Berg Schmid pirkti naudotą (134)

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min Kwsdpfx Afefg E Hle Ijt - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Length 500 mm Kwsdpfxofv Arkj Af Iet Width 380 mm Height 760 mm Weight 20 kg Bandsaw stand suitable for all Berg & Schmid PBS saws (PBS90 - PBS171).

Sąlyga: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw blade length 3375x27x0.9 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic GBS 305 HA-I Easy - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system Kwjdpfsd Iipxox Af Iot

Sąlyga: naujas, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Ksdpfx Ajd Iip Nof Ijwt Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double-mitre metal bandsaw with: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for fast mitre adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Sąlyga: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 35 + 70 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Space requirements: approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° left and 45° right - Ball bearing mounted rotary table Kwodpjurc S Refx Af Ijt - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Sąlyga: naujas, Cutting capacity at 90°: round 680 mm Kedjfg E Hmspfx Af Ijwt Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double mitre band saw for rapid cutting with pusher system P15. Option P30 available. Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially engineered for cutting profiles and beams. Maximum positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control unit ensures smooth interaction between the linear encoder and the self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The work table is mounted on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control The CNC controller enables programming of up to 90 cutting programs with varying cut lengths, quantities, and mitres. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, is equipped with "double-sided opening gripping tongs" that are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate from the ideal shape. The pusher system is constructed separately and guided by precision ball-bearing linear guides, ground rack and pinion, and a heavy-duty, frequency-driven gear motor.

Sąlyga: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Bandsaw blade length: 5,450 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2,150 x 2,050 mm SPECIAL PRICE OFFER!!!! 2-column high-performance automatic bandsaws of the SBS series The SBS series stands out with its advanced technology, high quality, durability, and an exceptionally comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions Kjdsfg E Hvjpfx Af Iswt • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tension • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping prepared for electric and hydraulic control • Swarf conveyor The SNC 20 controller allows easy and straightforward input of up to 20 different sawing jobs (length and quantity). When the desired dimension is entered, the control system automatically calculates both kerf loss and the required number of feed cycles. In addition, the error code display system provides rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast in a single piece, very quiet and low-vibration cutting • Removable chip tray (designed for cleaning/disinfection) Kwedpfeupw R Aex Af Iet • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material and feed unit • Foldable safety guard • Fine feed rate adjustment • Semi-automatic cutting! • CNC control for optimized workflows Allows input of various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. one sawing program with multiple cut lengths • Automatic (CNC) feed unit via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum remnant length 170 mm. Including: - Micro-spraying device - Leveling elements

Sąlyga: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with sophisticated technology, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 controller for CNC versions - Frequency-controlled saw drive - Operating buttons with pictograms - Work light - Driven chip brush - Hydraulic band tension - Adjustable clamping pressure - Double vice (before and after the band) Ksdpefb Nbgefx Af Iowt - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 controller allows convenient and straightforward input of up to 20 different cutting tasks (length and quantity). When the target dimension is entered, the controller automatically calculates the kerf waste and the number of feed strokes required. In addition, the error code display system offers rapid fault diagnosis for troubleshooting.

Sąlyga: naujas, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Total connected load: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°: automatic mode • Mitre left 60°: semi-automatic mode (cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover Kwedped Iip Aefx Af Ijt • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low vibration cutting • Removable chip tray (disinfection) • Excellent access to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Selectable for 2 program levels Semi-automatic mode Fully automatic mode Start after entering the required number of pieces and length: initial material cut, cutting process, and piece counting continues until the program is completed • MPS controller for entering the required number of feed cycles • All important machine data (power consumption, cutting time, number of pieces) is displayed on the LED display during the cutting process • Entered data is stored in the RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the complete process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable via reversing automatic 1 – 29 times, remainder piece length 210 mm

Sąlyga: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 110 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing turntable - Laterally adjustable vise Kodpfx Afonq Sane Iowt - Robust, large material support - Automatic cooling system Image shows semi-automatic version.

Sąlyga: naujas, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vise - Material height sensor - Cutting control via ammeter - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy miter adjustment - Movable quick-release vise - Quick-release lever - Automatic coolant system Kwjdofgyh Sjpfx Af Iot

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. Kwsdpfx Aofg E Hpjf Iot • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naujas, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw band dimensions: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series stands out with its advanced technology, high quality, durability, and a uniquely extensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush Kwsdpofg E Hwjfx Af Ijt • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the saw band) • Creep mode for positioning • Bundle clamping electrically and hydraulically prepared • Chip conveyor The SNC 20 control allows simple and user-friendly input of up to 20 different sawing operations (length and quantity). When entering the target dimension, the control system automatically calculates the trim cut and number of feed strokes. Additionally, the error code display system enables quick diagnosis for troubleshooting.

Sąlyga: naujas, Cutting diameter round: 310 mm Cutting diameter square: 310 mm Cutting diameter flat: 340 x 310 mm Saw band length: 3730 x 34 x 1.1 mm Table height: 922 mm Band speed: 15 - 100 m/min Total power requirement: 3.0 kW Machine weight approx.: 1.65 t Dimensions (L x W x H): 1950 x 1755 mm 2-Column Bandsaw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities • Angled saw frame for maximum bandsaw blade service life • 2-column structure, linear-guided on both sides • Linearly guided sensor for automatic detection of cutting height • Hydraulic clamping pressure reduction (optional) for thin-walled tubes and profiles • Hydraulic cutting pressure control for maximum cutting performance Kwedpfxevn Uy Ae Af Iot • Material feed carriage with bridge construction for optimal transport/feed and clamping of the workpiece • Feed unit via precision ball screw • Double vice before and after the saw band • Electrically driven chip conveyor • Cleaning pistol for easy system cleaning • Full enclosure with easy access for maintenance and cleaning • LED work light • Minimum remnant piece length of 50 mm • Bundle clamping device (optional)

Sąlyga: naujas, Cutting capacity at 90 degrees: round 310 mm Cutting capacity at 90 degrees: square 280 mm Cutting capacity at 90 degrees: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.8/2.2 kW Machine weight approx. 0.68 t Space requirement approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy - Miter cuts: left 60° / right 45° - Industrial-grade hydraulics, powerful 18 bar - Excellent material accessibility - Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting performance - Hydraulic vise (closes/opens hydraulically) Kwsdod Iiptspfx Af Iot - Swarf removal brush - Ball-bearing material turntable - Quick-acting movable clamp - Material height sensor (Automatic start-of-cut detection) Semi-automatic operation procedure: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, start cutting immediately 4. Switch off saw blade 5. Raise frame just above the material 6. Open vise

Sąlyga: naujas, Cutting diameter: 185 mm Saw band dimensions: 2,085 x 20 x 0.90 mm Table height: 920 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 200 kg Berg & Schmid - Metal Band Saw GBS 185 Eco AutoCut Extremely fast and smooth cutting through improved drive technology Kedpfx Aevn Uzaof Iowt - Mitre cuts up to 60° to the left - Suitable for dry and wet cutting - Coolant system - Machine base

Sąlyga: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Kwedofu Nbbopfx Af Ist Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirements: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut-start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush Feed vice with double-sided opening Minimum offcut length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation, adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping units Pre-selection of 3 different material feed speeds Visualization of the entire workflow with easy data input

Sąlyga: naujas, Cutting capacity at 90 degrees: round 105 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: rectangular 100 x 105 mm Saw blade dimensions: 1335 x 13 x 0.65 mm Ksdpfx Afjfv Aq Rs Iowt Dimensions (L x W x H): 650 x 310 x 300 mm Blade speed: 30 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Special Offer Price!! Berg & Schmid - Portable Band Saw PBS 90 ESC Powerful and particularly robust metal band saw with aluminum die-cast saw table and infinitely variable cutting speed for mitre cuts up to 60° Shipping contribution: €25 Images are of the identical PBS 110 model.

Sąlyga: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. Kedsd Iipmopfx Af Iowt - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Sąlyga: naujas, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 35 / 70 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cutting monitoring via ammeter - Cutting pressure feed regulator - Blade speed 34 / 74 m/min - Mitre cuts up to 60° to the left and 45° to the right - Patented, ball-bearing turntable for easy mitre adjustment - Quick-release movable vice - Quick-action clamping lever Ksdpfod Iip Rjx Af Iewt - Automatic coolant system Shipping cost share: 120 EUR

Sąlyga: naujas,

Sąlyga: naujas, Cutting capacity at 90 degrees: round 250 mm Kwodofgyh Ropfx Af Iet Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 25 - 90 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed 25 - 90 m/min - Miter cuts up to 60° to the left and 45° to the right - Ball bearing turntable for rapid miter adjustment - Movable quick-release vise - Quick clamping lever - Automatic coolant system

Sąlyga: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820 x 610 mm Saw blade length: 5850 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirements: approx. 5.85 x 3.6 x 2.7 m 2-column band saw for high-speed cutting, K-tech 800H with pusher system P 15. P 30 (option). Fast, smooth and ergonomic cutting. Specially developed for cutting profiles and beams as well as solid material. Material clamping is done vertically on both the infeed and outfeed sides. Starting from the K-tech 800 H, the machine is equipped as standard with an additional horizontal clamping vice. The combined action of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. Kwjdpfxofgyife Af Iot The machines come standard with the environmentally friendly B&S Clean Cut cutting system featuring minimal quantity lubrication. This reduces cleaning requirements and conserves resources. CNC Control A CNC control unit allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. The B&S pusher system (feed and positioning system) is equipped with "double-opening hydraulic grippers," which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and guided by ball-bearing linear rails, precision-ground rack, and a frequency-driven, robust gear motor.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw band length: 3375 x 27 x 0.9 mm Band speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support Kwsdpfxjfd Abaj Af Ijt - Automatic cooling system The illustration shows the semi-automatic version.