Cilindrinė šlifavimo mašina

Studer S30-12 rondslijper

Būklė: visiškai atnaujintas (naudotas), Pilnai renovuotas Studer apvaliosios šlifavimo staklės. Atstumas tarp centrų – 650 mm. Techniniai duomenys ir priedai pagal nuotraukas ir PDF. Hsdjxxy A Tepfx Aftofh

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 540 mm, Z ašies eigos atstumas: 850 mm, veleno greitis (maks.): 1 500 aps./min, sukimosi skersmuo virš skersinio stumduko: 1 000 mm, bendras ilgis: 2 510 mm, bendras aukštis: 3 546 mm, bendras plotis: 4 155 mm, X ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 20 m/min, tekėjimo aukštis: 825 mm, tvirtinimo skersmuo: 1 000 mm, ruošinio skersmuo (maks.): 1 100 mm, bendras svoris: 16 000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Travel: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X-axis: 500+40 mm - Z-axis: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 - Maximum workpiece weight (including chuck): 1250 kg Turret: - Number of positions: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X - Z: 20 - 20 m/min - X-axis ballscrew: Ø50 x 8 mm - Z-axis ballscrew: Ø50 x 8 mm Motors: - Spindle motor: 37 - 45 kW - Motorized tool motor: 7 kW - X - Z axis servomotors: 4 - 7 kW General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16,000 kg INCLUDED ACCESSORIES: - CNC control 0i-TF Plus (15'') Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, ethernet, and USB outputs - Belt-driven spindle, 1500 rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Supplied without chuck - Servo-assisted BMT turret, 12-position, ready for driven tools - Chip conveyor - High-pressure pump 15 BAR - Three-color warning and end-of-cycle lamp - Machine integrated work light - Support feet - Tool box with service wrenches - Air blow system through spindle - Upgraded turret motor for driven tools - from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) Hfedpfjyxg N Aox Aftsh - Pressure release (dual pressure) - Renishaw M.T.P. manual tool presetting - Oil skimmer - Static tool holder kit - Pre-arrangement for fume extraction unit - Black color NEW MACHINE READY FOR IMMEDIATE DELIVERY

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Hfsdpfjvca Izsx Afteh Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, Technical details: Hjdou Ng Dgepfx Aftefh Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm Hfsdpfjqt Dmyex Afteh - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Price / details on request. Hsdol Tn Afepfx Aftsfh All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Būklė: naudotas, Gamybos metai: 1963, Technical details: Hsdpfevkpu Hex Aftefh Maximum wheel diameter: 900 mm Maximum module: 10 Machine weight approx.: 8,200 kg Maximum hob diameter: 190 mm Maximum cutter length: 320 mm Cutter speeds (infinitely variable): 13-80 rpm Maximum workpiece length: 750 mm Maximum workpiece diameter: 150 mm LIEBHERR Gear Hobbing Machine L 900 Counter support for cutter arbor missing

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Viršūnės aukštis: 175 mm Iš dalies renovuotas įrenginys su matavimo protokolu pagal naujos staklės tolerancijas NAUJA Eckelmann ENC valdymo sistema su BEMA šlifavimo programine įranga Skaitmeniniu būdu valdoma B ašis Vidinio šlifavimo įrenginys, skersmuo 80 mm Hfodpfxjyatx Ss Afteh Kairėje šlifavimo diskas, skersmuo 400 mm Dešinėje šlifavimo diskas, skersmuo 300 mm Vidinio šlifavimo velenas HJN 828 Hidraulinis grąžtas Mikroreguliavimas KEL SET matavimo sistema

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 119/020.0895, Gamybos kilmė: CH Įtampa: 400V Matmenys: 2700x2350x2100 mm Grynoji masė: 4500 kg TECHNINIAI DUOMENYS Hfedslbgfcjpfx Aftjh Valdymas: Fanuc 16i-T Centrų aukštis: 175 mm Atstumas tarp centrų: 1000 mm LINIJINĖS AŠYS Šlifavimo ilgis: 500 mm Eigos ilgiai: X: 267 mm; Z: 650 mm ŠLIFAVIMO VERPETUVAS Besisukantis be pakopų: +/- 8,5° Šlifavimo disko matmenys išorėje: 500x80x203 mm Galia: 7,5 kW Greitis: 44 m/sek. DETALĖS LAIKYMO VERPETUVAS Kūgio tipas: MK5 C ašis: +/- 5° Galia: 1 kW Sukimosi dažnis: 30–1000 min⁻¹ PRIEŠINKŪGIS Kūgio tipas: MK3 Pinolės eiga: 35 mm Pinolės skersmuo: Ø 50 mm Maks. ruošinio svoris: 130 kg ELEKTROS TINKLAS Įtampa: 400V 50 Hz Techniniai duomenys pateikiami tik informaciniais tikslais, galimi netikslumai ar klaidos.