Vakuuminio dažymo ir šlifavimo mašina

Makor Gemini 56

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Njdpfxou Thbxj Adujli Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size Nsdpfxou Thyps Adujli - Control cabinet air conditioning - Machine base height increase: 200 mm Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Nlsdpehw Ng Iefx Aduoi 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Nodjhlp Efopfx Adusli

Sąlyga: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° Nledpjdfgg Isfx Aduei C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Gamybos metai: 1988, Sąlyga: reikia remonto (naudotas), Mechanizacija prieš obliavimo stakles, skirta KVH/BSH – ilgiams iki maždaug 13 m. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis atskyrimas – vienetinis išskirstymas. 4 vnt. reguliuojamų šoninių diskinio pjūklo skersinio pjovimo staklių. Pjovimo skerspjūviai: 180 x 220 mm, 150 x 300 mm. Pakanka vieno operatoriaus. Nledpfevbtpox Aduoi

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: b-r-l-t-t-b Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Chamfering unit included Nsdporq Ebfefx Aduoli Separate motor for each spindle Electronic feed with brake, infinitely variable 5-40 m/min Durofer spike-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS SYSTEM CE mark Declaration of conformity

Sąlyga: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Constant table height (consistent infeed height) Max. planing width: 600 mm Max. planing height: 280 mm Nodpfx Ashuthyjduoli Planer heads with strip knives Immediately ready for operation

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Η μηχανή βρίσκεται ακόμη σε παραγωγή. Μπορεί να επιθεωρηθεί στην Ελλάδα. Είναι έτοιμη προς χρήση. Nledpov A I E Ijfx Aduoi

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Valukojutehas müügis, kinnistul on kokku 15 hoonet ja 6 hektarit maad. Asub Karhula tööstusalal Kotka linna kõrval, Lõuna-Soome kaguosas. Karhulan Valimo rajati 1880. aastatel. 1902. aastal ühendati valukoda puidugrinde, klaasivabriku, tellisevabriku ja masinaehitustöökojaga, moodustades Karhula Oy. 1915. aastal müüdi Karhula tehased Ahlströmi korporatsioonile. Praegune valukoda ehitati 1960. aastal ning 2000. a müüs Ahlström valukoja Sulzer Pumps Finlandile. 2016. aastal otsustas Sulzer Pumps valukoja sulgeda ning see müüdi Karhulan Foundry Oy-le, mis kuulutati kahjuks 2021. a märtsis pankrotistunuks. Valukoja ajaloos on see olnud tuntud eriti kõrgaalise terase keerukate valude valmistamise poolest. 2022. aastal ostis Karhu Assets Oy valukoja hooned ja seadmed. Suurem osa puhastustsehi seadmetest on juba müüdud, kuid enamik vormitsehi ja sulatusosakonna masinaid on veel alles ja saadaval. Kõik kuumtöötlemisahjud, kokku 10 seadet, on kohapeal ja müügiks valmis. Olete oodatud tehast kohapeal külastama! Seadmed asuvad Kotkas, 48600, Soomes ning müüakse tingimustel EXW Kotka, olemasolevas seisukorras. Enamikest Euroopa linnadest Helsingisse kestab lend umbes 2 tundi ning Helsingist Kotkasse on mööda maanteed umbes 120 km (1 tund autosõitu). Olete teretulnud ise kohapeale tulema ja valukojaseadmeid üle vaatama! Kasutatud seisukord: Kõik masinad, seadmed ja esemed müüakse kasutatud seisukorras. Garantii, vahetus- või tagastusvõimalus puudub: Müüja ei paku müüdavatele esemetele garantiid ega tagatist. Vahetus- või tagastusvõimalust ei ole, ostja võtab endale kõik ostuga seotud riskid. Nledpfeuxmt Tjx Adusi Nagu kohapeal üle vaadatud: Ostja peab kauba enne ostmist kohapeal üle vaatama, tehing on pärast ülevaatust lõplik. Müüja ei vastuta pärast ostu avastatud puuduste eest.