Deckel Fp1 pirkti naudotą (689)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed – very good condition – CE compliant Technical Data: • Year of manufacture: 1992, Machine No. 2102-6209 • Rigid angle table (newly planed) • Spindle speed: 40 - 2000 rpm • Stepless feed in 3 axes • Rapid traverse in 3 axes • Drive power: 1.5 / 1.9 kW • Spindle brake • Travel distances X/Y/Z: 300 / 160 / 340 mm • Vertical milling head can be shifted 100 mm on spindle carrier • Vertical and horizontal quill – SK40 • Drawbar system M16 • Weight approx. 800 kg Accessories and Equipment: • 3-axis digital display Heidenhain TNC113 • Coolant system • Machine lamp • Operating manual, spare parts list Gedpfx Ajxdi Iveh Aeub About the Machine: For sale is a Deckel FP1 universal milling machine, CE compliant and in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, which makes transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine also features rapid traverse on these axes. An important advantage is the active 3-axis digital display. With this Heidenhain distance controller, you can enter dimensions that the machine will move to automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition! Technical Data: >> Machine No. 55249/08, Year 2010 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Drive Power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical Quill SK40 and Horizontal Quill SK40 >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: Gedpfxjxu Hbhj Ah Asub >> 3-axis Digital Readout Heidenhain ND 780 >> Hydraulic Vice >> Collets >> Tool Holders >> Cutters >> Operating Manual >> Coolant System About the Machine: Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis K&C New Digital Readout and Infinitely Variable Feed on 3 Axes – Excellent CONDITION Technical Data: - Year of manufacture: 1983 - Machine No.: 2102-2444 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes Guodpfjtwlwzox Ah Ajb - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel distances X/Y/Z: 300/160/340 mm - Vertical milling head adjustable on column by 100 mm - Vertical and horizontal quill – SK40 - Drawbar system S20x2 - Weight approx. 800 kg Accessories and Equipment: - 3-axis digital display K&C newly fitted with manufacturer’s warranty and operating instructions. Display unit: Setting reference points, zero points, input of coordinates, mm/inch conversion, absolute or incremental coordinates, circle functions, hole array, radius milling functions, etc. - Coolant system - Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, year 1983, in outstanding condition. The machine shows minimal backlash and all lead screws move smoothly. Even at maximum speeds the milling machine runs very quietly. On this newer FP1 model, the feed can be steplessly regulated on all three axes, and rapid traverse is also available on these axes. The FP1 was located in a training workshop and was only used intermittently. An oil change has been performed. The machine has been mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm Guodpfxjvb Ud Us Ah Asb >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm Guedju Racropfx Ah Asb >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed – Excellent Condition Technical Data: >> Year of manufacture: 1990, Machine no. 2102-5046 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel range X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts plan Gojs3G About the machine: Offered here is a Deckel FP1 universal milling machine, year 1990, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be continuously adjusted on all three axes, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will move to automatically. The FP1 was previously used in a training facility, where it was only operated occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site. Gjdpeu Um Erjfx Ah Aoub

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, like new condition!! Technical data: >> Machine No.: 2101-51084, year 2011 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders Guedpewpi Dqofx Ah Asb >> Milling cutters >> Operating manual >> Coolant system About the machine: Offered is a universal milling machine Deckel FP1 repowered by FPS in like-new condition. Included in the accessories are the hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. You have the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Guedpfx Ahjxu E R Io Asb Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the spindle head >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electrical lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1985 >> Machine no.: 2102-2867 >> Swiveling-tilting rotary table (newly ground) >> Spindle speeds: 40 – 2000 rpm Gusdpfxot Aarpe Ah Asb >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 taper >> Clamping system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual. Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc. >> Coolant device >> Operator’s manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C, Infinitely Variable Feed, in Light Grey – Excellent Condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2101-0465 Guodot Aav Ispfx Ah Asb >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle support by 100 mm >> Vertical and horizontal quill - ISO 40 taper >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout system (K&C), newly installed, with manufacturer's warranty and operating manual. The display unit features: reference points, zero point setting, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered is a universal milling machine Deckel FP1 in excellent condition. The machine has very little backlash and all the spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is infinitely variable on two axes, and the machine is also equipped with rapid traverse. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout Original Condition!!! Technical Data: >> Machine No. 56560/08, Year of manufacture approx. 1975 >> Fixed angle table >> Speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and features: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels, and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel onsite under power. Gsdpfou Nvxmex Ah Ajub

