Medžio Graviravimas Mašina pirkti naudotą (40 040)

Būklė: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, bendras plotis: 700 mm, bendras aukštis: 1 500 mm, bendras ilgis: 800 mm, bendras svoris: 700 kg, TRUMPF LASERSIGN PL 2 lazerinė graviravimo mašina - Darbinė įtampa: 100 - 240 V - Dažnis: 50/60 Hz - Nominali srovė: 7 A - Prijungimo galia: 600 W - Vidiniai matmenys: 400 x 300 mm Guedpfxeym Rx Ns Af Doa - Stalo matmenys: 330 x 270 mm - su 6 grioveliais - įskaitant TBH gamintojo lazerio šaltinį Dėmesio: Prekę būtina atsiimti susitarus dėl tikslios datos laikotarpyje nuo 2026-04-21 iki 2026-04-30. FCA D-96257 Marktgraitz – pakrauta į sunkvežimį

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Laser Marking System Manufacturer: Baublys Model: BL 150 S/NC 500 Year of Manufacture: 2001 Guodpfx Aeq Abnnsf Dea Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Year: 2001 Laser Power: 150 Watt Laser Type: Q-switched solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 – 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad TEM00 Pulse Duration: CW / 90 ns Max. Output Power: 65 W multimode 16 W single mode Pulse Energy: 16 mJ at 3 kHz Beam Deflection System: Galvanometer system Line Width in Mixed Mode: approx. 0.12 mm Deflection Speed: 3 m/s; equivalent to 200 characters/sec at 1.5 mm height using a single-line font Dimensions: approx. Weight: approx. Power Supply Voltage: 400 V, three-phase AC, 50 Hz, 3 phases, clockwise rotating field Connection: 5-pin CEE plug, 16 A, 6h Max. Power Consumption: 8.5 kW, max. 16 A per phase Fuse Protection: 3 x 16 A slow-blow Water Supply Cooling Water Flow Rate: 7.5 l/min at 20°C supply temperature Discharge Connection: G 3/4" male thread Dissipated Heat Load: approx. 6.5 kW Max. Cooling Water Temp at Inlet: 20°C Water Consumption: depends on inlet temperature Outlet Temperature:

Gamybos metai: 1985, būklė: naudotas, 1 used engraving machine Manufacturer: KUHLMANN Model: GM I-I Working area: 320 x 200 x 280 mm Template table: 500 x 400 mm Work table: 500 x 200 mm 3D form engraving device TGV disc engraving device Various templates and type sets Various engraving cutters Speed range: 4,200 – 20,000 rpm Guodpjk Tt Axjfx Af Dsa Required space: approx. 1.2 x 1 x 1.5 m Weight: approx. 250 kg

Būklė: labai geros būklės (naudotas), For sale: a classic, proven Gravograph IM3 mechanical engraver – ideal for nameplates, tags, industrial markings, or jewelry. • Model: Gravograph IM3 • Manufacturer: GRAVOGRAPH GMBH, Umkirch (Germany) • Fully functional motor, clean guides • Complete set of fonts and symbols included • Stable cast construction • Precise pantograph control Gsdpfx Afjun U Uco Doua • Solid worktable with linear guidance Used condition, technically fully operational. Suitable for both workshop use and decorative or advertising purposes.

Būklė: geras (naudotas), Gamybos metai: 1969, Work Table Clamping Surface 500 x 200 mm Distance Spindle – Work Table 300 mm Longitudinal Table Travel (manual) 300 mm Cross Table Travel (manual) 160 mm Template Table Template Table 550 x 324 mm Distance Pantograph Arm – Clamping Surface 20 mm Rotatable 360° Template Grooves 7 pcs, spacing 45 mm Milling Spindle Spindle Speeds 1,900 – 15,000 rpm Cutting Speed 1 – 226 m/min Motor Speed 2,800 rpm Taper of Engraving Spindle 1:5 Max. Collet Bore 6 mm Spindle Adjustment 1 mm fine, 3 mm coarse Pantograph Gusdpfeidckfjx Af Dsa Transmission Ratio 1 : 1 up to 1 : 50 Drive Power 0.2 kW Dimensions Required Space L x W x H 1,400 x 1,000 x 1,420 mm Weight 260 kg Accessories / Special Features: • 1 set of letter and number templates • Tracing stylus

