2040 4 kW + 220 mm Rohrschneide
Skambinti
Sąlyga: naujas, Laser Power: 4 Loading capacity: 1250 kg X-axis travel: 2020 mm Y-axis travel: 4050 mm Z-axis travel: 350 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table exchange time: approx. 10 s Cooling system: water chiller Weight approx.: 11,500 kg Dimensions (LxWxH): 4400 x 10,000 x 2,120 mm
The FLC Series is a fast, highly sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with upper-class standards. The machine can accommodate laser power up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are typically used in the production of agricultural machinery, textile machinery, food processing machinery, construction machinery, elevators, and other large-scale machinery and equipment.
It is an ideal cutting solution for those looking to outsource cutting operations.
Enables easy blowing, cutting, pausing, calibration simulation, and more with wireless remote control.
Standard nesting software program that prepares parts for cutting very quickly and automatically, requiring no operator intervention. Also equipped with a flycut cutting function.
Thanks to the dual shuttle table, you can continue cutting without downtime.
All our machines are manufactured to European standards and have CE certification.
Our FLC models feature automatic nozzle cleaning and a dual camera system.
Available cutting areas include 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
The laser head is equipped with autofocus and an active anti-collision function, as well as an auto-view function that detects obstacles and automatically moves away.
Dcedpjruwbiefx Admer
Cutting heads feature automatic cooling.
The bridge used in all our machines is made of a single-piece welded aluminum alloy sheet construction. The single-piece design ensures bridge rigidity and prevents deformation, maintaining its shape when subjected to impact, overlap, or load. Furthermore, due to its structure being three times lighter than steel bridge profiles, we achieve higher speeds and accelerations with lower motor power.
Included accessories:
- Water chiller
- Control cabinet cooling
- Automatic focusing head
- Nesting software
- 19-inch touch CNC controller
- Fly cutting
- Nozzle and lens starter kit
- Parts debris drawers
- Automatic table exchanger
- Automatic nozzle cleaning
- CE compliance
- On-site machine training
- Wireless remote query
- Automatic lubrication system
- Dual camera
SPECIFICATIONS VALUE
Working area: 2000 x 4000 mm
Loading capacity: 1200 kg
XY axis travel: 2020 x 4050 mm
Z-axis travel: 350 mm
XYZ axis guidance: 4-point ball cage
XY axis drive system: Rack and pinion
Z-axis drive system: Ball screw
XY axis speed: 100 m/min
Z-axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Table exchange time: 10 s
Laser source: Raycus / Hans / JPT
Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system: Fscut
Laser cutting head: Raytools / BOCI / WSX
Supported assist gases: Air/N2
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK-IndustriesLaser Fiber FLC-P 2040 12 kW + 220 mm Rohrschneid
Skambinti
Sąlyga: naujas, Laser power: 12Loading capacity: 1250x-axis travel: 2020y-axis travel: 4050z-axis travel: 350Positioning accuracy: 0.05Repeatability: 0.03Table change time: approx. 10Cooling unit: water coolerWeight approx.: 11,500Dimensions (LxWxH): 4400 x 10,000 x 2120
The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutter with upper-class standards. Capable of handling up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food processing machines, construction equipment, elevators, and other large machinery and systems.
This is an ideal cutting machine for anyone looking to outsource their cutting processes.
The wireless remote control allows for easy blowing, cutting, pausing, calibration simulation, etc.
A standard nesting software program enables rapid and operator-free preparation of parts for cutting, and also features a flycut function.
Featuring a dual-exchange table system, you can continue cutting without downtime between table changes.
All our machines are manufactured in accordance with European standards and are CE certified.
Our FLC model machines are equipped with nozzle cleaning and a dual-camera system.
Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
The laser head features autofocus, active anti-collision, and an auto-view function that recognizes obstacles and moves automatically.
Cutting heads have automatic cooling.
All machine bridges are made from a single-piece welded aluminum alloy plate construction. This one-piece structure ensures rigidity and prevents the bridge from deforming due to impacts, overlaps, or loads. Furthermore, thanks to its considerably lighter weight compared to steel profile bridges, we achieve higher speeds and accelerations with reduced motor power.
