Aufspannen Besisukantis Stalo pirkti naudotą (7 842)

Sąlyga: labai geros būklės (naudotas),

Sąlyga: beveik kaip naujas (parodų įrenginys), 1 roller table, 3.0 m long x 0.77 m wide, equipped with 7 carrying rollers, pneumatic lifting alignment chain with worm gear and bellows cylinder, plus a wood transfer carriage with rubber turntable for single-person wood handling, and 2 foldable stop rollers for planks from the band saw that have already been edged on one side. Ksdpfx Ajt E Nw Tjf Isdg 1 roller table, 3.5 m long x 0.77 m wide, with 8 carrying rollers, available with or without transfer carriage. Other similar roller tables available.

Sąlyga: naujas, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Machine weight: approx. 226 kg Kodpfexqrhljx Af Ijdg Welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench features an interchangeable, robust tabletop that accommodates all TM-fixture components with a diameter of approximately 1.6 cm. This enables you to have an ultimate, high-performance, and compact mobile workstation. Increase your clamping and fixing options and be ready for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and fixing during welding and production. Clamp and fix at any point on the reversible, double-sided, precision-ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop to ensure accuracy in all your setups. Technical Specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm holes (UDN5150) 2 x Side clamps, suitable for 1.5875 cm holes 2 x Inserta pliers – suitable for 1.5875 cm holes (PTT522K) 2 x Inserta pliers – suitable for 1.5875 cm holes (PTT634K) 2 x Magnetic V-pads for the top 2 x Positioning pins, suitable for 1.5875 cm holes 2 x Angle brackets, 1.5875 cm holes (T50305) 2 x Angle brackets, 1.5875 cm holes (T50304) 4 x Stops, suitable for 1.5875 cm holes (T54203) 4 x Stops, suitable for 1.5875 cm holes (T54205) 4 x V-block spacers, suitable for 1.5875 cm holes 8 x D-stop rods, 1.5875 cm holes 8 x V-blocks, suitable for 1.5875 cm holes 10 x Ball plunger screws, suitable for 1.5875 cm holes 12 x Magnetic support pins

Sąlyga: naujas, Gamybos metai: 2024, bendras aukštis: 860 mm, bendras ilgis: 2 400 mm, bendras plotis: 1 200 mm, bendras svoris: 920 kg, aukščio reguliavimo tipas: mechaninis, Manufacturer: GERD WOLFF Technical Specifications: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Improved fatigue strength • Enhanced vibration resistance • Fine scale marking • Reinforced with weld seams and ribs on the underside • Optimal working height of 820-865 mm • 6x height-adjustable support legs • Suitable accessory set available (optional) Our welding tables are manufactured from cast iron grade HT 300 and are nitrided as a single unit after machining. Additionally, the tables feature a precise fine scale that is engraved using laser technology. For optimum stability, our welding tables are reinforced on the underside with weld seams and ribs. (See images) Furthermore, each table undergoes a 3-day gas nitriding process, which increases corrosion resistance as well as fatigue and vibration strength. Kjdpfx Asvbbqnef Iedg All our tables come with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The illustrations are not to scale and serve for reference purposes only. Our welding tables are produced for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table

Sąlyga: naujas, Gamybos metai: 2023, bendras aukštis: 860 mm, bendras ilgis: 4 000 mm, bendras plotis: 2 000 mm, bendras svoris: 2 400 kg, Manufacturer: GERD WOLFF Technical Details: • Length: 4000 mm • Width: 2000 mm • Height: 200 mm • Weight: 2400 kg • Bore diameter: 28 mm • Bore spacing: 100 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection from welding spatter • Maximum load capacity • Increased fatigue strength • Enhanced vibration resistance • Fine laser-engraved scale • Reinforced with weld seams and ribs on the underside • Optimal working height: 820–865 mm • 8x height-adjustable leveling feet • Optional matching accessory kit available Our welding tables are made from cast iron quality HT 300 and are gas-nitrided as complete units after precision machining. In addition, these tables feature a precise fine scale, engraved using advanced laser technology. To ensure optimal stability, our welding tables are reinforced with welds and ribs underneath. (See illustrations) Moreover, each table undergoes a 3-day gas nitriding process, which significantly increases corrosion resistance as well as fatigue and vibration strength. All our tables come with height-adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This enables a flexible working height from 820 to 865 mm. Additional available sizes: • 1000 x 1000 x 200 • 2000 x 1000 x 200 Kdedpfxjtrlcvj Af Iog • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Images do not represent original size and are for illustrative purposes only. Our welding tables are produced for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table Manufacturer: GERD WOLFF Technical Details: • Length: 1000 mm • Width: 1000 mm • Height: 200 mm • Weight: 300 kg • Bore diameter: 28 mm • Bore spacing: 100 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection from welding spatter • Maximum load capacity • Increased fatigue strength • Enhanced vibration resistance • Fine laser-engraved scale • Reinforced with weld seams and ribs on the underside • Optimal working height: 820–865 mm • 4x height-adjustable leveling feet • Optional matching accessory kit available Our welding tables are made from cast iron quality HT 300 and are gas-nitrided as complete units after precision machining. In addition, these tables feature a precise fine scale, engraved using advanced laser technology. To ensure optimal stability, our welding tables are reinforced with welds and ribs underneath. (See illustrations) Moreover, each table undergoes a 3-day gas nitriding process, which significantly increases corrosion resistance as well as fatigue and vibration strength. All our tables come with height-adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This enables a flexible working height from 820 to 865 mm.

Sąlyga: naujas, Gamybos metai: 2024, bendras aukštis: 860 mm, bendras ilgis: 2 000 mm, bendras plotis: 1 000 mm, bendras svoris: 650 kg, aukščio reguliavimo tipas: mechaninis, Manufacturer: GERD WOLFF Technical Details: • Length: 2000 mm • Width: 1000 mm • Height: 200 mm • Weight: 650 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Ksdevbbqzepfx Af Isdg Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scaling • Reinforced underside with welded seams and ribs • Optimal working height: 820–865 mm • 6 adjustable leveling feet • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast iron quality and are nitrided as a single unit after mechanical finishing. Additionally, these tables feature precise fine scaling, engraved using laser technology. To ensure proper stability, our welding tables are reinforced on the underside with welded seams and ribs (see images). Furthermore, they undergo a 3-day gas nitriding process, which enhances corrosion resistance as well as the tables’ fatigue and vibration strength. All of our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm, allowing a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 The images do not represent the original size and are for illustrative purposes only. Our welding tables are manufactured for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding table

Gamybos metai: 1999, Sąlyga: naudotas, Table length mm Table width mm Table load capacity t Kodpfxegxqvzj Af Iedg Plate width 2980 mm Plate depth 3000 mm Plate height 1400 mm Total power requirement 11 kW Machine weight approx. t Space requirements approx. m Clamping surface: 2980 mm x 3000 mm x 1400 mm Max. workpiece mass: 5000 kg Tilting range: 90° Total weight: 22,500 kg Number of T-slots: 12 T-slot dimensions 48 x 28 mm – Height: 49 mm Motor Power: 11 kW Speed: 1440 rpm Rated torque: 200 Nm Hydraulic unit Drive motor: 1.5 kW Delivery rate: 8.9 l/min Operating pressure: 100 bar Tank: 13 l

Sąlyga: naujas, NAUJI ROTACINIAI STALAI // ROTACINIAI-SLANKIOJANTYS STALAI Pozicionavimas, sinchroninis sukimasis ir interpoliavimas Rotacinio stalo matmenys: 1.000 x 1.000 // 1.200 x 1.200 // 1.500 x 1.500 // 1.800 x 1.800 // 2.000 x 2.000 // 2.500 x 2.500 // 3.000 x 3.000 // 3.500 x 3.500 // 4.000 x 4.000 mm --- Prispaudimo paviršius gali būti ir apvalus, o ne kvadratinis - Kdedpom Tv Azsfx Af Ijg Didžiausias ruošinio svoris: 6.000 iki 80.000 kg Perstūmimo ašis, pasirinktinai: 1.000 iki 3.000 mm (kas 500 mm) Pozicionavimo tikslumas: ±5 lankiniai sekundės Atsakoma tik į užklausas iš Vokietijos // Tik užklausos iš Vokietijos bus nagrinėjamos

Sąlyga: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Iš viso parduodami 8 surinkimo-sukimo stalai. Visi iš Ruchser. Parduodama dėl gamybos nutraukimo. Kedpfxsx U Dkis Af Isdg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, CMS agil tr glass cutting table for float and laminated glass Max. workable sheet size: 3,810 x 2,600 mm Sheet thickness: 2-19 mm Travel speed: 0-200 m/min Acceleration: 10 m/s² Included equipment: Kdjdpfxopygwie Af Ieg - Tilting table - Tool magazine with 5 positions - Operator panel incl. software

Sąlyga: labai geros būklės (naudotas), Siūlome jums: Kedpfxsx U S E Uo Af Ijdg Lehmann rotoFIX NC sukamasis stalas (4-asis ašis) EA-510.L-M1 RFX - Sukamasis stalas EA-510.L tipas, spaudimo momentas 800 Nm - Priešinis atraminis guolis GLA.TOP2-150 (spaudos momentas 2000 Nm) - Tvirtinimo rinkinys RFX.510-ASa-TOP su paruošimu sukimuisi (4 kanalai) - Aliumininė spaudimo skersinė RFX.510-SB600a (L=600 mm, B=215 mm) - Plieno bazinė plokštė RFX.510-GP600s-TOP - Elektros ir pneumatinis paruošimas - Programinės įrangos paruošimas sukimosi apdirbimui - Maks. apsukų dažnis: 80 aps./min - Ašies aukštis: 180 mm (su bazine plokšte) - Rekomenduojama montuoti dešinėje darbinio stalo pusėje - Skirta HEIDENHAIN valdymo sistemai Prekės būklė: Sukamasis stalas nuimtas nuo staklių, kurios dirbo tik 900 veleno valandų – todėl labai mažai naudotas ir puikios būklės. Techninių duomenų ir aprašymo pakeitimai bei klaidos galimi, o prekė gali būti parduota bet kuriuo metu!

Sąlyga: naudotas, Technical details: Table diameter: 450 mm Table height: 160 mm Kodpfsu Nkncjx Af Isdg Rotational movement: 360 degrees Clearance: 40 mm Machine weight approx.: 150 kg Required space approx.: 650x600x170 mm Baseplate footprint: 620x420 mm T-slots: according to DIN 650 and 508 T-slots 8x radial, 4x 163 mm long and 4x 135 mm long - a=12 mm - h=19 mm - b=21 mm - c=9 mm

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Table diameter: 500 mm Table height: 150 mm Table rotation – manual/mechanical: 360° Kdjdpfju N D I Ajx Af Isg Machine weight approx.: 110 kg Dimensions: 800 x 800 x 180 mm Rotary table movement via handwheel Operation: clutch connection Ø 20 x 32 mm Base mounting: 2x T-slots Ø 19 x 29 mm Equipment: Top plate octagonal, size 665 mm x 23 mm, 3x through holes Ø 30 mm centered Accessories: 4x lifting eyes

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Table diameter: 500 mm Table height: 70 mm Table rotation - manual/mechanical: yes ° Approx. machine weight: 300 kg Approx. space requirement: 0.92 x 0.65 x 0.19 m T-slots according to DIN 650 Kdjdsu Nkm Eopfx Af Iog a = 18 mm h = 30 mm b = 30 mm c = 13 mm

Sąlyga: naudotas, Technical Details: Kdjdpeu N Dz Aofx Af Iog Table diameter: 315 mm Table rotation – manual/mechanical: 360° Approx. machine weight: 100 kg Dimensions: 620 x 530 x 135 mm Multiple rotary tables of this type are available for sale. Total height: 135 mm Additional features: - With radial scale - Surface is fine-machined - Center mounting: Morse taper 3 (MK3) - Bolt circles: 19 / 27 / 31 / 41 / 49 / 59 - Can be operated externally/mechanically via clutch on both sides (switchable between clockwise/counterclockwise with automatic reversing) - Base clamping: support surface 360 x 420 mm with 1 T-slot (face side) 16 x 200 mm

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Spindle diameter: 100 mm X travel: 1,500 mm Y travel: 1,450 mm Kodpeu Idqbjfx Af Ijdg Z axis: 930 mm W axis: 506 mm B axis (table): 360° CNC control: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 – 1,600 rpm / stepless Table load capacity: 4.0 t Table size: 1,100 x 1,400 mm Table rotation: 360° Feed rates X/Y/W/Z axis: 2 – 2,000 mm/min Rapid traverse X/Y/W/Z axis: 5,000 mm/min Total power requirement: 40 kW Electrical cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC boring and milling machine with hydraulic unit Equipment: Measuring probe electronic handwheel hydraulic weight compensation on Y axis universal milling head A wide range of accessories included – please inquire! In good condition.

Sąlyga: naudotas, Technical Details: Table diameter: 950 mm Table height: 300 mm Rotational movement: 360 degrees Table tilting range: 50 degrees Kdsdpfx Ajwf Iuyof Isg Machine transport dimensions: 1.0 x 1.0 x 0.4 m Approximate machine weight: N/A kg

Sąlyga: naudotas, Technical details: Table diameter: 450 mm Table rotation - manual/mechanical: 360° Clamping table swivelling: 90° mechanical Machine weight approx.: 100 kg Dimensions: L: 800 x W: 700 x H: 400 mm The surface of the rotary table is hand-scraped. Very good condition! Micrometer-precise locking Positioning within 0.01 mm range T-slots according to DIN 650, radial arrangement Ksdpfxeu N D Ays Af Iedg Base clamping: 16 mm (6 bores)

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Spindle diameter: 120 mm X-axis travel: 2750 mm Y-axis travel: 1500 mm Z-axis travel: 1250 mm B-axis (table): 360° Kdodpfx Afju Idrfj Isg W-axis (spindle longitudinal): 900 mm CNC control: TNC 155 contouring control Tool holder: SK50 Table load capacity: 6.3 t Table size: 1600 x 1400 mm Table rotation: 360° Boring spindle speed: 3 – 1000 rpm Total power requirement: 100 kW Control cabinet dimensions (LxWxH): 650 x 2800 x 2100 mm Machine dimensions (LxWxH): see list (m) Machine weight approx.: 15.0 t Contouring control Planer slide feed 210 mm (U-axis) Hydraulic unit Extension arm with control panel Heidenhain measuring system

Sąlyga: naudotas, Technical Details: Table diameter: 300 mm Table height: 250 mm Rotation: 360 degrees Passage: 40 mm Tilting: single-sided 90° Machine weight approx.: 126 kg Dimensions (LxWxH): 0.65 x 0.52 x 0.25 m Base footprint: 380x330 mm Kodju Nknpopfx Af Iedg T-slots: according to DIN 650 and 508 T-slots: 4x 163 mm long and 4x 135 mm long - a = 12 mm - h = 19 mm - b = 21 mm - c = 9 mm

Sąlyga: naudotas, Technical Details: Table length: 4000 mm Table width: 4000 mm Table load capacity: 100 t Kodsu N D Tlepfx Af Iodg Table longitudinal travel (U-axis): 2000 mm Rotary table (B-axis): 360° Rapid traverse longitudinal (U-axis): 6000 mm/min Rapid traverse (B-axis): 0.05 - 2 rpm Boring Mill Table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support: hydrostatic support Diameter of saddle coupling: 2,190 mm Hydraulic clamping devices - 3 hydrostatic guideways for longitudinal travel - 1 hydrostatic circular guideway for the rotary axis Positioning system: - Heidenhain rotary encoder for the B-axis - Heidenhain optical scale for the U-axis The servo motors, control cabinet, and a panel are not included in the scope of delivery.

Sąlyga: naudotas, Techninė informacija: Medžiagos storis: 1,0 mm Medžiagos plotis: 17,0 mm Vidinis skersmuo: 30,0 mm Kdjdpfju N E Evox Af Ieg Išorinis skersmuo: 78,0 mm Atsarginė dalis stalo gręžimo staklėms BT 2 Plokščioji spyruoklė – grąžinamoji spyruoklė – spiralė spyruoklė Atitikties deklaracija pagal ISO/IEC 17050-1 Prieinama patikros sertifikatas 3.1 pagal DIN EN 10204

Sąlyga: naudotas, Techninės detalės: Stalo apkrova: 3 t Stalo skersmuo: 1280 mm Stalas sukamas: 0-180 laipsnių Stalas pakreipiamas: ne Apytikslis staklių svoris: 1 376 kg Matmenys (IxPxA): 1,4 x 1,7 x 0,18 m Padėties nustatymo stalas Išbandytas iki 3 t apkrovos Šiuo metu 2 padėtys: 180 laipsnių Sukamasis stalas po starto pasisuka iš 0 laipsnių į 180 laipsnių ir atgal į 0 laipsnių. Galima modifikuoti iki maks. 270° Kdjdpfxsxz E Exe Af Iog

Sąlyga: naudotas, Technical details: Clamping surface: 1000 x 500 mm Approx. machine weight: 530 kg Dimensions (L x W x H): 0.5 x 1.0 x 0.49 m Angle mounting table – machine table – machine clamping table Kodou Rd Niepfx Af Iodg with 33 clamping holes M24 Vertical mounting side: W x H: 800 x 450 mm with 4 T-slots Ø 30 x 75 mm

Sąlyga: naudotas, Gamybos metai: 2004, Techniniai duomenys: Stalo ilgis: 4000 mm Stalo plotis: 2000 mm Maks. plokštės storis: 100 mm Stalo aukštis nuo grindų: apie 860 mm Kdjdpfeu Nkxusx Af Ijg Bendras svoris: 5,6 + 0,5 t Išmatavimai (IxPxA): 4,0 x 2,2 x 0,1 m Suvirinimo stalas / Kainodara: 0,50 EUR/kg su pagrindu ir 6 vnt. kojų atramų