Gamybos metai: 2001, būklė: naudotas, Techninės detalės: x eiga: 400 mm Guedjikbtnspfx Af Dea y eiga: 300 mm z eiga: 500 mm Stalo tvirtinimo paviršius: 400 x 300 mm Stalo apkrova: 50 kg Valdymas – pusiau automatinis: LASERSOFT 3D Lazerio galia: 100 W Bendras energijos poreikis: 27 kVA Staklių svoris apytiksliai: 2,5 t Užimama erdvė apytiksliai: 3 x 3,5 x 2,8 m CNC graviravimo/ženklinimo/kontūro lazerinė staklė Apytiksliai 9 000 įjungimo valandų, apie 5 500 darbo valandų

Būklė: labai geros būklės (naudotas), Parduodu beveik naują ELIET vejų sėjimo / sėjimo mašiną, modelis GZC 750. Darbo valandų: 50,0. Svoris: 252 kg. 6,5 AG, hidrostatinė pavara ir vairuojantys grotelių volai. Sėklų dėžės talpa 61 l. Sėklų kiekis dozuojamas, sėklų dėžė nuimama, intuityviai reguliuojama rankena, 75 cm darbinis plotis, 2 grotelių volai, tinkama naudoti šlaituose. Lyginimo akėtėlės po sėklų dėže centre. Lyginimas, sėjimas ir suspaudimas vienu darbo žingsniu. Kaina be PVM. Guedpfx Aoywnn Ref Dja

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, lazerio galia: 20 W, 19" Installation System – Model 2025 – The marking champion among laser engravers! Laser Class 4 Metals – Plastics – and much more! • EZCAD 3 (true 64-bit card) with up to 4 axes • Integrated Intel i5 or AMD Ryzen, 32GB RAM, and ultra-fast M.2 SSD built into the 19" rack-mount chassis • 23" TFT display for fatigue-free operation • Windows 11 Professional 64-bit pre-installed • Professional MOPA fiber laser source JPT with 20 watts power and up to 600 kHz (optional variable pulse width and up to 200W power for color marking and cleaning) • "DigiScan Eco 10" scan unit for detail fidelity and precision • Scan area approx. 100 x 100 mm (optional: 150/200/300 mm) • 19” aluminum rack housing • 2m fiber cable incl. laser head holder for easy installation • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel files, network, or database! • Laser parameter finder via matrix for 2 parameters (e.g., frequency to speed, frequency to power) • TCP/IP connectivity: Various commands can now be transferred to the software via TCP protocol, enabling easy integration of external components such as camera position detection • Industry 4.0 ready: Machine status can be processed at any time via TCP/IP protocol • Optocoupler-isolated inputs and outputs for automation (24V PNP logic) • New look & feel: Fresh design for even more intuitive and user-friendly operation • 3D preview for rotary axis processing • Performance boost up to 50% through 64-bit technology • Enhanced stability thanks to latest drivers • Optionally control up to 4 axes without switching via PLUGINs • DEEP engraving function (slicer software for controlling Z-axis) • New, optimized hatching algorithms for highly efficient marking • New generation galvanometer (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus check • Connection port for external fume extraction • Start button and emergency stop on the housing, as well as external connections for X, Y, Z, and A axes • Operating manual and user software in German Optional accessories include: → Enclosure for Laser Class 1, available as tabletop or floor-standing model with casters and space for extraction system → IPG or SPI fiber laser sources in various power ratings → LED status bar (green/yellow/red) → Scanlab equipment Gsdouxnwmepfx Af Doua → Suitable extraction systems → Automation for loading, conveyors, and much more! → 3D marking and engraving functionality → Automatic focus adjustment via specialized laser sensor → Rotary units in various designs → Motorized slides in X and Y directions → Interlock system for marking without a protective housing, using only PPE (personal protective equipment) – suitable for bulky parts Including training at our training center in Schweinfurt! Our engraving lasers are manufactured at our plant in Schweinfurt! This means we can accommodate individual requirements at any time! → Made in Schweinfurt! Pictures may show optional extras! We are your partner for laser engraving machines and laser marking systems. Whether manual or fully automated laser marking solutions – we are happy to provide you with a custom quotation.

Būklė: geras (naudotas),

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GE-50RAY, įėjimo įtampa: 230 V, įvesties srovės tipas: Nuolatinė srovė, lazerio galia: 50 W, aušinimo tipas: oras, bendras plotis: 530 mm, bendras aukštis: 770 mm, bendras ilgis: 796 mm, bendras svoris: 254 kg, garantijos trukmė: 36 mėnesiai, aukščio reguliavimo tipas: elektrinis, durų angos plotis: 530 mm, durų angos aukštis: 300 mm, stalo ilgis: 203 mm, stalo plotis: 430 mm, lazerio bangos ilgis: 1 064 nm, įėjimo dažnis: 100 Hz, Įranga: kabina, Take advantage of this opportunity and secure your 50 watt, 100 watt, or 200 watt fiber laser! For more information or a custom quote, we are happy to assist you. Contact us today to learn more about the advantages of these outstanding products. We offer brand-new fiber lasers with German user software and operating manual. These machines are easy to use without programming knowledge and are ready for immediate operation. Our services include: - Personal delivery and installation - Setup and instruction on-site or via remote connection - Ongoing support for any questions or issues - Service and spare parts directly from Germany Technical details (depending on model): - Laser power: 50 watt, 100 watt, or 200 watt - Wavelength: 1064 nm - Frequency range: 20-100 Hz - Marking field size: 150x150 mm (Options: 50, 70, 110 mm head) - Repeat accuracy: ±0.003 mm - Engraving speed: ≤ 7000 mm/s - Marking software: EZCAD in German / English - Pilot laser: Easy preview - Laser class: 1 - Operating temperature: 14-30 ℃ - Focusing: Electric lifting column with motor control - Max. workpiece height: approx. 300 mm - Connection: 230V - Cooling: Air-cooled - Weight: approx. 170 kg (depending on model) - Operating costs: Low - Service life: Over 100,000 operating hours maintenance-free - Features: Grid bores for fixtures - Material versatility: Capable of marking a wide variety of materials Included: - 150x150 mm head, other sizes available - CE declaration of conformity - Warranty Gedpfx Aeu Tkclsf Doua - Service - German software - Training for machines and software - Invoice Scope of delivery: - USB cable - Power cable - Stops - USB stick with parameters - Operating manual in German - Foot pedal - Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engravings. Our fiber lasers are ideal for engraving and annealing metals as well as marking or decorating plastics and coated materials. Software: - EZCad 2.14.0 in German - Compatible file types: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We handle service ourselves and maintain the largest stock of spare parts directly in Germany, ensuring fast and efficient support. Shipping and Installation: For shipping we connect the machine via remote connection, set it up, and provide brief instruction. Alternatively, we can deliver in person, install, set up, and instruct you onsite. Price will be agreed upon based on postal code. Consultation: For detailed advice, visit our website or call us directly. We are happy to answer all your questions. Additional options: Upon request, models with 100 watt and 200 watt are also available—ideal for larger projects or increased performance and speed requirements!

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, lazerio galia: 30 W, aušinimo tipas: oras, bendras svoris: 45 kg, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, lazerio bangos ilgis: 1 064 nm, The LAS 22 is a compact desktop unit with a small working area, ideally suited for marking small parts. Due to its compact design, the system is highly practical and can be used virtually anywhere. The universally deployable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with either a 20-watt or 30-watt fiber laser. The use of lasers for permanent markings is essential in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without requiring extensive programming knowledge. Serial and item numbers are automatically incremented by the software following a prior setup. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. Use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Guedpfx Afjuy H Nqo Dja - 30 Watt fiber laser (optional: 20 Watt) - Laser class 1 - Wavelength 1064 nm - Marking area size 110 x 110 mm - EZCAD marking software in German / English - Pilot laser (simple preview, contour preview) - Focus finder (easy focusing) - Max. part height approx. 95 mm - Grid holes for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electrically operated door with clamp protection stop - Optional: exhaust system (including activated carbon filter) - Welded steel sheet construction - 230V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Būklė: naudotas, Gamybos metai: 2005, Žymėjimo laukas 120 x 120 mm Stalo dydis 250 x 250 mm Maks. ruošinio svoris 50 kg Valdymas Fobagraf Gedpfsylcqhsx Af Doua Mašinos svoris apie 1000 kg Mašinos rėmas iš suvirintos plieno konstrukcijos Kryžminis stumdukas – kietakmenio versija, stalo plokštė su plieno atraminiais strypais Aukščio reguliuojama lazerio galvutė Kokybiškai valdomas ND:YAG lazerio galvutė, lempa pumpuojama, 100 W Nukreipimo blokas sumontuotas ant lazerio galvutės (su standartiniu objektyvu) Z ašis su pavaromis ir servovarikliu Servo ašių valdymas X, Y ir Z ašims Vandeniu aušinama Valdymas: naudotojo programinės įrangos paketas Fobagraf Operacinė sistema: Windows 2000 Įjungimo valandos: 17 388 val. Naudojimo instrukcija prieinama

