Krones Krones Checkmat 731 Užpildymo Lygio Kontrolė (2014 M.) pirkti naudotą (77 144)

Būklė: naudotas, Gamybos metai: 2014, Overview This fill level and closure inspection device was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement, as well as for closure inspection of metal caps via sensors integrated into the filler. The system was recently dismantled in fully operational condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger photoelectric sensors, encoders, and pushers were properly disconnected and are included in the delivery. Technical Data Inspection functions: - Overfill and underfill detection using HF (high-frequency) method - Closure inspection with integrated sensor for metal caps (mounted in the filler) Condition: Excellent, fully functional prior to dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beverages with metal closures Gjdpfx Apjyb Sk No Ijiu Included components: Trigger sensors, encoder, and pusher

Būklė: naudotas, Gamybos metai: 2019, Overview The fill level control unit was manufactured in 2019 by the German company Krones. The machine is currently not installed. Technical details: Capacity: 50,000 bph Inspection via gamma ray technology Krones Checkmat with discharge table and pusher Godsl Hxniepfx Ap Ieiu

Būklė: naudotas, Gamybos metai: 2017, Overview This fill level and closure inspection system was manufactured in 2017, and the label inspection machine in 2015, both by the German company Vision-Tec. The pusher was produced by the German company BBULL. The inspection system is designed for checking the fill level, closure, and label of filled bottles. The machine will remain in operation until October 2025. Technical Data Performance: Adjustable Scope of Delivery Fill level inspection | Vision Tec | 2017 Label inspection | Vision Tec | 2015 Ejection system | BBULL Godpoyhm D Rjfx Ap Ijiu

Būklė: naudotas, Gamybos metai: 1999, Overview This PET filler was manufactured by KRONES in Germany in 1999. It is designed for filling carbonated soft drinks into PET bottles and is equipped with a Pick & Place neck handling system. The machine is immediately available and can be inspected upon request. Technical Data - Capacity: 27,000 bph with 1.0L PET - 25,000 bph with 1.5L PET - 22,500 bph with 2.0L PET - Formats: 1.0L, 1.5L, 2.0L PET bottles - Closures: PCO 1881, plastic screw caps - Filling system: Isobaric - Number of filling valves: 126 - Capper: Screw Capper 720-18-126 (Alcoa) - Direction of operation: Right-to-left (counterclockwise) - Neck handling with Pick & Place system - Product: Carbonated soft drinks (8 g/l CO₂, 20°C) - Machine pitch: 144 - Machine safety: Full guard – lifting version - Control system: Siemens S7 Scope of Delivery Gedpfx Aowiizpsp Ijiu - Krones Sensometic VP-I-PET filler - Screw capper from Alcoa (720-18-126) - Krones Checkmat Pick & Place neck handling system - Integrated foam control system - Neumo shut-off valves

Būklė: naudotas, Gamybos metai: 2018, Overview The fill level and closure inspection system was manufactured in 2010 by the German company KHS. Evaluation is performed using the label inspector from Indspect. The system is designed for checking the fill levels, closures, and labels on filled bottles. The machine was operational until January 2025 and is now stored within the company. Technical Data Capacity: up to 25,000 bottles/hour Scope of delivery Fill level and closure control system | KHS Label inspection system | Indspect Godswhw Sgjpfx Ap Ieiu

Būklė: naudotas, Gamybos metai: 1996, Apžvalga Ši izobarometrinė PET butelių pildymo ir uždarymo mašina buvo pagaminta 1996 m. Vokietijos įmonės Krones. Blokinė sistema apima ALCOA uždarymo mašiną skirta srieginiams kamšteliams ir Gassner kamštelių padavimo sistemą. Tinka gazuotiems gaiviesiems gėrimams. Mašina jau nebenaudojama gamyboje, tačiau vis dar prijungta. Techniniai duomenys Pildymo ir uždarymo mašina – blokinė sistema Pildymo stočių skaičius: 132 Uždarymo stočių skaičius: 30 Izobarinis pildymo sistema tinkama gazuotiems gaiviesiems gėrimams Uždarymo sistema: ALCOA Kupi 30/1080 srieginiams kamšteliams Kamštelių padavimo sistema: Gassner Pajėgumas: 36 000 vnt./val. (1,0 l talpos) įskaitant butelių kaklelio valdymą Butelių kėlimo cilindrai Kryptis: kairė–dešinė / pagal laikrodžio rodyklę Giodpfxjydbrbj Ap Isu

Būklė: naudotas, Gamybos metai: 2019, Overview This fill level inspection machine was manufactured in 2019 by the German company HEUFT. It is designed for monitoring the fill level and closure of filled bottles. The system is immediately available and still installed. An on-site inspection is possible. Technical data Capacity: up to 72,000 bottles/hour Formats: 75 cl Inspection features: fill level and closure inspection Scope of supply Fill level inspection system | HEUFT | PRIME | 2019 Ejection system | HEUFT | DELTA-FW | 2019 Bottle conveyor (10 meters) Gsdpfx Apewfq Nte Ieiu

Būklė: geras (naudotas), Siūlau pramoninį vertikalų siurblį iš žinomo vokiečių gamintojo ALLWEILER GmbH – modelis NLT 50-200. Siurblys skirtas nuolatiniam darbui pramoninėse, vandentiekio ir technologinėse sistemose. Įranga visiškai komplektuota su elektros varikliu. Naudotas – matyti sandėliavimo žymės ir paviršinės korozijos požymiai. ⚙️ Techniniai duomenys gamintojas: ALLWEILER (Vokietija) tipas: NLT 50-200 gamybos metai: 2014 našumas: 75 m³/h keliamoji aukštis: 48 m apsukos: 2900 aps./min galios variklis: 11,6 kW maitinimas: 400V (50 Hz) 460V (60 Hz) jungties skersmuo: apie 65 mm konstrukcija: vertikali (vertikalus inline siurblys) ✅ Techninė būklė siurblys su varikliu nėra matomų mechaninių pažeidimų laisvai sukasi išvaizda kaip nuotraukose (sandėliavimo žymės, rūdžių pėdsakai) Gedjyxtfwspfx Ap Ieiu

Būklė: naudotas, Gamybos metai: 2014, Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German company Krones. The machine is designed for inspecting empty glass bottles prior to filling in beverage bottling plants. It is still in operation and will be professionally dismantled at the beginning of 2027, as the entire bottling line will be replaced. Technical Data Performance: currently running at 18,500 bottles per hour, but capable of operating at significantly higher speeds. Formats: 0.75 L bottle, 0.5 L bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules, including base inspection, finish (lip) inspection, thread inspection, mouth/closure inspection, sidewall inspection, residual liquid detection, foreign body detection, bottle height control (tolerance ±2.5 mm) Inspection Systems: - Base inspection (camera) - Finish inspection - Thread inspection (conical optics) - Mouth/closure inspection - Sidewall inspection with LED illumination - Detection of transparent films on the bottle base and sidewall - Detection of scuffing using a sidewall camera - Residual liquid detection via infrared system and high-frequency detection Rejection Systems: - Rejection of foreign containers at the infeed - Rejection of contaminated bottles at the outfeed - Separate rejection of bottles with damaged finishes or threads Direction of Operation: Left to right Gijdpezb Afqjfx Ap Ieu

Būklė: naudotas, Gamybos metai: 2003, Overview This 2003-built Krones Robot 3A de-palletizing robot is designed for the automatic handling of filled beverage crates on Euro pallets. The system is used for unloading complete layers of crates from pallets. The machine handles 1.0-litre PET crates in an 8-crate layer pattern and is configured for crates with dimensions of 400 x 300 x 310 mm on Euro pallets measuring 1200 x 800 x 144 mm. During operation, a mechanical gripper head lifts an entire layer of beverage crates from the pallet and moves it horizontally within the unloading area. The system is equipped with an MTS 10 control panel, which displays the program sequence and pallet handling status. The working area is secured by safety fences and access doors. Technical Data Manufacturer: Krones AG / Kettner Machine type: Robotic unloading system / crate de-palletizing robot Model: Kettner Robot 3A Year of manufacture: 2003 Application: Automatic unloading / de-palletizing of beverage crates Layer pattern: 8-crate layer configuration Crate dimensions: 400 x 300 x 310 mm Pallet type: Euro pallet, 1200 x 800 x 144 mm Gisdpfx Apjzb Adyo Isu Handling system: Mechanical gripper head for complete crate layers Operation: Layer-wise unloading from the pallet HMI / Control panel: MTS 10 Conveyor system: Pallet roller conveyor Safety: Protective fencing, mesh door, operator panel, and emergency stop Power supply: 230 / 400 V AC Current type: 3-phase Frequency: 50 Hz Rated current: 37 A Condition: Used, installed in an industrial bottling and crate handling environment

Būklė: naudotas, Gamybos metai: 2002, Overview This palletizing robot, manufactured in 2003, is a Krones / Robot 3A model designed for the automatic palletizing of beverage crates. The system is intended for arranging complete crate layers on Euro pallets. The machine processes 1.0-liter PET crates in an 8-crate layer pattern and is configured for crates measuring 400 x 300 x 310 mm on Euro pallets with dimensions of 1200 x 800 x 144 mm. In operation, the mechanical gripper head picks up full layers of black beverage crates and places them onto pallets. The system is equipped with an MTS 10 control panel that displays the program sequence, palletizer status, and product configuration. The working area is secured by protective fencing and access doors. Technical Data Manufacturer: Krones AG Gedpszb Ac Aofx Ap Ieiu Machine type: Robotic palletizing system / crate palletizer Model: Krones Robot 3A Year of manufacture: 2003 Application: Automatic palletizing of PET beverage crates Layer pattern: 8-crate scheme Crate dimensions: 400 x 300 x 310 mm Pallet size: Euro pallet, 1200 x 800 x 144 mm Handling system: Mechanical gripper head for complete crate layers Operation: Layer-by-layer palletizing onto pallets HMI / Control panel: MTS 10 Conveyor system: Pallet roller conveyor with pallet magazine / pallet handling area Safety: Safety fencing, mesh doors, control panel, and emergency stop Power supply: 230 / 400 V AC Power type: 3-phase Frequency: 50 Hz Rated current: 41 A Condition: Used, installed in an industrial bottling and crate handling environment

Būklė: naudotas, Gamybos metai: 2012, Overview This bottling line for returnable glass bottles is composed of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer, and other suppliers. The line is designed for handling returnable glass bottles in crates, primarily in 0.33-litre and 0.75-litre formats. It includes all key process steps from crate depalletizing, crate sorting, bottle uncapping, unpacking, bottle washing, empty bottle inspection, filling and capping through to labelling, full bottle inspection, crate packing, crate inspection, and palletizing. The existing crate depalletizer and palletizer are available on-site; however, due to their age and outdated technology, it is recommended that these units are not included in the purchase of the system. Alternatively, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The system has a nominal filling capacity of approx. 18,000 bottles per hour, and the premix system is designed for 22,000 l/h. Dismantling of the plant is planned for February 2027. Technical Data System type: Bottling line for returnable glass bottles Application: Filling of beverages into returnable glass bottles Formats: 0.33-l and 0.75-l glass bottles Packaging: Bottles in crates Filling capacity: 18,000 bottles/hour Premix capacity: 22,000 l/hour Closure type: Plastic screw caps Labelling: Wet glue labelling, 2 stations Manufacturing years of main machines: 1996 – 2016 Planned dismantling: February 2027 Scope of delivery Crate depalletizer | Existing on-site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated Crate sorting system | Syscona | Expert KSA | Two-lane sorting: good / bad | 2014 Crate uncapping machine | RINK | KM 690/4K | 2012 Crate unpacker | Kettner | Robot Junior RA3/C-T | 1996 Bottle washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 Crate washer | Bohrer | R 30 | crate washing machine | 2011 Empty bottle inspector | Krones | Linatronic | 2014 Filler / screw capper | Krones | Volumetic / Modulfill | 2012 Labelling machine | Krones | Universella | 2012 Closure inspection | Syscona | Expert FHK | 2016 Godpfx Aoza Tx Sep Isiu Inspection system | Krones | Checkmat 731 | 2012 Crate packer | Kettner | 1996 Crate inspection | Krones | Checkmat 708 | 2011 Palletizer | Matec | Rotomat 3B | 2002 Falterbaum | 20000TD | Premix system; capacity 22,000 l/h | 2000

Būklė: geras (naudotas), laisvas tarpatramis: 1 400 mm, bendras ilgis: 7 510 mm, lentynos aukštis: 1 750 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Installation technical details: Number of racking rows: 01 piece Length per row: approx. 7,510 mm Number of bays per row: 05 pcs, each 1,400 mm Number of levels plus floor level: 02 pcs Scope of delivery includes: 06x pallet racking uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. horizontal and diagonal bracing, foot plates The uprights are pre-assembled (bolted lattice structure) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Giodpfx Apow I R Slo Ieu Material color: orange U-profile: 150 x 50 x 3.00 mm Connector: 4 hooks Type: end beam Clear span: 1,400 mm 40x safety pins, used Material finish: sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Design: fully galvanized For leveling uprights installed on uneven floors 01x load capacity sign With details of bay and shelf load capacities, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any transport or shipping beyond this will incur additional costs, which can be requested from us depending on the delivery location and scope of delivery.

Būklė: geras (naudotas), laisvas tarpatramis: 3 600 mm, bendras ilgis: 18 510 mm, lentynos aukštis: 1 750 mm, Technical Data for Pallet Racking System: Racking System: Stow Type: Pal Rack NS Gisdpsw I Tfnofx Ap Ieu Setup Information: Number of Rack Rows: 01 unit Length per Rack Row: approx. 18,510 mm Number of Bays per Rack Row: 05 units of 3,600 mm each Number of Levels (plus floor level): 02 units Volume Information: Pallet positions per bay: 12 units Pallet positions per rack row: 60 units Total pallet positions: 60 units Based on: Load carrier: Euro Pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum pallet weight: 389.50 kg Scope of Delivery: 06x Pallet rack frames, used Colour: RAL 5015 sky blue Frame type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal braces, base plates The frames are pre-assembled (bolted truss) Height: 1,750 mm Depth: 1,100 mm 20x Pallet rack beams, used Colour: orange Beam type: PNB0472 Box profile: 120 x 50 mm Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,500 kg, with uniformly distributed load 40x Safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x Wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shim plates, used Material: fully galvanized For levelling rack frames on uneven floors 01x Load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or dispatch requires extra cost, which can be requested from us separately depending on delivery location and scope.

Būklė: geras (naudotas), lentyna ilgis: 3 960 mm, lentynos aukštis: 2 278 mm, Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for the installation: Number of shelving rows: 01 unit Length of shelving: approx. 3,960 mm Number of bays per shelving row: 03 units, each 1,280 mm Number of levels incl. bottom level: 06 units Scope of delivery includes: 04x Upright frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. cross struts and base plates The frames are pre-assembled 2,278 mm high 800 mm deep 18x Shelves, used Giodpfxow H Rb Ej Ap Iju Material finish: Sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight | per unit: approx. 11.68 kg 01x Cross brace, used Designation: KV31313 Material finish: Sendzimir galvanized 01x Load capacity sign with details of bay and shelf loads, manufacturer and order number Dimensions: 297 x 210 x 2 mm General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply. These can be requested from us separately, depending on the place of delivery or the scope of delivery.

Būklė: geras (naudotas), lentyna ilgis: 1 340 mm, lentynos aukštis: 2 278 mm, Technical Data for the Shelving Rack: Racking System: SSI Schäfer Gijdpfx Asw H Rl Rep Ieu Type: R 3000 Technical Data for Setup: Number of Rack Rows: 01 unit Rack Length: approx. 1,340 mm Number of Bays per Rack Row: 01 unit at 1,280 mm each Number of Levels incl. Ground Level: 06 units Scope of Delivery Includes: 02x Upright Frames, new Material finish: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including diagonal braces and base plates Uprights are pre-assembled Height: 2,278 mm Depth: 800 mm 06x Shelves, used Material finish: sendzimir galvanized Dimensions: 1,280 x 775 x 40 mm Weight | per unit: approx. 11.68 kg 01x Cross Brace, used Designation: KV31313 Material finish: sendzimir galvanized 01x Load Capacity Sign Shows bay and shelf load limits, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm General Information about the Item: This item is offered for collection only. Any transportation or shipping requested in addition may incur additional costs, which can be checked with us separately depending on the delivery location and scope.

Būklė: naudotas, Gamybos metai: 2014, veikimo valandos: 11 517 h, Colour: Grey Unladen weight: 6,000 kg - Year of manufacture: 2014 - Documentation available: No - CE certificate available: No - Serial number: 070614/B/1-407 - Operating hours: 11,517 - Number of milling spindles [pcs]: 1 Gijdpfx Ajx E Uk Uop Iou - Milling spindle 1: - Number of controlled axes [pcs]: 4 - C-axis available: Yes - Type of milling table: Flat table - Drilling tools available: Yes - Horizontal drilling spindles [pcs]: 6 - Vertical drilling spindles [pcs]: 18 - Tool changer positions [pcs]: 12 - System/software: TWINCAT - Safety features: Safety fence, safety mat - Vacuum pump available: Yes - Number [pcs]: 2 - Make: Becker - Year of manufacture: 2023 - Main motor output [kW]: 18.5 - Capacity [m³/h]: 600 - Vacuum [mbar]: 250 - CNC documentation available: USB stick - Working area X [mm]: 7,220 - Working area Y [mm]: 1,580 - Z-axis working area [mm]: 180 - Transport weight [kg]: 6,000 kg Financial Information VAT: The quoted price is subject to VAT VAT/Value Added Tax: VAT deductible for business customers Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: labai geros būklės (naudotas), 7,5 m Stow Pal Rack padėklų stelažas Itin tvirta, pramoninė padėklų stelažų sistema iš aukščiausios kokybės gamintojo Stow, skirta saugiam ir normativais atitinkančiam sunkių europadėklų sandėliavimui. Gamintojas: Stow Tipas: Pal Rack System Stelažo ilgis: apie 7500 mm Stovo aukštis: apie 4500 mm Stovo gylis: apie 1100 mm Stovo tipas: PLFB 16P (tvirta, standi profilio konstrukcija) Laisvas tarpas tarp stovų: 3.600 mm (optimizuota tiksliai 4 europadėklams šalia) Tarpų skaičius: 2 Sandėliavimo lygių skaičius: 4 lygiai kiekviename tarpe (grindų vieta + 3 traversų lygiai) Traveros tipas: PNB 0436 (3.600 mm ilgio) Maks. padėklo svoris: 1.000 kg (tolygiai paskirstyta) Leistina lentynos apkrova: 4.000 kg vienai traversų porai Leistina tarpo apkrova: 20.000 kg Stovo paviršius: mėlyna danga (RAL 5015) Sandėliavimo talpa: 16 europadėklų viename tarpe / 32 europadėklai iš viso Saugumo pagrįstumas: Maksimaliai pakrovus visas 3 traversų vietas, faktinė tarpo apkrova sudaro 12.000 kg. Taip eksploatuojant įrenginys veikia visiškai saugiai, žymiai nepasiekdamas statinės ribos (20.000 kg). Komplektacija: 3 x stovas 4500 x 1100 mm, tarpo apkrova 20.000 kg, mėlynas 12 x travera 3.600 mm su saugumo kaiščiais, lentynos apkrova 4.000 kg, oranžinė Giedpfxszc Nilj Ap Iou Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos – teirautis atskirai!

Būklė: labai geros būklės (naudotas), 11,2 m Stow Pal Rack paletinė lentyna Ypač tvirta, pramoninė paletinių lentynų sistema iš aukščiausios klasės gamintojo Stow, sukurta sunkias Europos padėklų saugiam ir standarto reikalavimus atitinkančiam sandėliavimui. Gamintojas: Stow Tipas: Pal Rack sistema Lentynos ilgis: apie 11 200 mm Stovo aukštis: apie 5 000 mm Stovo gylis: apie 1 100 mm Stovo tipas: PLFB 16P (tvirta, atspari deformacijoms profilio konstrukcija) Atvira sekcija: 3 600 mm (optimizuota tiksliai 4 Euro padėklams šalia vienas kito) Sekcijų skaičius: 3 Sandėliavimo aukštų skaičius: 4 aukštai kiekvienoje sekcijoje (grindų vieta + 3 skersinių aukštai) Skersinio tipas: PNB 0436 (3 600 mm ilgio) Didžiausias padėklo svoris: 1 000 kg (tolygiai paskirstytas) Leistina lentynos apkrova: 4 000 kg kiekvienai skersinių porai Leistina sekcijos apkrova: 20 000 kg Stovo paviršius: mėlyna dažyta (RAL 5015) Sandėliavimo talpa: 16 Europadėklų kiekvienai sekcijai / 48 Europadėklai viso Saugumo pagrįstumas: Maksimaliai užpildžius 3 skersines aukštus tikroji sekcijos apkrova yra 12 000 kg. Sistema yra visiškai saugi, nes statinė maksimali apkrova siekia 20 000 kg. Gjdpjzc Nfgjfx Ap Ioiu Pristatymo apimtis: 4 x stovas 5 000 x 1 100 mm, sekcijos apkrova 20 000 kg, mėlyna spalva 18 x skersinis 3 600 mm, įskaitant apsauginius kaiščius, lentynos apkrova 4 000 kg, oranžinė spalva Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina – pagal užklausą!

Būklė: naudotas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: LC592, Technical Specifications & Performance Data This complete CSD can filling line is a used filling system, configured for aluminium cans and designed for reliable beverage production. Manufactured by ZhongChen, the line is engineered to deliver consistent quality for carbonated soft drinks (CSD) at an industrial packaging scale. It features a comprehensive equipment package from mixing station through to downstream packaging, enabling smooth, continuous operation. Production speed: 18,000 bph Container type: Aluminium cans Available volume range: 0.33 L Product: CSD (carbonated soft drinks) Year of manufacture: 2018 (main machines) Giodpjydc Ttjfx Ap Iju Main equipment: Mixer, filler, can seamer, can rinser, can warmer, shrink wrapper, depalletizer, conveyor system, COP system Manufacturer: ZhongChen Advanced Automation & Control Systems The line is arranged for synchronized operation across the primary processing and packaging stages. A centralized control concept ensures coordinated start/stop, accumulation management, and error handling, securing a stable throughput at rated output. Operator interfaces are designed for straightforward format changes and routine tasks. Safety interlocks and protective devices support safe operation while maintaining efficient maintenance access. Production Line Integration Capabilities This production line is configured for inline operation, from primary product mixing through filling, seaming, rinsing, to secondary packaging. Conveyor systems enable smooth transitions and buffering between machines for optimal flow. The 0.33 L can format is supported throughout the line, with provisions for standard format change procedures. The layout is compatible with typical upstream syrup preparation and downstream palletizing solutions, forming a complete beverage production and industrial packaging system. Machine Condition & Maintenance History The line is stated to still be in production, indicating it is installed and operational at the time of documentation. The 2018 year of construction for the key machines suggests modern design and up-to-date safety features. Routine maintenance and serviceability are facilitated by easily accessible areas and standardized components common in ZhongChen packaging systems. Operating hours are not specified. Operational Performance & Versatility Optimized for CSD processing, this used filling line supports consistent carbonation retention and gentle product handling during filling and seaming. The can rinser and can warmer modules contribute to maintaining product quality and the integrity of subsequent packaging, while the shrink wrapper produces stable packs for palletizing. Quality is ensured through stable handling and synchronized transfers, minimizing scuffing and deformation during the production process.

Būklė: labai geros būklės (naudotas), 11,2 m Stow Pal Rack padėklų stelažas Ypač tvirta, pramoninė padėklų stelažų sistema iš aukščiausios klasės gamintojo Stow, sukurta sunkias europadėklio saugiam ir standartus atitinkančiam sandėliavimui. Gamintojas: Stow Tipas: Pal Rack sistema Stelažo ilgis: apie 11 200 mm Statramsčių aukštis: apie 4 250 mm Statramsčių gylis: apie 1 100 mm Statramsčio tipas: PLFB 16P (tvirta, atspari deformacijoms profilio konstrukcija) Šviesus tarpatramio plotis: 3 600 mm (optimizuota tiksliai 4 europadėkliams greta) Tarpatramių skaičius: 3 Sandėliavimo lygių skaičius: 4 lygiai kiekvienam tarpatramiui (vietų ant grindų + 3 sijos) Sijos tipas: PNB 0436 (3 600 mm ilgio) Maksimalus padėklo svoris: 1 000 kg (tolygiai paskirstyta) Leistina sekcijos apkrova: 4 000 kg kiekvienai sijų porai Leistina tarpatramio apkrova: 20 000 kg Statramsčių paviršius: mėlynai dažytas (RAL 5015) Godpfozcw U Ajx Ap Isiu Sandėliavimo talpa: 12 europadėklių kiekviename tarpatramyje / 36 europadėkliai bendra talpa Saugumo patikimumas: Maksimaliai užpildžiusi 3 sijų lygius, faktinė tarpatramio apkrova yra 12 000 kg. Taigi sandėliavimo sistema veikia žymiai žemiau už leistiną statinę apkrovą (20 000 kg). Komplektacija: 4 x statramsčiai 4 250 x 1 100 mm, tarpatramio apkrova 20 000 kg, mėlyni 18 x sijos 3 600 mm (su tvirtinimo kaiščiais), sekcijos apkrova 4 000 kg, oranžinės Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinės siuntimo išlaidos – pagal užklausą!

Būklė: naudotas, Gamybos metai: 2014, Overview This capsule applicator was manufactured in 2014 by CIRIO GERMANO. The machine features 6 heads and is designed for processing thermal shrink capsules. Technical Details Manufacturer: CIRIO GERMANO Model: MONOBLOCCO 6 TERMICHE Year of manufacture: 2014 Number of heads: 6 Gedpfxjv Tp E Rs Ap Ieiu Capsule type: PVC shrink capsules Function: Automatic capsule feeding & thermal shrinking

Būklė: naudotas, Gamybos metai: 2015, Overview The Kosme / Krones Barifill is an isobaric filler, currently in operation at a German brewery, where it can be seen running. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour, with the manufacturer-rated nominal speed at 7,000 bottles/hour. The system is designed for 26-mm crown caps and features 30 filling stations. Technical Data - Output: 8,000 bottles/hour (for 0.33-liter bottles) - Closure type: 26-mm crown caps - Formats: - 0.5 NRW - 0.5 Longneck - 0.5 Lochmund - 0.33 ALE - 0.33 SUD - 0.33 Steinie clamp - Number of filling heads: 30 - Electrical specifications: - Max. voltage: 3x400 V + N + GND 50 Hz - Power consumption: 13.00 kW - Operating hours: 18,393 (as of March 2025) Included spare parts: - Drives - Gearboxes - Cardan shaft - Other parts Annually serviced by Kosme/Krones - Lifting cylinders replaced in 2024 - Valves and cappers serviced in 2025 Features: - Bottle shower - High-pressure injection for foaming - Bottle stopper Gedpfov Ic Uzex Ap Ieiu - Table rinser - Crown cap hopper

Būklė: naudotas, Gamybos metai: 2015, Overview The labelling machine was manufactured in 2015 by the German company Krones. It is still operational and is currently located at a German mineral water company. The previous owner has invested in a new machine, which is why this unit is now for sale. The machine is equipped with gripper feeds, enabling the processing of multiple formats and ensuring minimal changeover times. Additionally, it features automatic label magazines to further reduce downtime. Technical Data Capacity: up to 50,000 bph Design type: Rotary Working direction: counterclockwise (r-l) Modular machine Conveyor height: 1150 mm Label type: cold glue Label positions: front/neck foil, body, back, seal Bottle formats: - 0.25l Vichy bottle - 0.5l GDB - 0.7l GDB - 0.75l gastronomy bottle Number of labelling stations: 3 Pitch circle diameter: 1800 mm Number of bottle plates: 45 Giedpev I Tnxefx Ap Iou Plate pitch diameter: 125.6 mm Bottle plate orientation via Danfoss servo drives Detection of damaged or fallen bottles at infeed Infeed stopper starwheel Glue rollers made of steel Prepared for bottle alignment using camera inspection Hotmelt unit for seal label by Robatech Hotmelt nozzle mounted at the labelling station Siemens S7 Technical documentation available Scope of Delivery - Date coder - Glue pumps Unipump H (with heating control)

Būklė: naudotas, Gamybos metai: 2002, Overview  This isobaric beer filler was manufactured in 2002 by the German company KHS. The machine is designed for 500 ml glass bottles with crown caps and achieves an output of 44,000 bottles per hour. It has been used for bottling beer at a temperature of 10-12°C. The machine will be available from November 2025 and will remain installed until then. An on-site inspection can be arranged on request. Technical specifications  Output: 44,000 bottles per hour (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: isobaric (mechanical filling system) Number of filling stations: 144 Capper: 24 stations (crown cap) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: climate-controlled, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Rotation direction: left to right Scope of delivery  Filler: KHS Innofill DMG SVF 144-KK24 Crown capper with 24 stations Control cabinet and operator panel Bottle neck guides CIP cups High-pressure injection (HDE) Bottle rinser at outfeed Shed-type bottle table Central lubrication system VPN remote access capability Safety enclosure (updated in 2016, with rinsing system) Control panel Closure feeder by NSM Fill level inspection system: Krones Checkmat (2015) Godpfowif Dgox Ap Isiu