Martin Km 200 pirkti naudotą (84)

Sąlyga: geras (naudotas), Gamybos metai: 1988, Lathe KMK 40. Spindle speed: 1800 rpm. Turning length: 1000 mm. Includes 3-jaw chuck, 4-jaw chuck, Multix with 4 inserts, live center, face plate, collet chuck with set of collets. Lhjdpfxeu Uh U Is Acusn

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder Ljdpou Ix E Hsfx Acujhn - 2 gears

Sąlyga: geras (naudotas), Gamybos metai: 1961, Sunkioji tekinimo staklės, tekinimo staklės, šarnyrinė tekinimo lova, su pagrindinėmis ir traukos ašimis - Staklių lovos būklė: labai gera - Staklių lova: grūdinta Lhodpfowfpilsx Acusn - Gamintojas: Martin, pagrindinės ir traukos ašių tekinimo staklės, tipas DLZ 502 - Tekinimo ilgis: 2200 mm - Tekinimo Ø virš lovos: 580 mm - Tekinimo Ø virš atramos: 300 mm - Veleno skylė: Ø 65 mm - Veleno apsukos: 22,4 - 1000 aps./min - Pleišto tipo griebtuvai: Forkardt Ø 320 mm - Galinio centro konusas: MK5 - Variklis: 7,5 kW - Priedai: 4x lunetos, įrankių laikiklis, įrankiai (žr. nuotraukas) - Matmenys: 1260/3720/H1260 mm - Svoris: 2510 kg

Sąlyga: labai geros būklės (naudotas), CATALOGNO 6607 TECHNINIAI DUOMENYS Diskinis pjūklas: - didžiausias pjūklo skersmuo 350 mm - velenas 30 mm - fiksuojamas velenas - disko reguliavimas priekin/atgal, aukštyn/žemyn Lhodeh I N Sfspfx Acuen - disko apsauga - variklis 1,1 kW - ištraukimo jungties skersmuo 80 mm Frezeris: Pjovimo velenas: - veleno skersmuo 40 mm - darbinis veleno aukštis 140 mm - fiksuojamas velenas - didžiausias frezos skersmuo 350 mm - 2 apsukų režimai: 3000, 4500 aps./min. - variklis 5,5 kW - stabdis - šoninis vežimėlis – rankinis stūmimas - vežimėlio matmenys ilgis/plotis 1180x600 mm - kampinis liniuotas - 2 pneumatiniai prispaudėjai - ištraukimo jungties skersmuo 120 mm - matmenys ilgis/plotis/aukštis 2600 (siuntimui 2000)/1600/1450 mm - svoris 735 kg – labai gera būklė – naudota pjovimo-frezavimo staklė Grynasis kaina: 13 900 PLN Grynasis kaina: 3 270 EUR (priklausomai nuo kurso, 4,25 EUR) (Kainos gali keistis esant dideliems svyravimams)

Sąlyga: naudotas, Formatinė diskinė pjovimo staklė Martin T 75 Prex sunki precizinė formatinė diskinė pjovimo staklė – dvipusis kampo reguliavimas Ašių pozicionavimo valdymas 5,7 colio jutikliniame ekrane Variklis 7,5 kW Priekinio įpjovimo agregatas / paruošta įrengti Didžiausias pjovimo aukštis 204 mm, pjūklo diskas Ø 250 - 550 mm Pjūklo diskas pasukamas nuo -46° iki +46° Aukščio ir kampo reguliavimas per valdymo pultą Paralelograminis skersinis stalas, dvipusiam įstrižo pjovimo nustatymui iki 46°, LCD ekranai, 0,01° pjovimo kampo tikslioji reguliacija Apipjovimo stalo ilgis 3200 mm Pjovimo plotis su lygiagrečliu liniuotės atitraukikliu 1100 mm automatinis pločio liniuotės reguliavimas per ašių pozicionavimo valdymą pasukamas valdymo pultas virš stalo Ilginė liniuotė – SKAITMENINĖ CE atitiktis Ledoxqm Rzjpfx Acuehn Įrenginys iš lizingo, pilnai atnaujintas DIRBTUVĖJE, PUIKIOS BŪKLĖS sandėlyje Lieboch / Galima lizinguoti

Sąlyga: naudotas, Formatinė diskinė pjūklas MARTIN T70 skirta medienai ir kitoms plokštinėms medžiagoms pjauti ir formuoti. Stalo ilgis: 2 500 mm Pjovimo aukštis: apie 100 mm Ledpfx Acexqfghjuehn

Sąlyga: naudotas, Gamybos metai: 1991, Valdymo pultas akių lygyje Aigner su integruotu ribotuvu, įskaitant pastūmos įrenginį su stumiamu vežimėliu (be ribotuvas-kreipiančiojo liniuotės). Frezavimo ribotuvas su skaitmeniniu indikatoriumi ir atlenkimo mechanizmu. Sandėliavimo vieta: Nattheim. Lhedpfx Ajv Ai N Uocujn

Sąlyga: naudotas, Gamybos metai: 2004, Įrenginys veikia tinkamai. Lodpfow Tbfgsx Acuohn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Tilting panel saw T74 by Martin with 3-axis scoring unit, 3m table and electro-motorized rip fence From vocational school Control panel at eye level with color touch screen control Sliding table length: 3000mm Saw blade tilting from 0 to 46 degrees Speeds: 2800, 4000 and 5500 rpm with electronic speed display Reinforced drive motor 7.5kW with automatic motor brake Saw blade diameter up to 500mm Saw spindle with Pro-Lock quick-change system Max. cutting height: 170mm Cutting width up to 1100mm, electrically adjustable, programmable and adjustable by hand Tilting angle and height adjustment electrically adjustable Crosscut fence with 2-point stop up to approx. 3350mm Parallelogram cross table with digital angle display Rip fence foldable Extraction ports 120 + 100mm Sliding carriage can be locked in any position Handle 1 set of plastic saw blade with matching 3-axis scorer, freshly sharpened Lhjdpfxsxp Rmds Acuon 3 riving knives 3-axis scoring unit, fully electrically adjustable while the machine is running 2 safety hoods Tool compartment Emergency off switch Operating manual CE mark Machine with minor signs of use on the anodized surface of the sliding table. Small nicks on the sliding table have been repaired. Original paint, only retouched in spots. Excellent condition from vocational school, as shown on the original pictures. Dimensions approx. 3150 x 3600 x 1700mm (LxWxH). Weight approx. 1950kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "further offers from this seller."

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7758 TECHNINIAI DUOMENYS Diskinis pjūklas: - Maksimalus disko skersmuo: 350 mm - Velenas: 30 mm - Velenas blokuojamas - Diskas reguliuojamas pirmyn/atgal, aukštyn/žemyn, kampas - Disko apsauga - Variklis: 1,1 kW - Atjungimo angos diametras: 80 mm Frezeris: - Frezavimo velenas: - Veleno skersmuo: 40 mm - Darbinis veleno aukštis: 150 mm - Velenas blokuojamas - Maksimalus frezos skersmuo: 350 mm - 2 sukimosi greičiai: 3000, 4500 aps./min. - Variklis apie 5,5 kW - Stabdis - Šoninis vežimėlis – rankinis stumdymas - Vežimėlio matmenys ilgis/plotis: 1180x600 mm - Kampuotoji liniuote - Pneumatinė prispaudimo sistema - Atjungimo angų diametras: 125 mm - Matmenys ilgis/plotis/aukštis: 1750/2600 (siuntai 1200)/1400 mm Lodpfxoxhdqgj Acujhn - Svoris: 715 kg PRIVALUMAI – Vokietijos gamyba – Labai gera būklė – Naudotas žibalinukas Grynasis kaina: 13 900 PLN Grynasis kaina: 3 270 EUR, priklausomai nuo 4,25 EUR kurso (Kainos gali keistis dėl didesnių svyravimų)

Sąlyga: naudotas, Gamybos metai: 1996, bendras ilgis: 3 900 mm, bendras plotis: 2 100 mm, bendras aukštis: 1 520 mm, - Max. cutting height [mm]: 550 - Sliding table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Saw blade bore diameter [mm]: 30 - Dust extraction port diameter [mm]: 120 - Options: Scoring unit - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Scoring saw: - └ Scoring blade diameter [mm]: 120 - └ Scoring blade bore diameter [mm]: 22 Lhsdpfjxdlx Rox Acujn - Year of manufacture: 1996 - Documentation available: No - CE marking present: Yes - Serial number: V233567 - Voltage [V]: 400 - Power consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (L x W x H) - Transport packages [pcs.]: 1 Financial Information VAT: The quoted price is subject to VAT. VAT/margin scheme: VAT deductible for businesses. Delivery and trade-in always possible for all types of industrial equipment. Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 1996, Slystuvo ilgis: 3300 mm Pjovimo plotis ties paraleliniu atmušėju: 1000 mm Pjovimo plotis ties skersiniu atmušėju: 3200 mm Pjovimo gylis: 170 mm Išankstinis pjūvis: taip Pjūklo disko aukščio reguliavimas: hidraulinis Pjūklo disko posvyrio reguliavimas: hidraulinis Paralelinio atmušėjo reguliavimas: rankiniu ratu Lhedpfsxnhp Hsx Acujn Pjūklo disko kampo rodymas: skaitmeninis Pjovimo aukščio rodymas: skaitmeninis Paralelinio atmušėjo rodymas: skaitmeninis ekranas Skersinio liniuotės rodymas: skalė Pjūklo disko diametras: 500 mm Sukimosi greičiai: 2800 / 4000 / 5500 aps./min Variklio galia: 5,5 kW Nusiurbimo jungtis: 100 mm ir 120 mm Staklių ilgis: 3550 mm Staklių plotis: 2200 mm Svoris: apie 1400 kg

Sąlyga: naudotas, Gamybos metai: 1995, su išankstiniu pjovikliu, slankiojančia platforma 3300 mm, pjovimo plotis: 1050 mm, variklis 5,5 kW, galinis lygiagretus atmušas rankiniu būdu nuleidžiamas, skaitmeniniai indikatoriai: pasvirimui, lygiagrečiam atmušui, pjovimo aukščiui, lygiagretaus atmušo reguliavimas rankiniu ratuku. Sandėlio vieta: Nattheim Lhjdpfjwbfyxjx Acuon

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Martin 718 Metai 1990-2000 Prefeeder Serco, metai 2000 2 spalvų Flexo Rotacinis štampavimas Lankstymo ir klijavimo stotis Counter ejector Siebeck apvyniojimo mašina, metai 1996 Paletizer Martin Manut, metai 1996 Lhsdpfxjxl Au Es Acujn

Sąlyga: geras (naudotas), Gamybos metai: 2002, Robust swiveling moulding machine T 26, tiltable from -45 to +45 degrees, equipped with 2-axis positioning control Duocontrol Swiveling spindle moulder in excellent configuration A treat for every Martin enthusiast Pole-reversible drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Swivel angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed on the top screen and can then be set at the stop; therefore, settings can be made directly from technical drawings Four spindle speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, quick-change spindle system with torque wrench Electrically adjustable fence, entry jaw adjustable via hand wheel and SIKO counter Manual axis operation or automatic positioning of height and fence Fence can be swung away with lifting device (for curved milling tasks) Table opening via eccentric table rings, electrically adjustable Table extension right and left with pull-out workpiece support Support can be extended by 700mm Table length approx. 2400mm Flip-down fence for plunge milling Original Martin aluminum fence jaws with double ribbing Workpiece pressure device Aigner Centrex 3-roller power feed HolzHer 1117, with 8 speeds, forward/reverse, new rollers Feed socket switchable from the control panel Extraction ports 2 x 120mm Compressed air connection 6 bar Emergency stop button Some parts of the machine have been newly repainted Approx. 7,400 operating hours Instruction manual CE marking Dimensions approx. 3000 x 1700 x 1830 mm (LxWxH). Weight approx. 1800 kg. Lodpfx Acsvv H T Roujhn The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this supplier”.

Sąlyga: naudotas, Obliavimo staklės MARTIN T51 - naudotos - triukšmą slopinančios darbastalio briaunos, vedimo liniuotė, variklio stabdis ----- Techniniai duomenys ----- Obliavimo plotis: 51 mm, Stalo ilgis: 2 520 mm, Maks. drožlė: 16 mm, Obliavimo veleno skersmuo: 120 mm, Peilių skaičius: 2 vnt., Kreipiančiosios pasukimo diapazonas: 0-45°, Išsiurbimo anga: 140 mm, Variklio galia: 4,8 kW Lhjdpfjxm R Upex Acuen

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, Tilting Spindle Moulder MARTIN T25 Very good condition; the machine comes from a correctional facility and has only been idle in recent years. It has seen minimal use and was operated by a single person. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1989. The machine features a control panel mounted on the top. The fence stop on the spindle fence allows for depth adjustment with fine adjustment and scale, enabling operations such as jointing work, e.g. on a glue joint profile. The complete spindle fence can also be adjusted in depth using a handwheel and leadscrew, allowing for very precise and fast setups. Additionally, one of the two fence jaws is tiltable. With spindle lock lever. Excellent chip extraction with two dust extraction ports: 125 mm on the spindle fence and 100 mm on the machine table. Equipped with a 30 mm spindle, steplessly tiltable from -5° to +45°. Tilting is carried out electrically with a digital display. With clockwise/counter-clockwise rotation. The machine is personally delivered and demonstrated by us anywhere in Germany for €220. This means you incur no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. Features a large table opening up to 480 mm, which can be reduced using different rings (allowing the use of cutters with a very large diameter as well as enabling safe operation with small cutters). Rotational speeds: 3,000, 4,500, 6,000, and 9,000 rpm. Spindle height adjustment is also electric, with a digital readout. The table is made of heavily ribbed grey cast iron. With interchangeable spindle (a 40 mm spindle can also be used). Very robust and durable design; the machine was built for heavy-duty milling and is suitable for all milling operations. Optimal power transmission via V-belt drive. Includes operating manual. Supplied with 3-roller feed unit STEFF, type 34. The power feeder features forward/reverse operation and 4 speeds; each feed roller is individually mounted. The machine table is 1,180 mm wide and 800 mm deep. Lhedpfsxn A H Tex Acusn Ready for immediate operation. 380 V, with 5,000 and 6,000 W via two speed settings. Fitted with all necessary safety devices, motor brake and emergency stop; machine is certified by the German Woodworkers’ BG (occupational safety authority), and bears the GS safety mark. Machine weight approx. 1,200 kg. With motor overload protection switch. Professional equipment, not DIY store junk. Optimal, simple, fast, and safe handling.

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Lhjdsqlck Nepfx Acuon Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: naudotas, įsk. 3-ritininę padavą, įsk. Aigner stalo praplėtimus Sandėliavimo vieta: Tiekėjas Ledpfxjw N Sz Rj Acushn

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Lodpfx Aoqlckpecujhn Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Lhodpfx Acopgkmwjuon Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Sąlyga: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Lhedpfx Aopq If Dscusn Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: geras (naudotas), Gamybos metai: 1982, Naudota storio obliavimo staklė Gebr. Martin, tipas: T 42 Pagaminimo metai: 1982 Obliavimo plotis: 630 mm Obliavimo aukštis: 250 mm Padavimo greitis: 8-20 m/min Nusiurbimo jungtis: 160 mm Lhsdpst U Rn Ssfx Acujn Svoris: apie 870 kg Gumuoti įvado ir išvado volai Dvivietis peilių velenas su tiesiais obliavimo peiliais Centrinis tepimas Obliavimo aukštis reguliuojamas rankiniu ratuku Žvaigždės–trikampio jungiklis Vieta: sandėlyje 54634 Bitburg - galima iš karto -

Sąlyga: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel fence operated by handwheel T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Lhodpfx Acev Erkajuon Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.

Sąlyga: naujas, Gamybos metai: 2025, Martin Panel Saw T 77 - new stock machine - Top features - Double-sided tilting - Equipment: T 7710/2-a Saw Unit Prex - tiltable on both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Stepless drive power 5.5 kW T 7730/4-a Sliding table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled rip fence, can be lowered into end position T 7755-a 3-axis scoring unit T 7757-a Scoring saw lighting Safe Light T 777572-a Angle cutting system RadioCompens with continuous fence T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable safety hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at Classic operating level Ljdpfew D T Dkjx Acujhn Location: ex stock 54634 Bitburg - immediately available -