Deckel Fp 3 A pirkti naudotą (692)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, veikimo valandos: 39 945 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 450 mm, Y ašies eiga: 580 mm, Z ašies eigos atstumas: 400 mm, valdiklių gamintojas: Heidenhain iTNC 530, bendras aukštis: 2 900 mm, bendras ilgis: 5 500 mm, bendras plotis: 2 650 mm, veleno greitis (min.): 28 000 aps./min, aušinimo skysčio tiekimas: 40 juosta, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel distance X-axis mm: 450 Travel distance Y-axis mm: 580 Travel distance Z-axis mm: 400 C-axis indexing degrees: 360° (0.0001) A-axis indexing degrees: +10 / -110° Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC milling/turning table: Pallet system: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: baseplate for reference pallet Max. workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm); for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/continuous) Cooling Coolant supply through spindle bar: 40 Fsdpfx Aoxv Av Rsf Ajpg Tank capacity liters: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Rinse gun Purge air through spindle center selectable via M-function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Tool holders not included Tools not included Paper band filter Machine operating hours: Power-on time: 62,983 Spindle hours: 39,945 Total power requirement kVA: 55 Base machine: dimensions/weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 560 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 450 mm, X ašies padavimo greitis: 3 600 m/min, Y ašies padavimo greitis: 3 600 m/min, padavimo greitis Z ašis: 3 600 m/min, plunksnos brūkšnys: 80 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 40 aps./min, greitas poslinkis X ašimi: 4 m/min, greitas poslinkis Y ašis: 4 m/min, greitasis eiga Z ašyje: 4 m/min, stalo ilgis: 530 mm, stalo plotis: 900 mm, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 40 aps./min, stalo apkrova: 450 kg, Įranga: sūkių greitis be galo kintamas, The machine is designed and built to be very stable and robust. Its excellent accessibility makes it exceptionally user-friendly. The machine can also be moved manually using mechanical hand wheels. CNC Path Control DECKEL Dialog 11 Easy-to-program 3D path control with color graphic support, cycle input dialogue guidance, contour calculator, editor functions, clear program and tool management, parallel programming possible. Travel X / Y / Z: 560 / 500 / 450 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar bolt DIN 2080 or DIN 69872 Fpsdpfx Asyn Dq Iof Ajg Working spindle: vertical and horizontal. Manually extendable quill vertically 80 mm. Milling head: manually tiltable +/- 90° Speed range: 40–4000 rpm, geometrically graduated Direct gearbox for maximum torque / milling performance at the working spindle Feed: 2–3600 mm/min, steplessly adjustable feed rate Rapid traverse: 4000 mm/min Swivel table: 530 x 900 mm, max. load 450 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Valdymas 3 ašių, aktyvus Heidenhain TNC 123 trajektorijos valdymas Fodpfx Aoyg I Nfjf Aopg Apsisukimų dažnis 40–2000 aps./min, geometriškai sugradintas tiesioginis reduktorius su 16 pavarų didžiausiam sukimo momentui / frezavimo galiai Pjovimo eiga 5–500 mm/min, reguliuojama be pakopų Greitos eiga 1,2 m/min Pinolė: ištraukiama pinolė, vertikali 60 mm, SK40 M16 tempimo sriegis Ašys X/Y/Z 300/160/340 mm Kampinis stalas 600 x 210 mm, maks. apkrova 200 kg

Būklė: naudotas, Gamybos metai: 2002, BAZ Deckel Maho DMF 250 linear pagaminimo metai 2002 ir DMC 63 H pagaminimo metai 2002 Fodpfx Aoyphl Eof Aopg

Būklė: geras (naudotas), Electric motor, three-phase motor, brake motor - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from Deckel FP4L milling machine Fpjdpfxsul H Dwo Af Aog - Power: 4.0 kW - Speed: 1,435 rpm - Design: B14 - Protection class: IP 44 - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Būklė: geras (naudotas), Vidinis straipsnio Nr.: 25110 Universali frezavimo staklės Deckel FP3 Staklių Nr.: 2482 + 3 ašių skaitmeninis indikatorius + Apsauginis gaubtas su jungikliu (UVV) + Staklių lempa + Įvairūs SK40 įrankių laikikliai ir įtempimo žiedų rinkinys (S20x2) Frezavimo stalas: 800 x 420 mm Veleno tvirtinimo tipas: SK40 Maks. apsisukimai: 2000 aps./min. Variklio galia: 3 kW Eigos X/Y/Z: 500/300/400 mm Fodpfx Afoyb Su Uo Ajpg Matmenys (I x P x A): 1400 x 1500 x 1800 mm Svoris: apie 1500 kg Staklės visiškai veikia ir gali būti apžiūrimos po susitarimo, prijungus prie tinklo daugiau nei 500 m² šildomoje sandėlio erdvėje.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3L with Brand New 3-Axis Digital Readout K&C – Excellent Condition Technical Specifications: >> Year of manufacture: approx. 1975, Machine No. 0924 >> Fixed angle table (clamping surface 1000 mm x 440 mm) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed rate: 10 to 500 mm/min >> Rapid traverse: 1500 mm/min in all feed directions >> Drive power: 2.2 kW >> Travels X/Y/Z: 800/300/400 mm (Y-axis can be shifted by 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill extendable, SK40 taper >> Drawbar system S20x2 >> Weight approx. 1900 kg Accessories and Features: >> 3-axis digital readout K&C, newly installed with manufacturer warranty and user manual. Readout unit: Reference points, zero points setting, coordinate input, mm/inch conversion, absolute or incremental coordinates, circle functions, bolt-hole circles, radius milling functions, etc. >> Mechanical central lubrication >> Operating manual >> 160 mm hydraulic vice Fpedpfxsvn N Hdo Af Aeg >> Walter rotary table 500 mm About the machine: Offered is a universal milling machine Deckel FP3L in excellent condition. The vertical head can be shifted by 200 mm to provide an even larger working area. A central pump provides lubrication for the various axes. A distinctive feature of this model is its design: it is a machine with an inclined bed. All movement is assigned to the working spindle—and therefore to the tool. This results in outstanding accuracy, as different workpiece weights have no influence on axis movement. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 340 mm, plunksnos brūkšnys: 80 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, stalo ilgis: 210 mm, stalo plotis: 600 mm, bendras aukštis: 1 750 mm, bendras ilgis: 1 400 mm, bendras plotis: 1 600 mm, sukimosi greitis (maks.): 2 000 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 850 kg, stalo apkrova: 200 kg, garantijos trukmė: 3 mėnesiai, Mašina buvo mūsų dirbtuvėse pilnai / iš dalies perrinkta 2026 m., šiuo metu yra puikios būklės. Dalinio kapitalinio remonto metu sumontuotas naujas stabdžio variklis. Valdymas 3 ašių - aktyvus - skaitmeninis indikatorius HEIDENHAIN TNC 113 Sukimosi greitis 40-2000 aps./min., geometriškai sudėliota tiesioginė transmisija su 18 sukimosi greičių pakopų – didžiausias sukimo momentas / frezavimo našumas Pasiūla 5–500 mm/min, be pakopų reguliuojamas Greitas poslinkis 1,2 m/min Pinolė Ištraukiama vertikali pinolė 80 mm SK40 su M16 sriegiu įtraukai, pasirinktinai: DECKEL pjūklo sriegis S20 x 2 Ištraukiama horizontali pinolė apie 100 mm Ašys X/Y/Z 300/150/340 mm Stalas Standus kampinis stalas 600x210 mm Didžiausia stalviršio apkrova 200 kg Fsdpfeyi Amwex Af Aepg Įranga • Vertikali ir horizontali velenas • Rankiniu būdu pasukamas frezavimo galvutė +/- 90 ° • Z ašies gofruota apsauga Pasirinkimai • Drožlių padėklas • Mašinos apšvietimas • Universalus stalas • Apvalus stalas • Štampavimo galvutė • Dalijimo įrenginys • Priešpriešinis laikiklis • ir kt.

Būklė: naujas, Gamybos metai: 2026, Completely overhauled, as-new machine, upgraded to the legally required safety standard 'state of the art' in accordance with the occupational health and safety regulations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest legal requirements specified by the German Social Accident Insurance (Berufsgenossenschaften): BGVA 3 / DIN-EN 60204-1—new machine standard. Fedsh Sptnspfx Af Aspg Optionally, the complete machine can be supplied in CE configuration. A CE Declaration of Conformity will be issued for the machine. Thus, FPS Werkzeugmaschinen GmbH takes on the role of manufacturer. The machine thereby meets the requirements of the Occupational Safety Ordinance (BetrSichV). Consequently, the year of manufacture corresponds to the actual delivery date of the machine. Relevant standards: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control System 3-axis FPS Aktiv digital display Spindle Speed 25–2500 rpm, direct-drive transmission with 18 geometrically graded speed levels for maximum torque / milling performance Feed Rate 5 to 500 mm/min, steplessly adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical stroke 100 mm, SK40 with M16 drawbolt thread Optionally: with DECKEL saw thread S20 x 2 Extendable quill, horizontal stroke approx. 100 mm Axes X/Y/Z: 800/300/400 mm Table Fixed angle table 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication system • Universal table • Rotary table • Slotting head • Dividing attachment • Steady rest • etc.