Accessories included:
- Water chiller
- Electrical cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch touch CNC control panel
- Fly cutting
- Nozzle and lens starter kit
- Parts debris drawers
- Automatic table exchanger
- Automatic nozzle cleaning
- CE conformity
- On-site machine training
- Wireless remote diagnostics
- Automatic lubrication system
Dodpsruwbqsfx Admocr
- Dual-camera system
SPECIFICATIONS VALUE
Working area: 2000 x 4000 mm
Load capacity: 1200 kg
XY-axis travel: 2020 x 4050 mm
Z-axis travel: 350 mm
XYZ-axis guide: 4-point ball cage
XY-axis drive system: rack and pinion
Z-axis drive system: ball screw
XY-axis speed: 100 m/min
Z-axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Table change time: 10 sec
Laser source: Raycus / Hans / JPT
Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system: Fscut
Laser
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK-IndustriesLaser Fiber FLC-P 2040 2 kW + 220 mm Rohrschneide
Skambinti
Sąlyga: naujas, Laser power: 2
Loading capacity: 1250 kg
X travel: 2020 mm
Y travel: 4050 mm
Z travel: 350 mm
Positioning accuracy: 0.05 mm
Repeatability: 0.03 mm
Table change time: approx. 10 sec
Coolant system: Water chiller
Weight approx.: 11,500 kg
Dimensions (LxWxH): 4400 x 10,000 x 2120 mm
The FLC Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine built to premium-class standards. It can accommodate laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the production of agricultural machinery, textile machinery, food processing machinery, construction machinery, elevators, and various large-scale machines and equipment.
It is an ideal cutting machine for those looking to outsource their cutting needs.
Enables easy blowing, cutting, pausing, calibration simulation, etc., via wireless remote control.
Standard nesting software program quickly prepares parts for cutting without operator input. Includes a flycut feature.
Owing to the dual shuttle table system, cutting can proceed without downtime.
All our machines are manufactured to European standards and come with CE certification.
Our FLC models feature nozzle cleaning and a dual camera system.
Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Our laser head features autofocus, active anti-collision, and auto-view functions that detect obstacles and automatically reposition.
Cutting heads feature automatic cooling.
The bridges in all our machines are manufactured from one-piece welded aluminum alloy plates. This monolithic construction ensures high rigidity, prevents deformation under impact, overlap, or load, and maintains shape integrity. Additionally, the bridges are three times lighter than steel profile bridges, allowing higher speeds and acceleration with lower motor power.
Dedsruwbxspfx Admecr
Included accessories:
- Water chiller
- Electrical cabinet cooling
- Autofocus head
- Nesting software
- 19-inch touchscreen CNC control
- Flycutting
- Nozzle and lens starter kit
- Part debris drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE compliance
- On-site machine training
- Wireless remote inquiry
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS VALUE
Working area 2000 x 4000 mm
Max. load capacity 1200 kg
X/Y axis travel 2020 x 4050 mm
Z axis stroke 350 mm
XYZ axis guide 4-point ball bearing
X/Y axis drive system Rack and pinion
Z axis drive Ball screw
X/Y axis speed 100 m/min
Z axis speed 30 m/min
X/Y axis accuracy 0.05 mm
X/Y axis repeatability 0.03 mm
Table change time 10 sec
Laser source Raycus / Hans / JPT
Laser output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC controller FSCUT
Laser cutting head Raytools / BOCI / WSX
Supported gases Air/Oxygen/Nit...
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK-IndustriesLaser Fiber FLC-P 2060 6 kW + 220 mm Rohrschneide
Skambinti
Sąlyga: naujas, Laser power: 6Loading capacity: 1250Positioning accuracy: 0.05Repeatability: 0.03Table changeover time: approx. 15Cooling system: Water chillerWeight approx.: 17,500Dimensions (LxWxH): 4,400 x 9,500 x 2,350 mmMax. speed: 120Tube diameter: 220Working area: 2,000 x 6,000
The FLC-P series is a fast, precise, reliable, and cost-effective fiber laser cutting machine for tube and profile cutting. This is a high-efficiency, upper-class-standard laser cutting machine. It can reach laser power levels of up to 20,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machinery, food machinery, construction equipment, elevator manufacturing, and other large-scale machines and installations.
