Deckel Fp 3 A pirkti naudotą (674)

Sąlyga: geras (naudotas), Gamybos metai: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good, fully operational condition. Can be demonstrated under power by prior arrangement. Bedpfxouclbzs Admedk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed – very good condition – CE compliant Technical Data: • Year of manufacture: 1992, Machine No. 2102-6209 • Rigid angle table (newly planed) • Spindle speed: 40 - 2000 rpm Bedpfxoxdi Ivo Admjdk • Stepless feed in 3 axes • Rapid traverse in 3 axes • Drive power: 1.5 / 1.9 kW • Spindle brake • Travel distances X/Y/Z: 300 / 160 / 340 mm • Vertical milling head can be shifted 100 mm on spindle carrier • Vertical and horizontal quill – SK40 • Drawbar system M16 • Weight approx. 800 kg Accessories and Equipment: • 3-axis digital display Heidenhain TNC113 • Coolant system • Machine lamp • Operating manual, spare parts list About the Machine: For sale is a Deckel FP1 universal milling machine, CE compliant and in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, which makes transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine also features rapid traverse on these axes. An important advantage is the active 3-axis digital display. With this Heidenhain distance controller, you can enter dimensions that the machine will move to automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Gamybos metai: 1968, Sąlyga: geras (naudotas), For sale is a Deckel milling machine from the year 1968. The machine is in good to very good condition and is fully functional. (No digital readout, but can be installed additionally upon request.) Technical specifications: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing? Or are you looking to sell yours? For further information or contact options, please visit our website. Bedpeihf Etefx Admodk

Sąlyga: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electronic hand controller - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Spindle speed: 31.5 - 3,150 rpm with 21 gear steps Feed rate: 4-2000 mm/min Bdodpfxowid Spj Admek Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilting: 15°/45° - B-axis swiveling: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional features: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space including auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and in operation by appointment.

Gamybos metai: 1980, Sąlyga: paruoštas naudoti (naudotas), Max. rotational speed: 2500 rpm, feed rate: 5–500 mm/min. Bsdpfjfdzzyox Admsdk

Sąlyga: naudotas, X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Spindle speed: 31.5 - 1600 rpm Tool holder: SK 40 Quill stroke (vertical): 80 mm Quill diameter: 80 mm Table: 1000 x 850 mm Total power requirement: 4.0 kW Machine weight approx. 2.6 t Bdedpfx Adjvlakuomsk Dimensions (L x W x H): 2.1 x 1.7 x 1.7 m Universal tool milling machine - Digital readout - Swivel table - Coolant system - Machine feet

Sąlyga: geras (naudotas), Gamybos metai: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good working condition, can be demonstrated under power by arrangement. Bdjdpfx Adjtp Nyfemjk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, special paint finish in Light Grey, CE compliant! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed angle table (newly scraped) >> Speed range: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min Bdsdpfjxctyajx Admok >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved 150 mm on spindle carrier >> Vertical and horizontal quill - ISO 40 taper >> Vertical quill extension: 90 mm >> Drawbar system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication system About the Machine: Offered is a Universal Milling Machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all axes move smoothly and evenly. The milling machine runs smoothly even at maximum speeds. Rapid traverse in all axes, all bellows have been replaced. The fixed angle table has been newly scraped. This is a reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout facilitates and further increases the precision of milling tasks. Take the opportunity to inspect and test the machine under power at our facility.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 2832-1076, padavimo ilgis X ašis: 560 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 390 mm, X ašies eiga: 560 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 390 mm, X ašies padavimo greitis: 4 m/min, Y ašies padavimo greitis: 4 m/min, padavimo greitis Z ašis: 4 m/min, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 40 aps./min, greitas poslinkis X ašimi: 4 m/min, greitas poslinkis Y ašis: 4 m/min, greitasis eiga Z ašyje: 4 m/min, bendras aukštis: 2 265 mm, bendras plotis: 2 410 mm, bendras ilgis: 2 710 mm, stalo plotis: 530 mm, stalo ilgis: 900 mm, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 40 aps./min, stalo apkrova: 800 kg, bendras svoris: 2 890 kg, įėjimo įtampa: 380 V, ruošinio svoris (maks.): 800 kg, įėjimo srovė: 44 A, įėjimo dažnis: 50 Hz, ašies skaičius: 2, įrankių magazino lizdų skaičius: 20, Įranga: dokumentacija / vadovas, Tool holder: SK 40, Control system: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer is not operational. Otherwise, the machine is fully functional. Bdjdpfx Adjwqdtpemjk Operator’s manual (Machine manual 1), diagnostic manual for the DIALOG11 control, machine manual 2 (accessories), programming manuals 1-3, and electrical schematics are available. The machine can be inspected under power. The machine is sold as seen. No warranty.

Gamybos metai: 1987, Sąlyga: geras (naudotas), X-axis travel: 710 mm Y-axis travel: 600 mm Z-axis travel: 445 mm CNC control: DIALOG 4 Spindle speeds: 18 - 6,300 rpm Table size: 550 x 1,000 mm Table load capacity: 600 kg Feed rate: - Manually adjustable: 10 – 3,150 mm/min - Programmable: 2 – 6,000 mm/min Rapid traverse rate: 6,000 mm/min Drive power: 7.5/9.5 kW Switch-operated tool clamping, hydraulic – SK 40 Quill stroke: 80 mm Bdedpfxsf Nf Anj Admok Coolant system Operating voltage: 380 V Total connected load: 20 kVA Machine weight: approx. 4.8 t Space requirement: approx. 2.15 x 3.80 x 2.40 m Electrical cabinet: 1.60 x 0.70 x 1.25 m

Gamybos metai: 1990, Sąlyga: paruoštas naudoti (naudotas), Control: Deckel Dialog 11, with vice, inspection possible. Bdedpfoqi D S Uox Admsk

Sąlyga: naudotas, Milling Machine Make: DECKEL Model: FP2 Technical Data Manufacturer: DECKEL Model: FP 2 Table size: 700 x 330 mm X-axis travel: 490 mm Y-axis travel: 390 mm Z-axis travel: 200 mm Spindle taper: ISA 40 18 spindle speeds: 40 – 2000 rpm 18 feed rates: 8 – 400 mm/min Bjdpfsv Uzztex Admodk Motor power: 2.2 kW Dimensions (approx.): W 1100 x D 1400 x H 1600 mm Weight (approx.): 1,100 kg Equipment • 3-axis digital readout ACU-RITE • Various collets • Accessory package as per photos All information subject to change without notice. A demonstration is possible at any time in our showroom.

Sąlyga: geras (naudotas), Gamybos metai: 1975, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets, milling arbors, and a tailstock. The machine is in good, operational condition and can be demonstrated under power by arrangement. Bodpfju Ezb Eox Admjdk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in Special Light Grey Finish, CE Compliant! Technical Data: - Year of manufacture: 1984 | Machine No.: 2203-1429 - Fixed angle table (newly planed) - Spindle speed: 50 – 2,500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1,300 mm/min - Travel (X/Y/Z): 500 / 400 / 400 mm - Vertical milling head on spindle support, adjustable by 150 mm - Vertical and horizontal quill – SK40 taper - Vertical quill extendable by 90 mm Bjdpfxow N Sfvj Admsdk - Drawbar system: M16 - Weight: approx. 1,500 kg Accessories & Equipment: - 3-axis Heidenhain digital readout - Coolant system - Chip tray - Central lubrication About the Machine: For sale is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, with minimal play in the handwheels and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine operates quietly. Rapid traverse is available in all axes, and all bellows are as new. The fixed angle table has been newly planed. This is a reliable and user-friendly machine. The oil has been changed and both mechanical and electrical systems have been checked. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power on site.

