Juostinis pjūklas

BERNARDO EBS 100 C

Sąlyga: naudotas, Technical details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (cross): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total connected load: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Mikromat precision lathe - Longitudinal slide travel = 580 mm; Cross slide travel = 170 mm; Top slide travel = 130 mm - Workpiece clamping via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Tool holder: Multifix quick-change toolpost Equipment: Coolant pump Bodpevadd Isfx Agiocw 4 machine levelling feet Copying device

Sąlyga: visiškai atnaujintas (naudotas), Pressione: 150 t Corsa: 140 mm Bsdpfx Ajgd H Tpsgiocw Dimensioni tavola: 510 x 530 mm

Sąlyga: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Bcjdsd Du T Ijpfx Agiow Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Sąlyga: labai geros būklės (naudotas), Ansemi parallel lathe, model Mono FAP 325 ES, distance between centers: 1500 mm, center height: 325 mm, spindle bore: 65 mm, motor power: 18 kW, overall dimensions: 3300 x 1200 x 1700 mm (H), weight: 3260 kg. Bodswcd Hmopfx Agiecw

Gamybos metai: 2012, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBHF-KBK1, DEMAG KBK Crane Ceiling Crane Runway, dimensions approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 KG - 0.125 t Technical data of the system: - Crane runway made from Demag KBK1 rails System is delivered complete: - KBK rails, rail connectors, traveling gears, end plates, cable trolley, power supply, supports/hangers, etc. Includes 1 bridge with 125 KG Demag DC-COM chain hoist Crane is dismantled and available immediately Bodpspiarnsfx Agiecw Very good used condition, see pictures Item location: 75053 Gondelsheim Dispatch by freight or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity 125KG - 1600KG Please inquire about your crane runway with required load moment and dimensions.

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Bcedpfx Agsfz U S Eeijw Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Sąlyga: naujas, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Weight approx.: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60 – 4200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High concentricity accuracy due to tapered roller bearings, measured at less than 0.01 mm in the quill - Infinitely variable speed control - Clockwise/anti-clockwise rotation for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Clockwise and anti-clockwise rotation Bcsdped H Hhzefx Agiow - Automatic quill feed, 3 steps, 0.04–0.15 mm/rev - Motorized feed on X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety shield with microswitch, protects against flying chips and parts for maximum operator safety - Robust and large dimensioned cross table, precision machined with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel range: X / Y / Z axes 740 mm / 330 mm / 320 mm Dimensions and weights Length 2400 mm Width/Depth 2160 mm Height 2300 mm Weight 1200 kg Drilling and milling performance Max. face mill diameter: 76 mm Max. shank milling cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Network frequency: 50 Hz Horizontal milling table Length: 254 mm Width: 1370 mm Max. vertical spindle to milling table distance: 405 mm T-slot size: 16 mm T-slot number: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0 – 420 mm Coolant system Coolant pump(s) drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC category: C2 Travel X axis manual: 820 mm Y axis manual: 410 mm Z axis manual: 400 mm X axis automatic: 740 mm Y axis automatic: 330 mm Z axis automatic: 320 mm Vertical spindle Overhang: 0 – 420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60 – 4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Milling head swivel range X-Y plane: 90° Milling head swivel range Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel Z axis: 470 mm Package unit: 1

Sąlyga: naudotas, Used 3D printer EOSINT M 270, low operating hours (4910) Bsdpfxjwd Ulvo Agiecw

Sąlyga: naujas, Delivery pressure 11 bar Suction capacity 480 cm³ Bjdpfevkizgjx Agijcw Flow rate 360 Tank capacity 270 l / bar Number of cylinders 1 pc. Motor 400 Volt / 3.0 kW V / kW Speed 892 rpm Machine weight approx. 200 kg Dimensions (L x W x H) 1.6 x 0.7 x 1.2 m

Gamybos metai: 2017, Sąlyga: beveik kaip naujas (naudotas), used RENNER REKO 550/50VE air compressor 10 bar with petrol engine For operations without a power supply (e.g. roadside assistance vehicles or tyre service) The compressor is used, year of manufacture 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you, in addition to the well-known advantages of RENNER systems, especially flexible compressed air availability on construction sites, in service vehicles, and for many other applications "without a socket". They guarantee a consistent supply of compressed air, independent of location. The smaller model is mobile and can be quickly relocated thanks to its ergonomic handle, while the larger version can be easily moved and loaded onto vehicles by pallet truck or forklift due to its compact design. VE = electric start. Please note: delivered without battery. Technical data: - Intake capacity: 550 l/min - Effective delivery rate: 400 l/min - Petrol engine: 3.6 kW Honda unit with 4.8 HP - Max. pressure: 10 bar - Cylinders/stages: 2/1 - Speed: 1400 RPM - Sound pressure level: 98 dB(A) - Air receiver: 50 l - Dimensions (L x W x H): 810 x 460 x 830 mm - Weight: 70 kg Bcodjd H Dr Sjpfx Agisw Visit our store in Erlangen. We have a wide selection of new and used compressors.