You do not need to purchase two separate machines. You can cut both sheet metal and tube profiles.
Its compact design saves space.
One machine, two applications. Cuts both sheets and metal tubes/profiles.
Standard tube/profile cutting length is 6 meters, optional up to 9 meters.
Tube diameters up to 350 mm possible.
Chucks can be clamped and automatically centered at the press of a button.
Wireless remote control allows for easy blowing, cutting, pausing, calibration simulation, etc.
Standard nesting software quickly prepares parts for cutting without operator intervention, and includes a flycut cutting function.
Dual shuttle tables mean cutting can continue without waiting times.
All our machines are manufactured to European standards and are CE certified.
Our FLC machines feature nozzle cleaning and a dual camera system.
Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Our laser head includes autofocus and active anti-collision function, with auto-view for obstacle detection and automatic movement.
Cutting heads feature automatic cooling.
The bridges in all our machines are made from a single-piece welded aluminum sheet construction. This one-piece design guarantees bridge rigidity and ensures shape retention, preventing deformation from shocks, overlaps, or loads. Additionally, their structure is three times lighter than steel profile bridges, enabling high speeds and acceleration with less drive power.
Accessories included:
- Water chiller
- Control cabinet cooling
- Automatic autofocus head
- Nesting software
- 19-inch touch CNC control
- Flycutting
- Nozzle and lens starter kit
- Parts collection drawers
- Automatic table changer
- Automatic nozzle cleaning
Dcsdpfxotwtn Ie Admor
- CE compliance
- On-site operator training
- Wireless remote interface
- Automatic lubrication system
- Dual camera system
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK KletzerLaser Fiber FLC-P 1530 2 kW + 220 mm Rohrschneidev
Skambinti
Sąlyga: naujas, Laser power: 2 Working area: 1500 x 3000 mm Load capacity: 1250 kg X-axis travel: 1520 mm Y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Dimensions (LxWxH): 13,000 x 4,400 x 2,350 mm Approx. weight: 12,500 kg
The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutter with premium-class standards. It can accommodate up to 30,000 W laser power, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment.
It is an ideal cutter for anyone looking to outsource their cutting needs.
The wireless remote control allows for easy blowing, cutting, pausing, calibration simulation, etc.
Standard nesting software program enables extremely fast preparation of parts for cutting without operator intervention. Also features a flycut function.
As this is a dual shuttle table system, you can continue cutting with no downtime.
All our machines are manufactured to European standards and have CE certification.
Our FLC series machines are equipped with nozzle cleaning and dual camera systems.
Available cutting bed sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
The laser head offers autofocus and active anti-collision features, plus an Auto-View function that detects obstacles and moves automatically.
Cutting heads are equipped with automatic cooling.
The bridges used in all our machines are made from single-piece welded aluminum alloy plates. This single-piece design ensures bridge rigidity and prevents deformation resulting from impacts, overlaps, or loads. Thanks to their structure, which is three times lighter than steel bridges, we achieve high speed and acceleration with lower motor power.
Included accessories:
- Water chiller
- Electrical cabinet cooling
- Automatic focus head
Dcedperuwapjfx Admor
- Nesting software
- 19-inch touchscreen CNC control
- Fly cutting
- Nozzles and lenses (starter kit included)
- Part debris drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE compliance
- On-site machine training
- Wireless remote access
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS VALUE
Working area: 1500 x 3000 mm
Load capacity: 1200 kg
XY travel: 1520 x 3030 mm
Z travel: 300 mm
XYZ guidance: 4-point ball cage
XY drive system: Rack and pinion
Z-axis drive system: Ball screw
XY-axis speed: 100 m/min
Z-axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Table change time: 10 sec
Laser source: Raycus / Hans / JPT
Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system: Fscut
Laser cutting head: Raytools / BOCI / WSX
Supported gases: Air / Oxygen / Nitrogen
Cooling type: Water cooling
mažas skelbimas
Austrija
963 km
CNC presų stabdžiai
KK KletzerCNC Abkantpresse KKI EUROPA XL 6050 mm x 220 to, Y
Skambinti
Sąlyga: naujas, Pressure: 220
Bending length: 6050 mm
Distance between uprights: 5100 mm
Installation height: 600 mm
(max.) Stroke length: 350 mm
Throat depth: 450 mm
Dimensions (LxWxH): 6775 x 2650 x 3250 mm
Approx. weight: 18,000 kg
4 axes (Y1, Y2, X, R): Yes, all axes are controlled via the Esa S630 controller (2D graphic control)
CNC crowning via controller: Yes, via the Esa S630 CNC crowning control (2D graphic control)
Motor power: 22 kW
Standard equipment:
KK Kletzer Europe
We have put together a high-quality model for the European market.
The CNC press brake from KK-Industries in Turkey.
Model KKI EUROPA XL
The robust EUROPA XL press brake is characterized by its high precision, accuracy, and versatile range of applications.
The EUROPA XL features a very large installation height, resulting in an extended stroke (cylinder travel).
The generous throat depth further expands the machine’s working envelope, ensuring minimal limitations.
We focus on premium quality—reflected in the control system as well.
As standard, we provide the high-end Esa S640 (2D graphic control).
Additionally, the KKI Europa XL press brake comes equipped with CNC-controlled Y1, Y2, X, and R axes via the controller.
Naturally, the CNC crowning control Esa S640 (2D graphic control) is also included.
We make no compromises regarding the upper tool and die, fitting the KKI EUROPA XL CNC press brake with premium tooling from EUROSTAMP Italy.
Of course, a machine is only as good as its service, which is why we emphasize highly qualified personnel with many years of experience in the CNC sheet metal processing sector.
CNC axes Y1, Y2, X and R
Esa S640 (2D graphic control)
Backgauge with double linear guide and ball screw
Motorized crowning device with CNC control
Heavy-duty design, height adjustment via handwheel; from 175 tons upwards, heavy-duty linear guide version
Dsdpfx Ajd Ehh Usdmscr
Laser safety device on upper beam
CE safety equipment
Various options available
Alternative control systems:
- ESA 640 2D 15'' touchscreen control: €4,520,-- incl.
- ESA 675 W 3D 21'' touchscreen control (Windows base): €6,485,--
- DELEM 66 T 2D 17'' touchscreen control (Windows base): €10,165,--
- DELEM 69 T 3D 17'' touchscreen control (Windows base): €16,350,--
KK-Industries GmbH
Something for everyone!
mažas skelbimas
Austrija
963 km
CNC presų stabdžiai
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 220 to, Y
Skambinti
Sąlyga: naujas, Pressure: 220 Bending length: 3020 mm Frame gap: 2550 mm Installation height: 600 mm Stroke length (max.): 350 mm Throat depth: 450 mm Dimensions (LxWxH): 3745x2290x3055 mm Weight approx.: 11,250 kg 4 axes (Y1, Y2, X, R): Yes, all axes controlled via Delem DA 66 (2D graphic control) CNC crowning via control: yes, via the CNC control Delem DA 66 (2D graphic control) Motor power: 22 kW
Standard equipment:
KK Kletzer Europa
We have assembled a high-quality model for Europe.
The CNC press brake KK-Industries made by DENER:
Model KK Kletzer EUROPA XL
The robust EUROPA XL press brake stands out due to its high precision, accuracy, and versatile field of application. The EUROPA XL offers a very large installation height, resulting in a large stroke (cylinder travel). The throat depth is also above average to offer maximum flexibility. We place great emphasis on quality, which is also reflected in the control system. As standard, we have equipped it with the high-quality Esa S640 (2D graphic controller). Furthermore, the KKI Europa XL press brake features Y1, Y2, X, and R CNC axes controlled via the system. Naturally, CNC crowning is also included via the Esa S640 (2D graphic control).
We make no compromises on the upper tool and die, equipping the KKI EUROPA XL press brake with quality tools from EUROSTAMP Italy. Of course, a machine is only as good as its service—this is why we focus on highly qualified personnel with many years of experience in CNC sheet metal processing.
CNC axes Y1, Y2, X and R axis
Esa S 640 (2D graphic control)
Back gauge with double linear guide and ball screw spindle
Motorized crowning device with CNC control
Heavy-duty design with height adjustment by handwheel, heavy-duty version on linear guide from 175 tons
Laser safety device on the upper beam
CE safety equipment
Various options available
Dsdpfx Asd Edhlodmjcr
Other controls available:
ESA 640 2D 15'' touchscreen control ¤ 4,520 incl.
ESA 675 W 3D 21'' touchscreen control (Windows Base) ¤ 6,485
DELEM 66 T 2D 17'' touchscreen control (Windows Base) ¤ 10,165
DELEM 69 T 3D 17'' touchscreen control (Windows Base) ¤ 16,350
KK-Industries GmbH
There is something for everyone!
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas
Austrija
963 km
CNC presų stabdžiai
KK KletzerCNC Abkantpresse KKI EUROPA XL 4050 mm x 220 to, Y
Skambinti
Sąlyga: naujas, Pressure: 220
Bending length: 4050 mm
Distance between uprights: 3550 mm
Installation height: 600 mm
Stroke length (max.): 350 mm
Throat depth: 450 mm
Dimensions (LxWxH): 4740 x 2290 x 3050 mm
Weight approx.: 13,350 kg
4 axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control)
CNC crowning via control: Yes, via Esa S630 (2D graphic control)
Motor power: 22 kW
Standard equipment:
CNC Press Brake
We have assembled a high-quality model for Europe.
The CNC press brake KK-Industries in Turkey
Model KKI EUROPA XL
The robust EUROPA XL press brake stands out due to its high precision, accuracy, and versatile range of applications.
EUROPA XL features a very large installation height, resulting in a generous stroke (cylinder travel).
The throat depth is also exceptionally large to ensure minimal limitation during operations.
We prioritize quality, which is reflected in the control system as well. As standard, we use the premium Esa S640 (2D graphic control).
Additionally, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R, all operated via the control system.
Of course, CNC crowning control via the Esa S640 (2D graphic control) is also included.
There are no compromises made on the upper tool and die – the KKI EUROPA XL CNC press brake is equipped with quality tooling from EUROSTAMP Italy.
Naturally, a machine is only as good as its service. For this reason, we place great emphasis on highly qualified staff with many years of experience in CNC sheet metal processing.
CNC Axes Y1, Y2, X, and R
Dcodped Ehicjfx Admsr
Esa S640 (2D graphic control)
Backgauge with double linear guide and ball screw drive
Motorized CNC-controlled crowning system
Heavy-duty height adjustment with handwheel; from 175 t, heavy-duty model with linear guide
Laser protection device on the upper beam
CE-compliant safety equipment
Various options available
Further available controls:
ESA 640 2D 15” touchscreen control ..... € 4,520 (incl.)
ESA 675 W 3D 21” touchscreen control (Windows-based) ..... € 6,485
DELEM 66 T 2D 17” touchscreen control (Windows-based) ..... € 10,165
DELEM 69 T 3D 17” touchscreen control (Windows-based) ..... € 16,350
KK-Industries GmbH
There’s something for everyone!
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK KletzerLaser Fiber FLC-P 1530 3 kW + 220 mm Rohrschneidev
Skambinti
Sąlyga: naujas, Laser Power: 3Working Area: 1500 x 3000 mmLoad Capacity: 1200 kgX-Axis Travel: 1520 mmY-Axis Travel: 3030 mmPositioning Accuracy: 0.05 mmRepeatability: 0.03 mmDimensions (LxWxH): 10,000 x 400 x 2,120 mm
The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. This high-efficiency laser cutter meets upper-class industry standards and can handle laser powers of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for processing in the production of agricultural machinery, textile machines, food machinery, construction equipment, elevators, and other large-scale machines and systems.