Sąlyga: paruoštas naudoti (naudotas), CNC frezavimo staklės, Deckel FP4NC, naudota įranga Gamintojas: Deckel Modelis: FP4NC Serijos numeris: 31549 Eiga pagal ašis: X ašis: 560 mm Y ašis: 500 mm Z ašis: 450 mm Stalo specifikacijos: Ilgis: 900 mm Plotis: 530 mm Maks. apkrova: 450 kg Padavimo greičiai: X ašis: 3600 mm/min Y ašis: 3600 mm/min Bodpfx Aowrdu Aodmedk Z ašis: 3600 mm/min Veleno specifikacijos: Veleno kūgis: ISO 40 / BT / MK Veleno galia: 7,5 kW Maks. apsukos: 5000 min⁻¹ (RPM)

Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 1990, Atsarginės dalys CNC frezavimo staklėms DECKEL FP5CC/T, 1990 m. gamybos. Atsarginės dalys: valdymas DIALOG 11, pilna valdymo spinta, vertikalus ir horizontalus frezavimo velenai ISO 40, universalus sukamas ir pasviręs stalas, įrankių magazinas su keitikliu, drožlių transporteriai, varikliai, ir kt. Prašome teirautis pagal poreikį. Bdsdpfx Adofgvu Uomok

Sąlyga: paruoštas naudoti (naudotas), Max. rotational speed: 2000 rpm, with operating manual. Bdodpfx Adslbmtgomok

Sąlyga: geras (naudotas), Gamybos metai: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good working and operational condition. Machine can be demonstrated under power by appointment. Bjdpjwg S Nkjfx Admjdk

Sąlyga: paruoštas naudoti (naudotas), Control: Deckel DIALOG 11E, tool is available, operating hours unknown, regularly maintained, on-site inspection possible. Bdodpfx Adopu A Ekemok

Sąlyga: geras (naudotas), Gamybos metai: 1980, Deckel FP1 Aktiv milling machine with 3 axes Heidenhain digital readout, tilting table. SK 40 spindle taper. Good, ready-to-operate condition and can be demonstrated under power by appointment. Bdodpfx Adowg S I Tsmok

Sąlyga: geras (naudotas), Gamybos metai: 1980, Deckel FP3 įrankinė frezavimo staklė su 3 ašių Heidenhain skaitmenine indikacija, standus stalas, SK 40 veleno tvirtinimas, priedai: įvairios spaustuvo įvorės ir frezos ašys, laikiklis. Geros darbinės būklės. Pagal susitarimą galima parodyti veikiančią. Bedpfxexdr Uxs Admjdk

Sąlyga: geras (naudotas), Gamybos metai: 1981, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 axes active, fixed table, SK 40 spindle taper, S20x2 spindle mount. Good, operational condition; can be demonstrated under power by prior arrangement. Bdodpouvgnqsfx Admsk

Gamybos metai: 1981, Sąlyga: geras (naudotas), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout and tilting table. SK 40 spindle taper. Good, fully operational condition. Machine can be demonstrated under power by appointment. Bdjdshg Embjpfx Admsk

Gamybos metai: 1980, Sąlyga: geras (naudotas), Deckel FP1 Aktiv milling machine with 3 axes Heidenhain digital readout, tilting table. SK 40 spindle taper. Good, ready-to-operate condition and can be demonstrated under power by appointment. Bdedpod Id N Rjfx Admok

Sąlyga: geras (naudotas), Gamybos metai: 1976, Deckel FP3 įrankinė frezavimo staklė su 3 ašių Heidenhain skaitmenine indikacija, staklės geros būklės. Standus stalas, SK 40 veleno kūgis, priedai: įvairūs įvorės ir frezavimo velenai, atrama. Gera darbinė būklė. Galima parodyti įjungtas pagal susitarimą. Bdodpfxexbx R Us Admek