Martin T45 pirkti naudotą (3)

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter Kjdpfx Acsqlck Neujnc • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Kodoqlckpopfx Acusnc Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control unit makes setting the planing height very simple, with 99 storable planing dimensions for perfect results from the first workpiece. The thickness table can be easily moved by pressing a button, or adjusted upwards in 0.1 mm increments. All feed speed controls are within comfortable reach. The heavy, vibration-damping composite frame combined with the high-quality cutterblock bearings ensures excellent surface results. Thanks to the sound-insulating construction, quiet operation is guaranteed even in standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Cutterblock speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; pushbuttons for manual coarse and fine adjustment of planing thickness with digital display, start/stop button for cutterblock, integrated hour counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; includes block locking for easy knife change • Thicknessing table: Electric height adjustment with fine adjustment, feed speed 10 mm/s, securely mounted on four support spindles, precision-ground table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, easy roller change; infeed sectional pressure bar • Extraction: Pivoting, split chip extraction hood with 160 mm port, can be connected left or right side (both sides possible on request); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication rail for oil-lubricated points; cutterblock and bearing lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease, 1 oil gun, 1 open-ended wrench, 1 knife-changing tool, 1 pair of blank knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions data: Sound pressure level at operator’s position LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg Ksdsqlclbepfx Acuonc - Immediately available -