It is an ideal cutter for anyone looking to outsource their cutting tasks.
The wireless remote control allows for easy blowing, cutting, pausing, calibration simulation, and more.
It comes with standard nesting software, which automatically arranges parts to be cut quickly and efficiently without the need for operator input, and features a flycut function for faster execution.
Thanks to its dual exchange table design, cutting can continue without interruption or waiting time.
All our machines are manufactured to European standards and come with CE certification.
Our FLC models are equipped with nozzle cleaning and a dual camera system.
Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
Our laser head features autofocus and an active anti-collision system, plus an auto-view function that detects obstacles and adjusts automatically.
The cutting heads are equipped with automatic cooling.
The bridges used in all our machines are made of a single-piece welded aluminum alloy plate construction. This one-piece design ensures bridge rigidity and prevents deformation caused by impact, overlaps, or heavy loads. Additionally, the structure is three times lighter than steel bridges, enabling higher speeds and acceleration with reduced motor power.
Dsdpfx Adjruwawjmjcr
Included Accessories:
- Water chiller
- Electrical cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch touch CNC control
- Flycut function
- Nozzle and lens starter kit
- Parts debris drawers
- Automatic table exchanger
- Automatic nozzle cleaning system
- CE Compliance certification
- On-site machine training
- Wireless remote monitoring
- Automated lubrication system
- Dual camera system
SPECIFICATIONS
ValueWorking area: 1500 x 3000 mmLoad capacity: 1200 kgXY-axis travel: 1520 x 3030 mmZ-axis travel: 300 mmXYZ-axis guide: 4-point ball cageXY-axis drive system: Rack and pinionZ-axis drive system: Ball screwXY-axis speed: 100 m/minZ-axis speed: 30 m/minXY-axis positioning accuracy: 0.05 mmXY-axis repeatability: 0.03 mmTable change time: 10 secLaser source: Raycus / Hans / JPTLaser power output: 2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC control system: FscutLaser cutting head: Raytools / BOCI / WSXSupported gases: Air/Oxygen/NitrogenCooling type: Water-cooledMachine weight: 12,000 kgMachine dimensions: [details truncated]
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK KletzerLaser Fiber FLC-P 1530 12 kW + 220 mm Rohrschneide
Skambinti
Sąlyga: naujas, Laser power: 12 kW
Working area: 1500 x 3000 mm
Loading capacity: 1200 kg
X-axis travel: 1520 mm
y-axis travel: 3030 mm
Positioning accuracy: 0.05 mm
Repeatability: 0.03 mm
Dimensions (LxWxH): 10,000 x 400 x 2,120 mm
The FLC Series is a fast, precise, reliable, and cost-efficient fiber laser cutting machine. It is a high-efficiency laser cutting machine built to upper-class standards. With a laser power capacity of up to 30,000 W, it is an excellent choice for cutting thick plate material. FLC fiber laser cutting machines are commonly used for processing agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and components.
This is an ideal cutting machine for those looking to outsource cutting services.
Easy control of blowing, cutting, pausing, calibration simulation, etc., via wireless remote control.
Includes standard nesting software that quickly nests parts for cutting with minimal operator intervention and features flycut cutting technology.
Thanks to the dual-exchange table, cutting can continue without waiting time.
All our machines are manufactured according to European standards and come with CE certification.
Our FLC series machines feature automatic nozzle cleaning and a dual camera system.
Available cutting area options: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
The laser head features autofocus, active collision avoidance, and auto-view functions that detect obstacles and reposition automatically.
The cutting heads are equipped with automatic cooling.
The bridges used in all our machines are made from a single-piece welded aluminum alloy plate construction, ensuring rigidity and preventing deformation under impact, overlap, or load. This single-piece design enables high speed and acceleration with lower motor power, being three times lighter than steel profile bridges.
