Drehmaschien Gręžimo Staklės Frezavimo Staklės Multi Funkcija pirkti naudotą (58 170)

Gamybos metai: 2011, veikimo valandos: 8 000 h, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 041-045, AUERBACH drilling and milling machine, model AX3 TLF, year 2011, in good condition. Photos, dimensions, and nameplate attached in the images. Technical specifications: Longitudinal travel (X-axis) table: 1600 mm Cross travel (Z-axis) column: 700 mm Cross travel (W-axis) drilling head: 1300 mm Vertical travel (Y-axis) of the drilling head: 800 – 1200 mm Rotary axes: - B-axis rotary table: 360 degrees - A-axis drilling head: -25 to +15 degrees Drilling range – deep hole drilling: Diameter range: 3 – 32 mm Drilling depth in a single pass: 1300 mm Maximum possible drilling depth: 1700 mm Main drive / deep drilling module: Bdedpfxeg N Tb Nj Admek Rated drive power: 12 / 18.5 kW Speed range: 60 – 8000 rpm Spindle torque: 115 Nm Feed drive: Feed rate: 1 – 15 (on Y 1-10 axis) m/min Rapid traverse on all axes: 15 (Y-axis 10) m/min Machine dimensions / installation site: Weight – main machine: 12,000 kg Installation area size: - Width: 5500 mm - Depth: 5300 mm - Height: 3400 mm Location: Kopalniana 72 Tarnowskie Góry, Poland

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras ilgis: 5 000 mm, eigos ilgis: 100 mm, sukimosi greitis (maks.): 2 000 aps./min, bendras svoris: 150 kg, Nėra minimalaus kainos – garantuotas pardavimas už aukščiausią pasiūlytą kainą! Pakrovimas galimas 2025-09-08 arba 2025-09-09! TECHNINIAI DUOMENYS Darbo rodikliai Sukimosi greičio diapazonas: 355 – 2 000 aps./min. Darbinis eiga: 100 mm maks. atmušėjas: 3 000 mm Ritinėlių trasos ilgis kairėje: 1 580 mm Ritinėlių trasos ilgis dešinėje: 2 200 mm ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 5 000 x 6 100 x 1 900 Svoris: 150 kg Bdodpfx Aow Htcfodmjk ĮRANGA Ritinėlių trasos kairėje ir dešinėje

Sąlyga: labai geros būklės (naudotas), 21 spindles left/right spindles table dimensions: 840x440mm 2 pneumatic clamps spindle pitch: 32mm pedal control pneumatic unit adjustment power supply: 380V Bdjdew Adygopfx Admsk

Sąlyga: naujas, Drilling capacity in steel (diameter): 25 mm Throat depth: 170 mm Drilling stroke: 50 mm Slotting cutter capacity: 16 mm Spindle taper: MT 3 Spindle speeds: 50 - 3000 rpm Transverse table travel: 280 mm Longitudinal table travel: 155 mm Table clamping surface: 500 x 180 mm Connection voltage: 230 V Max. distance between worktable and spindle nose: max. 320 mm Total power requirement: 0.8 kW Machine weight: approx. 150 kg Space requirement: approx. 670 x 550 x 910 mm Drill-milling machines: - digital depth and speed display - 2-speed gearbox - with fine adjustment and variable speed - including left/right switch - head swivels left and right Bsdovdldwopfx Admsdk Delivered with corresponding tools

Sąlyga: naujas, MAIN FEATURES OF THE MACHINE: - Single-head drilling machine for drilling within a range of 0° - 90° - Drilling head tilt angle adjustable pneumatically - Possibility of setting the side fences with 0.1 mm accuracy - Safety clamps allow fast panel positioning without adjustment - Patented pneumatic material clamps - Cast iron head ensures vibration damping - Work table made of MDF - Quick and precise adjustment Bedpfx Aeh Dzr Aodmedk - High-precision drilling - Quick drill bit change via quick couplings - Spiral System – device for rapid drilling depth adjustment Technical Data: Number of spindles: 29 Distance between first and last drill: 896 mm Distance between spindle centers: 32 mm Number of pneumatic clamps: 2 Max. workpiece size: 1142 x 3000 mm Max. workpiece thickness: 70 mm Operating pressure: 6 - 7 bar Noise level: 76.1 dB Air consumption: 10 l/cycle Motor power: 1.5 kW Speed: 2800 rpm Overall dimensions: Length: 1507 mm Width: 960 mm Height: 1265 mm

