Hidraulinis dirbtuvių presas

MIOTAL® WHP 250

Sąlyga: naudotas, Gamybos metai: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Compound rest travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter in front bearing: 152.4 mm Spindle bore: 106 mm Pjdpfx Aoxn Ty Rsf Negg Speed range: 9 - 1800 rpm Number of spindle speeds: 24 Longitudinal feeds: 0.092 - mm/rev Cross feeds: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers max.: 00 kg Maximum workpiece weight—overhung: 750 kg 3-jaw chuck Röhm, Ø Machine dimensions approx.: 4600x1900x1600 mm Weight approx.: 4300 kg Number of feed/thread steps: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout (DRO) - Mobile chip guard along the full length (Plexiglas) - Coolant system - Rapid traverse in Z and X axes - Multifix tool holder size C with 6 interchangeable cassettes - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (center point) MK 6 Bedways in excellent condition!

Sąlyga: naujas, Swing diameter over bed: 410 mm Swing diameter over cross slide: 240 mm Podpfx Ajm Rlb Njf Njgg Turning length: 1000 mm Swing diameter in gap: 530 mm Spindle speed: 65 - 1810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space requirement approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feedshaft lathe with: - 3-axis digital readout system, fully mounted - Electromagnetic main spindle brake - Automatic feed in longitudinal and facing directions - Safety relay - Micrometer end stop - Coolant system - 3-jaw chuck with 1 set each of outside and inside jaws - German instruction manual.

Sąlyga: naujas, Gamybos metai: 2025, Center height: 250 mm Spindle bore: 82 mm Distance between centers: 2000 mm Swing over bed: 500 mm Swing over gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Pgjdpfx Afjd I A Aue Njg Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3,132 x 975 x 1,270 mm

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), Technical Data: - Load capacity: 15,000 kg - Own weight: 960 kg - Workpiece diameter (insertable): approx. 50 - 3,200 mm - Roller diameter: 250 mm - Roller width: 240 mm - Rotational speed: approx. 100–2,000 mm/min Podpjd Iuqaefx Af Nsgg - Dual-pedal foot switch - Potentiometer for stepless speed control

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Psdpfefxyhfex Af Nogg Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Gamybos metai: 2024, Sąlyga: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Pgjdohx Elfepfx Af Neg Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Sąlyga: naujas, Slėgis 28,0 t Išsikišimas 225 mm Eiga 150 mm Stalo paviršius 325 x 300 mm Darbo greitis 2,0 - 9,8 mm/sek Pedpfx Afog Igpne Njgg Grįžimo greitis 12,8 mm/sek Bendras galios poreikis 4,0 kW Mašinos svoris apie 650 kg Reikalinga erdvė apie 1800 x 900 x 2000 mm - NC valdymas stūmoklio eigos nustatymui - Perjungiklis rankiniam arba pusiau automatiniam veikimui - Srauto reguliavimo vožtuvas ir slėgio reguliavimo vožtuvas - Integruotas manometras - Į stūmoklį gali būti sumontuoti įvairūs įrankiai – viduje yra 40 mm skylė įrankiams tvirtinti

Gamybos metai: 1967, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 7011/C, Table clamping surface: 310 x 1400 mm Table travel X-axis: approx. 950 mm Table travel Y-axis: 325/345 mm Table travel Z-axis: approx. 500 mm Spindle speeds: 20 - 1500 rpm Longitudinal and cross feeds: 18 - 620 mm/min Vertical feeds: 18 - 620 mm/min Electrical connection: 380 V kW Required space: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg Podped Rxw Hefx Af Nsgg

Sąlyga: naujas, The KNWP H 100 is a motorized workshop press in the workshop press category, distinguished by its precise and robust design. This hydraulic workshop press features a torsion-resistant, welded frame made of thick-walled profile steel and has been specifically developed for professional applications. The adjustable open support table enables easy pressing in and out of bearings, as well as a wide range of assembly and repair tasks. With a pressing force of 100 t and a stroke of 400 mm, axles, beams, and shafts can be straightened effortlessly. The motorized hydraulic unit ensures efficient workflows. High-quality components guarantee reliable operation even under demanding conditions. Whether for technical workshops or maintenance departments, the KNWP H 100 is the ideal tool. Order your motorized workshop press now and benefit from its performance. Pjdpfx Aeuyh A Eef Nsgg

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 20 000 kg, 20-ton container rotator, turning rolls, complete set 380 V, infinitely variable speed adjustment from 200 to 1000 mm/min. Pgsdpfx Afeifgu Uo Nsg For diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Support rollers temperature resistance: 100°C Synchronized dual drive AC motor, 380 V, 750 W Complete set with hand and foot remote control