Biesse Fse pirkti naudotą (317)

Būklė: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels Hodpfxsd Tyvxe Ahgep - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11

Būklė: labai geros būklės (naudotas), Electronic Programmer NC 400 Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling units (qty.) 2 Hjdelwqrtjpfx Ahgsp Drilling heads per horizontal drilling unit (qty.) 2 Spindles per horizontal drilling head (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling units (qty.) 6 Drilling heads per lower vertical drilling unit (qty.) 2 Upper vertical workpiece clamps (qty.) 4 Continuous chip extraction screws (qty.) 2 Digital position readout (axis) Total connected load (kW) 27.7 The CNC control operates the movement (X-axis) of the horizontal drilling units. The CNC control operates the movement (Y-axis) of the stops. The CNC controls the movement (Z-axis) of all vertical drilling units.

Būklė: labai geros būklės (naudotas), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edging material (edge) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Hjdpfx Aou Tg Uqehgjp Working width (min/max) mm: 240 – 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam spacing (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling): AS 10 (5.8 kW) - 2 x Chipper DT 10 (5.8 + 5.8 kW) - Spray system (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt Glue + Pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (No. 6 positions) - End trimming unit IT 90-S (0.3 kW x2) 28 m/min, 0 - 25°, PNEUMATIC - Multi-profile milling unit (CNC controlled) RF 30 (0.65 kW x2) 0 - 25° - Multifunctional unit (radius milling and contour milling unit) AR 80 (0.3 kW x2) 25 m/min – ROTAX - Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraping unit (CNC controlled) RB 30 Flat scraper unit RC 20 – spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x2) With 'hopper' for panels (usable height mm 80), serves as buffer to accelerate work cycles

Būklė: labai geros būklės (naudotas), Longitudinal panel saw (splitter) for grooving and/or cutting a single panel into two parts Hjdpfxju Tqb Ue Ahgop - Min. panel length: 500 mm - Max. panel length: 2700 mm - Min. panel width: approx. 300 mm - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Total installed power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw blade (separator/ splitter blade) (7.4 kW), max. diameter 350 mm

Būklė: labai geros būklės (naudotas), Complete factory for furniture production, consisting of: KZ2207) "BIESSE" FDT – CNC drilling and dowel-inserting line, comprising: Depalletizing station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel-inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) 4-sided sizing and edge-banding line "HOMAG", comprising: Depalletizing double stations "ESSE2", 1st double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", loading double stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vector CNC LINE for Drilling, Milling, and Inserting, comprising: Hedgehog loader (18 positions), CNC Vector GLR 30-13, Vector XL 40-30, Idrak-3, various transfer units KZ2090) Sanding machine (veneer sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with destacking-feed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with continuous case clamp KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter/rip saw) with destacking "ESSE2" KZ2009) Veneer department (double-knife veneer pack cutter "MONGUZZI", crosscutting shear "MONGUZZI"; splicing machine "KUPER", veneer bundle cutter "TAGLIABUE", etc.) Hodpfoh T Dvtox Ahgjp KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminated panels KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelves (wall racks), forklifts, pallet trucks, and much more. The machines are still installed at the user's site and can be viewed by appointment.

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Hjdpfjt N Ix Rex Ahgjp Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and soundproof cabin Manual side adjustment of unit carrier Cam pitch (mm): 500 SIZING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW) 2 x hoggers DT 10 (5.8 + 5.8 kW) Spraying device (for liquid anti-adhesive) EDGEBANDING SECTION (for each side): Gluing unit (hot-melt glue + premelter) SP30 (High Melt + Edge Control EC 40) Edge pressure section (CNC controlled). Edge magazine for rolls (No. 6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°. PNEUMATIC Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multifunction unit (radius and form milling unit) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool changer (tools) 2 universal milling units for grooving, rebating, and profiling FB 30 (5 kW x 2) 0 - 90° Hedpfxehvahhj Ahgsp Multi-profile scraper unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 Hedshvah Nepfx Ahgep C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Būklė: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC MACHINING CENTER Mobile table (workpiece), movable machining head - Vertical table (workpiece) Control system: TPA - Software: Albatros Safety enclosure for the machining head Workpiece feed with transport chain Rubber rollers for securing the workpiece during feed and machining Infeed table (with conveyor belt) - Outfeed table (with conveyor belt) With automatic workpiece return system to the operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (quantity): 1 Hjdpjihfiiefx Ahgsp Independent vertical drilling spindles (quantity): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (quantity): 2 Independent horizontal drilling spindles (quantity): 36 (9+9 = 18 x 2) Motor power, drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) quantity: 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer system, turret - Magazine positions: 10 tool stations

