5 ašių apdirbimo centras

BIESSE + KUKA ROVER A + KR210 R3100

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. Hedpfoqt Dmyjx Alwst When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008377, Darbo sritis X ašis: 3390 mm Darbo sritis Y ašis: 1570 mm Darbo lygis: Su vakuuminėmis konsolėmis Pagrindinio veleno galia: 13 kW Valdomų ašių skaičius: 4 ašys Hodpjx Swb Aofx Alwot Gręžimo velenų skaičius: 32 Įrankių vietų skaičius: 10

Būklė: naudotas, CNC apdirbimo centras BIESSE Rover C 6.50 CONF.2, 2007 metai Darbo zona: apie 140 × 460 cm Staklių matmenys: 300 × 650 cm Svoris: apie 6 100 kg Dvi darbinės galvos Įrankių sandėlis: 22 pozicijos Vertikalūs gręžimo velenai: 28 vnt. Horizontalūs gręžimo velenai: 12 vnt. Hjdpsw Rpd Sefx Alwst Kaina derinama, galima iškart. Kaina nurodyta be PVM.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, rankos pasiekiamumas: 1 300 mm, Veikimo nuotolis: 1300 mm Keliamoji galia: 12,5 kg Svoris: 33,5 kg Tipas: MSIP-REM-URK-UR10 Hjdew N N Dcjpfx Alwjt Pagaminimo metai: 2018 Serijos numeris: S300711 Lorch S5 RoboMIG XT Cobot-suvirinimo įrenginys 400 A suvirinimo aparatas.

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Hodpfogwbbqex Alwst Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: labai geros būklės (naudotas), CNC MACHINING CENTER (POINT-TO-POINT) – 4 Axes Gantry-type design Power Control – woodWOP software Safety enclosure for the operating head Clamping table with 6 consoles Safety tread mats LASER system on X-axis for console positioning and on Y-axis for vacuum clamp positioning Automatic tool change system 2 disc-type tool changers – magazine/tool positions: 8 rear + 8 lateral Maximum working area (X – Y – Z) mm: 3130 x 1250 (1550) x 100 (150) 2 working areas – 1 x vacuum pump (capacity 70 m3/h) Chip conveyor Separate electrical control cabinet Total connected load: 32 A WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 on X-axis + 2 on Y-axis) Drilling head motor power (kW): 2.3 1 grooving saw unit, diameter 125 mm, N1 – swivels 90° in X-Y direction Hedpfx Aloyxn Tiswet 1 vertical main spindle (milling unit) HSK 63: 9 kW OPTION: Drilling and milling unit with 4 horizontal spindles (cross spindle) BARCODE READING SYSTEM – PROFESSIONAL PACKAGE

Būklė: naudotas, Gamybos metai: 2005, No. 3256 CNC Automatic Pallet Production Line Sysmathick RPA9 + Stacker Used, year of manufacture 2005, already dismantled System for joining wooden components by nailing from above and below The RPA9 is a machine with circulating chains designed for producing pallets in standard dimensions using four templates (maximum 1600 x 1400 mm LxW) Operation via touchscreen Format change in just a few minutes Two programming options: - Digital programming via PC (inputting coordinates) - Manual programming via touchscreen Storage capacity for tens of thousands of products Automatic regulation of spacing between nailing heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top: 3x N58 & 3x N400; bottom: 3x N80) High nailing frequency (a row with three nails per second) Capable of nailing multi-layered pallets thanks to pneumatic cylinders on the heads Pneumatic clamping of boards during assembly Minimum pallet dimensions: 600 x 300 mm (LxW) Maximum pallet dimensions: 1600 x 1400 mm (LxW) Maximum template size: 1700 x 1600 mm (LxW) Maximum nailing capacity: 1600 x 1400 mm (LxW) Maximum pallet height: 190 mm Hedpfx Alsx Dddxowjt Minimum pallet height: 110 mm Machine throughput capacity: 60 - 200 pallets/hour Sale on behalf of a customer, ex-stock near 51371 Leverkusen, without disassembly, transport and installation Disassembly, loading and transport by us available as an option Subject to errors in description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and highly recommended Sale as-is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No guarantee or warranty is provided for used machinery. The principle applies: “purchased as inspected” Images and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT; payment before collection or dispatch Delivery terms: ex location

Būklė: naudotas, Gamybos metai: 2014, Nr. 01 apdirbimo centras Homag Weeke Mod. BMG 111/45/12/K Naudingo darbo laukas su elektrovārpstu 4500 x 1550 mm Hjdpjyarwtefx Alwst Naudingo darbo laukas su visais agregatais 4500 x 1250 mm Gręžimo galva su 12 vertikalių gręžtuvų, 4 + 2 horizontalių, pjūklo blokas 0/90 Elektrovārpstas 9 kW 12 AG HSK, sukimosi greitis nuo 1250 iki 24000 aps./min 4 ašies agregatų pasukimas 8 pozicijų apvalus įrankių keitiklis 8 pozicijų šoninis įrankių keitiklis Šoninė pick-up įrankių keitimo stotis Specialus FLEX 5 HIGH PERFORMANCE agregatas – gręžimas, frezavimas, pjovimas Automatinis nuolydžio reguliavimas 0–100 Drožlių transportavimo įrenginys išmetimas į dešinę 8 Schmalz darbo stalai, 16 vakuuminių kaladėlių Vakuuminių kaladėlių pozicionavimo lazeris 2 vakuuminės pompos POWERTOUCH valdymas Woodwop DXF importas Teleservicenet pagalba Atitinka CE reikalavimus 2014 metų gamyba

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Marke: Holz Her Modell: PRO-MASTER 7123K Seriennummer: 527/0-705 5010147 Baujahr: 2007 - 2 HSK-Aufnahmen inklusive, sowie verschiedene Bohrer für das Bohraggregat - Lieferung mit mehreren Saugern und diversen Ersatzteilen Hodjrz Irropfx Alwot Technische Daten: 4-Achsen (C-Achse) 6 Konsolen Motorische Verstellung der Konsolen Anzahl vertikaler Bohrspindeln: 24 Anzahl vertikaler Bohrspindeln in X-Richtung: 10 Anzahl vertikaler Bohrspindeln in Y-Richtung: 8 Abstand der Bohrzentren: 32 mm Horizontales Doppelhohraggregat in X: 2 Horizontales Doppelhohraggregat in Y: 1 Abstand der Zentren: 64 mm Bearbeitungsbereich: 3200 x 1260 mm Max. Verfahrweg: X = 3866 mm, Y = 1650 mm, Z = 325 mm Werkstückdurchlasshöhe für Werkzeugwechsel-Spindel mit HSK 63F Werkzeugaufnahme: 345 mm Max. Bearbeitungsdicke/Einschubhöhe (Anschlag hinten): 175 mm Max. Werkstückgröße für Vertikalbohrungen: X = 3730R / 3460L mm, Y = 1570 mm Max. Werkstückgröße für Horizontalbohrungen X: X = 3450R / 3370L mm, Y = 1315 mm Max. Werkstückgröße für Horizontalbohrungen Y: X = 4760R / 3300L mm, Y = 1385 mm Max. Werkstückgröße für Kantenbearbeitung, abzüglich Fräserradius (Werkzeug 25 mm Durchmesser x 125 mm, HSK): X = 3510R / 3525L mm, Y = 1445 mm, Z = 280 mm Max. Werkstückgröße für Nuten in X (Mitte Nutwerkzeug ca. 120 mm): X = 3300R / 3760L mm, Y = 1585 mm Max. Werkstückgröße für Nuten in Y (Mitte Nutwerkzeug ca. 120 mm): X = 3200R / 3860L mm, Y = 1485 mm Max. Verfahrgeschwindigkeit X-Achse: 100 m/min Max. Verfahrgeschwindigkeit Y-Achse: 100 m/min Max. Verfahrgeschwindigkeit Z-Achse: 25 m/min Max. Verfahrgeschwindigkeit C-Achse: 60 m/min Motorleistung Bohraggregat: 3 kW Motorleistung Säge: 1,5 kW Motorleistung Elektrospindel mit Spannsystem: 6 kW Drehzahl Elektrospindel: 1000–18000 U/min Anschlussleistung: 22 kW, 50 Hz, 400 V, 3-phasig Druckluft: Betriebsdruck 6,0 bar, max. zulässiger Druck 8,0 bar Luftbedarf: 300 l/min Absaugleistung: ca. 5300 m³/h Absaugstutzendurchmesser: 250 mm Abmessungen: Länge mit Schaltschrank: 6420 mm Gesamtbreite: 3760 mm Höhe mit Absaughaube: 2475 mm Gewicht: 4200 kg Software: Programm: Campus NC-HOPS Betriebssystem: Microsoft Windows Grafikvarianten-System mit HOP- und CAD/CAM-Funktionalitäten Zur Erstellung von Variantenteilen mit Makrotechnologie Programmbedienung Windows-konforme Oberflächengestaltung und Benutzerführung Makro-/Variantenprogrammierung Anzeige- und Simulationsmodi Export- und Importmöglichkeit zu verschiedenen Branchenprogrammen Interaktionsmöglichkeiten mit einer Vielzahl von Branchenprogrammen Lager-Nr.: 2002061BXA Irrtümer und technische Änderungen vorbehalten.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, CNC Machining Centers Rover Multi Up M C S Working area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on operating conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece clearance *: Y = 1900 mm Axis travel distances *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Vacuum system divided into 2 working areas and 2 clamping zones along X. AUXILIARY VACUUM SYSTEM – 2 zones Enables clamping of workpieces via vacuum templates. Remote control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool changer and the 12-position lateral tool magazine. The tool magazines can also be retrofitted. Uninterruptible power supply (UPS) for the machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminum workpiece supports. The supports are guided via linear guides with recirculating ball bearing blocks. Clamping is performed at the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated in 15° steps on the module carriers; ideal solution for shaped components. — 18 sealing plugs for module carriers without template. SA work table (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each table and along the X axis of the working area. — Indication of direction and achieved position for the carriage during positioning phase, mounted on each table The system, according to the programming of the tables, suggests to the operator the movement direction for each table and carriage, confirming the position reached with a green LED and a beep with an accuracy of +/- 1.5 mm. Subdivision of pneumatic system into 2 working areas along X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange prepared for mounting a 5-axis machining unit for aggregate installation. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side-mounted tool magazine with 12 positions integrated in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Hedpfxjy Ehrxe Alwot Tool holder HSK F63, equipped with a long integrated flange, for saw blades on 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Comprising the following 9 items Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1 license WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -