Centrinis šlifavimo staklės 320 x 1000 mm

Henninger ZS 201

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, excellent, like new, no signs of wear, including new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross-slide: 190 mm Cross-slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Carriage travel length: 350 mm Bed width: 205 mm Tool cross-section (height x width): 20 x 20 mm Isdpfox I Rtkjx Aausia Height from top slide to spindle centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear steps: 1 Number of speeds: infinitely variable Number of feeds: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight without packaging and accessories approx. 1150 kg Dimensions (L x W x H), net: 1720 x 890 x 1700 mm Headstock / rear cover / sliding safety guard: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. Isdjuxft Ejpfx Aauoia -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2010, Pallets: 2 Number of Axles: 4 pcs. Tool Holder: HSK 63 Tool Magazine Capacity: 60 Weight: 9,600 kg Spindle Speed: 18,000 rpm Coolant Filtration System: Yes Chip Conveyor: Yes Iedpjqn A Rksfx Aausia

Būklė: naudotas, Gamybos metai: 2016, Technical details: Iijdpoudf Evjfx Aausa Weight: 22 t

Būklė: naudotas, Gamybos metai: 2005, Krumnelinio rato šlifavimo staklės Reishauer RZ150 Iisdpfx Aoxz E Srjausa

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 12 000 kg, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 1 080 mm, stalo skersmuo: 1 200 mm, X ašies padavimo greitis: 3 m/min, Y ašies padavimo greitis: 500 m/min, padavimo greitis Z ašis: 3 m/min, įėjimo srovė: 195 A, ruošinio skersmuo (maks.): 1 600 mm, frezos veleno ilgis: 450 mm, stalinis gręžtuvas: 400 mm, veleno greitis (min.): 250 aps./min, bendras svoris: 51 000 kg, galia: 115 kW (156,36 AG), Įranga: dokumentacija / vadovas, Liebherr high-performance gear hobbing machine LC1502 in good condition Control system: Liebherr LH90 V4, drives by Bosch Rexroth Isdpfowqm A Tex Aausia Extensive accessories such as BHG, cooling unit for lubricant and coolant, extraction system, arbor shafts, various software packages/parameter extensions and complete documentation. We can also assist with installation and commissioning through to production, according to effort!

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Iodjl Tn Afjpfx Aaueia Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Price / details on request. All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Grinding area: 2000x900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle center: 845 mm, magnetic chuck dimensions: 2000x800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500x100x203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. An on-site inspection is possible. Iiodpfeuyk N Iex Aauea

Būklė: geras (naudotas), Gamybos metai: 2014, Spindle speeds: 170 – 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data – Grinding diameter: 20 – 300 mm --> Swing diameter: 350 (500) mm --> Workpiece length: 300 (1,300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 – 9.99 m/min --> Infeed speed: 0 – 99.99 m/min --> Step infeed value during reversal: 0 – 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 – 5 m/min / revolution --> Infeed speed: 0 – 99.99 m/min / revolution --> Step infeed value during reversal: 0 – 0.999 mm / Ø --> Swiveling capability of the workpiece spindle head: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø Isdpfxsw Intas Aauoia --> Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988