Bernardo Kf 20 L Super pirkti naudotą (214)

Būklė: naujas, Turning length 1000 mm Turning diameter 420 mm Swing diameter over bed slide 255 mm Turning diameter in the gap 580 mm Spindle bore 52.0 mm Spindle speed 30-550 / 550-3000 rpm Bed width 250 mm Spindle mount 55029 D 1-6 Tailstock taper 4 MT Quill stroke 140 mm Total power requirement 5.5 kW Machine weight approx. 1145 kg Dimensions L-W-H 2090 x 1050 x 1600 mm The universal lathe Smart 410 Pro Vario is suitable for light and medium-duty turning operations. Even the basic configuration includes all essential accessories (3-jaw chuck, steadies, change gears, 3-axis digital readout, etc.), making this machine universally applicable. Furthermore, this model is equipped with an infinitely variable spindle speed up to 3000 rpm, allowing the speed to be optimally adjusted to the workpiece and feed rate. Features: - Standard with Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load - Infinitely variable speed control - The set speed is shown on a digital display - Prism bed made of cast iron, inductively hardened and precision ground - Central, user-friendly feed and thread selection with lead and feed shaft - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency inverter and 3-axis digital readout - Hardened and ground gears and shafts, also in the feed gearbox - Simple and precise speed and feed adjustment - Smooth and accurate gear shifting - Moveable tailstock for taper turning - Handwheel with adjustable fine graduation (0.02 mm) - Removable bridge allows machining of large-diameter workpieces Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Face plate 350 mm - Fixed steady - max. Ø 135 mm - Travelling steady - max. Ø 65 mm - Foot pedal with brake function according to CE - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency inverter - First fill with Shell Tellus 46 - Coolant device - Slip clutch Godpjxaakyjfx An Hokc - Threading dial - LED machine lamp - Change gears - Reducing sleeve - 2x centre points - Chip guard - Operating tools

Būklė: naujas, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 350 - 1,590 mm Max. workpiece height: 645 - 1,240 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 980 x 1,600 mm Thread cutting: M42 Quill stroke: 320 mm Total power requirement: 4.0 kW Machine weight approx.: 3,500 kg Dimensions (LxWxH): 2,450 x 980 x 2,840 mm Description Godpfsxaad Tex An Hekc - Large-dimensioned base plate - Ideal for machining large workpieces - Thick-walled, precision-ground column for improved sliding properties of the arm - Boom and drill head with independent hydraulic clamping - Easy height adjustment of the boom via lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears running in oil bath - Excellent sliding performance of the drill head on the boom due to ground surface Scope of delivery - Cube table - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant device - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable protective cover

Būklė: naujas, Turning length 1500 mm Swing diameter 410 mm Swing diameter over cross slide 255 mm Swing diameter in gap 580 mm Spindle bore 52.0 mm Spindle speed 30 - 3000 rpm Bed width 250 mm Spindle mount 55029 D 1-6 Tailstock taper 4 MT Quill travel 120 mm Total power requirement 5.5 kW Machine weight approx. 1400 kg Dimensions (L x W x H) 2530 x 1000 x 1450 mm Features: - Equipped as standard with Delta frequency inverter - Delivers high torque in the low speed range - Nearly constant speed under load - Infinitely variable speed control - Set speed is displayed digitally - Prism bed made of grey cast iron, inductively hardened and precision-ground - Central, easy-to-use control for feeds and threading - Equipped with leadscrew and feedscrew - Modern main spindle bearing arrangement with precision angular contact ball bearings - Supplied with frequency inverter and 3-axis position indicator as standard - Hardened and ground gears and shafts, also in the feed gearbox - Simple construction for speed and feed adjustment - Smooth and precise switching - Adjustable tailstock for taper turning - Handwheel with adjustable fine graduation (0.02 mm) - Removable gap bridge allows machining of workpieces with large diameters Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Face plate 350 mm - Fixed steady rest - max. passage diameter 135 mm - Follow rest - max. passage diameter 65 mm - Foot pedal with brake function according to CE - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency inverter - Initial fill with Shell Tellus 46 - Coolant system - Slip clutch - Thread dial indicator - LED machine lamp - Change gears Gkodpfsxaaldex An Hoc - Reducing sleeve - 2 center points - Chip guard/rear wall - Operating tools * Images show identical machine model.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Drilling and milling machine FM 55 HSV equipped with motorized height adjustment of the milling head and automatic spindle feed. The standard configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, coolant device, LED work light, grey cast iron base with coolant channel, CE-compliant safety devices), making the machine highly versatile. Standard equipment includes automatic spindle feed and a tapping mode Fast X-axis table adjustment thanks to automatic traverse with rapid feed function Cast iron machine base ensures vibration-free operation Increased productivity thanks to the standard 3-axis position display 2-speed motor with 12 selectable speeds (75 - 3200 rpm) Versatile applications, e.g., slot milling, face milling, boring, etc. Milling head tilts to both sides for angle drilling, edge milling, etc. Solid dovetail guideways ensure headstock stability Dovetail guideways on X, Y, and Z axes, adjustable via gib strips Comfortable milling head height adjustment by electric motor Manual central lubrication for all guideways Technical specifications: Maximum drilling capacity: 32 mm Maximum drilling capacity in cast iron: 40 mm Maximum face mill diameter: 80 mm Max. spindle/column distance: 220 mm Spindle/table distance: 95 - 485 mm Quill travel: 120 mm Automatic spindle feed range: (3) 0.10 / 0.18 / 0.26 mm/rev Minimum spindle speed: 75 rpm Maximum spindle speed: 3200 rpm Number of speed steps: 12 Spindle taper: MT 4 Table size (width): 800 mm Table size (depth): 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Headstock vertical adjustment: 390 mm Headstock tilt: -60° to +60° T-slots (number, size): 14 mm Lifting motor power (headstock): 90 W Main motor power: 1.5 / 2.2 kW Main motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions (width): 1270 mm Dimensions (depth): 960 mm Dimensions (height): 2120 mm Weight approx.: 447 kg Scope of delivery: 3-axis digital readout ES-12V LCD Keyless drill chuck 3 – 16 mm / B 16 Drill chuck arbor MT 4 / B 16 Spindle M 16 Reduction sleeve MT 4/3 Combined arbor for milling cutters MT 4/27 mm Automatic quill feed Adjustable height safety guard Motorized milling head lift Central lubrication system X-axis power feed AL 450 D LED work lamp Electronic speed display Electronic quill travel indicator Tapping mode Safety lamella guard Coolant system Gjdpeytdy Tsfx An Hskc Longitudinal scale Cast iron base with coolant system Service tools

Būklė: naujas, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle taper ISO 40 ISO Table: 1370 x 300 mm Feed rate: 30-830 / 23-625 mm/min Spindle speed: 45 - 1660 rpm Distance spindle / table 60 - 460 mm Rapid traverse Z axis 750 mm/min Overhang 95 - 575 mm Total power requirement 3.0 kW Machine weight approx. 1505 kg Dimensions L-W-H 1740 x 1860 x 1900 mm The universal milling machine UWF 110 Servo is suitable for performing light and medium-duty milling tasks. Thanks to its great versatility and simple conversion options, it is successfully used in workshops for machining small and medium-sized series. Distinctive features of this machine are the swiveling worktable, the box ways in the y- and z-axes, and servo drive for feeds and rapid traverse on all axes. - Large-dimensioned box ways on y- and z-axes - ensure increased stability - 8x automatic feeds and rapid traverse on all axes Gjdpsxaak Tjfx An Hekc - driven by servomotor - Universal milling head system "Huron", adjustable to any angular position - Swiveling control panel with ergonomically placed switches - Heavy machine base made of cast iron for vibration-free operation - High running smoothness thanks to hardened gears running in an oil bath - Overarm with clearly arranged gearshift for spindle speed changes - Digital position indicator for x-, y- and z-axes included in delivery - Precisely ground cross table with T-slots Scope of delivery: - 3-axis digital readout ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Power feed for x-, y-, and z-axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combi shell end mill arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for x-, y-, and z-axes - Operating tools

Būklė: naujas, max. cutting capacity mild steel 6.5 mm ST 40 max. cutting capacity stainless steel 3.5 mm VA Angle adjustment stepless from - to 90° Blade length 250 x 250 mm Table: 810 x 750 mm Working height 950 mm Motor power 4.0 kW Weight 630 kg Dimensions (L x W x H): 810 x 750 x 1150 mm Features: - Notching with burr-free cuts, no deformation of cutting edges - Cutting blades made of surface-hardened tool steel - Operated via foot pedal, leaving both hands free to handle the workpiece - Large dimensioned worktable with integrated scales - T-slots for precise guidance of swiveling stops Gedpfxoxcux Dj An Hekc - Safety cover in front of the cutting blade for high safety Scope of delivery: - 1 set of cutting blades - 2 swiveling material stops - Plexiglas safety cover - Foot pedal with emergency stop

Būklė: naujas, Maks. pjovimo galia paprastam plienui 3,0 mm ST 40 Maks. pjovimo galia nerūdijančiam plienui 2,0 mm VA Kampas reguliuojamas be pertraukų nuo - iki 90,0 laipsnių Godpfx Asxcuxkon Hskc Peilio ilgis 130 x 130 mm Stalas: 640 x 460 mm Darbinis aukštis 900 mm Variklis pneumatinis Svoris 200 kg Išmatavimai I-P-A 600 x 670 x 1270 mm Savybės: - Pjovimas be atplaišų, nedeformuojant pjovimo briaunų - Mašinos korpusas iš aukštos kokybės ketaus, stovas iš plieno lakšto - Pjovimo peiliai iš paviršiaus grūdinto įrankinio plieno - Lengvas darbas dėl pneumatinės pavaros - Valdymas pėdų pedalu, abi rankos laisvos ruošiniui - Didelis darbinis stalas su integruotomis skalėmis - T-grioveliai tiksliam pasukamų atmušėjų vedimui - Peilio apsauga saugumui užtikrinti Komplektacija: - 1x pjovimo peilių komplektas - 2x pasukami medžiagos atmušėjai - Apsauginis dangtis iš plexiglaso - Pėdų pedalas - Stovas

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įrankio skersmuo: 32 mm, sukimosi greitis (maks.): 3 200 aps./min, sukimosi greitis (min.): 75 aps./min, stalo plotis: 500 mm, stalo ilgis: 455 mm, bendras svoris: 340 kg, Įranga: CE žymėjimas, The GB 35 HSV bench drill is a professional machine designed for drilling in metal, wood, and plastics. It features a high spindle speed (75 - 3200 rpm) and comprehensive equipment to ensure precision and productivity. Motor power: 1500 W; automatic spindle feed; tilting drill table; coolant system; and LED work light. Standard equipment includes automatic spindle feed, a robust base plate for processing large workpieces, a 2-range motor with 12 speeds up to 3200 rpm, and a quick-action chuck 3 - 16 mm / B 16. The large drill table is equipped with T-slots (14 mm). Speed change is simple and quick via a lever. Precise operation is ensured by ground gear wheels in the transmission. Feed function is changed via a clutch. The right/left run system allows for thread tapping. The head tilts 180˚ and rotates 360˚. Coolant system and LED lighting included in delivery scope. Technical specifications: Maximum drilling capacity: 32 mm Gkedpfx Aoytft Ien Hoc Drilling capacity in cast iron: n/a mm Maximum thread cutting: M20 Drill chuck: 1 – 16 / B 16 mm Spindle taper: MK 4 Spindle speed min.: 75 rpm Spindle speed max.: 3200 rpm Speed change - number of gears/stepless: 12 Drive transmission: gear Automatic spindle feed - range: 0.10 / 0.18 / 0.26 mm/rev Table tilting: -45° to +45° Drill head tilting: 180° and 360° Max. distance spindle/column: 295 mm Max. distance spindle/table: 775 mm Max. distance spindle/base plate: 1185 mm Quill stroke: 125 mm Column diameter: 115 mm Table size - width: 500 mm Table size - depth: 455 mm Base plate work surface: 375 x 365 mm T-slots (number, size, spacing): 14 mm Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions - width: 630 mm Dimensions - depth: 700 mm Dimensions - height: 2050 mm Weight approx.: 340 kg Scope of delivery: Quick-action drill chuck 1 - 16 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3 Guard Service tools Digital depth display Coolant system LED lighting

Būklė: naujas, Drilling capacity in steel (diameter): 25.0 mm Throat depth: 255 mm Gjdpfx Aoxaa Daen Hskc Drilling stroke: 120 mm Morse taper: 3 MT Speed range: 105 - 2900 rpm Table size: 395 x 420 mm Column diameter: 100 mm Maximum tapping capacity: M10 Operating voltage: 400 V / 50 Hz Weight: 140 kg Dimensions (L x W x H): 500 x 570 x 1100 mm Description: - Digital quill travel display for convenient operation - Drill head rotatable 360° and height-adjustable - Large, heavy-duty drill table with T-slots - Helical-geared transmission for optimum power transfer - Forward/reverse switch for tapping operations - Precision quality ball bearings ensure high concentric accuracy - Stable, precision-ground steel column designed for heavy-duty use - High efficiency and smooth running due to helical gears - Combination of steel and reinforced fiber material - 8 selectable speeds via powerful 2-stage drive motor Features: - Quick-action drill chuck 1–16 mm / B 16 - Drill chuck arbor MT 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Forward/reverse feature - Height-adjustable safety guard

Būklė: naujas, Turning length: 1500 mm Swing diameter: 560 mm Gsdpfxoxaau Ej An Hjkc Swing diameter over support: 350 mm Spindle speed: 25-220/220-1500 rpm Swing diameter over cross slide: 350 mm Swing diameter in gap: 785 mm Quill stroke: 185 mm Spindle bore: 105.0 mm Motor power: 7.5 kW Spindle mount: DIN 55029 D 1-8 Quill taper: 5 MT Machine weight approx. 2,420 kg Dimensions (LxWxH): 2840 x 1150 x 1610 mm Description: - Equipped as standard with Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load - Infinitely variable speed control, the set speed is displayed digitally - Versatile applications in general mechanical engineering, production, one-off manufacturing, etc. - Removable gap bridge enables machining of workpieces with large diameters - Standard with rapid traverse longitudinally and transversely to reduce idle times - Modern main spindle bearing with high-precision angular contact bearings - The machine bed, cast in one piece, is extremely torsion-resistant and low in vibration - Tailstock can be offset for taper turning - Central lubrication for the carriage Equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest – max. workpiece diameter 180 mm - Follow rest – max. workpiece diameter 120 mm - Foot pedal with CE-compliant braking function - Safety device for quick-change tool post - LED machine light - Initial fill with Shell Tellus 46 - Face plate 450 mm - 2 centers - Frequency inverter - Digital speed display - Slip clutch - Rapid traverse longitudinally and transversely - Coolant system - Quick-change tool post with 4 holders - Change gears - Reducing sleeve - Chip guard - Service tools

Būklė: naujas, Turning length 1000 mm Turning diameter 420 mm Swing diameter over bed carriage 255 mm Turning diameter in the gap 580 mm Gjdpfx Anexaavve Hekc Spindle bore 52.0 mm Spindle speed 45 - 1800 rpm Bed width 250 mm Spindle mount DIN 55029 D 1-6 Tailstock taper 4 MT Quill travel 140 mm Total power requirement 3.0 / 4.5 kW Machine weight approx. 1220 kg Dimensions L-W-H 2070 x 900 x 1600 mm The Smart 410 Pro universal lathe is suitable for performing light and medium-duty turning operations. The basic configuration already includes all essential accessories (3-jaw chuck, steadies, change gears, etc.), making the machine highly versatile. To reduce production times, this model comes standard with a 3-axis digital readout. Features: - Prism bed made of grey cast iron, induction-hardened and precision ground - Electromechanical foot brake to reduce non-productive times - Central, easy-to-use feed and thread control via leadscrew and feed rod - Modern main spindle bearing with precision angular contact ball bearings - Large-dimensioned, hardened and precision ground gears - Hardened and ground gears and shafts, including in the feed gearbox - The speed and feed settings are straightforward, smooth and precise - Adjustable tailstock for taper turning - Handwheel with adjustable fine scale (0.02 mm) - Removable bridge allows machining of workpieces with large diameters Equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Face plate 350 mm - Fixed steady - max. passage diameter 135 mm - Travelling steady - max. passage diameter 65 mm - Coolant system - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread dial indicator - Motor with magnetic brake, CE-compliant - Foot pedal with brake function, CE-compliant - Initial fill with Shell Tellus 46 - LED machine lamp - Change gears - Reducing sleeve - 2 centres - Chip guard - Operating tools - Operating manual

Būklė: naujas, Turning length 1,500 mm Swing diameter 420 mm Swing diameter over bed slide 255 mm Swing diameter in gap 580 mm Spindle bore 52.0 mm Spindle speed 45 - 1,800 rpm Bed width 250 mm Spindle mount DIN 55029 D 1-6 Tailstock taper MK 4 Quill travel 140 mm Gsdpfx Aexab Umen Hskc Total power requirement 3.0 / 4.5 kW Machine weight approx. 1,400 kg Dimensions (LxWxH) 2,570 x 900 x 1,600 mm The Smart 410 Pro universal lathe is suitable for performing light and medium-duty turning work. The standard equipment already includes all essential accessories (3-jaw chuck, steadies, change gears, etc.), making this machine universally applicable. To reduce production times, this model comes standard with a 3-axis digital readout. Features - Prism bed made of cast iron, induction-hardened and precision-ground - Electromechanical foot brake to minimize ancillary times - Central, user-friendly controls for feeds & threads via lead screw and feed shaft - Modern main spindle bearings with precision angular contact ball bearings - Large-dimension, hardened and precision-ground gears - Hardened and ground gears and shafts, including in the feed gearbox - Simple, smooth, and precise adjustment of speeds and feeds - Movable tailstock for taper turning - Handwheel with adjustable fine scale (0.02 mm) - Removable bridge allows machining of large-diameter workpieces Standard equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Face plate 350 mm - Fixed steady – max. Ø 135 mm - Travelling steady – max. Ø 65 mm - Coolant system - Four-way tool post - Safety guard for four-way tool post - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread dial indicator - Motor with CE-compliant magnetic brake - Foot pedal with brake function (CE) - Initial filling with Shell Tellus 46 - LED machine lamp - Change gears - Reducing sleeve - 2 centre points - Chip guard at rear - Service tools - Operating manual

Būklė: naujas, Turning length: 1000 mm Swing diameter: 350 mm Swing diameter over gap: 450 mm Spindle bore: 40.0 mm Spindle speed: 70–2000 rpm Bed width: 180 mm Spindle mount: 55029 D 1-4 Tailstock taper: MT 3 Quill travel: 110 mm Total power requirement: 1.5 kW Machine weight approx.: 529 kg Dimensions (L x W x H): 1730 x 700 x 1340 mm Features: - Standard equipped with Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load - Infinitely variable speed control; set speed is shown on a digital display - Ideal for technical colleges, repair workshops, and training centers Gjdpsw U U R Sefx An Hokc - Modern precision main spindle bearings with angular contact ball bearings - Single-lever clamping for tailstock, adjustable for taper turning - Hardened and ground gears and shafts in gear head - Optimally suited for machining steel, non-ferrous metals, and plastics - Removable gap bridge for machining workpieces with large diameters - Massive prism bed additionally ribbed to minimize vibration influences - Spindle speed and feed adjustment are simply designed, easy and precise to operate Scope of delivery: - 3-axis i200 digital readout with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed steady rest – max. pass-through diameter 60 mm - Travelling steady rest – max. pass-through diameter 60 mm - Clamping plate 250 mm - Four-way tool post - Shaft locking device - Safety device for tool holder - Slip clutch - Micrometer longitudinal stop - Coolant system - Extendable chip tray - Frequency inverter - Foot pedal with brake function according to CE - Splash guard - Thread dial indicator - LED machine lamp - Digital speed display - Reducing sleeve - Change gears - 2 centers - Machine base - Operating tools

Būklė: naujas, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 360 mm Drilling stroke: 225 mm Morse taper: 4 MT Table size: 570 x 480 mm Tapping capacity in steel: M 42 Speed range: 50–316 / 316–2200 rpm Feed: 0.08 – 0.50 mm/rev Column diameter: 180 mm Max. distance spindle/table: 580 mm Max. distance spindle/base plate: 1185 mm Total power requirement: 3.0 kW Weight: 630 kg Dimensions (L x W x H): 1020 x 750 x 2340 mm The GB 55 NC Vario geared column drilling machine comes as standard with stepless speed control, allowing the cutting speed to be optimally adjusted to the workpiece. Thanks to its heavy, robust construction, it is especially suited for professional users in machine building and workshops. Features - All settings are made directly via the large touchscreen display - As standard with motorized table height adjustment - 6x automatic drilling feeds, selectable via electromagnetic clutch - Hand-scraped drilling table made of solid cast iron, swivels from -45° to +45° - Ground base plate with T-slots - Suitable for clamping particularly tall workpieces Gjdpfxoxacc Sj An Hskc - Guaranteed concentricity accuracy = 0.02 mm, measured in the quill - Automatic tool ejector and tapping device as standard - High running smoothness thanks to ground gears running in an oil bath - Stable, ground steel column designed for heavy-duty use Scope of delivery - Geared drill chuck 1–13 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Reducing sleeves MT 4 / 3, MT 4 / 2, MT 3 / 1 - Motorized table adjustment - Coolant system - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Tapping device - Initial filling with Shell Tellus 46 - LED machine lamp - Digital speed display - Digital drilling depth display - Height-adjustable safety guard

Būklė: naujas, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle mount ISO 40 Table: 1370 x 320 mm Feed: Horizontal 80 - 830 / Vertical 23-625 mm/min Spindle speed: Horizontal 35 - 1500 / Vertical 45 - 1660 rpm Distance spindle / table (H) 30 - 430 / (V) 210 - 610 mm Rapid traverse Z-axis 750 mm/min Overarm reach 305 - 805 mm T-slots 3 x 14.0 mm Table tiltable ° Max. workpiece weight 300 kg Coolant pump 25.0 L/min Total power requirement 7.6 kW Godpfx Anjxaagnj Hjkc Machine weight approx. 1540 kg Dimensions L-W-H 1840 x 1830 x 2050 mm The universal milling machine UWF 130 Servo is an advancement of the well-known UWF 130. With its "HURON" milling head, which can be set to any angular position, and an x-axis travel of 1000 mm, this machine is highly versatile. A distinctive feature of this model is the rapid traverse and the 8-step feeds in all axes, driven by a servo motor ("SERVO" version). - Large-sized box ways in y- and z-axis for increased stability - 8 automatic feeds and rapid traverse on all axes, servo motor-driven - Universal "Huron" milling head, adjustable to all angular positions - Swiveling control panel with ergonomically arranged switches - Heavy, grey cast iron machine base for vibration-free operation - High smoothness of operation thanks to ground, oil-bath lubricated gear wheels - Overarm with clearly arranged gearbox for spindle speed selection - Digital position display for x, y, and z-axis included - Precision ground cross table with T-slots Scope of delivery - 3-axis digital readout ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Power feed for x, y, and z-axis - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combination arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for x, y, and z-axis - Operating tools

Būklė: naujas, x-travel: 600 mm y-travel: 250 mm z-travel: 400 mm Spindle mounting: ISO 40 Gedpfxsxaa Hze An Hekc Table: 1120 x 260 mm Feed rate: 24 - 402 mm/min Spindle speed: 45 – 1660 rpm Distance spindle/table: 175 – 520 mm Rapid traverse Z-axis: 660 mm/min Projection: 0 – 550 mm Total power requirement: 2.2 kW Machine weight: approx. 1380 kg Dimensions (LxWxH): 1570 x 1470 x 1660 mm The universal milling machine UWF 110 is suitable for performing light to medium-duty milling operations. Thanks to its high versatility and straightforward retooling, it can be effectively used in workshops for machining small to medium batch sizes. Equipment: - Universal milling head, adjustable to all angular positions - Swivelling control panel with ergonomically positioned switches - Heavy machine base made of cast iron for vibration-free operation - Dovetail guideways with adjustable gibs on all 3 axes - High running smoothness thanks to ground, oil-bath-lubricated gearwheels - Positioning motor for Z-axis included in delivery - Standard automatic table feed on x- and y-axis - Precisely surface-finished cross table with T-slots - Digital position display for x-, y- and z-axis included Scope of delivery: - 3-axis digital readout ES-12 H with LCD display - LED machine lamp - Coolant system - Central lubrication - Counter bearing - Long milling arbor 32 mm - Feed for x- and y-axes - Positioning motor for z-axis - Coolant tray - Adjustable safety guard - Operating tools

Būklė: naujas, Turning length 1500 mm Swing diameter 560 mm Gkodpfxjxaam Is An Hec Swing diameter over support 350 mm Spindle speed 25 - 1600 rpm Swing diameter over bed slide 350 mm Swing diameter in gap 785 mm Quill travel 180 mm Spindle bore 105.0 mm Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Quill: 5 MT Machine weight approx. 2,370 kg Dimensions L-W-H 2,840 x 1,150 x 1,460 mm Description: - Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. - A removable bridge enables machining of large-diameter workpieces - The speed and feed settings are straightforward, smooth-running, and precisely switchable - Includes four adjustable cams for automatic bed slide shutdown - Standard with rapid traverse longitudinal and crossfeed to reduce non-productive times - The machine bed is a single-piece casting, extremely torsion-resistant and low-vibration, providing essential conditions for accurate turning - Modern main spindle bearing with precision angular contact ball bearings - Tailstock with fine scale, adjustable for taper turning - Central lubrication system for the bed slide Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Face plate 450 mm - Fixed steady rest – max. diameter 180 mm - Follow rest – max. diameter 120 mm - 2 centers - Initial fill with Shell Tellus 46 - Motor with electromagnetic brake according to CE standard - Foot pedal with braking function according to CE - Coolant system - Quick-change toolpost with four inserts - Guard for quick-change toolpost - Overload clutch - LED machine light - Change gears - Reducing sleeve - Chip guard - Operating tools

Būklė: naujas, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis digital readout Special accessories: Multifix toolpost head, 3 straight holders, 1 prism holder (factory assembly, €672.00 net, not included in the price) Centre distance: 1000 mm Centre height: 200 mm Gedpfxsgd Iagj An Hjkc Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Tailstock quill diameter: 45 mm Tailstock quill travel: 100 mm Tailstock taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, as per DIN 55029 • Fixed steady rest – max. pass-through diameter 90 mm • Travelling steady rest – max. pass-through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Four-way toolpost • Safety device at four-way toolpost • Slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 live centers • Foot pedal with brake function (CE compliant) • Motor with magnetic brake (CE-standard) / operator tools Special accessories: Multifix toolpost head, 3 straight holders, 1 prism holder (factory assembly; price: €672.00 net, not included in the price)

Būklė: naujas, Turning length: 1,000 mm Turning diameter: 360 mm Swing diameter over bed slide: 220 mm Turning diameter in gap: 502 mm Spindle bore: 52.0 mm Speed range: 70 – 2,000 rpm Bed width: 185 mm Spindle mount: 55029 D 1-5 Tailstock taper: MT 3 Quill travel: 100 mm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 575 kg Dimensions (L x W x H): 1825 x 750 x 1600 mm Features: - Solid prism bed with additional ribbing to minimize vibration - Standard with 52 mm spindle bore for machining large shaft diameters Godpexaaz Eefx An Hjkc - Ideally suited for machining steel, non-ferrous metals, and plastics - Removable gap bridge for machining large-diameter workpieces - Space-saving installation with front pull-out chip tray - Simple, smooth, and precise speed and feed adjustment - Electromechanical foot brake to reduce non-productive time - Modern precision main spindle bearing with angular contact ball bearings - Prism bed made of cast iron, induction-hardened and precision-ground - Guaranteed spindle nose runout accuracy (≤ 0.009 mm) - Main spindle hardened and ground, running in oil bath - Adjustable tailstock, headstock, and guideways - Tailstock can be offset ±5 mm for taper turning Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. pass-through diameter 70 mm - Traveling steady rest – max. pass-through diameter 60 mm - Coolant system - Initial fill with Shell Tellus 46 - Extendable chip tray - Mounting plate 280 mm - Four-way tool post - Safety guard for four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine light - Reducing sleeve - Change gears - 2 centers - Foot pedal with braking function to CE standards - Motor with magnetic brake according to CE standards - Base with drawers - Operating tools

Būklė: naujas, Sheet thickness: 1.20 mm Throat depth: 270 (140) mm Roller center distance: 60.0 mm Total installed power: manual drive Machine weight: approx. 46.0 kg Space requirements: approx. 600 x 250 x 500 mm Description: - 4 pairs of beading and flanging rollers included - Suitable for efficient production of various beading types Gksdjxabmcopfx An Hsc - High accuracy thanks to precision-bedded shafts - Lower shaft with adjustable stop - Robust cast iron construction in a modern design - Extended application range with 8 additional, optional roller pairs available - Upper shaft adjustable Scope of delivery: - 4 pairs of beading and flanging rollers - Workpiece stop - Roller spanner

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, valdymo tipas: NC valdymas, automatizacijos lygis: pusiau automatinis, pavaros tipas: mechaninis, darbinis plotis: 1 360 mm, plieno lakšto storis (maks.): 3 mm, galinis atmušas: 750 mm, valdymo įtampa: 400 V, bendras svoris: 1 240 kg, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, apsaugos šviesos užtvara, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, Standard equipment includes a sheet holding device, making it ideal for thin sheets. Front support arms facilitate handling of large panels. The motorized back gauge ensures precise positioning via ball screws. A clearly arranged control panel with integrated control system. Robust all-steel construction ensures vibration-free operation. Support table with rectangular stop on both sides. High operator safety thanks to a protective guard and rear light barriers. Double-edged knives made of high-quality steel guarantee clean, burr-free cuts. Automatically operating sheet clamping device. Technical specifications: - Cutting length: 1360 mm - Maximum sheet thickness (mild steel): 3 mm Gjdpfx Ansyt Ia Rs Hjkc - Cutting angle: 2° 30′ - Strokes per minute: 31 - Working height: 810 mm - Back gauge: 0–750 mm - Table width: 390 mm - Motor power: 3 kW - Voltage: 400 V - Dimensions (width): 1930 mm - Dimensions (depth): 2100 mm - Dimensions (height): 1260 mm - Weight (approx.): 1240 kg

Būklė: naujas, Column Drilling Machine Bernardo BM 32 SB Maximum drilling capacity: 32 mm Drill chuck: 1 – 16 mm / B 18 Morse taper: MK 4 Gkjdpfx Anod Tccho Hjc Spindle speed: (12) 150 – 2450 rpm Throat depth: 255 mm Swiveling drill table: 360° Maximum distance spindle / table: 750 mm Distance spindle / base plate: 1210 mm Quill stroke: 120 mm Column diameter: 92 mm Table size / T-slot size: 385 x 335 mm / 14 mm Base plate working area: 380 x 335 mm Motor output (S1 100%): 1.1 kW / 400 V Motor input (S6 40%): 1.6 kW / 400 V Machine dimensions (W x D x H): 450 x 800 x 1730 mm

Būklė: naujas, Drilling capacity in steel (diameter): 40.0 mm Thread cutting: M30 Workpiece height – max.: 380 – 785 mm Arm reach: 985 mm Spindle taper: MT4 Gksdpexaadysfx An Hec Drill head swivels right/left: -80 / +80 degrees Table surface: 1210 x 520 mm Speed range: 50 – 2000 rpm Column diameter: 220 mm Table surface: 1210 x 510 mm Quill stroke: 200 mm Feed range – spindle: 0.08 – 0.50 mm/rev Total power requirement: 2.2 kW Machine weight approx.: 2,800 kg Space requirements approx.: 2450 x 1200 x 2720 mm Features - Numerous clamping and machining options thanks to the design-specific construction - Electro-motorized height adjustment of the drilling head without altering the drilling position – ideal for deep-hole drilling - Drilling head swivels 180°, arm slides forward and backward, and is horizontally pivotable - Thread cutting device and 6 automatic feed rates included as standard - Large-dimensioned work table surface (1195 x 500 mm) for simultaneous clamping of multiple workpieces - Digital speed and drilling depth display included in delivery - Quick setup of the drilling head on the workpiece, clamping is achieved hydraulically - Strongly ribbed column ensures high rigidity of the arm - Solid construction enables vibration-free operation - Comes standard with electronically variable speed control Scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electro-motorized drill head adjustment - Initial fill with Shell Tellus 46 - Quick-action drill chuck 1 – 13 mm / B 16 - Drill chuck arbor MT4 / B 16 - Reducing sleeves MT4 / 3, 4 / 2, 3 / 1 - Thread cutting device - LED machine lamp - Coolant system - Height-adjustable protective cover

Būklė: naujas, Drilling capacity in steel (diameter): 50.0 mm Overhang: 320 - 1,220 mm Workpiece height - max.: 330 - 1,170 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 1,300 x 980 mm Tapping capacity: M42 Quill stroke: 335 mm Total power requirement: 4.0 kW Gjdpfx Aoxaaabon Hjkc Machine weight (approx.): 3,000 kg Dimensions (L x W x H): 2,035 x 1,000 x 2,830 mm Equipment: - Large base plate, ideal for machining large workpieces - Thick-walled, ground column for increased sliding properties of the boom - Boom arm and drilling head with independent hydraulic clamping - Simple height adjustment of the boom arm via lifting motor - Ideal for drilling, countersinking, reaming, and tapping - Hardened and ground gears running in an oil bath - Good sliding properties of the drill head on the boom due to ground surfaces Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant system - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable safety guard

Būklė: naujas, Drilling capacity in steel (diameter) 60.0 mm Throat depth 350 - 1,600 mm Workpiece height - max. 665 x 1,250 mm Spindle speed 38 - 2,000 rpm Spindle taper MT 5 MT Base plate 960 x 1,760 mm Thread cutting M42 Gkodpfxjxaa H Ue An Hjc Quill travel 325 mm Total power requirement 4.0 kW Machine weight approx. 3,800 kg Dimensions L x W x H 2,600 x 1,100 x 2,770 mm Features: - Stepless speed control as standard - Set speed displayed on digital readout - Drill spindle with high concentricity - Equipped with automatic spindle brake - Boom, drill head, and column each with independent hydraulic clamping - Large base plate, ideal for machining large workpieces - Thick-walled, ground column for optimized boom gliding properties - Simple height adjustment of boom arm via lifting motor - Spindle position remains unchanged, ideal for series production - Drill head and column can be clamped or released individually or simultaneously via push button - Hardened and ground guideways on the boom - Quill counterbalanced by counterweight - Ideal for drilling, countersinking, reaming and thread cutting Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B 16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine light - Initial filling with Shell Tellus 46 - Coolant system - Frequency inverter - Digital speed display - Lifting motor - Hydraulic motor - Height-adjustable safety guard - Operating tools