Būklė: labai geros būklės (naudotas), Dvipusė mašina, kurią galima pastatyti linijoje po pervaromą daugiašpylių gręžtuvą, skirtą automatiniam gręžimo ir kaiščių įstatymo ciklui. - Elektroninis programuotojas „CNI" NC 400 - Integruota valdymo ir elektros spinta - Didžiausias atstumas tarp horizontalių galvų: apie 3200 mm - Judama ir reguliuojama mašinos dešinė pusė (pagal plokščių plotį) - 2 vnt. motorizuotų transporterių juostų (po 0,25 AG kiekvienai, iš viso 2 varikliai) - 1+1 kaiščių talpyklos automatiškam jų padavimui į antgalius - 6+6 horizontalūs įstatymo antgaliai (klijų įpurškimo ir kaiščių įstatymo įrenginiai) - Aukšto slėgio klijų padavimo sistema Hedpfxsw Ug A Ho Ahgjp - Bendra instaliuota galia: apie 5 kW.

Būklė: labai geros būklės (naudotas), CNC-controlled flexible automatic through-feed boring line for milling, drilling, and dowel inserting Hjdsyhqa Ajpfx Ahgsp Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Driven roller conveyor "RBO" with 90° workpiece rotation device B) Gantry CNC-controlled through-feed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: No. 2 electrospindles ISO 30 (each 4.5 kW) with tool changer, each holding 3 tools Zone B: No. 2 pre-installed locations for mounting No. 2 additional electrospindles No. 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles on Y-axis) No. 2 tool magazines (turret) with 60 positions each for spindles (2 x 60 = total 120) C) Transfer connection with flipper (180° turn, face-down) "RBO" Ribaltatore D) Gantry CNC-controlled through-feed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal boring units (1 right + 1 left) with 4 heads each, with 18 spindles per head (36R+36L), total 72 Zone A: No. 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, each with 3 positions Zone B: No. 2 pre-set positions for installing No. 2 additional electrospindles No. 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles on Y-axis) No. 2 tool turret magazines with 60 positions each (2 x 60 = total 120) E) "BIESSE" RD dowel insertion unit No. 2 horizontal boring units (1 right + 1 left) with 5 insertion nozzles each (5LH + 5RH), total 10 nozzles F) Dust extraction and cleaning machine "WANDRES"

Būklė: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); Hedot Ig A Sjpfx Ahgep - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Būklė: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° Hodpeukhd Ajfx Ahgep 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Būklė: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT Hodpfsvnq Txsx Ahgep - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Būklė: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Hedpsidqd Tofx Ahgep Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Būklė: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 Hedpfxeidqf Re Ahgsp The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Būklė: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Hodpfei D D Tfsx Ahgop Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Hodpfx Ahou Rc Anogop Cam Pitch (mm): 500 FORMATTING UNIT (for each side): - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2)

Būklė: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Hedpfxju Rc Hyj Ahgep Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Būklė: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports Hedpfxjhvi Due Ahgjp CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Būklė: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 Hedpfxoidmkro Ahgsp KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)

Būklė: labai geros būklės (naudotas), Spalt- und Nutenfräsmaschine (gebraucht zur Herstellung von Nuten und/oder zum Teilen eines einzelnen Paneels in zwei Teile) - Minimale Werkstücklänge: ca. 250 mm - Maximale Werkstücklänge: ca. 2700 mm - Minimale Werkstückbreite: ca. 124 mm - Maximale Werkstückbreite: ca. 1200 mm - Werkstückdicke (min./max.): ca. 10 / 60 mm - Maximale Vorschubgeschwindigkeit: ca. 50 m/min - Gesamtinstallierte Leistung: 82 kW Ausgestattet mit folgenden Aggregaten: POS. 1 Unteres Vorschneidaggregat (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 2 Oberes Vorschneidaggregat (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 3 Unteres Vorschneidaggregat (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 4 Oberes Vorschneidaggregat (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm Hjdeyx S N Uopfx Ahgep POS. 5 Unteres Hauptsägenaggregat (Rotax-Elektrospindel 11 kW), max. Sägeblattdurchmesser ca. 450 mm POS. 6 Oberes Hauptsägenaggregat (Rotax-Elektrospindel 11 kW), max. Sägeblattdurchmesser ca. 450 mm OPTIONAL: Schall- und Sicherheitskabine

Būklė: nepatikrintas (naudotas), Gamybos metai: 1999, Funkcionalumas: nepatikrintas, 24 vertikalios ašys, 10 horizontalios ašys, 7 vietų įrankių keitiklis, 8 vakuuminiai darbastaliai su skaitmeniniu padėties rodmeniu, keičiamas kampinis reduktorius. Darbo stalo naudingoji ilgis: 3200 mm, plotis: 925 mm. Hodpfjx Iulwjx Ahgjp

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Briaunos storis: nuo 0,4 iki 5 mm Ruoinio storis: nuo 10 iki 60 mm Padavimo greitis: 12 m/min. Ruoinio storis: 10-60 mm Briaunos medžiagos aukštis: 14-64 mm Ritininės briaunos storis: 0,4-3 mm Juostinės briaunos storis: 0,4-5 mm Išankstinio frezavimo agregatas RT02 Klijavimo agregatas SP03 Kirtimo agregatas IT03 Baigiamojo frezavimo agregatas FR02 Kampų kopijavimo agregatas AR02 Grandymo agregatas RB02 Paviršiaus grandytuvas RC02 Poliravimo agregatas SZ02 Hedpfx Aexh Spkjhgep Purškimo įrenginys anti-lipnumo priemonei ADZ02 AirForce sistema P1 Hibridinis klijavimo agregatas EVA ir PU granuliuotiems klijams NC klijų tiekimo reguliavimas EVA/PU hibridiniam klijavimo galvai Adaptivi infraraudonųjų spindulių lempa ADIRL700 aukščiausios kokybės užtikrinimui, ypač PU klijavimui NC ašių paketas! Nesting rinkinys (Nuotrauka yra simbolinė!)

Būklė: naujas, Gamybos metai: 2022, Travel distances (X, Y, Z): 3100 x 2205 x 170 mm Number of vertical drilling spindles: 0 pcs. Number of horizontal drilling spindles: 0 pcs. Hedpfxoxfwdus Ahgep Number of tools: 14 pcs. Extraction nozzle diameter: 200 mm Number of milling units: 1 pc. Year of manufacture: 2022 Speed: 24,000 rpm Compressed air connection: 7 bar Motor power: 9 kW Pump capacity: 2x 250 m³/h Control system: BH660 CNC machining center BIESSE Rover PLAST K 2231 FT – NEW MACHINE / STOCK MACHINE, originally packed! Working area: X: 3100 mm Y: 2205 mm Z: 170 mm Safety system: FullBumper – accessible from all sides, no safety fence required Vacuum system with 8 zones 2x 250 m³/h vacuum pumps 9 kW 3-axis milling spindle Prepared for retrofitting a C-axis (4th axis) No drilling head! Movable side tool changer with 14 positions Air-Jet cooling system (Images are for illustrative purposes only!) ORIGINALLY PACKED NEW MACHINE! New machine warranty! Installation, training, service: By authorized BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels