Cilindrų Šlifavimo Staklės pirkti naudotą (49 556)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Hjdpfx Aow U Ry Nei Hou Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Hodjt Ii Nuspfx Ai Hju Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 1994, Technical details: Grinding diameter: 300 mm Grinding length: 600 mm Center height: 190 mm Z-axis: 865 mm X-axis: 250 mm Clamping length: 1000 mm Peripheral speed: 45 m/sec Grinding slide swivel range +/-: 8° Grinding wheel dimensions (width x diameter): 80 x 508 mm Workpiece spindle speed: 1 – 800 rpm Machine weight approx.: 5 t Machine with SIEMENS 840 C control - Coolant system - MARPOSS Hedpfx Asvgbzdji Hsu

Būklė: geras (naudotas), Gamybos metai: 2011, Maksimalus šlifavimo skersmuo – 290 mm, maksimalus šlifavimo ilgis – 800 mm, šlifavimo disko matmenys – 290 mm x 63 mm (vidinis skersmuo). Valdymo sistema – Fanuc 21i-TB, darbinio galvutės greitis – 1000 aps./min., Hjdpstudfdjfx Ai Hou veleno galia – 5 kW, stalo pasukimo kampas – +6/-3,5 laipsnio, darbinės galvutės pasukimo kampas – 0–90 laipsnių. vidinis veleno variklis – 1,5 kW. Įrengta aušinimo sistema.

Būklė: naudotas, Round grinder Center height 125 mm Center width 650 mm Grinding diameter 250 mm Grinding wheel diameter 400 mm Total power requirement 8 kW Weight approx. 2500 kg This is a machine from Machines4you Hjdpfx Aogfqn Nsi Hou

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, plotis centre: 1 200 mm, bendras svoris: 7 000 kg, X ašies eiga: 500 mm, Z ašies eigos atstumas: 800 mm, valdiklio modelis: Bosch Rexroth MTX, TECHNINĖS SPECIFIKACIJOS Atstumas tarp centrų: 1200 mm Maksimalus išorinis skersmuo: 350 mm Maksimalus apdirbamo detalės svoris tarp centrų: 50 kg Skersinis slankmatis, X ašis X ašies judėjimo diapazonas: 500 mm Maksimalus greitis: 30 m/min Skiriamoji geba: 0,1 µm Ilgasis slankmatis, Z ašis Z ašies judėjimo diapazonas: 800 mm Maksimalus greitis: 30 m/min Skiriamoji geba: 0,0005–0,1 mm Daugiafunkcinė galvutė, B ašis Hedpfezwm Akex Ai Hsu Pasukimo diapazonas: -45° iki +225° Pasukimo laikas 180°: < 3 s Pozicionavimo tikslumas: 0,0002° Pakartotinio pozicionavimo tikslumas: 1″ Skiriamoji geba: 0,001° Išorinis apdirbimas Maksimalus apdirbimo ilgis: 750 mm Perimetro greitis: 50 korundas / 80 CBN Variklio galia: 15 kW Maksimalūs šlifavimo disko matmenys: Ø 400 × 50 × 152,4 mm Vidinis apdirbimas Maksimalus skylės skersmuo: 250 mm Maksimalus skylės gylis: 235 mm Variklio galia S1: 1,8–7,5 kW Sūkių diapazonas: 30 000–50 000 aps./min. Apdirbimo spindelis, C ašis Maksimalūs sūkių skaičius: 1500 aps./min. Variklio galia: 1,8 kW Variklio sukimo momentas: 90 Nm Matavimo sistemos skiriamoji geba: 0,001° Apvalumo tikslumas: 0,8 µm Pozicionavimo tikslumas: 0,0001° Atraminis centras Centrinio kūgio judėjimo diapazonas: 50 mm / 80 mm Centrinio kūgio skersmuo: 60 mm Guolis: hidrostatinis Tikslus nustatymas cilindriškumo koregavimui: ± 40 µm 3 taškų atrama Skersmens diapazonas: 20–150 mm Apytikslis reguliavimas: 40 µm Tikslus reguliavimas: 2 µm Reguliavimo galimybės: nuolat STAKLĖS SPECIFIKACIJOS CNC valdiklis: Bosch Rexroth MTX Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 2850 x 2470 x 2290 mm Svoris: 7000 kg ĮRANGA 3 taškų atrama

