Įrankių frezavimo staklės

Deckel FP1Aktiv

Sąlyga: geras (naudotas), Gamybos metai: 1985, Deckel FP1 Aktiv su 3 ašių Heidenhain skaitmenine indikacija, 3 aktyvios ašys, standus stalas, SK 40 M16 veleno laikiklis. Centrinis tepimas, naudojimo instrukcijos. Geros, darbingos būklės, atvežta iš profesinio mokymo centro. Pagal susitarimą galima parodyti veikiančią. Kedpfxoxwunzs Ahwend

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 0001210226, Model table size: 236 x 460 mm Working table size: 200 x 500 mm Longitudinal working area: 300 mm Transverse working area: 160 mm Spindle speeds: 1,900 – 15,000 rpm Milling ratio: 1 : 1 (105 x 165 mm) / 1 : 5 (44 x 80 mm) Space requirement: 800 x 900 x 1,250 mm Kedpfebv S Eljx Ahwjnd Weight: 340 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed – Excellent Condition Technical Data: >> Year of manufacture: 1990, Machine no. 2102-5046 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel range X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts plan Knsdeu Um Erjpfx Ahwjd Gojs3G About the machine: Offered here is a Deckel FP1 universal milling machine, year 1990, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be continuously adjusted on all three axes, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will move to automatically. The FP1 was previously used in a training facility, where it was only operated occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 340 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, Dear Sir or Madam, We are offering a Deckel FP1 3-axis milling machine (active), equipped with retrofitted safety features. These newer models are fitted with central lubrication, an electric coolant pump, and a brake motor. The control cabinet can be quickly disconnected from the machine thanks to a Harting connector. The safety components are also connected to the cabinet using this connector type, ensuring ease of handling is not compromised. You receive a 12-month warranty on the retrofitted safety devices, which we can offer for any machine type! The electronic spindle guard is adjustable in multiple axes and is designed to prevent access to the work spindle as well as hazards from flying chips, coolant, etc. The electronic spindle safety hood prevents access to the rotating spindle stub and the tool clamping mechanism. Delivery time: On request Year of manufacture: 1989–1992 Machine no.: 2102-xxxx Table: Fixed angle table Travel distances: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Power supply: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: Infinitely variable, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine mounts, electronic spindle guard, electronic spindle safety hood Kodpfx Aeuw Uu Nehwend Our service promise to you: - We are a certified master engineering company - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul your selected machine - On request, you can order additional accessories such as tools directly - On request, we can install other accessories such as safety devices - We are happy to handle shipping and/or bring-in logistics for you

Sąlyga: naudotas, Gamybos metai: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop-inspected Machine No.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant unit - Centralized electrical lubrication system - Operating manual Ksdpfx Asr En Dyshwsnd Used, as seen, without warranty The machine corresponds technically to the state of the art at the time of manufacture.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Travels: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Knjdpfx Aexpwfgohwjd Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power connection: 380 Volt, 50 Hz Equipment: - Active digital display, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and can be extended 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Videos of the geometry can be sent on request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout, horizontal spindle: 0.002 mm Runout, vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital display overhauled - Wiper set installed - LEDs for active display replaced - Oil change - Vertical milling head newly fitted with bearings - Oil sight glass replaced Net price, loaded free at warehouse

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Knjdpfeu Racrjx Ahwed Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Sąlyga: geras (naudotas), Gamybos metai: 1986, 1 naudota universali įrankių frezavimo staklė Gamintojas: Deckel Tipas: FP 1 Kodpfx Ahjwuu Sdewend su aktyvia Heidenhain skaitmenine indikacija Techniniai duomenys: X eiga: 300 mm Y eiga: 160 mm Z eiga: 340 mm Veleno tvirtinimas: SK 40 Stalo dydis: 600x210 mm Veleno apsukos: 40–2000 aps./min. Staklių svoris apie: 1 t Reikalinga vieta apie: 1,6x1,3x1,8 m

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, We are offering for sale a partially overhauled Deckel FP1 with a 3-axis TNC113 active control, which stands out for its particularly user-friendly operation. This newer version from the year 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to inspect on-site. As part of the partial overhaul, the following work, among others, was carried out: - Spindle bearings of the milling head replaced - Repainting - Various standard parts such as handles, oil sight glasses, buttons, etc. replaced - Wear parts such as drive belts, etc. replaced - Some bellows replaced - Gib strips adjusted - and much more… Knjdpfxepy Elds Ahwed Delivery time: immediately Year of manufacture: 1989 Machine no.: 2102-xxxx Table: fixed angle table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: coolant system, central lubrication, manual, machine mounts Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can overhaul your chosen machine either completely or partially - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list Kjdpeu T D Nrefx Ahwjnd About the machine: Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Sąlyga: naudotas, Gamybos metai: 1980, x-axis travel: 300 mm y-axis travel: 160 mm z-axis travel: 340 mm Kedpfx Ahjw A Ap Hewjnd Tool holder: SK40 Spindle speed: 40-2000 rpm Control: Heidenhain Aktiv Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement approx. (LxWxH): 1200 x 1100 x 1600 mm - Powered feed on X and Z axes - Röhm vise - Coolant system - Various holders and clamping devices - Operating manual

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site. Knsdou Nvwvjpfx Ahwjd

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW Ksdpfju R D I Ssx Ahwond >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.

Sąlyga: naudotas, Gamybos metai: 1980, x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Tool holder: SK40 Speed range: 40–2,000 rpm Control: HEIDENHAIN Aktiv Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight approx.: 0.73 t Required floor space approx.: LWH 1200 × 1100 × 1600 mm - Power feed in X and Z axis - Additional swiveling table 600 × 210 mm - Coolant system - Counter bearing for horizontal milling - Various tool holders, clamping devices, and cutters included Knedpfjw A Apyjx Ahwed - Operating manual

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Kodsxu E R Iepfx Ahwend Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the spindle head >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electrical lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises. The machine is available immediately.