Koepfer Horizontalios Krumpliaračių Frezavimo Staklės pirkti naudotą (49 495)

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Gbodpfx Alet Hw D Re Iep Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Būklė: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories. Gbedpfx Alst Hwxbe Isp

Būklė: geras (naudotas), Modulis – maks. 2 Frezavimo ilgis – 135 mm Bendroji galios sąnauda – 2,2 kW Mašinos svoris – apie 1420 kg Reikiamas plotas – apie 2,00 x 1,60 x 1,43 m --> Techniniai duomenys: didžiausias frezavimo skersmuo: Ø 150 mm --> didžiausias frezavimo ilgis: 135 mm --> didžiausias modulis: 2 --> veleno skersmuo: Ø 24 mm --> veleno tvirtinimas: MK-4 --> frezos sukimosi greitis: 140–1120 aps./min. --> automatinis padavimas Įranga ir priedai: Aušinimo skysčio sistema, frezos, keičiami ratai, naudojimo instrukcija. Gbjdpfjzkvuvex Al Iop

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160 mm Wheel width 355 mm Module - max. 4.5 Module - min. 0.5 Centre distance 450 mm Total power requirement 11 kW Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter - max. 160/175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Gsdpsvz Ec Iefx Al Iebp Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Būklė: labai geros būklės (naudotas), Ratų skersmuo - maks. 130 mm Ratų plotis 180 mm Modulis - maks. 2,5 Modulis - min. 0,3 Sukimosi greitis 140 – 900 aps./min Dantų skaičius - min. 4 Tvirtinimo ilgis maks. 200 mm Valdymas Siemens Rušinio skersmuo - maks. 80 mm Bendra galingumo poreikis 3,5 kW Staklių svoris apie 2,9 t Užimamas plotas apie 1,8 x 1,6 x 1,9 m Gbodpsy Umizofx Al Iep

Būklė: geras (naudotas), Ratų skersmuo - maks. 145 mm Ratų plotis 110 mm Modulis - maks. 2 Gbodpsy Ivdhjfx Al Isp Modulis - min. 0,3 Sūkių skaičius 112 - 1000 aps./min. Mažiausias dantų skaičius 6 Maksimali spaudimo ilgis 150 mm Bendras reikiamas galingumas 3,5 kW Staklių svoris apie 1,3 t Reikalinga vieta apie 1,3 x 0,8 x 1,4 m

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation Gbedovzhf Sspfx Al Iop

Būklė: geras (naudotas), Gamybos metai: 1991, Machine weight approx. 6 t The base machine design is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head Gbodpfx Aoub Amfjl Isp - Workpiece clamping is between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the machine base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angular adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled - IBH control system - Loading device - Extensive accessories Technical specifications: - Maximum module for gear hobbing with hobs according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Maximum workpiece diameter with manual loading: 200 mm - Maximum workpiece diameter with automatic loading: 150 mm - Maximum workpiece length: 400 mm - Maximum / minimum cutter diameter: 102/40 mm - Maximum cutter length: 230 mm - Maximum / minimum cutter arbor diameter (standard): 32/16 mm - Axial slide travel = maximum milling length, Z-axis: 300 mm - Radial slide travel, X-axis: 140 mm - Cutter traverse (shift travel) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swivel angle shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm - Y-axis (milling spindle face): 50 - 230 mm - W-axis (tailstock spindle face): 165 - 585 mm - Cutter speed range, standard B-axis: 0 - 1500 rpm - Workpiece speed, C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (portal loader): 80,000 mm/min

Būklė: naudotas, Gamybos metai: 2001, Techninės detalės: Didžiausias ratlankio diametras: 80/120 mm Maksimalus modulis: 2,5 Didžiausias leistinas galvos apskritimo diametras: 65 mm Mažiausias leistinas frezos koto diametras: 22 mm Didžiausias danties ilgis: 140 mm Didžiausias ilgis: 120 mm Kėliklio eiga ašyje (Z ašis): 320/400 mm Matmenys (ilgis/plotis/aukštis): 3270 x 3240 x 2020 mm Staklių svoris apie: 6 t P60 – Kompaktiškas universalas ratams, velenams ir sraigtams P60 yra mažiausia Gleason horizontalioje nužiebimo staklių serijoje. Šis universalas dantuoja ne tik cilindrinius ratus su visais išvyniojamais profiliais, bet ir yra optimali išeitis vairo dantratukams ir sraigtams apdirbti. Gbedpfx Alexrwpke Iop Su automatine pakrovimo sistema, ištraukimo įranga, drožlių transporteriu, balansavimo įrenginiu su 2 atraminiais centratoriais, procesų stebėsenos sistema Artec, tipas CTM-BT1.1.

Būklė: labai geros būklės (naudotas), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, fully complete and operational—ready for use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1800 rpm • Power supply: 3x380 V / 50 Hz • Power output: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, protection: 25 A • Mechanical and automatic feeds on the axes ✔ Equipment: • Heavy-duty machine vise mounted on the table • Work lighting • Cooling system • Full control panel with setting wheels and feed levers ✔ Advantages: Godpfew Uab Njx Al Iebp • Very stable, heavy-weight design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer—Heckert (GDR), known for indestructible machinery • Fully operational and complete – ready for immediate use • 1000 mm table – enables machining of larger workpieces Reliable machine, not a lightweight Chinese build—this is a classic from an era when equipment was built to last.

Būklė: naudotas, Techninės detalės: z eiga: 1250 mm Apsisukimo skersmuo virš staklių lovos: 260 mm Ruoinio skersmuo virš lovos: 500 mm Ruoinio skersmuo virš atramos: 250 mm Gbodpjv U Un Hefx Al Isp Centų aukštis virš lovos: 260 mm Frezavimo ilgis: 2000 mm Didžiausias modulis: 8 / 12 Bendras galios poreikis: 9,5 kW Apytikslis staklių svoris: 3,8 t

Gamybos metai: 1983, būklė: geras (naudotas), FGSV 32 TOS KURIM milling machine. Year of manufacture: 1983 (Czech Republic). Specifications: Table: 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Spindle speed range: 35-1800 rpm. Distance between spindle and table: 140 - 590 mm. Distance between spindle and column: 120 - 520 mm. Max. table load: 500 kg. Main motor power: 11 kW. Power requirement: 15 kW. Gjdpfx Ajh Ir Rmjl Iobp Dimensions (L x W x H): 2735 x 2425 x 2475 mm. Weight: 4200 kg.

Būklė: naudotas, Gamybos metai: 1977, Wheel diameter - max. 400 mm Wheel width 280 mm Module - max. 4 Module - min. 1 Total connected load 15 kW Machine weight approx. 6000 kg Space requirement approx. ... m LORENZ Universal Gear Hobbing Machine Gbsdpfx Alet Hw Hxe Isp Type F 400 Year of manufacture 1977 S/N 8687 _____ Min./max. wheel diameter 400 mm Module range 1 - 4 Number of teeth approx. 8 – 210 Milling width approx. 280 mm Max. workpiece installation length approx. 450 mm Milling slide swiveling up to 60° Cutter size (diameter x length) 160 x 220 mm Cutter shifting max. 180 mm Cutter speeds 125-500 rpm Table diameter x bore 375 x 80 mm Feed range: axial 0.31 - 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Milling spindle drive approx. 8 kW Total drive power approx. max. 15 kW - 380 V - 50 Hz Weight approx. 6,000 kg Accessories / Special features • Multiple milling programs selectable for climb and conventional milling, as well as for radial/axial milling processes, possibly worm gear milling • Universal milling head with cutter shifting • Hydraulic workpiece clamping on table and hydraulic tailstock • Hydraulically folding counter-holder connection for easier loading • Differential for helical gearing • Infinitely variable speed control, display for speed and amperage • Change gears, various accessories, coolant system * Very robust construction Condition: good – will be demonstrated shortly Delivery: ex stock – as inspected Payment: upon receipt of invoice, strictly net

Būklė: naudotas, Gamybos metai: 1995, Wheel diameter - max. 80 mm Wheel width 120 mm Module - max. 3 Module - min. 1 Control: SIEMENS 840 C Total power requirement: 30 kW Machine weight approx. 7,500 kg Footprint approx. [space missing] m LIEBHERR CNC-controlled gear hobbing machine Type: LC 82 Year of manufacture: 1995 # 0836 --- Wheel diameter max. 80 mm Module 1 – 3 Helix angle +/- 45° Distance table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shift range/tool traverse: 180 mm Min. number of teeth: 3 Cutter Ø x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feeds in axial/radial/tangential: 20/4/5 mm/rev Gedpfx Aljt Hw R Do Iobp Max. workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW - 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special equipment: • SIEMENS CNC control type 840 C for 6 axes (i.e. cutter drive/Table drive/Swivel angle of the milling head/axial feed/radial feed/tangential feed) with gear-specific user interface and diagnostic functions for rapid troubleshooting. • With device for automatic insertion of the hob into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading unit SSL = quick swivel loader using a mechanical step transmission and cam disk for fast loading times, with 3-way rotary gripper for blank gripping/working position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinions) • Workpiece feeding by means of plate chain conveyor (PKB) for workpieces with positive-fit carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete working area enclosure with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact design! Delivery: ex-stock – as inspected Payment: net cash – on receipt of invoice

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1970, Krumplysavimo staklės ZFWZ 6300x40 Gamintojas: WMW-MODUL Modelis: ZFWZ 6300x40/1 Pagaminimo metai: 1970 Didžiausias ratų skersmuo: 7100 mm Krumplių plotis: 1500 mm Didžiausias modulis: 45 Gbedpfx Aoxln Iwel Iep Stalo skersmuo: 5300 mm Frezuotuvo skersmuo x plotis: 400x500 mm Didžiausias spiralinio kampas: 45 laipsniai Frezuotuvo skersmuo: 500 mm Frezuotuvo apsukos: 9-63 aps./min. Bendras galios poreikis: 47 kW Staklių svoris: 160 t Komplektuojama su standartine frezavimo galva, tangentiniu krumpliaračiu, vidaus frezavimo galva, keičiamais krumpliaračiais, atramomis. Galimas vaizdo įrašas.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, Iš karto laisva iš mokymo centro: Universalioji frezavimo staklė Horizontalio-Vertikali WMW Auerbach Tipas: FW 250 x 1000 / 2 Pagaminimo metai: 1989 Stalas: 1250 x 250 mm Stalo apkrova: 1250 kg Eigos X/Y/Z: 700 / 400 / 500 mm Heidenhain trijų ašių skaitmeninis indikatorius SK 40 Veleno apsukos: 55 – 2800 aps./min Padavimai: 10 – 630 mm/min, be pakopų Vertikalioji galva Gsdpezg Ti Nsfx Al Ijbp Horizontaliojo frezavimo įranga Galia: 6,3 kW Svoris: 2,5 t Kaina: 2.000 Eur—be PVM, atsiėmimas iš vietos

Būklė: naudotas, Gamybos metai: 1988, x eiga 1800 mm y eiga 700 mm z eiga 1200 mm SK50 galva: taip Galvos: 2 Valdymas: Heidenhain 155 Stalas: 700–2000 mm Dokumentacija: taip Gedpfx Alszf Nuxo Isbp Išmontuota: taip Mašinos svoris apie 12,5 t 5 pakuotės

Būklė: naudotas, Technical details: X travel: 1000 mm Y travel: 350 mm Z travel: 400 mm Distance from column to table edge: min. 150 / max. 550 mm Spindle speed range: 28 - 1400 rpm / 18 steps Tool holder: SK40 Gbsdpfx Aev Sz Diel Isp Spindle head swivels left/right: 90° and forwards/backwards: 45° Feed rate (X/Y axis): 16 - 800 mm/min / 18 steps Table size: 1600 x 400 mm Clamping surface: 1400 x 330 mm Total power requirement: 14.5 kW Approx. weight: 4000 kg Machine dimensions (LxWxH): approx. 2.0 x 2.4 x 1.85 m Horizontal milling machine, retrofitted with vertical milling head

Būklė: naudotas, Technical details: X-axis travel: 450 mm Y-axis travel: 150 mm Z-axis travel: 400 mm Distance from column to table edge, min./max.: 100 / 250 mm Spindle speed range: 25, 44, 78, 130, 228, 400 / 6 steps rpm Feed rate X/Y: 10 - 100 / 8 steps mm/min Table size: 990 x 300 mm Clamping surface: 800 x 195 mm Table swivel +/-: 30° Connected load: not specified kW Weight approx.: 1,200 kg Machine dimensions (LxWxH): approx. 1.5 x 1.3 x 1.5 m Gjdpou Nc Nlefx Al Isbp Horizontal milling machine, currently fitted with a 32 mm tool arbor and a gear cutter. Machine vice included.

Būklė: naudotas, Techninės detalės: Smailumo aukštis virš staklių: 260 mm Ruonio diametras virš staklių: 500 mm Ruonio diametras virš atramos: 250 mm Frezavimo ilgis: 2000 mm Dantų skaičius: 2 - 50 Pasislinkimas: 0,023 - 5,17 mm/min Maksimalus modulis: 8 / 12 Veleno skylės diametras: 102 mm Ruonio sukimosi greitis: 18 - 224 aps./min Centro įvorės eiga: 100 mm Bendras energijos poreikis: 9,5 kW Apytikslis staklių svoris: 5,2 t Staklių matmenys (IxPxA): 3,6 x 2,1 x 2,0 m Papildoma techninė informacija: Ridinėjimo poslinkis: 0,023 - 5,17 mm/VR Išilginis frezavimas - mm/min. Gbsdov U T Dyopfx Al Iep

Būklė: naudotas, Gamybos metai: 2000, Ideal machine for the production of rolling pins, turned round chair legs, and similar items. Gbodpfx Alermxr As Isp

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC kūginių krumpliaračių frezavimo staklės su lanko dantavimu Gleason Nr. 631 Gbedew Tfb Sepfx Al Isp Pagaminimo metai: 2011 Valdymas: SIEMENS 840d Modernizuota 2011/2012 m. su nauja valdymo sistema, pavaromis ir kt. Staklės buvo pilnai kapitaliai suremontuotos 2011 m. Įdiegta nauja valdymo sistema ir pavaros.

Būklė: naudotas, Gamybos metai: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Gsdpfx Aljxc E H Se Ijbp Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feed/automation Available from 24.08.2024

Būklė: geras (naudotas), Machine number: 2082 Type / Model: F315 Control: conventional Travel paths x-y-z: 820 x 300 x 440 mm Table: 1250 x 335 mm Table clamping surface: 1100 x 225 mm Speed range: 56 to 2800 rpm Spindle taper: SK 40 Feed rate: 10 to 630 mm/min Rapid traverse: Connected load: 6 kW Accessories/Equipment: Condition: good Weight: 2 t Dimensions: 1700 x 2000 x 1900 mm Godpfoh Rawfex Al Iobp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Ratų skersmuo - maks. 130 / 80 mm Ratų plotis 180 mm Modulis - maks. 4 Modulis - min. 0,5 Gjdpfx Ajxlug Hol Ijbp Veleno apsukos - bepakopės 300 - 3000 aps./min Valdymas Siemens 840 D x eiga 200 mm y eiga 170 mm z eiga 250 mm Frezuotojo galva - pasukama + / - 45° Stalo skersmuo 168 mm Stalo skylė 65 mm Maksimali tvirtinimo ilgis 245 mm Stalo apsukų diapazonas 0 - 1000 aps./min Bendra galingumo poreikis 51 kW Staklių svoris apie 9,2 t Užimama vieta apie 4,5 x 4,0 x 3,2 m