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14466, bendras plotis: 350 mm, bendras aukštis: 700 mm, bendras ilgis: 550 mm, bendras svoris: 80 kg, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Pasiūlymo pateikimas įpareigoja laiku atsiimti įrangą – arba 2026-05-11–2026-05-13, arba 2026-05-18–2026-05-21 laikotarpiu! MAŠINOS DUOMENYS Įtampa: 100–240 V Dažnis: 50/60 Hz Galia: 800 W Guodpfeym Dh Rox Af Dja Matmenys ir svoris Matmenys (I x P x A): 550 x 350 x 700 mm Svoris: 80 kg Išorinė nuoroda: CES – Lotas 15

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, bendras svoris: 122 kg, LASER IN EXCELLENT CONDITION, USED ONLY FOR TESTS AND DEMOS Laser cutting and engraving machine for the signage and promotional marketing industry – made in USA ▪ CO2 laser tube in sealed metal housing, 25 KW power, Air-cooled, Wavelength: 10,640 nm, Approximate lifespan: 30,000 working hours. ▪ The source can be replaced quickly with the ‘Quick-Change’ system, without technician intervention and without the need to realign the laser beam. Universal manufactures only sealed RF-Excited CO2 laser sources, which provide constant power and require no maintenance. ▪ Maximum material dimensions: 737 x 584 x 229 mm, but larger materials can be processed due to the open-front design ▪ Working area: 610 x 457 mm ▪ Honeycomb cutting table - minimizes contact between the material and the reflective engraving table, and efficiently removes particles and fumes generated during cutting ▪ Maximum material weight: 18 kg ▪ Machine dimensions: 914 x 965 x 914 mm ▪ Power supply: 220 – 240V / 5A The package includes the following options: ▪ BOFA filter with 400 m³/h air flow – allows use even in enclosed commercial spaces ▪ 2.0” focal distance focusing lens (5.08 cm) with a 0.125 mm spot diameter ▪ HPDFO focusing lens + beam collimator. Focal distance: 2.0” (5.08 cm), Spot diameter: 0.025 mm – suitable for metal marking ▪ Rotary attachment included – maximum turnable object diameter: 203 mm ▪ “Air-Assist” cooling and cleaning system – provides a clean air jet over the material surface to suppress flames and improve engraving/cutting quality. Also helps clean optical components (mirrors + lens) ▪ Metallic air cone for 90-degree airflow direction onto the material ▪ Back-Sweep – hose for air direction at 45 degrees onto the material ▪ 2 bar pressure compressor – PICCOLINO brand, supplies clean air for the “Air-Assist” system ▪ ‘Laser Interface+’ operation software – user interface that enables automatic or manual control over power, travel speed, laser pulses (PPI), and other system settings. Includes a material database with predefined settings depending on the processed material – simply select the material type from the list and the driver loads the optimal settings for cutting/engraving. Settings for custom materials can also be saved, stored, and loaded. For maximum process efficiency, the interface can estimate the remaining time until engraving or cutting completion. ▪ 1Touch Laser Photo additional software – for highly detailed engravings, including complex image engraving. Godpsytdtyefx Af Dsua

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 355 mm, įėjimo įtampa: 230 V, lazerio galia: 20 W, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Demonstration unit with minimal operating hours (approx. 15 hours) - incl. Windows 64-bit PC system - incl. 22" monitor - all software pre-installed and calibrated - Engraving software in German - 3D software (MM3D) - very user-friendly operation - ready to use: switch on and start - UV laser source, 20 watts, for high-contrast, fast marking at extremely high resolution - engraves practically all metals (stainless steel, brass, aluminum, etc.) - engraves practically all plastics (incl. PVC, silicone, etc.) - engraves genuine glass (including crystal glass) - ability to cut genuine glass - heavy-duty industrial quality - complete system / ready for immediate use - work area approx. 500 x 600 x 600 mm (WxHxD) - clamping table with 50 mm grid threaded inserts - LED work area lighting Gusdpfx Asflrnaof Dea - 50 mm connection port for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (selectable) - 3D scanner for marking arbitrarily shaped surfaces - incl. foot switch to start engraving process Sale is exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Please also inquire about our attractive leasing/financing offers. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 1 070 mm, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 30 W, aušinimo tipas: oras, garantijos trukmė: 12 mėnesiai, lazerio bangos ilgis: 1 070 nm, Įranga: kabina, Laser engraving machine with 30-watt laser power - Demonstration unit (approx. 10 hours) - Worth a look - Incl. Windows PC 64bit (incl. monitor/keyboard/mouse) - Fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start immediately - Fiber laser source with 30 watts for high-contrast and fast marking with very high resolution (see photos) - Wobble function, e.g. for cleaning metal components - Deep engraving up to 3mm possible - For engraving on many metals (stainless steel, brass, aluminum, etc.) and numerous plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 390 x 270 x 350mm (LxWxH) - Mounting area with threaded holes in a 50mm grid - LED workspace lighting - 50mm pipe connection for fume extraction - Engraving area up to 170 x 170mm - Motorized focus adjustment - Incl. footswitch for starting the engraving process Gedpfxod Ha I So Af Deua Please also take note of our attractive leasing and hire-purchase offers. Sale is exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 450mm Height: 800mm Depth: 750mm Weight: approx. 80kg

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), We offer a complete laser marking system: - DOMINO DSL1 laser - Class 1 protection cabin - Rotary axis Gusdpod N Hguefx Af Dja - Conveyor belt - Computer Laser power: 10 W Laser type: Enclosed CO2 laser, 30,000 hours mean time between failures Characters per second: 400 (depending on product material and system configuration) Character height: 0.5 - 120 mm (0.02 - 119.89 mm) Focal length: 100 mm (208 mm optional) Marking area: 60 x 60 mm Fonts: Pseudo-True Type Laser head: Stainless steel and aluminium construction Operating temperature: 15 - 38°C Cooling: Air The following materials can be marked with a CO2 laser: - Painted or coated metals - Glass - Ceramics - Cardboard - Various types of plastics

Būklė: naudotas, Gamybos metai: 1996, Technical Details: Gujdpfx Afeu Nu Ugo Dsa X travel: 100 mm y travel: 100 mm z travel: 300 mm Table size: 350 x 300 mm Air pressure: 6 bar Operating voltage: 220 / 240 V Approx. machine weight: 40 kg Dimensions: L:475 x W:300 x H:700 mm Suitable for engraving and/or marking work on parts with flat as well as curved surfaces. Manual height adjustment with handwheel, digital display With control unit Technifor UC200; size 420x290x100 mm (external control signal) Foot pedal XPE-M Inspection plate/table size: 350x300 mm, cast steel (minor scratches) Pneumatic connections Note: The processing head (engraving unit) is not included in the scope of delivery. Sale at our fixed price as is.

Būklė: geras (naudotas), Gamybos metai: 1980, Graviravimo ir kopijavimo frezavimo staklės Gamintojas: DECKEL Tipas: GK 21 Metai: apie 1980 Maks. frezos diametras: 10 mm Godpfxjvk D A Eo Af Dsua Veleno apsisukimai: 475 - 20 000 aps./min. Eigos: 160 mm Y, 300 mm Z, 365 mm Stalas: 200 mm X 360 mm Staklių spinta su daugybe priedų ir staklių dokumentacija prieinama. Svoris: 620 kg.

Būklė: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 303211, bendras svoris: 52 kg, Pilna sistema, stalinės įrangos įrenginys ant pagrindo, komplekte su veržtuvu, verpstės pavara per tylų nuolatinės srovės variklį. Įranga sujungta su staklių rėmu didelių ruošinių laikymui, reguliuojamas aukštis, galima pasvirti. Integruota graviravimo programa, monitorius, klaviatūra, šriftas, saugojimas diskelyje. - Gamybos metai: 2001 - Pilnai veikiantis, prijungtas prie elektros, paruoštas demonstracijai Godpfsxni Spsx Af Doua - Su atvyniojimo įrenginiu UNICA - Pirograviravimo įrenginys IS 200/UNICA su verpste ir transformatoriumi - Pirotransformatorius - Frezų stovas - Darbinis paviršius 225 x 80 mm - Z eiga 15 mm (po verpste 210 mm) - Verpstės variklis 20 W - Verpstės apsisukimai 17 000 aps./min - Matmenys 560 x 575 x 560 mm - Svoris 52 kg - Mašinos Nr. 303211

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel range X/Y/Z: 500mm/430mm/350mm, marking area X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation is available. On-site inspection is possible. Gjdpfx Aov Rfqqof Dsua

Būklė: naujas, Gamybos metai: 2025, If you're looking for a true industrial machine and not a toy, you've come to the right place: Guedpfjcuiz Tex Af Dsa Film Labeler – Label Printer – Nameplate Machine (* Pricing depends on configuration and laser power; this is a brand new laser machine manufactured by us) Laser Marker skyLASER Mark 500 – 2D Fiber Laser Engraver / Marking Laser is the complete solution for your complex laser engraving applications. Important: Compare the installed components of the laser systems on offer: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, cables – all components exclusively from German production! These laser systems are 100% manufactured in our factory in Plauen, according to customer requirements. Competitors often use Chinese components (it starts with the controller: EZCAD has Chinese origins!). (* The listed price may vary depending on configuration; images show various equipment variants; you will receive a factory-new laser system manufactured by us.) Our skyLASER Mark systems are used exactly where conventional CO2 laser technology reaches its limits. With the fiber laser at a wavelength of 1064 nm, even the most delicate structures can be achieved on almost any material. Unlike conventional milling, laser processing is contact-free, force-free, and without tool wear. This yields geometric flexibility and a high degree of processing precision for your application. This processing method can be applied regardless of the hardness of the workpiece. The customizable and mobile worktable increases the system’s flexibility. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLASER Mark achieves extremely precise, durable marks (laser engravings) and is ideal for metals and certain organic materials. A wide variety of fonts, barcodes, serial numbers, logos, and images can be applied effortlessly. The excellent resolution ensures virtually all marking requirements can be met. The system is suitable for producing embossing dies, engravings, labels, and complex fine structures. The software is extremely user-friendly. Even highly complex marking tasks can be easily created on the included industrial PC. Exact positioning is quick and simple, thanks to the optional monitoring camera for process observation and software-assisted workpiece alignment. As the system has virtually no wear parts and, thanks to IPG laser technology, is almost maintenance-free, it is particularly suited for industrial applications and continuous operation. skyLASER Mark Marking Laser / Engraving Laser – Key Features: - Working area: from 110 x 110 mm, 120 x 120 mm, or 300 x 300 mm (F-Theta lenses depending / 3D option) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB galvanometer scanner - Nominal laser power: 20W - New, optional: software-controlled, variable working width (X-axis max. 450 mm, depending on configuration)

Būklė: naujas, Gamybos metai: 2025, skyCUBE M Laser Processing Center – The new benchmark in laser material processing! PFEIFER Laser Processing Center skyCube M Laser machine with 200W CO2 laser Gedps Sfansfx Af Djua Immediately available Mclass = Working area X 1250 x Y 650 x Z 300 mm skyCUBE M Laser Processing Center – the new Mclass multifunctional laser engraving and cutting machine. Easy and high-precision laser processing – High-speed, high-quality laser engraving and cutting. Our newest and most advanced multi-functional solution impresses even the most experienced users with its completely redesigned construction. This CO2/Fiber laser demonstrates outstanding performance in all industrial applications, whether used as a CO2 or Fiber engraving laser or as a CO2 or Fiber cutting laser. With optional laser power up to 1000W (1kW), this CO2 laser device/fiber laser system offers maximum flexibility for your production requirements. skyCUBE laser devices comply with all Class 1 requirements according to DIN EN 60825-1, ensuring the highest safety standards. Depending on the installed and selected laser power, this CO2/Fiber laser is ideal for cutting and engraving a wide range of materials, including various metals, acrylic, solid wood & engineered wood, composite woods, paper, cardboard, various plastics & foams, textiles, and much more. The excellent build quality of these laser machines – 100% manufactured in Plauen – ensures a high degree of working precision and consistently high quality from the metal frame down to the laser source. With cutting speeds of up to 8000 mm/s and engraving speeds up to 4000 mm/s, the advanced laser technology produces clean, sharp cut edges and precise laser engravings. Its ergonomic design, featuring a pull-out worktable, makes loading and unloading the machine easy. A drawer in the lower part of the machine collects cut materials for convenient handling. User-friendly and intuitive – supplied with the skyCUBE PC software (ready for Windows®). The simple, practical interface, tailored for Windows standards, ensures efficient operation. High system stability, professional monitoring with machine operation and control, and compatibility with standard file formats are some of the software’s key features. Data output is handled via layers – with separate configurations for each layer, including sequence definition and processing type. Parameters like laser power and processing speed are automatically saved for each layer and are reproducible at any time via a material database. Laser projects are transferred to the skyCUBE M laser processing center via a LAN/USB connected PC and can then be repeatedly executed without the PC needing to remain switched on. A modern touch control panel provides full access to all system information and functions. Summary of the skyCUBE M Laser Processing Center: - Industrial-grade German steel machine construction for stable and vibration-free installation of laser components and axis systems, equipped with industrial leveling feet on rollers - 8" touchscreen display – more visibility, more control, and better communication with the skyCUBE M Laser Processing Center - Redundant safety system – Class 1 laser

Būklė: naujas, Gamybos metai: 2025, 2D / 3D Laser Engraver skyLaser Mark – 2D optionally 3D fiber laser engraver / marking laser is the complete solution for your complex laser engraving applications. Gedo Sd Ubopfx Af Doua

Būklė: naujas, Gamybos metai: 2025, If you are looking for a genuine type plate laser machine and not a toy, then you are in the right place: (*Price details depend on configuration and laser power; this is a brand new laser system from our own manufacturing) Laser Marker skyLaser Mark – 20W 2D Software, optional 3D Fiber Laser Engraving/Marking Laser is the complete solution for your complex laser processing requirements – Nameplate Laser Machine Attention: Compare the installed components in the laser systems offered: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, cables – all components are exclusively sourced from German manufacturers! The laser systems are 100% custom-built in our Plauen factory according to your specifications. Competitors often use Chinese components (it starts with the controller – EZCAD = Chinese origin!) (*The stated price may vary depending on the equipment; the images show different equipment variants; you will receive a brand new laser machine made in-house) Ideal solution for: - Product identification - Laser marking - Laser engraving - Laser cleaning - Laser removal Our skyLaser Mark nameplate laser systems are used exactly where conventional CO2 laser technology reaches its limits. With the fiber laser at a wavelength of 1064nm, even the finest structures can be reproduced on almost any material. The main advantages in your application are geometric flexibility and high processing accuracy. This processing method can be used regardless of the hardness of the workpiece material. The customizable, mobile workstation increases the system’s flexibility; you can effortlessly integrate the system into your production line or use it as a stand-alone solution. Our skyLaser Mark delivers highly precise and permanent markings (laser engravings) and is particularly suited for specialized nameplate laser applications on metal and certain organic materials. A wide range of font types can be used, and it's easy to apply barcodes, serial numbers, logos, and images. Thanks to excellent resolution, almost any marking requirement can be met. Production of embossing stamps, engravings, markings, and complex, fine details – the software is extremely user-friendly. Even highly complex and intricate marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in seconds thanks to an optional observation camera for process monitoring and software-assisted workpiece alignment. Since the system has virtually no wear parts and is nearly maintenance-free due to the IPG laser technology, it is ideal for industrial and continuous operation. Godpfx Asdgfgcof Dsua The skyLaser marking/engraving laser at a glance: - Working area: from 110x110 mm, 120x120 mm, or 300x300 mm (F-Theta lenses depending / 3D option) - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) - SCANLAB galvanometer scanner - Nominal laser power: 20W