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1976, mašinos/transporto priemonės numeris: 1299, Marke: Weeke Modell: PE 75 Baujahr: 1976 Bdsdpfx Asu Nwzcsdmjk Motor: 7,5 kW, 50 Hz, 380V, 3-phasig Lagernummer: 10316

Sąlyga: naudotas, Universal Tool Milling Machine DECKEL Type FP 1 Machine no. 28317 Year of manufacture: ca. 1960 Travel (X/Y/Z): 245 / 150 / 340 mm Table size: 600 x 210 mm Horizontal spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor output: 0.8 and 1.1 kW (pole-changeable) Electrical connection: 380 V, 50 Hz - Spindle speed via 2 motor speeds and 6 gear stages - Power feed in X and Z axes - Coolant system with mechanical pump integrated in machine base - Quill movement at vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Sheet metal base frame with angle iron and machine feet Required space (L x W x H): 1100 x 900 x 1650 mm Bdodpfx Aoiy Ekvsdmek Weight: 650 kg Good condition

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2023, Ši VITAP BLITZ 2.0 daugiavretenė gręžimo staklė pagaminta 2023 m. Ji turi gręžimo galvą, dirbančią 3500 aps./min., tris nepriklausomus horizontalius ir vertikalius velenus, klijų ir kaiščių įterpimo modulį. Staklė įrengta su 19" LCD TFT monitoriumi, Windows kompiuterine sistema ir Albatros TPA programine įranga. Puikiai tinka "JUST IN TIME" arba masinei gamybai. Susisiekite su mumis dėl daugiau informacijos apie šias stakles. Taikymo sritys Bdodoxb E Imjpfx Admsk Gręžimas ir frezavimas (mediena)

Sąlyga: geras (naudotas), 23 spindles left/right spindles spindle pitch 32 mm 2 pneumatic clamps pneumatic aggregate adjustment foot pedal control table width 1000 mm weight 506 kg Bdedpjw Adw Eefx Admek power supply 380V

Sąlyga: naujas, Drilling capacity in steel (diameter): 16 mm Throat depth: 170 mm Drilling stroke: 50 mm Slot milling capacity: 16 mm Spindle taper: MK2 Spindle speeds: 50 - 2250 rpm Cross table travel: 320 mm Longitudinal table travel: 145 mm Table clamping surface: 500 x 140 mm Connected load: 230 V Total power requirement: 0.5 kW Machine weight approx.: 90 kg Required space approx.: 0.5 x 0.45 x 0.84 m Drilling and milling machine with: - Variable spindle speed - Digital depth display - Left/right rotation switch Bsdpfx Adeupxmrsmsdk - Compound table - Pivoting spindle head - Manual feed via handwheel - Tool case with contents But without digital readout! Additional price for 3-axis digital readout: 499 EUR

Sąlyga: naudotas, Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07-16 1990, X ašies eiga: 2 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 800 mm, Parduodama geros būklės mašina, kaip matyti nuotraukose, pagaminta 1990 m., su NCT 90 valdymu. Naudota labai mažai, parduodama dėl neišnaudojimo. Bendras mašinos svoris – 33 tonos. Mašina visiškai veikianti. Išardymas ir transportavimas yra pirkėjo atsakomybė. Bsdpfx Ajw Sx Agedmsdk

Sąlyga: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 185078, Offer 24435 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel X / Y: 1300 x 500 mm - Drill press manufacturer: MAXION, Model: BT 15 GL - Drilling capacity up to: 18 mm - Thread cutting capacity up to: M10 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - 4 spindle speeds: 320, 560, 1000, 1600 rpm - Motorized stroke of the drilling unit - Table clamping X + Y Bdjdpfx Ajut Uzajdmek - Minimum quantity lubrication - Pneumatic connection: 6 bar - Power supply: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg - Various guide bushings