Būklė: labai geros būklės (naudotas), Gamybos metai: 1969, BHU 40/1500 TOS Hostivar cilindrinis šlifuoklis Šlifavimo skersmuo: 400 mm Šlifavimo ilgis: 1500 mm Didžiausias ruošinio svoris: 300 kg Hjdpfezg H E Rsx Ai Heu Šlifavimo diskas: 600 x 150 mm Stalo išilgimas - X ašis: 1 - 1790 mm Šlifavimo galva pasukama +/- 45° Stalas pasukamas +/- 5° Veleno kūgis Morse 5 Didžiausias šlifavimo veleno apsisukimų skaičius: 1240 1/min / 2100 1/min Bendras galios poreikis: 22 kVA Staklių svoris apie 7000 kg Aušinimo sistema nepridedama prie priedų

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 2 500 mm, šlifavimo disko skersmuo: 600 mm, šlifavimo skersmuo: 450 mm, ruošinio ilgis tarp centrų: 2 500 mm, šlifavimo ratuko plotis: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025. The following work was carried out: - Inspection of the lubrication and hydraulic systems - Geometric alignment of all axes by table grinding and hand scraping of the guideways - Replacement of bearings - Inspection of the workpiece headstock - Inspection of the grinding wheel headstock - Inspection of the electrical system (conversion from fuse links to new circuit breakers) - Installation of a central emergency stop button on the control console - Installation of a work area lighting system - Machine cleaning - Replacement of way covers - Installation of a digital position indicator for the X-axis - Overhaul of the cooling system - Honing and replacement of cylinder seals - Refurbishment of the valve block TECHNICAL DETAILS Grinding length: 2,500 mm Grinding wheel diameter: 600 mm Grinding diameter: 450 mm Centre distance: 2,500 mm Workpiece diameter between centres: 450 mm Workpiece length between centres: 2,500 mm Grinding wheel width: 80 mm Feed travel Y-axis: 450 mm Feed travel Z-axis: 2,700 mm Mounting diameter: 305 mm Hedpfsy Sx Iqjx Ai Heu EQUIPMENT - Balancing device for grinding wheels - 2 steady rests - Dressing device - Complete DTR documentation - 2 grinding wheels: T1 600x80x305 A98 46K 9V/40 34527331

Būklė: dilaminuotas dirbtuvėje (naudotas), „KELLENBERGER UR 175 x 1500“ – tai apskritimo šlifavimo staklės, sukurtos siekiant užtikrinti didelį tikslumą, aukštą kokybę ir patikimumą. Darbiniai parametrai: maksimalus atstumas tarp centų – 175 mm, atstumas tarp centrų – 1500 mm; šlifavimo skersmuo – 340 mm, šlifavimo ilgis – 1500 mm; šlifavimo ratas – Ø400×50 mm, anga – 127 mm; stalo pakreipimo kampas – maks. 10°. Techniniai duomenys: šlifavimo rato sukimosi greitis – 4 režimai, 1500–3600 aps./min.; šlifavimo galvutė – pasukama 270°; ruošinio velenas – nuolat kintantis greitis, 20–400 aps./min., pasukamas 360°; stalo greitis – nuolat kintantis, iki 6 m/min.; šlifavimo veleno variklis – 4,0 AG; prijungimas – 50 Hz, 3x380 V; svoris – ≈2200 kg; matmenys – 3000×1750×1600 mm. Priedai: atraminis įtaisas su smulkiais reguliavimo mechanizmais, vidinis šlifavimo įtaisas, matavimo valdymo sistema, nivelymo įtaisas, magnetinis įtaisas – Ø230 mm, šlifavimo ratas su flanšu, lempa, atraminė įvorė. Leidžia pasiekti siaurus tolerancijos parametrus, tinkami itin tikslioms operacijoms. Hedpfxozv I Nce Ai Heu

Būklė: naudotas, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 175 mm - Travel (Z/X): 1050 x 275 mm - Max. feed rates (Z/X): 10 x 5 m/min - Grinding spindle head type: 2 external, 1 internal - Left external grinding wheel dimensions: 500 x 63 x 127 mm - Right grinding wheel dimensions: 400 x 63 x 127 mm - Grinding wheel motor power: 7.5 kW - Rotational speed: 1670 - 2110 rpm - Grinding spindle head orientation: -15 to +225° - Resolution: 0.001° - Workpiece headstock taper: MT5 - Workpiece headstock rotational speed: 1 - 1027 rpm - Workpiece headstock power: 0.785 kW - Tailstock: MT3 - Quill stroke: 35 mm - Weight: 7000 kg - Power-on hours: 47,959 h ACCESSORIES - Distance between centers: 1000 mm - Center height: 175 mm - Travel ranges (Z/X): 1,050 x 275 mm - Max. feed rates (Z/X): 10 x 5 m/min - Grinding headstock type: 2 external grinding wheels, 1 internal grinding wheel - Left external grinding wheel dimension: 500 x 63 x 127 mm - Right grinding wheel dimension: 400 x 63 x 127 mm - Grinding motor power: 7.5 kW - Rotational speed: 1670 - 2110 rpm - Grinding spindle head orientation: -15 to +225° - Resolution: 0.001° - Workpiece spindle head taper: Morse type 5 - Workpiece spindle head rotational speed: 1 - 1027 rpm - Workpiece spindle head power: 0.785 kW - Counter spindle: Morse type 3 Hjdpfx Asuhbyqji Heu - Quill stroke: 35 mm - Weight: 7,000 kg - Power-on hours: 47,959 h

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible Hodpfxet Ii Rre Ai Heu The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naujas, JAINNHER Universal Cylindrical Grinding Machine (SHU-321M / ШУ-321М) For sale: JAINNHER SHU-321M / ШУ-321М universal cylindrical grinding machine. Hsdpfxohwmhge Ai Hou New condition. Surplus stock. Quantity discounts available. If you are interested, please do not hesitate to contact us! APPLICATION Designed for precision grinding of external surfaces, faces, tapers, and internal grinding of high-precision cylindrical and conical parts. SPECIFICATIONS: Workpiece diameter Ø 0.025 – Ø 350 mm Distance between centers 750 mm Max. workpiece weight (kg): Between centers, 80 / In chuck, 20 Swivel angle of grinding head and carriage ±15° Standard grinding wheel dimensions: OD x Width x ID, 405 x 32-50 x 152.4 mm Spindle speed rpm: 1650/1850/2100 Longitudinal stroke length 250 mm Feed handwheel: One full turn (diameter) 2 mm One division (diameter) 5 microns Headstock spindle rotation: live/ dead center Swivel angle: Towards operator 30°/away from operator 90° Spindle speed (rpm), 6 steps at 50Hz: 50, 75, 100, 150, 200, 250 Center taper: MT4 / Tailstock quill taper: MT4 Through-hole diameter (mm) 25 / Tailstock quill diameter (mm) 32 Table swivel angle towards/away from operator: 4°/9° Table feed per revolution: 12.5 mm Feed rate mm/min: 50-4000 Internal grinding spindle speed attachment: 20,000 rpm Drive: Grinding head motor kW (HP) 0.75 (1) / Headstock kW (HP) 3.7 (5) Headstock auxiliary kW (HP) 0.4 (1/2) Grinding spindle lubrication pump kW (HP) 0.1 (1/8) / Coolant pump kW (HP) 0.2 (1/4) Tank capacities: Grinding head spindle oil tank l (gallons) 24 (6) Hydraulic tank l (gallons) 60 (15) / Coolant tank l (gallons) 80 (20) DIMENSIONS: 3560 x 1520 x 1650 mm Net weight approx. 2300 kg Included equipment and accessories: Grinding wheels Wear parts set (for 5,000 operating hours) Spare belts Set of fitters’ and assembly tools (toolbox) Diamond dresser for grinding wheels Internal grinding spindle Mandrel set for internal grinding Adapter flange for 3-jaw chuck 3-jaw chuck ø200 mm Complete list available on request for further information.

Būklė: reikia remonto (naudotas), TSCHUDIN HTG400 – skirtas naudoti kaip atsarginių dalių šaltinis. mechaniniu požiūriu mašina yra tvarkingoje būklėje, elektros sistemos būklę būtina patikrinti ir atlikti reikiamus remonto darbus. Hsdpfxjyt E Irj Ai Hju Varikliai veikia gerai. Mašina parduodama kaip atsarginių dalių šaltinis.

Būklė: naudotas, Cilindrische Schleifmaschine TSCHUDIN Typ HTG 400 Spitzenweite: 400 mm Spitzenhöhe: 100 mm Konus: MK4 Spindeldrehzahl: 70 bis 500 U/min Max. Tischweg: 420 mm Hedpfezww Iqex Ai Hju Tischschwenkung: 15° Schleifscheibe: Ø 300 mm Reitstock zurückziehbar MK3 Maschine 1995 von REWITECH SA (Schweiz) überholt Ausgestattet mit einem Absetzbehälter PHILIPS Spannung: 380 V Abmessungen (L x B x H): 2000 x 1400 x 1600 mm Gewicht: ca. 1,5 t

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Hodpfst Ii Rfjx Ai Hju Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Description to follow! Hodpfx Aijzd E Tzo Heu

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Vyniojimo staklės su įranga Hsdpfx Aijzg Hlwj Hou

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, centro aukštis: 525 mm, ruošinio svoris (maks.): 5 000 kg, šlifavimo ilgis: 4 000 mm, šlifavimo disko skersmuo: 1 060 mm, Mašina buvo modernizuota 2024 metais. Valdymas – Siemens Sinumerik 840D. Hjdpsw Ngm Usfx Ai Hou

Būklė: geras (naudotas), Šepečių apvalaus paviršiaus šlifavimo staklės, išorinio apvalaus šlifavimo staklės, vidinio apvalaus šlifavimo staklės, centravimo šlifavimo staklės, centro šlifavimo staklės, hidraulinės universalios apvalaus šlifavimo staklės, poliravimo staklės Hsdpog Uggtjfx Ai Hou -Gamintojas: WMW Heckert, hidraulinės universalios apvalaus šlifavimo staklės -Veleno variklis: VEB 0,8/1 kW / 1410/2840 aps./min. -Hidraulinė pavara: ADDA 0,75 kW -Centro aukštis: 270 mm -Maks. medžiagos skersmuo: perdarius Ø 320 mm -Šepetys: maks. Ø 250 mm -Atstumas tarp centrų: 420 mm -Matmenys: žiūrėti nuotraukas -Pastalinė spintelė: su gausia komplektacija -Išmatavimai: 1720/920/A1230 mm -Svoris: 790 kg

Būklė: geras (naudotas), Gamybos metai: 1972, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Fabr,Nr,35274, ruošinio svoris (maks.): 6 kg, šlifavimo ilgis: 250 mm, šlifavimo disko skersmuo: 300 mm, bendras plotis: 1 500 mm, bendras ilgis: 1 500 mm, šlifavimo skersmuo: 100 mm, ruošinio svoris tarp centrų: 6 g, įvesties srovės tipas: trifazis, ruošinio ilgis tarp centrų: 250 mm, šlifavimo ratuko plotis: 30 mm, bendras svoris: 1 500 kg, įėjimo dažnis: 50 Hz, įėjimo įtampa: 380 V, ruošinio veleno greitis (maks.): 1 350 aps./min, galia: 3,3 kW (4,49 AG), Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, sūkių greitis be galo kintamas, 1 hidraulinė išorinė apvalioji šlifavimo staklės Overbeck 350 R Pagaminimo metai: 1972 100 mm centrų aukštis x 350 mm centrų atstumas Ruoinio veleno stebulė MK 4 Pinolė MK2 Šlifavimo rato skersmuo 300x127x30 mm Hedpfjzc R Aaox Ai Hou Automatinis ciklas – greita eiga prieš automatinį pastūmą – kibirkščiavimo laikas, greita eiga atgal, Automatinis formavimas ir kompensavimas po nustatyto detalių skaičiaus, Techniniai duomenys nėra įpareigojantys – tarpinis pardavimas ir klaidos galimi;

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Hjdpfx Ajuxfupei Hsu Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding head swiveling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed in steps: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. (between centres, including clamping): 130 kg Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guideline Including new, modern and future-proof control system. Photo shown: Example of an already delivered machine with special options -The operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original controller, so no retraining is required. -Diagnostics function with display of PLC notifications and digital I/Os -Dressing function can be expanded or modified on request. -Spindle positioning of the workpiece spindle available on request. -New maximum infeed: 40 mm, can be extended on request. -Digital readout on 2 axes. X-axis resolution: 0.5µm Options: -Encoder with digital readout on workpiece headstock -Encoder with digital readout on grinding headstock (no height adjustment possible with spindle) -New robust internal grinding device, Ø80 mm or Ø100 mm -Increase of centre height up to 225 mm -Spindle speed control for grinding spindle Included: -Operating tools Hedeuxftrepfx Ai Heu -Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid table traverse. Versatile application possibilities in production for external and internal grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Gauging control The machine currently does not comply with the basic health and safety requirements as specified in BetrSichV 2015. The required minimum safety target must be determined by a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Hsdpfevdk N Ejx Ai Hou Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Būklė: naudotas, Gamybos metai: 2005, „Junker“ apvalaus šlifavimo staklės, modelis EJ 10 Hjdpeznx Hcefx Ai Hju Pagaminimo metai: 2005 Valdymo sistema: „Siemens 810“ Atstumas tarp centrų: 150 mm Centravimo įtaiso ašies aukštis: 100 mm Maksimali apdirbamo gaminio masė: 5 kg Maksimalus šlifavimo disko skersmuo: 400 mm Maksimalus šlifavimo disko plotis: 63 mm Šlifavimo disko kiaurymė, „JUNKER“ veleno prisegimo vieta: 27 mm Pasiūlymas skirtas tik įmonėms, vykdantiesioms komercinę veiklą, kaip nurodyta BGB §14.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle display Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Includes: - Operating tools Hjdpsuxftxjfx Ai Hsu - Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.