Vienos kolonos presas - hidraulinis

WMW Zeulenroda PYTE 3.15

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 068-071/270, gerklės gylis: 150 mm, stalo plotis: 280 mm, stalo ilgis: 280 mm, atstumo lentelė iki stūmoklio: 355 mm, eigos ilgis: 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates to timely collection between 28.07.2025 and 31.07.2025. Fpodpfx Aowvh R Ajhwsd TECHNICAL DETAILS Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat depth: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. Fedjfxyhfjpfx Ahwepd In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: paruoštas naudoti (naudotas), C tipo presas, hidraulinė presas, PYE 3 t presas, naudotas įrenginys Gamintojas: VEB Wema Modelis: PYTE 3.15 Bendri matmenys: 500 x 730 x 1170 mm Spaudimo jėga: 3,15 tonos Eigos ilgis: 280 mm Stalo dydis: 280 x 280 mm Fjdpfxjw Hc H Hs Ahwspd Elektros duomenys: 380 V; 1,5 kW; 4 A

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE Fpjdpfxeuha Slj Ahwjd - Max. bar diameter: 20 [mm] - Max. machining length: 180 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of powered positions: 4 - Driven tool speed: 6,000 [rpm] - X/Y travel: 50/325 [mm] FRONT TOOL POST - Number of positions: 4 BACK WORKING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Power on hours: 31,902 [h] - Spindle hours: 12,146 [h] EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Fodpfx Aefx Hv Hjhwepd Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), SMG HZPU 8000-3000/2100-S1 Hydraulische Ziehpresse Marke: SMG Fedpen Awd Rsfx Ahwepd Modell: HZPU 8000-3000/2100-S1 Baujahr: 1995 Beschreibung: Hydraulische Ziehpresse in H-Rahmen-Bauweise Presskraft: 800 Tonnen Spannfläche: ca. 3.000 x 2.100 mm Einbauhöhe: max. 1.400 mm

Gamybos metai: 2004, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0441057, Offer 23300 Technical Specifications: - Belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vice – angle adjustable: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 – 76 mm Fodpfxopug D Es Ahwjpd - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required space approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Būklė: naudotas, Gamybos metai: 1997, Slėgis: 40 t Gylis nuo stulpo: 300 mm Eiga: 630 mm Įrengimo aukštis: 900 mm Stalo matmenys: 620 x 520 mm Anga stalelyje: 150 mm Stalo aukštis virš grindų: 600 mm Stūmoklio paviršius: 150 mm Bendras galios poreikis: apie 15,0 kW Fpodpfevuuckjx Ahwsd Mašinos svoris: apie 4,5 t Užimama vieta: apie 1,0 x 1,9 x 3,0 m Leidžiama rankiniam detalių įdėjimui pagal CE standartą Su alyvos hidrauline pavara, valdymas pagal slėgį/laiką ir eigą, dviem rankomis valdoma Presą galima apžiūrėti veikiančią mūsų sandėlyje.

Būklė: geras (naudotas), Gamybos metai: 1983, FGSH 50 TOS KURIM Milling Machine Year of manufacture: 1983 (Czech Republic). Double-swivel head (new bearings, new gears installed). Beam aligned with optical sight. Specifications: Table size: 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Spindle speed range: 45–1400 rpm. Main motor power: 15 kW. Fpodpfx Ahedqp Euswsd Power requirement: 23 kW. Dimensions: Length x Width x Height: 3200 x 2475 x 2620 mm. Weight: 6500 kg.

Būklė: geras (naudotas), Gamybos metai: 1969, Pneumatic gluing press, max. pressure 10 bar, gluing beam with heating, gluing area 550 x 40 mm Fjdpfx Aed Dxqbehwopd infinitely variable temperature setting for upper and lower gluing beams from 0 - 300°C, infinitely variable setting of the gluing dwell time, drive power: 5 kW, 380 Volt-50 Hz, two-hand operation by SIEMENS. Pressure build-up via toggle lever, max. opening stroke approx. 30 mm