Sąlyga: naudotas, 4-axis CNC drilling and milling machine IXION Type 30 CNC W Machining Center (VMC, BAZ) Year of manufacture: approx. 1997, machine overhauled in 2020 Travel (X/Y/Z): 600 mm / 350 mm / 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load: 300 kg Spindle taper: SK 40 (pull stud DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X/Y/Z: 0 - 5000 mm/min, stepless Bdodju Tln Nspfx Admjk Rapid traverse X/Y/Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip tool change time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Thread cutting capacity in St 60: M24 Spindle drive power: 5 kW (10kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - electronic handwheel - RS-232 interface - 12-station tool changer - hydro-mechanical tool clamping - Rotary axis as dividing unit on table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm, speed approx. 25 rpm, ratio 1:180 - Machine enclosure lighting via 2x halogen lamps - Chip conveyor with coolant pump - Control cabinet fixed to machine Transport dimensions: L 320 cm x W 230 cm x H 300 cm Machine footprint including chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3100 kg Chip conveyor weight: approx. 200 kg Good condition

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), X ašis: 500 mm, Y ašis: 230 mm, Z ašis: 90 mm. Jokių žinomų defektų, reguliariai prižiūrėta, be priedų ar atsarginių dalių. Mašina jau išmontuota. Apžiūra vietoje galima, nenaudojama su elektra. Bsdpfxjw U Dwhe Admsdk

Sąlyga: labai geros būklės (naudotas), 29 spindles left/right spindles spindle spacing 32mm vertical or horizontal drilling manual adjustment of the unit drilling depth adjustment pneumatic clamps Bdsdpfxsw Advzo Admok pneumatic head movement

Sąlyga: naujas, Drilling capacity in steel (diameter): 16 mm Bodpfoupxcysx Admsdk Throat depth: 180 mm Drilling stroke: 85 mm Spindle taper: MT 2 Spindle diameter: 47 mm Spindle speeds: 320 - 3300 rpm Table adjustment (cross): 230 mm Table adjustment (longitudinal): 100 mm Clamping surface on table: 420 x 155 mm Supply voltage: 230 V Maximum package size: 900 x 600 x 300 cm Total power requirement: 0.75 kW Machine weight approx.: 80 kg Dimensions (L x W x H): 0.7 x 0.7 x 0.8 m Drilling and milling machine equipped with: - Cross slide - Manual handwheel feed - Chip guard - 16 mm drill chuck - Mechanical MT tool clamping

Sąlyga: naujas, Drilling capacity in steel (diameter): 25 mm Throat depth: 175 mm Drilling stroke: 50 mm Slotting cutter capacity: 16 mm Spindle taper: MT 3 Spindle speeds: 50 – 3000 rpm Table traverse (cross): 380 mm Table traverse (longitudinal): 175 mm Clamping surface (table): 700 x 180 mm Supply voltage: 230 V Max. distance between worktable and spindle nose: max. 320 mm Total power requirement: 0.75 kW Machine weight: approx. 150 kg Space requirement: approx. 670 x 550 x 910 mm Drilling and milling machine with large table SINO 3-axis digital readout Bdodoupxtfepfx Admsk Quill travel digital indicator 2 speed ranges Left/right rotation switch Head can swivel 90° left/right Spindle guard Incl. toolbox with various tools

Sąlyga: naujas, Drilling capacity in steel (diameter): 30 mm Throat: 200 mm Drilling stroke: 70 mm Slot milling capacity: 16 mm Spindle taper: MK3 Spindle speeds: 50 - 3000 rpm Table travel (cross): 565 mm Table travel (longitudinal): 220 mm Bdjdpjupxt Esfx Admek Table clamping surface: 840 x 210 mm Supply voltage: 400 V Max. distance between work table and spindle nose: max. 470 mm Total power requirement: 1.1 kW Machine weight: approx. 230 kg Space requirement: approx. 0.75 x 1.05 x 1.3 m Drilling and milling machine with large table SINO 3-axis digital display Quill stroke digital readout 2 speed ranges Left/right rotation switch Head swivels left/right 90° Mounting: MC 3 - B16 Drill chuck: 3 - 16 mm Spindle guard Machine base optional (€199) Includes toolbox with various tools

Sąlyga: naudotas, Drilling capacity in steel (diameter): 35 mm Throat depth: 300 mm Drilling stroke: 160 mm Table clamping surface: 610 x 250 mm Max. spindle speed: 1,500 rpm Feed rate: 0.05 - 0.1 - 0.2 mm/rev Bjdpfxewu Hhws Admodk Tool holder: MT 4 X-axis travel: 530 mm Y-axis travel: 240 mm Total power requirement: 1.5 kW Machine weight approx.: 0.6 t Dimensions (L x W x H): 1.2 x 0.8 x 2.0 m Drilling machine with: - Power feed - Tapping device - Machine lamp

Sąlyga: naujas, Drilling capacity in steel (diameter): 35 mm Throat depth: 230 mm Drilling stroke: 125 mm Bsdpfxeu Imkds Admodk Spindle mount: ISO 40 Spindle speeds: 115 - 1750 rpm Table traverse (cross): 560 mm Table traverse (longitudinal): 175 mm Table clamping surface: 1000 x 240 mm Max. distance between worktable and spindle nose: 375 mm Connection voltage: 400 V Total power requirement: 0.85/1.5 kW Machine weight approx.: 0.95 t Required space (L x W x H): approx. 1.3 x 1.2 x 2.1 m Equipment: - 3-axis digital readout - Digital depth display - Motorized feed for X and Y - Left/right rotation - Emergency stop - Tilting drill head - Spindle guard - Machine lamp - Toolbox with contents

Sąlyga: naujas, Drilling capacity in steel (diameter): 16 mm Throat depth: 185 mm Quill stroke: 50 mm End mill capacity: 20 mm Spindle taper: MT 2 Spindle diameter: mm Spindle speeds: 100–1500 / 200–3000 rpm Table traverse (cross): 175 mm Table traverse (longitudinal): 280 mm Table clamping surface: 500 x 180 mm Supply voltage: 230 V Total power requirement: 0.85 kW Machine weight: approx. 0.12 t Space requirements: approx. 0.86 x 0.6 x 0.9 m Bdedpfourznwex Admsk Drilling and milling machine with: - Variable spindle speed - Cross slide - Spindle head swivels left/right 90° - Feed via handwheel

Sąlyga: naudotas, Gamybos metai: 1985, x-eiga 400 mm y-eiga 180 mm Bsdpfxsw Tdwre Admjdk z-eiga 300 mm Stalo dydis 760 x 200 mm Veleno tvirtinimas ISO MK 3 Veleno sūkių diapazonas 40 - 1800 aps./min. Pinolės eiga 80 mm Bendras galios poreikis 1,2 kW Staklių svoris apie 0,38 t Matmenys I x P x A 1,75 x 1,65 x 1,9 m Gręžimo ir frezavimo staklės - X ašis be veleno - Centrinis tepimas

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Throat: 275 mm Drill stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table travel (cross): 190 mm Table travel (longitudinal): 490 mm Table clamping surface: 730 x 210 mm Connection voltage: 400 V Bodeupw T Depfx Admedk Drilling feeds: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Drilling/milling machine with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides • Quill feed • Gearbox

Sąlyga: naujas, Drilling capacity in steel (diameter): 45 mm Quill stroke: 125 mm Table traverse (cross): 560 mm Bdedpfx Adjupxrnemok Table traverse (longitudinal): 230 mm Table clamping surface: 800 x 240 mm Spindle speeds: 75 – 3200 rpm Max. milling cutter diameter: 80 mm Spindle taper: ISO 30 Max. distance between worktable and spindle nose: 460 mm Throat: 230 mm Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight approx.: 580 kg Space requirements approx.: 1.2 x 1.0 x 2.1 m Equipment: All axes with 3-axis digital readout. Quill travel features a separate digital display. Automatic feed on the X-axis and quill. Motorized Z-axis. Tapping device. Coolant system. Machine base frame. Collet set, SK tool holder. Additional machine accessories in a box.

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 – 3200 rpm Table cross travel: 190 mm Table longitudinal travel: 490 mm Table clamping surface: 700 x 210 mm Connection voltage: 400 V Maximum milling cutter diameter: 80 mm Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Bdodpfeupw Uzox Admek Drill/milling machine equipped with: • Thread cutting device • Cross table with adjustable guides • Quill feed • Gearbox • SK 40 spindle taper