Accessories included:
- Water chiller
- Control cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch touch CNC controller
- Flycutting
- Nozzle and lens starter kit
- Scrap drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE conformity
- On-site machine training
- Wireless remote monitoring
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS
Working area: 1500 x 3000 mm
Loading capacity: 1200 kg
XY-axis travel: 1520 x 3030 mm
Z-axis stroke: 300 mm
XYZ-axis guide: 4-point ball cage
XY-axis drive system: Rack and pinion
Z-axis drive system: Ball screw
XY-axis speed: 100 m/min
Z-axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Dcodpfx Adoruwa Tomer
Table change time: 10 sec
Laser source: Raycus / Hans / JPT
Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system: FSCUT
Laser cutting head: Raytools / BOCI / WSX
Supported gases: Air / Oxygen / Nitrogen
Cooling type: Water cooling
Machine weight: 12,000 kg
mažas skelbimas
Austrija
963 km
Šviesolaidinis lazeris
KK-IndustriesLaser Fiber FLC-P 2040 3 kW + 220 mm Rohrschneide
Skambinti
Sąlyga: naujas, Laser power: 3Loading capacity: 1250 x-travel: 2020mm y-travel: 4050mm z-travel: 350mmPositioning accuracy: 0.05mmRepeatability: 0.03mmTable changeover time: approx. 10sCoolant system: Water chillerApprox. weight: 11,500kgDimensions (LxWxH): 4400 x 10000 x 2120mm
The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system meeting upper price class standards. With support for up to 30,000W laser power, it's an excellent choice for thick plate cutting. FLC fiber laser cutters are typically used for processing in the production of agricultural machinery, textile machinery, food processing machines, construction equipment, elevators, and other large machinery and plants.
It's an ideal cutting solution for anyone looking to outsource their cutting operations.
Features allow for simple blowing, cutting, pausing, calibration simulation, etc., with wireless remote control.
Standard nesting software package ensures workpieces are ready for cutting very quickly and with minimal operator intervention. Fly-cutting capability is also included.
Thanks to its dual shuttle table, cutting can continue without downtime.
All our machines are manufactured to European standards and are CE certified.
Our FLC series machines offer nozzle cleaning and dual camera systems.
Available cutting areas: 1.5x3m, 2x4m, or 2x6m.
Our laser head features autofocus, active anti-collision system, and auto-view functionality, recognizing obstacles and moving automatically.
Cutting heads are equipped with automatic cooling.
All machine bridges consist of one-piece welded aluminum alloy plate construction. One-piece design ensures rigidity and prevents deformation of the bridge under impact, overlap, or load. Their significantly lower weight (three times lighter than steel) enables higher speeds and acceleration with less motor power.
Included accessories:
- Water chiller
- Control cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch CNC touch controller
- Fly-cutting function
- Nozzle and lens starter kit
- Scrap drawers for parts
- Automatic table shuttler
- Automatic nozzle cleaning
- CE compliance
- On-site machine training
- Wireless remote monitoring
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS VALUE
Working area 2000 x 4000 mm
Load capacity 1200 kg
XY travel 2020 x 4050 mm
Dcjdpfxetuyf Hj Admor
Z-axis travel 350 mm
XYZ axis guidance 4-point ball cage
XY drive system Rack and pinion
Z-axis drive system Ball screw
XY traverse speed 100 m/min
Z traverse speed 30 m/min
XY positioning accuracy 0.05 mm
XY repeatability 0.03 mm
Table changeover time 10 sec
Laser source Raycus / Hans / JPT
Laser power output 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
CNC control system Fscut
Laser cutting head Raytools / BOCI / WSX
Supported gases Air/Oxygen/Nitrogen
Palengviname jums paiešką: "ejd 220"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.













































































































































































































