Mütek Systemtechnik Mgp 60 pirkti naudotą (21 513)

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Bdsdpfx Afev Rpxlj Aob Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result Bdodpogl Nlmjfx Af Ajb

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Bodpjrb D Njfx Af Ajdb Airflow 1850 m³/h / 400 V

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material Bodjgfm Ryepfx Af Ajdb . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times Bdsdpfxsdwktks Af Aob - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Bdodpfx Afjchuvre Asb Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers Bdedpfx Asffh Atof Aeb + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, The ideal machine for cable shredding including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, hydraulically operated ram Perforated screen as per choice (15 - 40mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double blade row + €995 net (28 instead of 14) - Surcharge for four-sided segmented floor + €3,750 net Bdsdogmfa Ajpfx Af Asb (Prevents ram blockage. Recommended for shredding plastics, paper, veneer with a thickness less than 3 mm). - Raise shredder height by 30 cm (preparation for conveyor belt) +€1,980 net - Angled conveyor belt (discharge height approx. 220 cm) +€8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Material requirements: - Mineral contamination such as sand, stones, etc. will increase wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material by forwarding agent and we will document the test with pictures and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Bsdpfjd Su Hxsx Af Ajdb Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Gamybos metai: 2020, veikimo valandos: 100 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 300 kg, bendras ilgis: 1 330 mm, bendras plotis: 840 mm, bendras aukštis: 1 870 mm, suslėgto oro jungtis: 6 juosta, įvesties srovės tipas: Oro kondicionierius, Kroviklis padėklų krautuvas Traystapler perstatymo įrenginys Tray-Loader TL-6040 – dviejų takelių padėklų (dėžių) krovimo-nukrovimo modulis ekonomiškam LED plokščių padėklų transportavimui. Tušti padėklai paimami iš transportavimo vežimėlio, automatiškai pozicionuojami ir paruošiami užpildymui. Užpildžius, padėklai automatiškai nukraunami ant antro transportavimo vežimėlio. Bdedpjxuqtbefx Af Aob • Kompaktiška konstrukcija • Mažas užimamas plotas • Krovimo-nukrovimo modulis • Transporto vežimėlis • Standartinio padėklo dydis: 400 x 600 mm • Tvirta suvirinto plieno konstrukcija • I x P x A: 840 x 1.330 x 1.870 mm • Rankinio valdymo aukštis: 930 – 1.050 mm • Suslėgtas oras 0,6 mPa (6 bar), be alyvos, filtruotas, sausas • Vidutinės sąnaudos apie 10 l/min • Darbo temperatūra +18°C - +30°C • Svoris apie 300 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 100 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 300 kg, Tray Loader / Tray Stacker / Transfer Unit Tray-Loader TL-6040 – Transfer Unit - Dual-lane loading and unloading module for the efficient transport of trays (boxes) used for printed circuit boards (PCBs). Empty trays are removed from the transport cart, automatically positioned, and presented for loading. After loading, the trays are automatically stacked on a second transport cart. • Compact design • Small footprint • Up-down stacking module • Transport carts • Standard tray size: 400 x 600 mm • Robust welded steel frame • Dimensions (W x D x H): 840 x 1,330 x 1,870 mm • Manual operating height: 930 – 1,050 mm • Compressed air 0.6 MPa (6 bar), oil-free, filtered, dry • Consumption average approx. 10 l/min Bsdpfxjunh I No Af Aedb • Ambient temperature +18°C - +30°C • Weight approx. 300 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput highly dependent on screen and input material: - up to 60 kg/h when processing EPS with a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW – 400 Volt Bdodpsh S H T Uefx Af Asb Robust steel construction, hardened cutting knives, screen with interchangeable inserts, available perforations (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive, supplied with star-delta switch, overload protection, and 8 m power cable, plug-ready. Discharge spout: 150 mm, optionally suitable for plastic or grain pipes, blowing distance approx. 12 m. Chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires. Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Būklė: labai geros būklės (naudotas), Catalog number 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - toothed feed roller - return pawls - 2 pressure rollers - toothed feed roller - pressure roller - planing shaft 610 mm, 4-knife, 7.5 kW - pressure rollers - smooth feed roller From below: - guide rail - adjustable infeed table with smooth, split sliding roller - planing shaft 610 mm, 4-knife, 5.5 kW Bedpfx Ajytdkxjf Ajdb - 2 smooth sliding feed rollers - side pressure roller From the rear: - side spindles + 2 pressure rollers: 1) right vertical 5.5 kW 2) left vertical 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) additional horizontal spindle 160 mm, adjustable up/down, left/right, and angle, approx. 4 kW - Option to plane with the additional spindle from above/below/side - Spindle diameter 35 mm - Adjustable rollers in the lower table - 2 feed speed levels - Feed motor 2.2 kW - Extraction port diameter 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Weight approx. 3000 kg ADVANTAGES - Wide planer for wet and dry wood - Ideal for processing beams, flooring, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Cutter heads included - Manufactured by German brand KUPFERMUHLE - Used planer, very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (exchange rate: 4.2 EUR) (Prices are subject to change due to exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7303 TECHNINIAI DUOMENYS - veleno plotis 640 mm - peilių kiekis 3 vnt - maksimali ruošinio storis 250 mm Iš viršaus: - sklendės - dantytas, traukiantis įvadas velenas - spaustukai - obliavimo velenas - spaustukai - lygus, traukiantis išvedimo velenas Iš apačios: - reguliuojami voleliai apatiniame stale 2 vnt. - variklis 7,5 kW - elektrinis stalo pakėlimas - kėlimo variklis 0,75 kW - 4 padavimo greičiai - padavimo variklis 1,5 kW - nusiurbimo jungties diametras 140 mm - matmenys ilgis/plotis/aukštis 1120x1250x1680 mm - svoris 1033 kg Bdsdpfx Aoymm Hcof Aeb – pagaminta Lenkijoje – naudota storio obliavimo staklė, labai geros būklės Originalios nuotraukos Grynasis kaina: 21900 PLN Grynasis kaina: 5200 EUR pagal kursą 4,2 EUR (Kainos gali keistis su dideliais svyravimais)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (two-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed drive shaft - Pawls - Pressure unit Bdodpfx Aeyz Sfbjf Aeb - 2 toothed drive shafts - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Smooth metal feed roller - Pressure unit - Profiling shaft, 7.5 kW - Pressure unit - Rubber feed roller Bottom side: - Planing shaft, spindle diameter 35 mm, shaft length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth drive shaft - 610 mm planing shaft, 4-knife (currently equipped with 2 knives), 7.5 kW - 2 smooth drive shafts - Split metal sliding roller - Side pressure Rear side: - Side spindles with 2 pressure units - 1) Right vertical spindle 95 mm, 4 kW - 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction ports diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight approx. 3500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing logs, flooring, etc. – Additional profiling shaft and planing shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: 66,900 PLN Net price: 15,930 EUR (based on 4.2 EUR exchange rate) (Prices may vary with exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Katalogo numeris 6815 Bodjytd A Uepfx Af Aodb TECHNINIAI DUOMENYS - veleno plotis: 640 mm - peilių skaičius: 4 vnt. - didžiausias apdirbamo elemento storis: 230 mm Iš viršaus: - dantytas įvedimo velenas, tempiantis, sekvencinis - spaustuvai - obliavimo velenas - spaustuvai - lygus išvedimo velenas, tempiantis Iš apačios: - volelis + įvedimo stalas - reguliuojamas velenėlis apatiniame stale - išvedimo stalas + volelis - variklis 5,5 kW - sklandus padavimo greičio reguliavimas - padavimo variklis 0,5 kW - ištraukimo antgalio skersmuo: 150 mm - matmenys (ilgis/plotis/aukštis): 1630x1630x1140 mm - svoris: 920 kg PRIVALUMAI – itališka gamyba – naudotas storio oblius, labai gera būklė Grynasis kaina: 17 900 PLN Grynasis kaina: 4 260 EUR Grynasis kaina apskaičiuota pagal kursą 4,2 PLN/EUR (didelių valiutų svyravimų atveju kaina gali keistis)

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 6935 TECHNINĖ INFORMACIJA - veleno plotis 630 mm - peilių kiekis: 4 vnt - didžiausias apdirbamo elemento storis: 210 mm * Iš viršaus: - saugos skląsčiai - dantytas įleidimo velenas, traukiantis - prispaudėjai - obliavimo velenas - prispaudėjai - lygus išleidimo velenas, traukiantis * Iš apačios: - reguliuojami volai apatiniame stale: 2 vnt - variklis 4,4 kW - 2 padavimo greičiai - matmenys (ilgis/plotis/aukštis): 1220x950x1060 mm Bdedjytd Uqopfx Af Ajb - svoris: 750 kg PRIVALUMAI – Vokiška gamyba – naudota storio obliavimo staklės, labai gera būklė Grynasis kaina: 16 900 PLN Grynasis kaina: 4 020 EUR Grynoji kaina apskaičiuota pagal kursą 4,2 PLN/EUR (kursui smarkiai svyruojant, kaina gali keistis)

Būklė: labai geros būklės (naudotas), Catalogue number 7640 Bdjdpfjyaq Taex Af Aob FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured in Germany by KUPFERMUHLE – Used planer in very good condition TECHNICAL SPECIFICATIONS - Maximum planing width: 610 mm - Maximum planing height: 200 mm - Top section: - Powered infeed shaft, toothed - Pawls - Pressure unit - 2 driven shafts, toothed - Pressure unit - Planing shaft 610 mm, 6 knives, 15 kW - Pressure units - Outfeed shaft, smooth, powered - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Driven shaft, toothed - Planing shaft 610 mm, 6 knives, 7.5 kW - 2 driven shafts, smooth - Side pressure at outfeed - Rear section: 2 vertical spindles + pressure units: 1) Right vertical 200 mm, 15 kW 2) Left vertical 200 mm, 15 kW - Left vertical spindle electrically adjustable (right/left) - Spindle diameter: 40 mm - Alternately adjustable spindle position - Spindles adjustable up/down, right/left 3) Additional bottom horizontal spindle 160 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal slip rollers, 2 lower driven rubber rollers - Adjustable rollers in bottom table - Electric planing height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed drive motor: 8 kW - Extraction port diameters: 2×120, 2×160 mm - Dimensions (LxWxH): 2980x1980x1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7732 Bdedpeyfhiijfx Af Aob TECHNINIAI DUOMENYS - spaudimo jėga: hidraulinė - briketų forma: apvali - briketo skersmuo: 70 mm - bunkerio skersmuo: 1200 mm - našumas: apie 70 kg/h - automatinis mašinos veikimas - variklis: 7,5 kW - maks. darbinis slėgis: 150 bar - atsiurbimo jungtis: 90 mm - filtro maišo angos skersmuo: 500 mm - maks. maišo aukštis: 900 mm - matmenys (ilgis/plotis/aukštis): 1950x1400x2700 mm - svoris: 1130 kg PRIVALUMAI – itališka gamyba – galima tiesiogiai prijungti prie pjuvenų ištraukimo sistemos – naudota briketavimo mašina – DTR dokumentacija – labai gera būklė Grynoji kaina: 29 900 PLN Grynoji kaina: 7 120 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Hedelius RS 60 K - 2000 Pagaminimo metai: 2005 Valdymas: Bodpfsy H D S Dsx Af Aedb - Heidenhain iTNC 530 - elektroninis rankenėlės ratukas Pagrindinis velenas: - SK40 - Maksimali veleno apsukų sparta 15000 aps./min. Eigos: - X - 2000 mm (775 + 600) mm, Y - 620 mm, Z - 520 mm Stalas: - Stacionaraus stalo tvirtinimo plotas 1200 x 600 mm (kairė darbinė zona) - NC pasukamas sukamasis stalas (dešinė darbinė zona) - NC pasukamas sukamasis stalas sukasi 360° / pasukamas +15 / -95° Aušinimo skystis: - 20 barų vidinis aušinimas - Drožlių transporteris Ištraukimas: - Emulsijos rūko atskyrimo įrenginys Pristatymo laikas: - Iškart

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, bendras svoris: 150 kg, bendras aukštis: 2 300 mm, bendras ilgis: 1 200 mm, bendras plotis: 600 mm, valdiklio modelis: SPS-Steuerung, darbinis plotis: 300 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, suslėgto oro jungtis: 6 juosta, apkrova vienai atramai: 50 kg, stalčių skaičius: 1, pozicionavimo tikslumas: 1 mm, darbinio aukščio: 30 mm, darbinis ilgis: 400 mm, darbo diapazonas: 400 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) • Tray weight including workpieces max. 5 kg Bdsdpfx Afsyx Hgbe Asb • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm • PLC control with operator and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar • Dimensions: 1200 x 600 x 2300 mm (LWH)

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 120 kg, bendras ilgis: 900 mm, bendras plotis: 1 500 mm, bendras aukštis: 2 050 mm, įėjimo įtampa: 230 V, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, kartojimo tikslumas: 0,01 mm, lazeri tipas: šviesolaidinis lazeris, Įranga: USB jungtis, apšvietimas, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a broad range of marking applications. With its integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, laser technology has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and part numbers can be automatically incremented by the software once previously set. In addition, the software can read data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. Bsdpfxoyxccre Af Ajdb Standard equipment includes an integrated PC with a Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side-mounted arms for long workpieces, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic determination of focal distance • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp for operating status indication • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions approx. 900 x 800 x 1900 mm (LxWxH) • Weight approx. 120 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, frezos galvos padėtis: mittig, veleno greitis (maks.): 60 000 aps./min, bendras aukštis: 1 550 mm, bendras ilgis: 1 870 mm, bendras plotis: 1 040 mm, sukimosi greitis (maks.): 60 000 aps./min, įvesties srovės tipas: trifazis, bendras svoris: 560 kg, darbo diapazonas: 420 mm, garantijos trukmė: 12 mėnesiai, pavaros tipas: Linearmotor, Įranga: sūkių greitis be galo kintamas, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the increasing demands of the production process. PCBs of various materials are separated using dust-free and low-stress sawing and milling techniques, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, advanced tooling, and gripping systems meet the highest quality standards, guaranteeing the machine's long service life and reliability. Semi-automatic depaneling – tailor-made solutions The LOW 4322 enables rapid product changeovers while maintaining short separation and handling times. Loading of panelized PCBs is done with a parallel shuttle system, with positioning and clamping using pin-clamping technology, optionally in combination with vacuum suction, when required. Made in Germany The machine is equipped with: • One shaft and disc tool separation module on the Z-axis (automatically rotatable 0–90°) • X-Y cross table module using linear motor technology with high-resolution scale system • Dual loading module set up as a parallel shuttle, separated left/right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area: 420 x 330 mm per side • Automatic milling cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage detection (for shaft cutters only) • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant Optionally, a dust extraction unit can be retrofitted upon request. Bsdpjxt Dk Refx Af Asdb

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, bendras plotis: 600 mm, bendras ilgis: 1 200 mm, bendras aukštis: 2 300 mm, bendras svoris: 150 kg, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, darbo diapazonas: 400 mm, produkto aukštis (maks.): 30 mm, valdiklio modelis: SPS-Steuerung Siemens Simatic HMI, įėjimo dažnis: 50 Hz, suslėgto oro jungtis: 6 juosta, apkrova vienai atramai: 50 kg, pozicionavimo tikslumas: 1 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, apšvietimas, dokumentacija / vadovas, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) Bdsdpsyx Hrkefx Af Asb • Tray weight including workpieces max. 5 kg • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm • PLC control with operator and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar • Dimensions: 1200 x 600 x 2300 mm (LWH)

Gamybos metai: 2025, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for secondary shredding of wood chips. Further details available after a test run with your material. Our granulators are used for size reduction of various materials, such as plastics or wood. Shredders and granulators are suitable for a wide range of size reduction tasks. For example, during injection moulding, reject parts and sprues are produced which need to be reprocessed. In blow moulding operations, there are not only reject parts but also trim scrap or start-up parisons. Materials that can be processed include blow moulded products such as PET bottles, PE/PP bottles, canisters, or buckets and pipes. The material is fed from above into the grinding chamber of the granulator via a hopper. The rotor inside is equipped with cutting knives. Material is cut between the rotating blades and the stationary blades housed in the grinding chamber until, once it reaches the defined granulate size, it falls through the screen located under the rotor. *Option: The ground material can then be pneumatically conveyed into big bags, silos or other containers. The price applies only to the granulator system as shown in picture 1 - Fan, cyclone and filter are optional. --- Technical data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Shredding PE 1000 plastic Feed size: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) Significantly higher throughputs can be achieved when post-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen. *If metered, e.g. via conveyor belt or auger. Details after test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, 225 mm each 4 stator knives, 225 mm each Dimensions: 930x730x1420 mm Weight: 450 kg, Suction connection: 100 mm, Screens: 6, 8 and 15 mm – further screens available, Price per screen: €390 Price for spare knife set: €679 Suitable, for example, for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620x400 mm *optionally with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620x500 mm *optionally with matching extraction/transport system --- Bdeded N Dn Dspfx Af Asb For configuring the machine, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) do you require? - Required hourly throughput in kg? - Wall thickness in mm? - Material description Photos can also be helpful.