Compactsystem Martina 30 pirkti naudotą (25 056)

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar Kodpfsvz Hqtsx Aaujdk - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution. Kdodpfx Aevz Hqmoauok

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Kdjdpjvz Hq Tsfx Aaujk Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 Kdedpsvz Hq Hsfx Aauek The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW Kdjdsvz Hqyspfx Aauek - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. Kodevz Hqgopfx Aauodk A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. Kdedpfx Asvz Hhxoauok The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Būklė: naudotas, Gamybos metai: 1992, Perfect binding line Müller Martini Year of manufacture: 1992 Consisting of: Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Manual feed station - Number of gathering stations: 18 - Pump(s) - Setup element - Criss Cross delivery - Book block feeder: 3606 - Transfer to binder Perfect binder Müller Martini 3006 /30 Z Hour counter: approx. 14,700 Description: - Number of clamps: 30 - Main milling station - Roughening station Kedpfxjvgt Dks Aaujdk - Exclusive dust extraction, machine was connected to central dust extraction system - Drive station for spine gluing unit - Cold glue spine gluing unit, interchangeable - Intermediate drying station (infrared): IRT - Drive station for second spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: Probag - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Gauze station - Stream cover feeder - Creasing station - Pump(s) - 1st pressing station - HF high-frequency dryer - 2nd pressing station - Delivery device (to the left) Conveyor section Müller Martini

Būklė: naudotas, Gamybos metai: 1992, Perfect Binding Line Müller Martini Year of manufacture: 1992 Including: Book Block Feeder ITM Gathering Machine Müller Martini 210-E Description: - Manual feeding station - Number of gathering stations: 18 - Pump(s) - Make-ready element - Criss cross delivery - Book block feeder: 3606 - Transfer to binding unit Perfect Binder Müller Martini 3006 /30 Z Hour counter: approx. 14,700 Description: - Number of clamps: 30 - Main milling station - Roughening station Kdodpfx Aasx Dkkleusk - Exclusive dust extraction, machine was connected to a central dust extraction system - Drive station for spine gluing unit - Cold glue spine gluing unit, interchangeable - Intermediate drying station (infrared): IRT - Drive station for 2nd spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: Probag - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Gauze station - Cover feeder - Scoring station - Pump(s) - 1st pressing station - HF high frequency dryer - 2nd pressing station - Delivery device (to the left) Conveyor Line Müller Martini Three-Knife Trimmer Kolbus HD 150.B Year of manufacture: 2005 Description: - Infeed from the right - Automatic magazine for inline production - Cut counter - Interchangeable cutting cassettes (standard set) - Knife presetting device - Set(s) of knife holders: 2 - Total knife sets: 2

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7026 TECHNINĖS SPECIFIKACIJOS - įleidimo plotis: 740 mm - įleidimo aukštis: 300 mm - veleno plotis: 780 mm - veleno skersmuo: 1000 mm - peilio ilgis: 780 mm - peilių skaičius: 2 vnt - sietos matmenys: 55x55 mm - apačioje: 4 dantyti traukimo velenai - apatinio veleno variklis: 5,5 kW - viršuje: 3 dantyti traukimo velenai - viršutinio veleno variklis: 5,5 kW - tiekiamas konvejerinis juostas - tiekiamos juostos ilgis: 4300 mm - tiekiamos juostos plotis: 600 mm Kodpfx Aajyk Hfajuodk - juostos pavara variklis: 2,2 kW - pagrindinis variklis: 90 kW - atbulinė eiga - automatinis atbulinis režimas (autoreversas) - bendri įrenginio matmenys (ilgis/plotis/aukštis): 4600x2350x1700 mm - bendri padavimo įrenginio matmenys (ilgis/plotis/aukštis): 4550x980x970 mm - bendras svoris: apie 11000 kg – vokiška gamyba, - automatinis atbulinis režimas (su reguliavimu) – naudotas smulkintuvas, labai gera būklė Grynoji kaina: 265900 PLN Grynoji kaina: 63300 EUR Grynoji kaina apskaičiuota pagal kursą 4,2 PLN/EUR (kursui reikšmingai svyruojant, kaina gali keistis)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7374 TECHNINIAI DUOMENYS - Viršutinės įkrovimo piltuvo matmenys (ilgis/plotis): 840x620 mm - Apatinės įkrovimo piltuvo matmenys (ilgis/plotis): 300x300 mm - Rotoriaus plotis: 340 mm - Variklis: 22 kW - Sietas: 15 mm - Peilių kiekis: 6 vnt. - Susmulkintos medienos išleidimo anga: Ø 160 mm - Matmenys (ilgis/plotis/aukštis): 1400x800x2000 mm - Svoris: 840 kg Kedpfx Ajy At Nqsaujdk PRIVALUMAI – Pagamintas Vokietijoje – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 23 900 PLN Grynoji kaina: 5 690 EUR (priklausomai nuo 4,2 EUR kurso) (Kainos gali keistis svyruojant valiutų kursui)

Būklė: labai geros būklės (naudotas), Katalogo numeris 6726 TECHNINIAI DUOMENYS - Pakrovimo bunkerio įvadas: 280x300 mm - Susmulkintos medienos išvadas: Ø 310 mm - Rotoriaus darbinis plotis: 340 mm - Pagrindinis variklis: 22 kW - Peilių kiekis: 6 vnt. - Matmenys (I/P/A): 1300x1150x1680 mm - Svoris: 720 kg Kdsdpjignt Uofx Aausk PRIVALUMAI – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 19 900 PLN Grynoji kaina: 4 740 EUR Kaina apskaičiuota pagal 4,2 PLN/EUR kursą (esant didesniems kursų svyravimams kaina gali keistis)

Būklė: geras (naudotas), Bandall BA 24/15-30 juostavimo mašina Viena iš žinomiausių juostavimo mašinų pasaulyje, rinkos lyderė. Pagaminta Bandall, Nyderlandai. Mašina labai geros būklės, neseniai aptarnauta. Pagaminimo metai: 2016 Mašina gali dirbti rankiniu arba automatiniu režimu. Gamybinė versija, skirta sunkioms apkrovoms. Mašina sumontuota ant atskiro rėmo su ratukais transportavimui. Dirba su jumbo ritiniais. Įdėjus medžiagą, mašina ją apvynioja juosta, suspaudžia ir užsandarina, sukurdama elegantišką pakuotę. Kdjdpfxjyurzno Aaujk Idealiai tinka vizitinėms kortelėms, lankstinukams ir kitiems gaminiams apvynioti. Valdoma LCD paneliu. Techninė specifikacija: Juostos plotis: 30 mm Našumas: 36 ciklai/min. Mašinos angos matmenys: 320 × 160 mm Pridedama viena plėvelės ritė.

Būklė: geras (naudotas), Com J240/30 juostavimo mašina ant pagrindo Vienas iš žinomiausių juostavimo mašinų gamintojų rinkoje, pagaminta Japonijoje. Mašina veikia rankiniu arba automatiniu režimu. Gamybinė versija, skirta sunkiems kroviniams. Įrengta ant savarankiškos konstrukcijos su ratukais transportavimui. Naudojamos jumbo ritės. Įdėjus medžiagą, mašina apjuosia ją juosta, suspaudžia ir užsandarina, sukurdama tvarkingą pakuotę. Idealiai tinka vizitinių kortelių, lankstinukų ir kitų medžiagų pakavimui. Techninės specifikacijos: Juostos plotis: 30 mm Našumas: 26 ciklų/min Juostuojamo gaminio matmenys: 240 x 150 mm Pagaminta Japonijoje. Svoris: 70 kg. Kdedpjyrz R Tofx Aaujk

Būklė: geras (naudotas), Filling, capping, and labeling line for PET bottles, designed for non-carbonated liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 piston filler - Adjustable output: up to 3,000 bottles (packages/hour) Kdodpfx Aajwyddyouek - Number of dosing stations: 8 - Number of capping heads: 4 - Bottle capacity: 200 – 1000 ml - Packaging dimensions: ~ Diameter: 50 – 110 mm ~ Height: 150 – 330 mm ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm ~ Width: 1,150 mm ~ Height: 2,300 mm The machine is currently set up for 1,000 ml bottles. Additional format set for 500 ml bottles. A large number of spare parts and seals are also included in the package. 2) Roll-fed hot-melt labeler for film labels - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Output: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Equipped with an automatic hot-melt adhesive application system by NORDSON, a renowned specialist. The machine is set up for labeling 1 L bottles. Adapting to other bottle formats requires replacement of the infeed components. 3) Slat conveyors with a total length of 850 cm. Used machinery, fully functional, regularly serviced. Machine operation video available—recorded prior to dismantling. Photos show the current condition in our warehouse.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Parduodamas profesionalus šveicariškas klijų agregatas Robatech RoBa 30 (Robatech AG CH-5630 Muri). Įrenginys pilnai veikiantis, pilnos komplektacijos ir paruoštas darbui. Puikiai tinka pakavimo linijoms, lankstymo-klijavimo mašinoms, kartoninėms uždarymo mašinoms ir kitiems įrenginiams, kuriems reikalingas tikslus karštų klijų tiekimas. Techniniai duomenys: * Modelis: RoBa 30 * Gamybos metai: 1984 * Našumas: 900 g/min * Maksimalus hidraulinis slėgis: 40 bar * Maksimalus oro slėgis: 5 bar * Didžiausia darbinė temperatūra: 200°C * Maitinimas: 240 V * Srovės suvartojimas: 10 A * Siurblio perdavimo santykis: 1:8 * Aiškiai įskaitoma vardinė lentelė, veikiantis manometras Būklė: * Geros techninės būklės * Pilnas komplektas, nieko netrūksta Ksdjum Hufspfx Aausdk * Šveicariška kokybė – labai patvari konstrukcija

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 120 kg, bendras ilgis: 900 mm, bendras plotis: 1 500 mm, bendras aukštis: 2 050 mm, įėjimo įtampa: 230 V, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, kartojimo tikslumas: 0,01 mm, lazeri tipas: šviesolaidinis lazeris, Įranga: USB jungtis, apšvietimas, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a broad range of marking applications. With its integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, laser technology has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and part numbers can be automatically incremented by the software once previously set. In addition, the software can read data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with a Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side-mounted arms for long workpieces, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic determination of focal distance • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) Kdjdpfx Aoyxccrsausk • Signal lamp for operating status indication • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions approx. 900 x 800 x 1900 mm (LxWxH) • Weight approx. 120 kg

Būklė: geras (naudotas), Gamybos metai: 2005, bendras ilgis: 4 200 mm, bendras plotis: 2 500 mm, bendras aukštis: 1 800 mm, produkto aukštis (maks.): 4 mm, bendras svoris: 7 000 kg, Cutting capacity: 4 mm, cutting length: 3050 mm, throat depth: 350 mm, motor: 18.5 kW, motorized backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions: 420x250x180 cm, approx. 6,500 kg Kdedpfx Astp I S Asausk

Gamybos metai: 2010, būklė: geras (naudotas), Parduodame savo Asys kaupimo (buforo) sistemą. Tipas: FPS 30 B. Metai: 2008. Būklė: gera. Galima naudoti iš karto. Kodpfx Aeyylqzeauodk

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, valdiklio modelis: DNC 80, automatizacijos lygis: vadovas, Jonescheit Hytap 30 su DNC 80 – patikima lankstymo staklės su patikrinta valdymo sistema Parduodama Jonescheit Hytap 30 su DNC 80 valdymu. Tai patikimos ir patikrintos lankstymo staklės, skirtos naudojimui dirbtuvėse ir gamyboje. Staklės puikiai tinka tiksliems lenkimo darbams ir pasižymi tvirta konstrukcija bei paprastu valdymu per DNC-80 valdymo pultą. Tai įdomus sprendimas įmonėms, ieškančioms veikiančių ir iš karto naudojimui paruoštų lankstymo staklių. Žinomi duomenys: Gamintojas / modelis: Jonescheit Hytap 30 Valdymas: DNC 80 Pagaminimo metai: 1995 Versija: rankinė Būklė: naudota, visiškai veikianti Pastabos: Kdedpfjyxakysx Aauok Staklės parduodamos be įrankių. Galima apžiūra ir bandomasis paleidimas vietoje. Būklė: Naudota ir paruošta darbui. Išvada: Patikimos lankstymo staklės vartotojams, ieškantiems patikrintos įrangos su DNC valdymu. Puikiai tinka apžiūrai ir veikimo patikrinimui vietoje.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, oro poreikis: 200 m³/val, bendras plotis: 2 400 mm, bendras aukštis: 2 350 mm, bendras ilgis: 3 500 mm, Kasetinių filtrų įrenginys MBX-6000 su 8 kasetėmis. Skirtas bet kokioms dulkėms filtruoti, pvz., medžio, smėlio ir kt. Efektyvus oro srautas: 6000 m³/h, elektros variklis: 9 kW, 3x400 V, 50 Hz, filtro plotas: 104 m² (8x13 m²), filtro klasė: M, pagal DIN 60335, pneumatinis filtro valymas su 10 min. veikimu po darbo, dulkių talpyklos: 4 vnt., po 30 litrų. Clemco smėliavimo talpykla (naudota), 100 litrų. Sraigtinis kompresorius Renner RSK 1-30, pagamintas 2020 m., 1178 darbo val. Kedpfjx Ai Hpsx Aaujdk

Gamybos metai: 2025, veikimo valandos: 2 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally applicable laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after initial setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. The standard equipment includes a laptop with holder, Windows operating system, and laser software. Optionally, the LAS 28 XL laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber Laser: 30W, 20W or 50 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger optional) Kodpfx Asqfcvisaujdk • Marking software EZCAD in German / English • Signal light for operating status display • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (single-sided, double-sided) • Optional: autofocus system • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with Windows operating system • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Būklė: geras (naudotas), For sale: Special Press 63 Tons. Kedev Uxc Uspfx Aauedk The price listed in the advertisement is the net price; VAT must be added.

Būklė: naudotas, Gamybos metai: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with on-load tap-changer, 19 steps, vector group YNyn0, equipped with conservator, Buchholz relay, air dehumidifier, cooling fans, dial thermometer, year of manufacture 1978. Kedjt Akl Hopfx Aausdk

Būklė: labai geros būklės (naudotas), 30 linear meters of Schäfer R3000 Shelf Rack Ksdpfsd Nf Svsx Aaujdk Used, in mint condition, see photos Height: 2.5 m Depth: 80 cm Load capacity/shelf: 250 kg Bay width: approx. 128 cm Negotiation price: € 6,900 net ex stock Offer includes: - 24 uprights/frames, 2.5 m, galvanized - 144 shelves, 250 kg capacity per shelf, galvanized - 9 cross braces for stabilization 6 levels per bay (additional levels can be supplied at extra cost) Also available with 100 cm bay width! Other configurations available. Heights of 2.5 m or 3.5 m in stock. Goods are in stock. Transport and assembly available on request. Inspection possible at any time by prior arrangement. More information available upon request. Over 5,000 linear meters of pallet racking of various manufacturers constantly in stock. (Specifications, technical data, and prices are subject to change and errors; intermediate sale reserved! See our Terms and Conditions. All prices are net ex stock, VAT not included.) Buying & Selling: We are always looking for and offering a variety of items from various sectors: - Thorough clearances of company premises - Liquidations - Fast - flexible - reliable! We also clear out and/or dispose for insolvency administrators. Contact us with a brief description and we will get back to you promptly. To visit our page, please click on our logo!