Cilindrinio šlifavimo staklės - Universalios

KELLENBERGER UR175-1000 BEMA STEP

Būklė: geras (naudotas), Gamybos metai: 2014, Spindle speeds: 170 – 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m Cedpfx Afsw Intao Ajgt --> Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data – Grinding diameter: 20 – 300 mm --> Swing diameter: 350 (500) mm --> Workpiece length: 300 (1,300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 – 9.99 m/min --> Infeed speed: 0 – 99.99 m/min --> Step infeed value during reversal: 0 – 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 – 5 m/min / revolution --> Infeed speed: 0 – 99.99 m/min / revolution --> Step infeed value during reversal: 0 – 0.999 mm / Ø --> Swiveling capability of the workpiece spindle head: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Cjdpfx Afouxft Ej Asgt Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, TECHNICAL DATA - Distance between centres: 650 [mm] - Centre height: 175 [mm] - Max. workpiece weight between centres: 80 [kg] - Travel X/Z axis: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swivel range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Minimum resolution: 2.5 [degrees] - Internal grinding speed: 40,000 [rpm] - Power: 3 [kW] WORKHEAD - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore diameter: 30 [mm] - Minimum C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill stroke: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 20 [kVA] WEIGHT AND DIMENSIONS Cedpfx Afeylc R Uo Ajgt - Footprint: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] EQUIPMENT - Control: FANUC Oi-TD - Electronic handwheel - 3-color status lamp - Oil mist extraction system - Direct position measuring systems axes: X / Z - Dynamic grinding wheel balancing: MPM - Automatic touch detection: SENSITRON 6 - Fixed dressing device - Workpiece probe system - Coolant tank: 375 [l] * with paper filter

Būklė: naudotas, TECHNINIAI DUOMENYS - Velenų skaičius : 2 - Ašių skaičius : 2 PAGRINDINIS VELENAS - Veleno sukimosi greitis : 6500 [aps/min] - Maks. strypo skersmuo : 42 [mm] - Maks. apdirbamas skersmuo : 120 [mm] - Minimali C ašies skiriamoji geba : 0,1 [laipsniai] PRIEŠINGAS VELENAS - Veleno sukimosi greitis : 6500 [aps/min] - Maks. strypo skersmuo : 42 [mm] - Minimali C ašies skiriamoji geba : 0,1 [laipsniai] ELEKTROS TIEKIMAS - Maitinimo įtampa : 230 [V] - Bendra galia : 7,5 [kW] SVORIS IR MATMENYS - Užimamas plotas : 5.400 x 1.900 [mm] - Staklių aukštis : 2.000 [mm] - Staklių svoris : 5.000 [kg] DARBO VALANDOS - Įjungimo valandos : 33.912 [val.] - Darbo valandos : 21.069 [val.] PRIEDAI - Valdymas : FANUC 160i - Aušinimo skysčio bakas - Drožlių transporteris - Detalių išėmimas - Detalių konvejeris Cjdpfx Afsu E U Ufo Aogt

Būklė: naudotas, Gamybos metai: 2007, Sūkių skaičius 8000 /min Svoris 5500 kg Pagaminimo metai 2007 Valdymas Siemens 840D Cgedpfx Ajwm Rqaof Ast Matmenys (Ilgis/Plotis/Aukštis) 3600 x 2800 x 2400 mm Eigos ilgis - x 1035 mm Eigos ilgis - y 560 mm Eigos ilgis - z 510 mm Yra daugiau nuotraukų

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Price / details on request. All technical details are subject to errors or omissions. Cgedpfxol Tn Afj Af Aet We sell exclusively to countries within the European Community.

Būklė: geras (naudotas), Gamybos metai: 2000, 20 000 U/min, Cgjdpfx Asr Urm Sof Aot Werkzeugvermessung auf dem Tisch wird mitgeliefert, Von Hand gezeigte Teile werden nicht mitgeliefert.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, ruošinio svoris (maks.): 130 kg, šlifavimo ilgis: 1 500 mm, šlifavimo disko skersmuo: 500 mm, bendras plotis: 2 155 mm, bendras ilgis: 5 465 mm, bendras aukštis: 1 700 mm, šlifavimo skersmuo: 300 mm, šlifavimo ratuko plotis: 63 mm, Apvali šlifavimo staklės buvo generališkai suremontuotos 2021 m. ir nuo to laiko beveik nenaudotos. Staklių būklė – praktiškai kaip nauja. Codjx A Dfyspfx Af Aegt Komplektacija kaip nuotraukose. Staklės prijungtos prie elektros tinklo ir jas galima bet kada apžiūrėti pagal susitarimą. Techniniai duomenys: Šlifavimo diametras: 300 mm Šlifavimo ilgis: 1500 mm

Būklė: geras (naudotas), Gamybos metai: 2014, centro aukštis: 180 mm, plotis centre: 600 mm, šlifavimo skersmuo: 260 mm,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, X-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm Column clearance 2500 mm Clamping area 3000 x 2000 mm Workpiece weight 10,000 kg Spindle speeds 5–6000 rpm Gear stages 2 Drive power – milling spindle 45 kW Distance milling spindle – clamping spindle 3500 mm Spindle torque 1250 Nm Tool changer 200 positions Tool diameter 135 / 250 mm Maximum tool weight 50 kg Maximum tool length 400 mm Tool holder ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angular milling head yes Automatic tool clamping yes Ball screw spindles yes Guideway covers yes Coolant system yes High-pressure cooling system (internal cooling) yes Fully enclosed work area yes Portal machining center with tool changer system and second table plate. Csdpsvwgmmofx Af Asgt