Būklė: geras (naudotas), Parduodama iš dalies restauruota frezavimo staklė DECKEL FP1 aktiv su 3 ašių Heidenhain skaitmenine indikacija TNC 113 ir dalijimo stalu su trijų žandikaulių griebtuvu. Dėl kompaktiškos konstrukcijos puikiai tinka mažai hobių dirbtuvei ar garažui. Gamintojas: DECKEL Tipas: FP1 Staklių Nr.: 2102-3314 - Eiga X/Y/Z 300x160x340 mm - Sukimosi greičio diapazonas 40–2000 aps./min - Trys ašys be pakopų reguliuojamu poslinkiu Gjdpfx Asxmggujh Asub - Greitas poslinkis visose trijose ašyse - Vertikalioji frezavimo galva - 100 mm horizontali eiga - vertikaliai - Horizontalioji frezavimo įranga - 3 ašių Heidenhain skaitmeninis indikatorius TNC113 - Aušinimo sistema - Dalijimo stalas su trijų žandikaulių griebtuvu Bendra galia: 1,9 kW Staklių matmenys (I x P x A): 1,30 x 1,10 x 1,60 m Svoris: apie 850 kg Kaina nurodyta be PVM, atsiėmimas iš sandėlio. Būklė: naudota.

Būklė: naudotas, Universali frezavimo staklės DECKEL FP1 Eiga X: 300 mm Eiga Y: 150 mm Eiga Z: 300 mm Horizontali ir vertikali ašis Kūgis SA40 DECKEL Veleno greitis: nuo 40 iki 2000 aps./min. Guodpfx Asxxpp Nsh Aeb Stalo matmenys: 600 x 210 mm Horizontaliai pakreipta galva Tiesus stalas Veleno variklis: 2 greičiai Variklis: 1,3 kW Pavaros: X – Z automatinės / Y rankinė Įtampa: 380 V Plotis: 1200 mm Gylis su elektros skydeliu: 1200 mm Aukštis: 1600 mm Svoris: apie 900 kg

Būklė: naudotas, Universalus frezavimo staklės DECKEL FP1 Eiga X ašyje: 300 mm Eiga Y ašyje: 150 mm Eiga Z ašyje: 300 mm Horizontali ir vertikali špindeliai Kūgis CM4 DECKEL Špindelio greitis: nuo 40 iki 2000 aps./min. Horizontaliai pakreipiama galva Špindelio variklis: 2 greičiai Variklio galia: 1,5 kW Padavimas: X - Z automatinis / Y rankinis Pateikiama be stalo, tik su viena 4 žandikaulių koncentrine griebtuvu Ø 140 mm Įtampa: 380 V Plotis: 1200 mm Gylis: 1200 mm Gusdpfxsxyymbo Ah Aeb Bendras aukštis: 1600 mm Svoris: apie 900 kg

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Guodjxnniaopfx Ah Asb Condition: Very good Control type: Conventional Control system: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Spindle speed: 40-2000 rpm Control system: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement (LxWxH): approx. 1200x1100x1600 mm

Būklė: naudotas, mašinos/transporto priemonės numeris: 28670, X-travel: approx. 400 mm y-travel: 150 mm z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed range - vertical: 60 - 1200 rpm Speed range - horizontal: 95 - 1900 rpm Spindle speed steps: 12 Feed range: 10 - 500 mm/min Feed steps: 10 Spindle taper: MT 4 Gusdjcxxlispfx Ah Aob Vertical quill stroke: 60 mm Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.9 x 1.05 x 1.55 m

Būklė: naudotas, mašinos/transporto priemonės numeris: 52326/08, x-axis travel: 250 mm y-axis travel: 150 mm z-axis travel: 305 mm Gusdocxxrvopfx Ah Aeb Table clamping surface: 600 x 210 mm Spindle speed range: 40 - 2000 rpm Number of spindle speeds: 16 Spindle taper: SK 40 Feed rate: 10 - 500 mm/min Number of feed rates: 16 Swiveling vertical head: +/- 90 degrees Total power requirement: 1.0 / 1.4 kW Machine weight approx.: 0.8 t Space requirements approx.: 1.0 x 1.25 x 0.85 m Universal tool milling machine type Deckel FP1 with: - Swiveling vertical spindle, - Vertical head swivels +/- 90°, - SK40 spindle taper, - Automatic feeds, - Two-speed (pole-changing) motor, and - Separate control cabinet with main switch.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 160 mm, padavimo ilgis Z ašis: 320 mm, bendras svoris: 860 kg, Universal Tool Milling Machine Ruhla Type 58 Thiel Duplex 58 Comparable to Deckel FP1 Gujdpfx Ahewf Agdo Ajb Compact machine with boring quill and automatic feed on all 3 axes including vice New digital readout included with 1 measuring scale Swiveling table ±0–30° Table size 715 x 260mm X-axis: 300mm Y-axis: 160mm Z-axis: 320mm Dimensions (LxWxH) approx. 110 x 110 x 170cm Inspection and testing are welcome.

Būklė: geras (naudotas), Deckel FP1 milling machine, manufactured in Germany by Friedrich Deckel AG, Munich. The machine is fully operational and in good working condition. For further information, please do not hesitate to contact us. Guodpfx Ahow Amais Aeb

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, For sale is a partially refurbished Deckel FP1 milling machine with 3-axis Heidenhain TNC113 active control, notable for its user-friendly operation. This newer model, manufactured in 1989, features central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary/swivel tilting table Gsdpfxopy Elde Ah Aeub Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering. - All machines undergo thorough inspection. - All lubricants and, if necessary, worn parts are replaced beforehand. - On request, we can provide a complete or partial overhaul of the selected machine. - You can order additional accessories such as tools, etc., directly with your purchase. - On request, additional features such as safety equipment can be supplied and installed. - We are happy to arrange shipping and/or machine installation for you.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universali frezavimo staklė Gamintojas: DECKEL Modelis: FP 1 Aktiv Pagaminimo metai: 1990 – patikrinta dirbtuvėse Mašinos Nr.: 2102-5866 Frezgalvės tipas: 2171 Frezgalvės numeris: 4613 Geometrinis priėmimas su tikrinimo protokolu Priedai: - 3 ašių aktyvusis skaitmeninis indikatorius HEIDENHAIN TNC 113 su aktyvia X, Y ir Z ašių funkcija - Universalus stalas 590 x 250 mm (T-griovelis: 12 mm) - Vertikali frezgalvė SK 40 su įtempimo sriegiu S 20 x 2 - Be aušinimo įrenginio, gali būti sumontuotas pagal poreikį - Centrinis elektrinis tepimas - Naudojimo instrukcija Naudota, kaip matyta, be garantijos Guedpox S Edlefx Ah Aob Mašina atitinka techninį to laiko lygį.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1987 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Machine no.: 2102-3429 with warranty Geometric acceptance with inspection protocol Accessories: Gjdshtrd Ispfx Ah Ajub - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbolt thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating manual - used, as seen -

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1984 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with warranty Geometric acceptance with test protocol Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function on X and Z axes - Fixed table 600 x 200 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system Godpfx Ahochfyfs Aeub - Operating manual - used, as seen -

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Gedpfx Ajmhfrrjh Aeub Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. Electrical and electronic systems are excluded from the warranty, as they have only been function-tested. For machines located outside our North Bavarian sales region, travel costs are to be borne by the customer. Geometric inspection with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, as inspected Technically, the machine corresponds to the state of the art at the time of manufacture.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Gusdpedf E H Aefx Ah Aob Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometrical inspection with test report Accessories: - 3-axis digital readout, FAGOR Innova 30i-M, new - Fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual - used, as seen -