Stalo maršrutizatoriaus pasukimas

Holzkraft / SCM Minimax Tw 45c

Sąlyga: naujas, - NEW - Description - Sturdy steel and cast iron construction - Milling spindle tiltable from 0° to -45° towards the rear - Three spindle speeds from 3,500 to 10,000 rpm - Spindle with standard forward and reverse rotation - Large, heavy-duty milling unit made of cast iron, mounted directly to the table - Solid and precise cast iron table - Fast and easy speed change Rsdpfxevwf Uce Agijp - Powerful 5.0 kW industrial motor - Standard curved milling protection hood included Equipment details Aluminium sliding carriage - Equipped with a highly proven ball contact system - Torsion-resistant, highly precise, smooth-running and reliable in daily use - 10-year Holzkraft warranty on wear of the guideways Cast iron milling unit - Directly attached to the milling table - Milling spindle runs on precision ball bearings mounted high up, ensuring minimal bearing load and maximum service life - 3 milling speeds from 3,500 to 10,000 rpm Powerful motors - Equipped with a high-performance three-phase motor Milling protection - For maximum safety, the milling guard is standard equipped with an adjustable height guide rail and a safety shield Milling fence - Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw - Integrated extraction connection ensures clear visibility Milling table opening - Large milling table opening also allows the use of large panel-raising cutters and tenoning/mortising tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - Versatile integrated stop to bridge the tool gap - Enables safe operation even with narrow workpieces Technical data: Dimensions and weights Weight (Net) approx. 290 kg Dust extraction connection Extractor port diameter 2 x 120 mm Work table Work table length 1,000 mm Sliding carriage length 1,000 mm Work table width 435 mm Sliding carriage width 270 mm Table height 900 mm Installation information Required space length 1,945 mm Machine body width/depth 710 mm Required space width/depth 2,220 mm Work area length 1,600 mm Clarification required space Dimensions refer to maximum travel paths or usable lengths. Work area width/depth 1,600 mm Machine body length 1,000 mm Clarification working area Please add the stated dimensions to the required space to obtain the recommended free area for setting up the machine. Electrical data Connection voltage 400 V Network frequency 50 Hz Phase(s) 3 Ph Drive motor power 5.0 kW Current type AC Milling spindle Spindle tilt 0 to -45° Spindle speeds 3,500/7,000/10,000 rpm Usable spindle length 100 mm Spindle shaft diameter 30 mm Spindle projection max. above table 130 mm Maximum milling tool diameters Max. lowerable tool diameter 180 mm Max. tenoning cutter diameter 275 mm Max. profile milling diameter 210 mm Scope of delivery Curved milling protection hood Anodized aluminium sliding carriage Telescopic mitre stop Aluminium fence jaws . 5502045

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, For sale is a used Hammer B3Winner Comfort combination saw-spindle moulder with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our qualified staff. (Fully functional) Technical data: - Tiltable circular saw and spindle moulder 90-45° - Sliding table 2000 mm - Outrigger table with miter index - Mitre fence 1300 mm - 4 spindle speeds: 3000/6000/8000/10000 rpm - Cutting width: 800 mm - Dual motor, each 5.5 HP (4 kW), 400 Volt Rjdpjv Sbpxefx Agijp - Year of manufacture: 2019 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: circular saw, spindle moulder, milling machine, combination machine, combo machine Reference: R-L0AHG

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Spindle tiltable: No Height adjustment: Handwheel Tilting adjustment: - Cutter jaw adjustment: Manual Height display: Mechanical counter Tilt angle display: - Cutter fence display: Mechanical counter Cutter spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Rjdpfx Ajgzlpkogijp Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Sąlyga: naujas, Holzkraft minimax t 45c spindle moulder (5502044) Affordable, with fixed spindle and cast iron worktable. - Robust steel and cast iron construction - Equipped with fixed spindle - 3 spindle speeds from 3500 to 10000 rpm - Spindle with forward/reverse rotation - Large dimension cast iron milling unit, mounted directly on the table - Extraction hood below the worktable for improved dust extraction - Solid and precise cast iron table - Fast and effortless speed change - Powerful 5.0 kW motor - Standard supplied curved guard cover - Quality Made in Italy Equipment Details Cast iron milling unit - Mounted directly to the table - Spindle supported high up with precision ball bearings, resulting in minimal bearing load and maximum service life Rodpfx Ajkyt Ulegiep - 3 milling speeds from 3500 to 10000 rpm Powerful Motors - Fitted with high-performance three-phase motor Spindle Guard The standard spindle guard is equipped with a height-adjustable guide rail and protective plate for maximum safety as standard. Spindle Fence - Precise fence with quick adjustment and fine adjustment via scale on the fence jaw - Integrated extraction port ensures clear visibility Table Opening - Large table opening also allows the use of larger raised panel cutters and tenoning or slotting tools both above and below the table Curved Guard Cover - Included as standard Reversible Fence Jaws - Versatile fence for bridging the tool gap - Enables safe operation even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimal protection on any spindle moulder, individually adjustable for any task - Universal base elements for mounting AIGNER safety and work devices - Quick adjustment by simultaneous clamping of all individually movable bars - High-quality aluminium construction - Universally usable on all HOLZKRAFT spindle moulders - 500 mm: Art. No. 5851000 - 650 mm: Art. No. 5851650 TECHNICAL DATA Dimensions and Weights Weight (Net) approx.: 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Working Table Table length: 1000 mm Table width: 575 mm Table height: 900 mm Installation Details Required floor space length: 1945 mm Required floor space width/depth: 920 mm Note on required space: The dimensions take into account maximum working ranges or usable lengths. Machine body length: 1000 mm Machine body width/depth: 575 mm Working area length: 1600 mm Working area width/depth: 1600 mm Note on working area: Add the indicated measurements to the required floor space for the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Supply frequency: 50 Hz Main drive motor output: 5.0 kW Spindle Usable spindle length: 100 mm Max. spindle projection above table: 130 mm Spindle speed(s): 3500/7000/10000 rpm Spindle shaft diameter: 30 mm Milling Tool Max. Diameter Max. diameter (retractable): 180 mm Max. profiling diameter: 210 mm SCOPE OF DELIVERY - Curved guard cover - Aluminium fence jaws Holzkraft specialist dealer – accessories available on request!

Sąlyga: labai geros būklės (naudotas), Įranga: dozatorius, Elektrinis pjūklo aukščio ir kampo reguliavimas; priešpjaustytuvas. Galite mums paskambinti arba parašyti. Kalbame ir rašome vokiškai bei rusiškai. Žinutes galite siųsti ir anglų kalba. Redpfxow Ix Ale Agiop

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Pjūklas pasukamas +/- 45° Stalo ilgis 2800 mm Pjovimo plotis 1440 mm Variklio galia 7,5 kW Pjovimo aukštis 150 mm Pjūklo disko skersmuo 450 mm Staklių svoris apie 1200 kg Rjdpfexcg Hgsx Agisp Matmenys (I x P x A): 3,2 x 3,4 x 1,7 m Ši formatinė diskinė pjovimo staklė yra labai geros būklės, iš karto prieinama ir gali būti apžiūrėta veikimo būsenoje pas pardavėją. APRAŠYMAS: - Paruošta išankstiniam įpjovimo įrenginiui - Formatinis diskinis pjūklas su pasukamu disku ir išankstinio įpjovimo įrenginiu preciziškam medienos plokščių, baldų, individualių baldų, langų rėmų, durų, plokščių, plastiko, kompozitinių medžiagų, aliuminio ir kt. pjovimui – CE standartas.

Sąlyga: naujas, Gamybos metai: 2026, The CORMAK PBM290 horizontal drilling machine is a professional device designed for efficient woodworking. This machine features advanced solutions ensuring excellent quality of machined components. Main features of the PBM290 horizontal drilling machine: Serial drilling capability: This drill is designed for serial drilling, allowing for holes at various spacings (16/20/22/32 mm) using a dedicated dowel drilling device. Simple operation: The worktable is exceptionally easy and intuitive to operate, enabling one-handed use, which significantly enhances operator comfort. Precise table height adjustment: Table height can be adjusted simply and accurately with a handwheel equipped with a numerical counter, allowing for precise setting according to project requirements. Secure workpiece clamping: A set includes an eccentric clamp, providing safe fastening of the workpiece and eliminating the risk of movement during operation. Dual-sided adjustable angle stop: The drill’s angle stop can be adjusted up to 60° on both sides, offering flexibility in performing a wide range of tasks. Tool storage: The machine features a large, lockable tool compartment, ensuring order and easy access to required accessories. Extraction port connection: The drill is equipped with a 100 mm extraction port, enabling connection to a dust extraction system for effective removal of waste and dust, keeping the workspace clean. Additional benefits of the woodworking machine: One-handed operation: The lever allows for one-handed use, improving operator convenience. Height adjustment: Drilling height can be accurately set via a handwheel, allowing drilling at different material levels. Bidirectional operation: The drill can run both left and right, increasing its versatility. Efficient motor: The machine is equipped with a powerful 2.2kW motor. Included accessories: Rjdovuq Dkepfx Agisp - Three-jaw chuck: Secure and stable drill bit holding during operation. - Travel stop: Facilitates precise drilling depth limitation. - 100 mm dust collector cover: Effectively collects and removes dust during drilling. - Eccentric clamp: Provides a secure hold of the workpiece. - Angle ruler: Facilitates precise angle setting during drilling. Application of the horizontal wood drilling machine: The CORMAK PBM 290 horizontal drilling machine is an indispensable tool for professional carpenters and craftsmen demanding precision, quality, efficiency, advanced solutions and easy operation for horizontal drilling processes. Its versatile features and accessories allow the implementation of various woodworking and similar material machining tasks. Technical specifications TABLE DIMENSIONS 500 x 207 mm DRILL TABLE HEIGHT 760 - 900 mm MAX. DRILLING WIDTH 309 mm MAX. DRILLING DEPTH 150 mm SPINDLE SPEED 2850 rpm DRILL CHUCK CAPACITY 0-16 mm S1 CONTINUOUS MOTOR POWER 2.2 kW POWER SUPPLY 400 V DIMENSIONS 770 x 920 x 1245 mm WEIGHT 117 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: KK052469, Funkcionalumas: visiškai funkcionalus, Connected load: 380V 4kW Rjdpfjiinm Hsx Agisp Table size: 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Forward/reverse rotation Motor brake Socket for feed unit Protective covers for hand routers Spindle diameter: 30 mm Aigner fence Extraction port: 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Operating manual

Sąlyga: naudotas, Gamybos metai: 1966, Velenas pasukamas: Ne Aukščio reguliavimas: Rankinis ratas Posvyrio reguliavimas: - Frezavimo žandų reguliavimas: Rankinis Aukščio rodmuo: Skalė Pasvyrio kampo rodmuo: - Frezavimo atramos rodmuo: Skalė Frezavimo veleno skersmuo: 30 mm Sukimosi greičiai: 2800, 4500, 6000, 5600, 8000, 12000 aps./min. Variklio galia: 4 / 5,5 AG kW Variklio stabdys: Rankinis Rodpfexu Dhlsx Agijp Ištraukimo jungtis: 2 x 120 mm Staklių ilgis: 2000 mm Staklių gylis: 900 mm Svoris: 700 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Rsdpfjdqzh Rsx Agisp Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm