Storvirinys

Martin T45

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 Njdpfx Ajqlck Nsbzowh No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naudotas, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Obliavimo ir profiliavimo automatas Weinig Profimat 23 E, skirtas keturpusiam medienos obliavimui ir profiliavimui su mobiliu velenu. Njdpjx Ecgusfx Abzowh Velenas 1: Apačioje / 5,5 kW / 40 mm Velenas 2: Dešinėje / 5,5 kW / 40 mm Velenas 3: Kairėje / bendras variklis su nr. 2 / 40 mm Velenas 4: Viršuje / 7,5 kW / 40 mm Velenas 5: Apačioje / 4 kW / 40 mm

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface Nwsdpsqlckpjfx Abzeh • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control unit makes setting the planing height very simple, with 99 storable planing dimensions for perfect results from the first workpiece. The thickness table can be easily moved by pressing a button, or adjusted upwards in 0.1 mm increments. All feed speed controls are within comfortable reach. The heavy, vibration-damping composite frame combined with the high-quality cutterblock bearings ensures excellent surface results. Thanks to the sound-insulating construction, quiet operation is guaranteed even in standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Cutterblock speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; pushbuttons for manual coarse and fine adjustment of planing thickness with digital display, start/stop button for cutterblock, integrated hour counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; includes block locking for easy knife change • Thicknessing table: Electric height adjustment with fine adjustment, feed speed 10 mm/s, securely mounted on four support spindles, precision-ground table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, easy roller change; infeed sectional pressure bar • Extraction: Pivoting, split chip extraction hood with 160 mm port, can be connected left or right side (both sides possible on request); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication rail for oil-lubricated points; cutterblock and bearing lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease, 1 oil gun, 1 open-ended wrench, 1 knife-changing tool, 1 pair of blank knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions data: Sound pressure level at operator’s position LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Njdpfxeqlclbs Abzowh Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, storos obliavimo staklės modelis MARTIN T 44 naudota mašina CE žymėjimas: Taip darbo sąlygos: Puikios techniniai duomenys: darb. plotis mm: 630 maksimali darbo aukštis mm: 250 maksimalus nuėmimas mm: 8 2 padavimo greičiai m/min: 6 / 12 motorizuotas stalo pozicionavimas su skaitmeniniu ekranu 4 „Tersa“ peiliai pagrindinio variklio galia AG: 7,5 svoris kg: 1115 Nodsyml E Dspfx Abzjwh įtampa: 380/50

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Storio obliavimo staklės Gamintojas: Martin Tipas: T45 Pagaminimo metai: 2006 Darbo valandos: apie 128 val. Obliavimo plotis: 630 mm Obliavimo aukštis: 2,8 - 300 mm Galia: 5,5 kW Peilių skaičius: 4 Peilių tipas: Tersa 1 vnt. guminis įtraukimo ritinys 1 vnt. guminis ištraukimo ritinys Aukščio reguliavimas: elektrinis Padavimas: 6/12 m/min Nedpfx Abjyvq Htszewh Stalo ilgis: 1.260 mm Sūkiai: 5.000 aps./min Svoris: apie 1.300 kg

Būklė: naudotas, Gamybos metai: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Galvanized sheet steel construction - Space-saving due to compact design - Supplied ready for operation - ATEX – Pressure surge resistance tested according to FSA - Low energy consumption with high performance thanks to clean-air side high-performance fan with special impeller - Energy-saving motor, efficiency class IE4 - 4 large-volume collection containers, with insert bags - High safety and long service life due to certified filter media with test certificate - Pneumatic pulse-jet cleaning ("Jet" cleaning) with time-controlled regulation for filter surface regeneration - PLC control unit with display, for 4 EPN 24V DC slide valves, 4 machine start contacts, and 1 external automatic start input (additional slide valve control available at extra charge) - Connection cable, 5 m length, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - The extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-approved - Design according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - Tested according to GS-HM-03 "H3" - IE5-efficiency powerpack - Start slide valve control: Z 16 - Motor power: 11 kW - Rated air flow (Vnenn): 6927 m³/h at 20 m/s - Max. air flow (Vmax): 8000 m³/h - Negative pressure at Vnenn: approx. 3100 Pa - Negative pressure at Vmax: approx. 2300 Pa - Collection volume: 495 l - Sound pressure level: < 73 dB(A) - Extraction nozzle diameter: 350 mm Nwjdpfxex H Dahs Abzeh Dimensions: 3930 x 1030 x 2560 mm Weight: approx. 1080 kg New price over €30,000 Availability: short term Location: 63934 Röllbach

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 1 628 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 700 mm, laisvas kėlimas: 1 647 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 450 mm, šakių laikiklio plotis: 1 260 mm, tuščias svoris: 4 530 kg, pavaros tipas: Diesel, statybos plotis: 1 320 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tires type: pneumatic Front tires size: 275/70 R22.5 Front tires condition: 60 - 80% Rear tires type: pneumatic Rear tires size: 7.00-12 Rear tires condition: 60 - 80% Nodpfxsvgh Iks Abzowh Side shift, 3rd valve, front work lights, heater, particulate filter, full cabin, full free lift, CE certificate,

Būklė: naudotas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: 519553, Central extraction system Höcker Polytechnik with rotary valve and/or dust bins. (Optional: Rotary valve instead of dust bins) Manufacturer: Höcker Polytechnik Model: Multistar JQ6/5 131/20717A Year of manufacture: 11/2018 Dust type: Dust and chips Material throughput: unknown Jet-pulse cleaning of the filters Air volume flow: approx. 22,000 m³/h Discharge method: open Clean air routing: air recirculation Residual dust content: 0.1 mg/m³ with reference to dust 1 piece Filter unit, galvanized - Year of manufacture: 11/2018 - Multistar JQ6/5 131/20717A - Filter area: approx. 131 m² - Filter bags: 120 pcs - Filter bag diameter: 170 mm - Filter bag length: 2,070 mm - Filter cleaning: air jet, compressed air - Filter housing made of galvanized sheet steel - Inspection door, access ladder, maintenance platform - Certified pressure relief surfaces - Raw gas section designed as large expansion chamber - Exhaust nozzle positioned as per local requirements - Filter subframe in welded steel construction, hot-dip galvanized - Incl. dry extinguisher line, C-coupling - *Optionally with 6 chip bins or large rotary valve* 2 pieces Clean air fans DER 404/400/18.5-2 - Air volume flow: 11,000 m³/h per fan - Direct-drive fans - Galvanized sheet steel - Installed horizontally in the Multistar series - Electrical power per fan: 18.5 kW - Total air volume: 22,000 m³/h - Total pressure rise: 4,600 Pa 1 piece Ducting components for air recirculation - incl. galvanized ducting - Must be adapted for new location 1 piece Control cabinet With Siemens S7-1200 PLC Dust-tight standard steel enclosure, wall-mounted control cabinet, built and fully wired according to VDE regulations 0100, 0113 and DIN 57113. Includes all components required for control and wiring diagrams. Designed for: · Jet-pulse cleaning control · Control of 2 fans · Automatic startup of 6 fans on machine start · Pressure monitoring indicator lights · Control of 3 shut-off dampers · Control of rotary valve Installation dimensions: Nwsdpfx Asya Idvobzjh - Length: 3,960 mm - Width: 3,380 mm - Height: 5,900 mm (may vary depending on configuration) Electrical connection load: - approx. 38 kW - 400V/50Hz - Control voltage 230V AC/24V DC Location: in stock

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Nwededqzh Rjpfx Abzoh Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm