Hera Hidraulinis Presas pirkti naudotą (12 314)

Būklė: naudotas, Single-column hydraulic press MAE Type S63SZ SO No. 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table size: 850 x 630 mm Codpfxjdzp Trj Ah Herd Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 V, 50 Hz - Hydraulic draw cushion under the table with holes through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight: approx. 5 tons The machine is operational, but the control cabinet has mechanical damage. During a test run, the machine reached a pressing force of 50 tons, most likely due to a pressure relief valve discharging.

Būklė: naudotas, Single-column hydraulic press with drawing cushion RÖCHER Type REP 100.01 SZ Hydraulic drawing press Machine no. 15,499 Year of manufacture: 2003 Press force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Csdpfxoyupule Ah Hsrd Installation height: 600 mm Table area: 850 x 700 mm with drop-through hole Ø 150 mm Ram area: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec Table height above floor: 910 mm Hydraulic operating pressure max. 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec Press speed up to 23.8 tons (238 kN): 5 to 68 mm/sec Press speed up to 100 tons (1000 kN): 5 to 16 mm/sec Return speed: 50 to 400 mm/sec Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC - Ram stroke and press force programmable via control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion equipped with direct travel measuring system - Drawing cushion can be extended and retracted under the press area, suitable for punching applications using the drop-through hole - Floor-level installation, drawing cushion does not go below ground level - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table area with holes for drawing cushion ram rods - Ram with ejector - Stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and button on control panel - LEUZE light barrier as reach-in protection for safe operation - Front mirror columns at the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool tempering or cooling at the ram - Piece counter in the control system - 306 recorded operating hours - Operating manual, hydraulic diagram and electrical diagram available Space requirement for press L x W x H: 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good, as-new condition

Būklė: naudotas, Hydraulic Synchronizing Press, Die Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Tryout Press, Die Spotting Press Serial No. 21169, Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Side passage between uprights: 650 mm Table size: 1560 x 1010 mm Ram area: 1560 x 1010 mm Ram stroke: 575 mm Drawing cushion stroke: 300 mm Drawing cushion holding force: 63 tons Drawing cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column diameter: 140 mm Ram clamping bore: 64 mm Pressing speed: 0 to 10 mm/s infinitely variable Return speed: 0 to 20 mm/s infinitely variable Main motor power: 22 kW Control pump motor power: 5.5 kW Power connection: 400 Volt, 50 Hz - Table and ram with 22 mm T-slots - Two hydraulic cylinders with electronic precision synchronization control - Infinitely adjustable electric stroke limitation (top and bottom) with digital travel measurement and position display - Mechanical safety support (prevents ram from lowering due to gravity) - One-hand and two-hand operation - Electric tool safety device with signal contact - Pressure presetting independent of stroke (via keyboard with digital pressure display) - Position measuring system left and right via rotary encoder - Electric control: MS-DOS PC with Ageo H v2.23 controller software - Operator panel with swiveling monitor Crjdpfswva I Hsx Ah Hsd - Stroke movement and press speed controllable via joystick - Separate hydraulic unit with electrical cabinet - Hydraulic drawing cushion under the press table - Drawing cushion with ejector function - Continuous stroke control - Floor-level installation - Electric oil temperature monitoring - Operating manual with wiring diagrams Space required for the press upright (L x W x H): 1800 x 1010 x 3470 mm Space required for horizontal transport (L x W x H): 3500 x 1800 x 1200 mm Press net weight: 13 tons Space required for the hydraulic power unit (L x W x H): 1000 x 800 x 3040 mm Hydraulic power unit net weight: approx. 1 ton The machine was used as a tool tryout press in a toolmaking facility. Very good condition.

Būklė: naudotas, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Serial no. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Ram stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber base area: 1500 x 1100 mm Press chamber height: 1650 mm Feed opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale dimensions: 1500 x 1100 mm Bale height: max. 1100 mm Hydraulic operating pressure: 200 bar Motor output: 5.5 kW Power supply: 400 Volt, 50 Hz, 12 Amp. Codpfx Ajvq Rtkeh Herd - equipped with two hydraulic cylinders - door locking via threaded spindle with handwheel - pressing operation only possible with the press chamber door closed - two-hand operation for hydraulic ejection of the finished bale - space available for manual strapping - produces standard industrial bales of 1500 x 1100 x 1100 mm - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Required space L x W x H: 2120 x 1350 x 3220 mm Transport height with hydraulic cylinders lowered: approx. 260 cm Weight: 1.8 tons The machine is in excellent, as-new condition. The new price of the press at BEMA is EUR 22,200 net. BEMA also purchases the packaging waste that you bale with this press.

Būklė: naudotas, Hydraulic Notching Machine with Adjustable Angle SIMASV Type AV 220-6PA Serial No. C1524 Year of Manufacture: 1996 Blade Length: 220 mm Material Thickness (Steel): 6 mm Material Thickness (Stainless Steel): 4 mm Table Dimensions: 950 x 790 mm Table Height: 940 mm Motor Power: 3 kW Power Supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° Cedpforzfh Hox Ah Herd - Angle adjustment via 2 handwheels (left and right) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable back gauges with degree scale - Multiple mm measuring scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Būklė: naudotas, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture 1986 - Retrofit 2000 Crsdpfx Ajdzp Tcjh Hed Pressing force: 200 tons Column distance (front): 2050 mm Column clearance (side): 2030 mm Table size: 2800 x 2000 mm Ram size: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid advance speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Power connection: 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Position measuring system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - Two-hand control panel, placed alongside - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Required installation space (L x W x H): 3700 x 2900 x 5900 mm Total machine height including motor: 5900 mm Space required for transport (horizontal L x W x H): 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, it was used as a die tryout press in a tool shop. Good condition.

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), Tarpo plotis tarp rėmo: 890 mm, išsikišimas: 200 mm, lenkimo plotis: 1000 mm, spaudimo jėga: 280 kN, prijungimo galia: 5,5 kVA, reikalingas saugiklis: 3x 16A, svoris: 3,5 t. Apžiūra vietoje galima. Crjdpszbb R Esfx Ah Hod

Būklė: naujas, High-performance hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Image shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Max. working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Features: - Sideways movable cylinder with rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Cjdpfxjp Dt Uuj Ah Herd Your benefits: - One of the heaviest-duty models on the market - Available with capacities up to 500 tons - Maximum performance and stability - Different frame widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 t upwards) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment

Būklė: naudotas, Pressure: 120 t Stroke: 400 mm Table surface: 1750 x 500 mm Press force: 120 t Working width: 1740 mm Total power requirement: 3.0 kW Machine weight approx.: 2 t Space required approx.: 2 x 1.0 x 1.5 m This 200-ton motorized workshop press with movable cylinder is extremely robustly built and manufactured in the Netherlands. The hydraulic system operates with high precision in both electric and manual modes. Equipped with: - Movable cylinder - Chrome-plated, hardened piston with removable base - Integrated pressure gauge - Pressure regulation - Two speeds - Adjustable work table - Joystick for piston operation - Double-action hand pump for highly precise pressing work - 220V CEE power connection at the rear of the hydraulic unit Crodpst Hmldsfx Ah Hsd The heavy work table can easily be height-adjusted using the hydraulic cylinder. The piston of this press descends in rapid mode and, upon counterpressure, the press automatically switches to a slower speed.

Gamybos metai: 2021, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Specifikacija Talpa: 30 tonų Crjdpoziahdjfx Ah Hed Darbinis ilgis: 1300 mm Smūgio ilgis: 100 mm Gerklės gylis: 200 mm Didžiausias atidarymo aukštis be įrankių: 300 mm Sijos greitas judėjimas: 100 mm/s Lenkimo greitis: 10 mm/s Grįžimo greitis: 90 mm/s Galinio padėklo eiga: 300 mm Ilgis: 1500 mm Plotis: 1200 mm Aukštis: 1910 mm Apytikslis svoris: 2000 kg Įrenginys komplektuojamas su: Cybelec CybTouch 8 valdymu (X & Y ašys) Viršutine ir apatine įranga Šviesos barjerais

Būklė: naudotas, Gamybos metai: 2014, Portalinis hidraulinis presas skirtas lenkimui arba tiesinimui, taip pat suvirintiems gaminiams bei kalnakasybos mašinų mazgų ir kitų agregatų išardymui. Naudojamas mechaninėse, gamybinėse, remonto įmonėse ir kt. Gamintojas: PATENTUS S.A. Tipas: PAT 300-2/250-2 Pagaminimo metai: 2014 Techninės specifikacijos: Matmenys: plotis 4200x3140 mm, aukštis 3600 mm Svoris: 25000 kg Stalo paviršius: 4200 mm x 2140 mm Portalo 1 cilindrų diametras: 2 x 300 mm Portalo 2 cilindrų diametras: 2 x 250 mm Credpshktq Aefx Ah Hed Portalo 1 pavaros jėga: 2 x 1768 kN Portalo 2 pavaros jėga: 2 x 1228 kN Maks. praėjimas: 1240 mm Darbo cilindrų eigos ilgis: 600-660 mm Portalo poslinkis: 1420 mm Komplektacija: - du portalai - stalas - 4 darbo cilindrai - portalo poslinkio cilindras - darbo cilindro poslinkio cilindras - hidraulinė jėgainė su T-100/30 siurbliu (2006 m., kapitalinis remontas 2011 m.) Techninė būklė: naudotas, reikalingas patikrinimas

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, eigos ilgis: 300 mm, stalo plotis: 800 mm, stalo ilgis: 600 mm, gerklės gylis: 330 mm, EXNER hidraulinė vienos kolonos presas NAUJAS, EEX SL 80 serija Spaudimo jėga: 800 kN mechaninis gylio ribotuvas Cjdpfx Ahezcwrne Hjrd Valdymas: Siemens S7 - 1500 Įrengimo aukštis: 450 mm Eiga: 300 mm Stalai: 800 x 600 mm

Būklė: naujas, Slėgis 180 t Eiga 400 mm Stovo tarpas 1500 mm Rėmo plotis 550 mm Atstumas tarp veržliaraktės ir stalo maks. 1000 mm Bendras galios poreikis 7,5 kW Priekinis praviras plotis 1550 mm Šoninis praviras plotis 550 mm Mašinos svoris apie 2100 kg Užimamas plotas apie 2300x1200x2850 mm Įranga: - Tvirta suvirinta konstrukcija - Slėgio cilindras reguliuojamas į šoną - Elektrinis valdymas per valdymo svirtį / rankinis per rankinę svirtį Crodpfsyv I S Hox Ah Hsd - Slėgio indikatorius per manometrą - Medžiagos atramos aukštis reguliuojamas cilindru - CE ženklinimas

Būklė: naujas, Gamybos metai: 2026, spaudimo jėga: 40 t, eigos ilgis: 250 mm, stalo plotis: 700 mm, stalo ilgis: 450 mm, gerklės gylis: 230 mm, įrengimo aukštis: 400 mm, EXNER hidraulinė vieno stulpo presas NAUJAS, EEX SL 40 serija - naujas įrenginys Presavimo jėga: 400 kN mechaninis giluminis ribotuvas Valdymas: Siemens S7 - 1500 Cjdpfx Ahst D Ah Ae Herd Įrengimo aukštis: 400 mm Eiga: 250 mm Stalai: 700 x 450 mm

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 8 120 mm, bendras aukštis: 2 300 mm, Vertikali hidraulinė presė FAMAD HSKG 6m – Pakrovimo laukų skaičius: 3 Cedeyuylnopfx Ah Hsrd Vieno pakrovimo lauko matmenys – Pakrovimo aukštis: 1140 mm – Lentučių ilgis viename lauke: 1530 mm – Didžiausias lentučių plotis: 150 mm – Didžiausias klijuojamų elementų ilgis: 3120 mm – Įdiegta galia: 3 kW – Hidraulinių cilindrų skaičius viename lauke: - 3 vnt. 50x100 mm - 3 vnt. 80x100 mm – Išoriniai matmenys (ilgis x plotis x aukštis): 8120 x 1000 x 2300 mm – Įrenginio svoris: 4800 kg

Būklė: naudotas, Gamybos metai: 1987, mašinos/transporto priemonės numeris: 10064, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 90 041 h, įėjimo įtampa: 380 V, įvesties srovės tipas: trifazis, spaudimo jėga: 200 t, eigos ilgis: 300 mm, stalo plotis: 800 mm, stalo ilgis: 1 290 mm, stalo aukštis: 1 000 mm, stūmoklio plokštės plotis: 800 mm, ramplokštės ilgis: 1 300 mm, alyvos bako talpa: 1 300 l, bendras ilgis: 2 330 mm, bendras plotis: 1 600 mm, bendras aukštis: 4 150 mm, bendras svoris: 21 000 kg, valdymo spintos aukštis: 2 070 mm, valdymo spintos ilgis: 1 500 mm, valdymo spintos plotis: 400 mm, Sertifikuota DGUV iki: 06/2026, štampo pagalvėlės eiga: 70 mm, atstumas tarp šoninių atramų: 420 mm, įrengimo aukštis: 600 mm, Įranga: apsaugos šviesos užtvara, 1x Įrankio fiksavimo įėjimas Dviejų rankų valdymo pultas su avarinio sustabdymo mygtuku (NOT-AUS) 8x Hidrauliniai spaustuvai Elektriškai reguliuojamas gylio ribotuvas Pjovimo smūgio slopinimas Išspirtuvas – traukos pagalvė spaudos stūmoklyje ir spaudos stalo dalyje Elektroninė eigos ir slėgio matavimo sistema Crjdpfxoyvgrhs Ah Hsd Hidraulinė pagrindinė pavaros pompa pilnai perrenkta su nauju pavaros varikliu

Būklė: geras (naudotas), JDS Hydraulic Press Bed: 505 x 510 mm Crjdpfsiki Ahjx Ah Hjd Dimensions: 140 x 140 x 285 cm (LxWxH)

Būklė: geras (naudotas), Gamybos metai: 1991, Elektrinė hidraulinė dirbtuvių presas Cedpfozhfzmsx Ah Hsrd Galia: 50 tonų. Stalo plotis: 800 mm, cilindro eiga: 200 mm.

Būklė: geras (naudotas), Gamybos metai: 1982, Presavimo jėga: maks. 200 kN Saugus atstumas: 100 mm Papildomas eigos ilgis: maks. 10 mm Variklio galia: 3 kW Cedpfsy H Ibvox Ah Hord Įskaitant priedus Pageidaujant už papildomą mokestį galime organizuoti transportavimą ir pakrovimą visoje Europoje. Kainos nurodytos be PVM. Apžiūra įmanoma pagal susitarimą. Susisiekite su mumis – mūsų komanda mielai Jums padės. Įrenginių pirkimas/pardavimas GAMYBOS IR METALO APDIRBIMO STAKLĖS, ĮRANKINĖS STAKLĖS IR KT. PIRKIMAS / PARDAVIMAS Jums reikia kokybiškos, bet nebrangios įrangos savo gamybai? O gal norite parduoti savąją? Daugiau informacijos ar kontaktų rasite per kontaktinę formą.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, shelf length: 121 cm shelf width at widest point: 112 cm distance between shelves: 30 cm pump motor power: 1.5 kW piston diameter: 156 mm external dimensions: length: 183 cm width: 95 cm Crodpjy N Rgysfx Ah Hed height: 188 cm

Būklė: geras (naudotas), Maksimali presavimo jėga: 10 tonų. Darbinis slėgis: 16 MPa Cilindro eiga: 400 mm Nuleidimo greitis: 100 mm/sek. Cjdpfey H Icaox Ah Hord Greitis iki 450 mm/sek. Galingumo poreikis: 5,2 kW Svoris: 1,3 tonos Spaudimo stalas pakeistas! Neoriginalus stalas! Pageidaujant, transportavimą ir pakrovimą galime suorganizuoti visoje Europoje už papildomą mokestį. Kainos nurodytos be PVM. Apžiūra galima susitarus dėl susitikimo. Susisiekite su mumis – mūsų komanda mielai Jums padės. Įrengimų pirkimas/pardavimas GAMYBOS IR METALO APDIRBIMO ĮRANGOS, STAKLIŲ IR K.T. PIRKIMAS/PARDAVIMAS. Ieškote aukštos kokybės, bet nebrangios įrangos savo gamybai? O gal norite ją parduoti? Dėl daugiau informacijos ar kontaktinių galimybių kreipkitės per kontaktinę formą.

Būklė: naudotas, Gamybos metai: 1985, Technical details: Pressure: 3 t Throat depth: 150 mm Maximum ram stroke: 280 mm Shut height with bolster plate (ram/top): 355 mm Distance table/ram: 355 mm Bolster plate on table: 280 x 290 x 50 mm Passage opening in table: Ø 100 mm Ram speed, advance: 0.1 m/s Ram speed, return: 0.3 m/s Pin hole in ram: Ø 20 x 40 mm Height above floor: 800 mm Crodpfxsu Nfvbs Ah Hod Total power requirement: 1.5 kW Machine weight approx.: 370 kg Machine dimensions approx. LxWxH: 0.8 x 1.2 x 1.9 m The single-column press is mounted on a subframe (welded sheet steel construction) Operation via footswitch The press has been retrofitted: - Mount for foil with punching device with automatic feed (pneumatic) - FIBRO punching device (plastic disc with Ø 47.5 mm for punching) - Foot control

Būklė: naudotas, Technical specifications: Pressure: 2.5 t Reach: 155 mm Max. ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram advance speed: 0.08 m/s Ram return speed: 0.32 m/s Crodpju Nfv Uefx Ah Hsd Ram bore: Ø 20 x 45 mm Height above floor: 930 mm Total power requirement: 1.1 kW Approx. machine weight: 500 kg Approx. machine dimensions (LxWxH): 0.85 x 1.0 x 1.7 m The machine is equipped for straightening operations.

Būklė: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter Cedpfxsu Nfvus Ah Herd i.e. *

Būklė: naudotas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Installation height with clamping plate ram/top: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Pass-through opening in table: Ø 100 mm Ram speed forward: 0.08 m/s Crjdpfeu Nfwlex Ah Hsd Ram speed return: 0.32 m/s Pin hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total connected load: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions approx. LxWxH: 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test up to 2.3 t performed. Good condition.