Būklė: geras (naudotas), Gamybos metai: 1998, Machine is dirty Technical condition is good Fjdevptmkspfx Af Aepg Rotary and swiveling table is installed

Būklė: paruoštas naudoti (naudotas), Deckel Maho 5100027000 Touch Panel for Deckel Maho CNC 432 control unit, serial number as shown in photo, used, normal signs of wear, 100% functional, scope of delivery as per photos. Fodpfx Afji D Upge Ajpg

Būklė: paruoštas naudoti (naudotas), Deckel Maho Lasersoft 3D valdymo pultas / panelė, naudotas, geros būklės, visiškai veikiantis, komplektacija pagal nuotraukas. Fodpfx Asx Eq E Ief Aopg

Būklė: paruoštas naudoti (naudotas), X ašies eiga: 300 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 340 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, frezos galvos padėtis: SK40, įėjimo įtampa: 400 V, Deckel FP1 2-axis Active Travels: X = 300 mm Y = 160 mm Z = 340 mm Fpsdpfx Afevuzg Ae Aog Spindle speed: 40–2000 rpm Automatic feed and rapid traverse on X, Y and Z axes. Infinitely variable. Table size: 600 x 260 mm 2-axis Aktiv control, point-to-point operation. 3-axis digital readout by Heidenhain. Spindle taper: SK40 Deckel (external thread connection).

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication Fedju R D I Sepfx Af Aepg >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier Fpjdpou Nvwvefx Af Aeg In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Fpjdpfsu T D Nrsx Af Asg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 Fjdpfxovb Ud Uj Af Aepg >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Fpedpfx Afju Racre Aeg >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Display TNC 113 Heidenhain and Infinitely Variable Feed – Excellent Condition Technical Data: >> Year of manufacture: 1990, Machine no. 2102-5046 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel range X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts plan Gojs3G About the machine: Offered here is a Deckel FP1 universal milling machine, year 1990, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be continuously adjusted on all three axes, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will move to automatically. The FP1 was previously used in a training facility, where it was only operated occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site. Fpedsu Um Eropfx Af Ajg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the spindle head >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Fpedoxu E R Iopfx Af Ajg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electrical lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Fodeu Tuk Hopfx Af Aepg Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with 3-Axis Digital Display RSF Elektronik Z-530!! Fjdpjxu E I Hefx Af Ajpg Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swiveling-tilting rotary table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable – SK-40 >> Drawbar system M16 >> Weight: approx. 1300 kg Accessories and Features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the Machine: A Universal Milling Machine Deckel FP3 is being offered in good condition. All spindles move smoothly. Most of the bellows are almost new. The swiveling-tilting rotary table is as new. Oil change has been carried out. Mechanically and electrically tested. The digital display makes work easier and more precise. You are welcome to inspect and test the Deckel on site under power. The machine is available immediately!!!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Fpedpfxoxnniae Af Ajg Condition: Very good Control type: Conventional Control system: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Spindle speed: 40-2000 rpm Control system: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement (LxWxH): approx. 1200x1100x1600 mm

Būklė: naudotas, mašinos/transporto priemonės numeris: 1621, x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm Table size: 1000 x 440 mm Tool holder: SK40 Spindle speeds (pulley): 40 - 2000 rpm Number of spindle speed steps: 18 Maximum spindle speed: (6000 possible by changing the belt) rpm Feed range: 10 - 500 mm/min Number of feed steps: 18 Total power requirement: 3 kW Machine weight approx.: 2.1 t Space requirement approx.: 1600 x 1550 x 1930 mm Fedpfx Ash Ra Nqsf Aspg Universal tool milling machine in travelling column design, suitable for machining heavy workpieces. Equipped with a 3-axis rotary and swiveling worktable, power feeds and rapid traverses in all 3 axes, vertical and horizontal quills with high-speed head. Maximum speeds of 1900/2350/3000/3750/4750/6000 rpm adjustable via belt drive. Includes coolant pump, universal clamping table with 6 T-slots of 16 mm x 7. Separate control cabinet (main machine switch not included).

Būklė: naudotas, Gamybos metai: 1984, X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 700 x 470 mm Spindle speeds: 40 – 4000 rpm Feed range: 0.2 – 3600 mm/min Rapid traverse speed: 4.0 m/min Quill stroke: 90 mm Spindle taper: SK 40 Control: Deckel Dialog 3 Drive power - milling spindle: 3 kW Total power requirement: 22 kW Machine weight approx.: 1.8 t CNC-controlled universal milling machine with Deckel Dialog 3 control, swiveling vertical head with quill, horizontal spindle, feeds, rapid traverses, electronic handwheel, additional portable operator panel, hydraulic tool clamping, automatic central lubrication, machine lamp, coolant system, separate coolant tank, various tool holders, emergency stop. Fpodpocxxypjfx Af Aog - Machine sold - - SOLD -