Squared Pk5.22 pirkti naudotą (1 619)

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Lsdpfxofg E H Ss Apnehn Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual operation, equipped with an MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens. Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.) Key features: - New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and operation control light. - Display shows: * Diagnostics (messages in the user's language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for the performed cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. - Manual 24-V cycle switch handle, IP55 rated. - Complete program for all special cutting cycles. - Option to set up additional special cutting cycles for specific applications. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed. - Dual blade speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min. - Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut. - Clamping device adjustable to the left and right, with quick-release vice. - Manual blade tension control with electronic converter display on screen. - Base frame with extendable coolant tray. - Electric coolant pump for band cooling and lubrication. - Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil. - Chip cleaning brush. - Machine is designed for pallet truck transport. - Length stop for repetitive cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal bandsaw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 330 mm Cutting range at 90° (flat): 510 x 320 mm Cutting range at 90° (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a 4640 x 34 x 1.1 mm blade for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console on a swivel arm allows comfortable and safe operation from any position. Lsdpfx Ajfg E Ibepnshn Electronic inverter for stepless adjustment of the blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring an engraved, precise fine scale, easily adjustable and mounted.

Būklė: naudotas, Bar loading magazine for multi-spindle automatic lathes, new Manufacturer: Giovanni Cucchi Machine Type: Bar loading magazine for multi-spindle lathes Model: CMSP/CMSPF Version: Side loader available as surface-loading or bundle-loading magazine Overview of CMSP / CMSPF: Proven technology – in use for decades For this generation of loaders, the material feed is performed by the magazine. CMSP/CMSPF bar loading magazines are mounted on rails, allowing them to be easily disconnected from the machine at any time by unlocking the quick-release mechanism. These magazines do not require bar tubes on the machine and are bolted directly to the lathe. Operation in both automatic and manual modes is possible. The magazine is rail-mounted, enabling operators to easily disengage it from the machine at any time by unlocking it. To switch bar diameters, only the collets in the magazine need to be changed. The centering unit automatically adjusts to the new diameter. It dampens all types of vibrations during machining (compatible with round, square, and hexagonal material!) and prevents the bar from bending in the channel. This enables machining operations at very high spindle speeds, even with larger diameters. Quick changeover to the next diameter to be processed and a significant reduction in vibration, thanks to the proven double centering system, are just two of many advantages of this system. Advantages of CMSP/CMSPF magazines at a glance: - Short loading times - Optimal bar material guidance through double or, if required, triple centering units - No oil flooding – dry running - Rapid adjustment to the required diameter - Compact design – space-saving - Very low wear of the guide channel - Self-adjusting centering unit - Significant vibration reduction Lhsdoft Ti Topfx Apnjn Please contact us for further information and images via mail(at) or

Būklė: naudotas, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120 mm Lodpjfc T Ugefx Apnjhn Cutting range at 45° (square): 100 mm Cutting range at 45° (rectangular): 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5/2.2 kW Machine weight approx. 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine enables mitre cuts from 45° right to 45° left. The vertical alignment allows sawing operations with the head tilted from 0° up to 45° to the left.

Būklė: naujas, Cutting capacity at 90 degrees: round 305 mm Lhjdpfxofd Abae Apnen Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw band length: 3375 x 27 x 0.9 mm Band speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support - Automatic cooling system The illustration shows the semi-automatic version.

Būklė: naujas, Cutting capacity at 90°: round 172 mm Cutting capacity at 90°: square 170 mm Cutting capacity at 90°: rectangular 170 x 170 mm Saw blade dimensions: 2035 x 20 x 0.9 mm Dimensions (L x W x H): 430 x 960 x 520 mm Blade speed: 30 - 80 m/min Total power requirement: 1.5 kW Machine weight: approx. 38 kg SPECIAL OFFER PRICE!! Berg & Schmid - Mobile Bandsaw PBS 171 ESC Powerful and particularly robust metal bandsaw with die-cast aluminium saw table and steplessly adjustable cutting speed for Lsdpfx Asfgyhzopnjhn mitre cuts up to 60° Optional: Machine base Type 20508

Būklė: naujas, Cutting diameter: 220 mm Ledpfofgyh Nex Apnohn Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90°: round 220 mm Cutting capacity at 90°: square 210 x 210 mm Cutting capacity at 90°: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 240 kg Space requirement: approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a fully automatic down-feed saw for mitre cuts from 0° to 60° to the left. After completing the cut, the machine stops automatically via a safety limit switch. The down-feed rate is infinitely variable and can be adjusted through a hydraulic system. Raising the saw arm after the cut can be done to any desired position, and the saw arm will remain securely in your chosen position. The Z241/R comes equipped with the following features: Hydraulic cylinder, coolant pump, excenter clamp, base frame, saw blade, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Ljdpfxjfgyh Te Apnjhn Machine weight: approx. 0.42 t Double miter metal bandsaw, GBS 250 Super AutoCut - Miter cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vise - Heavy-duty, large material support - Automatic cooling system

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Ljdpfx Ajfgyicepnehn Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for rapid cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams, as well as solid material. The material is clamped vertically on the feed and discharge sides. Starting from the K-tech 800H, the machine comes standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC control allows the programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is mounted separately and is guided via ball-bearing linear guides, precision-ground rack, and a robust, frequency-controlled geared motor. Lhodpfefgyifex Apnjn

Būklė: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250 x 600 mm Saw blade length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space required: approx. 5.7 x 4.0 x 2.75 m Lhjdpfefgyigsx Apnen 2-column bandsaw for rapid cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams, as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. From K-tech 800 H onward, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming up to 90 cutting programs with various cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening gripper jaws” that are hydraulically controlled. This ensures safe gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and guided by precision linear ball guides, a ground rack, and a frequency-driven, robust gear motor.

Būklė: naujas, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw in semi-automatic design with stepless mitre adjustment on both sides 30° - 45° - 90° - 135° With patented mitre system (ERP No. 0491120). Especially suitable for universal use with different cross-sections, materials, and frequent changes of mitre cuts. The pivot point remains unchanged at any angle setting, ensuring precise length measurement at 90° and in the mitre range. MEBA Eco Saw Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically optimized and offers an excellent price-performance ratio. Easy central operation. The machine control complies with CE standard 89/289. Technical data: Cutting range: round / flat 90° 335 / 500 x 335 mm 45° right 330 / 305 x 335 mm 30° right 180 / 170 x 335 mm 45° left 305 / 305 x 335 mm Cutting speed: AC frequency-controlled drive, infinitely variable from 15–150 m/min, adjustable at the control panel Drive - Saw blade 3 kW; 400 V, 50 Hz - Hydraulic system 0.55 kW - Coolant pump 0.11 kW Saw feed: Infinitely variable up to 300 mm/min, hydraulically controlled Saw blade tension: Mechanically with torque wrench Saw blade dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without installation elements) Weight: 1,320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical alterations reserved. Standard equipment MEBA 335 DG-500: Semi-automatic sawing sequence with clamping, sawing, and automatic return to the preset height after the cut MEBA high-performance package: Stepless hydraulic cutting pressure and feed monitoring at the back of the saw blade. This ensures optimal settings for every sawing application, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Manual mitre adjustment, digital readout with 0.1° accuracy Rapid approach lowering of the saw frame via push button to material edge Patented double-mitre system (ERP No. 0491120) Unique double mitre bandsaw, where double-sided mitres can be set simply and efficiently by swivelling the saw frame and the material support Lhodpfxet Dpw Ro Apnjn Automatic movement of the clamping jaws and digital mitre adjustment. The material clamp moves automatically in the direction of the desired mitre, ensuring the material is always clamped square and close to the saw blade. The mitre pivot point is the intersection between saw blade and fixed clamp jaw, meaning no change in length dimension when the angle position is changed. Hydraulic full-stroke workpiece clamping. Rapid material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Robust twin-column linear guided saw frame Saw blade set at 3° incline to the material support surface Centralised machine control Saw frame clearance height adjustment Movable blade guide arm—adjustable to material width Saw blade guide rollers with carbide inserts Automatic swarf removal brush Saw blade tensioning with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant device (approx. 100 litres).

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast in a single piece, very quiet and low-vibration cutting Lsdsupw R Aopfx Apnehn • Removable chip tray (designed for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material and feed unit • Foldable safety guard • Fine feed rate adjustment • Semi-automatic cutting! • CNC control for optimized workflows Allows input of various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. one sawing program with multiple cut lengths • Automatic (CNC) feed unit via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum remnant length 170 mm. Including: - Micro-spraying device - Leveling elements

Būklė: naujas, Cutting capacity at 90 degrees: round 125 mm Cutting capacity at 90 degrees: square 125 mm Cutting capacity at 90 degrees: rectangular 127 x 125 mm Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. With this metal band saw, you work not only precisely but also quickly: The blade speed is adjustable between 38 and 80 metres per minute. Ljdjupw R Nepfx Apnjhn With a weight of just 25 kilograms, the saw is easily portable.

Būklė: naudotas, Gamybos metai: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw blade length: 2965 x 27 x 0.9 mm Table height: mm Blade speed: 37 / 76 m/min Total power requirement: 1.0 kW Ljdpfx Aeu Sbpvepnehn Machine weight: approx. 0.38 t Space requirement: approx. 1.0 x 1.6 x 1.4 m Double mitre band saw

Būklė: naudotas, Gamybos metai: 2003, Apvalus plienas, 32 mm Kvadratinis plienas, 30 mm Kampinis plienas, 80 x 80 x 8 mm Pjovimo našumas (plieninėms plokštėms), 80 x 13 mm Šтамavimo jėga, 36 t Išsikišimas, 170 mm Darbinis eismas, 28 mm Darbinis aukštis, 980 mm Medžiagos storis, 28 x 13 mm Skylės skersmuo plieninėje plokštėje, 25 x 10 / 30 x 8 mm Mašinos svoris, apytikriai 0,8 t Reikalingas plotas, apytikriai 1,2 x 0,8 x 1,9 m Profilinių plienų žirklės su: - 1 pedalas - atraminis stalas Lhedpfx Asrc In Aspnjn - stačiakampis išlyginamasis įtaisas - skylų štampavimo įrankis, įskaitant įrankius

Būklė: naujas, Condition: New Ledpfx Aoyv Iqvjpnehn Delivery time: approx. 2 weeks from order Country of origin: Italy Price: €17,940 Leasing rate: €344.45 Grinding wheel dimensions: Ø 200x78x78 mm Speed: 2800 rpm Distance grinding wheel to table (without magnetic chuck): 300 mm Magnetic chuck: 300x150x55 mm Grinding area: 350x150 mm Table: 500x160 mm Motor power: 3.6 kW Length: 1020 mm Width: 820 mm Height: 2170 mm Weight: 440 kg This surface grinding machine with fixed table is based on the R.V. 500 model but differs by its long, quadruple-guided column with additional robust column support. Owing to its rigidity and geometric stability, this surface grinder is ideally suited for grinding precision parts of considerable height: single or series parts from toolmaking, molds, dies, gears, and many more. The nuts of the vertical feed spindle and the alignment pins for axis alignment on this fixed-table grinding machine ensure consistently optimum operating conditions. Cast iron bed for lasting geometric stability of the grinding machine. Cast iron column protected by bellows and mounted in four adjustable precision bearings, generously sized for this type of fixed-table grinding machine. Three-phase motor with double-shell air cooling to prevent motor overheating during continuous operation and to maintain constant temperature of the motor shaft and bearings. Hardened, ground and dynamically balanced spindle, mounted in precision ball bearings, generously dimensioned for this type of surface grinder with fixed table, self-adjusting via spring pre-tension to compensate for thermal expansion. Vertical feed spindle mounted in opposing, adjustable ball bearings for optimal movement, keeping the grinding wheel area free of obstacles and preventing dust accumulation. Metal bellows offer further protection of the vertical feed spindle. Opposing bronze nuts compensate for wear of the vertical feed spindle over time. Alignment pins align the grinding machine motor with the axis, ensuring surface parallelism even over prolonged use. The handwheel is triple-supported and connected to the spindle via two helical gears. It features a graduated drum supported by an axial bearing, enabling a material removal per pass of 0.01 - 0.02 - 0.03 mm. Rapid traverse per handwheel revolution is 2 mm. A rotary knob with lever enables programmable micrometric feed of 0.01 - 0.02 - 0.03 - 0.04 mm per pulse, facilitating operation by eliminating the need for a continuous step control. Slot for optimum utilization of grinding wheel working height and for clamping non-magnetic parts and accessories such as magnetic chuck, self-centering chuck, and angle plates. Low-voltage controls, protective devices, indicator lights, and all necessary equipment to comply with current safety and conformity standards for this type of surface grinding machine with fixed table. Handles, design, and dimensions of the fixed-table grinding machine conform to current standards...

Būklė: naujas, Saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 x 105 mm Cutting capacity at 90°: flat 180 x 70 mm Cutting capacity at 45°: round 120 / 110 mm Cutting capacity at 45°: square 100x100 / 95x95 mm Cutting capacity at 45°: flat 135 x 60 mm Speed: 1700 / 3400 rpm Control system: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions (L x W x H): 1240 x 1360 x 1800 mm Features: - NC semi-automatic high-performance circular saw * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor controller * user-friendly interface with display and mechanical buttons * saw head start and end positions can be saved - manually operated safety hood - mechanical stops at -45°, 0°, +45° * enable quick positioning of the saw head - pneumatic vice with quick clamping * pneumatic clamping system allows adjustment of clamping pressure * depending on the hardness of the material being cut * optional pneumatic vertical vice available - robust cast iron construction ensures vibration-free operation & maximum precision - the saw head can also be tilted up to 45° - two saw speeds - base frame with lockable door - pneumatic coolant lubrication - machine base Scope of delivery: - adjustable length stop 600 mm - tool kit - mounting adapter for infeed roller conveyor incl. 1 support roller - tool kit Lodpfx Apjxaa Hnenjhn - detailed operating instructions, maintenance manual etc. - Saw blade not included!

Būklė: naujas, Saw blade diameter: 0 x 30 mm Cutting range at 90 degrees: round 130 mm Cutting range at 90 degrees: square 125 x 125 mm Cutting range at 90 degrees: flat 190x100 / 230x50 mm Cutting range at °: round 110 mm Cutting range at °: square 95 x 95 mm Cutting range at °: flat 130 x mm Rotational speed: 2800 rpm Mitre cuts -/+ ° Total power requirement: 2.2 kW Machine weight approx. 2 kg Dimensions (L x W x H): 1600 x 750 x 1000 mm Features: - Semi-automatic high-performance circular saw (UNDERFLOOR) * For mitre cuts from ° right to ° left * For aluminium and light metal alloys * With rising saw blade Ledexaa Huepfx Apnshn - Manually operated safety guard (optionally with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) - Heavy cast iron construction ensures vibration-free operation & maximum precision - Large, bearing-mounted rotary table with internal indexing at 0/° * Enables quick adjustment for mitre cuts - Extraction nozzle for connection to chip extraction system Scope of delivery: - 2x pneumatic vertical clamps with quick adjustment - Tool kit - Detailed operating instructions, maintenance manual, etc. - Air blow gun - Machine is supplied without saw blade!

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vise width: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided miter cutting up to 60° - Automatic saw bow lowering * Steplessly adjustable feed rate * Automatic shut-off at end of cut - Manual cutting function selectable - 2 blade speeds - Carbide blade guides - 1 saw blade included - 1 angle stop included - Integrated chip removal brush - Control panel at front right - Hydraulic tensioning device for saw blade * With analog pressure gauge (manometer) - Machine base/frame - Operating manual in German Lhjdpoxaa H Isfx Apnsn SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing device

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, bendras svoris: 600 kg, krovinių skyriaus plotis: 3 000 mm, krovimo vietos ilgis: 3 000 mm, krovos erdvės aukštis: 2 600 mm, Įranga: apšvietimas, „Villex Mikro Wood Pavillon 3.0“ – modernus 3 x 3 m dydžio modulinis pastatas, pagamintas iš aukštos kokybės medienos! Ledpfx Apjzzyraonjhn „Villex Mikro Wood Pavillon 3.0“ suderina funkcionalią erdvę su patrauklia medienos išvaizda – idealus pasirinkimas visiems, kurie vertina modernų, aukštos kokybės ir tuo pačiu pakviestiną dizainą. Dėl kompaktiškų matmenų – 3,00 x 3,00 m – jis siūlo apie 9,0 m² naudingosios ploto ir puikiai tinka kaip reprezentatyvi biuro, priėmimo, susirinkimų ar darbo kabineto erdvė, taip pat kaip modernus sodo biuras. Šiltos medienos išvaizdos plokščių ir stilingo, antracito spalvos (RAL 7016) rėmo derinys suteikia paviljono elegantišką išvaizdą, kuri harmoningai įsilieja į bet kurią aplinką. Apmokėjimas ir atsiėmimas galimi iš anksto susitarus. 🔹 PAGRINDINĖS SAVYBĖS IR DUOMENYS Modelis: „Villex Mikro Wood Pavillon 3.0“ Būklė: Naujas ir pilnai surinktas Išorės matmenys: 3,00 m x 3,00 m x 2,60 m (ilgis x plotis x aukštis) Naudingasis plotas: apie 9,0 m² (kvadratinis, optimaliai išnaudojamas planas) Svoris: apie 600 kg (ypač lengvas, lengvai transportuojamas ir perkeliama) Spalvų schema: Išorė: šilta medienos išvaizda kartu su elegantišku antracito rėmu (RAL 7016) Viduje: šviesi, moderni ir pakviestina Izoliacija / šilumos izoliacija: 5,0 cm storio izoliacija, skirta sezoniniam ir vidutinio laikotarpio naudojimui 🔹 AUKŠČIAUSIOS KOKYBĖS ĮRANGA Įėjimas: modernios, pilnai stiklinės durys, užtikrinančios daug natūralios šviesos ir pakviestiną atmosferą Elektros įranga (iš karto paruošta naudoti): Jungtys: 32A CEE stiprios srovės jungtis 3x dvigubos lizdai biuro įrangai, nešiojamam kompiuteriui ir kitiems prietaisams 2x LED lempos, užtikrinančios puikią patalpos apšvietimą 1x jungiklis ir saugiklis 🛠 GALIMAS GAMINTI PAGAL UŽSAKYMĄ IR ĮDIEGTI PAPILDOMĄ ĮRANGĄ Ar jums reikia individualių pakeitimų ar papildomų parinkčių? Pagaminame konteinerius tiksliai pagal jūsų pageidavimus! 🚚 PRISTATYMAS IR APMOKĖJIMO TVARKA Pristatymas: pristatome visoje šalyje savo specializuotais transporto priemonėmis / su kranu Pristatymo laikas: Sandėlyje esantys standartiniai modeliai: apie 1–2 savaitės Individualus, specialus užsakymas: apie 4–6 savaitės Mokėjimo būdai: „PayPal“ Bankinis pavedimas (išankstinis apmokėjimas) 📞 PAPRAŠYKITE NEĮSIPAREIGOJANČIĄ PASIŪLĄ DABAR! Leiskitės nemokamai pakonsultuoti! Parašykite mums tiesiogiai per skelbimų svetainę arba skambinkite mums – paruošime jums individualų pasiūlymą.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, bendras plotis: 865 mm, bendras aukštis: 2 175 mm, bendras svoris: 470 kg, pjovimo greitis: 68 000 mm/min, gaminio ilgis (maks.): 1 335 mm, 2020 m. pagamintas metalinis diskinių pjūklų staklės. Šios „Behringer VMS 370 PV“ staklės gali pjauti iki 130 mm skersmens apvalius ruošinius ir iki 120 x 120 mm dydžio kvadratinius ruošinius. Jos turi 370 mm skersmens pjovimo diską ir hidropneumatinę pjovimo pažangą. Jei ieškote aukštos kokybės pjovimo galimybių, apsvarstykite galimybę įsigyti mūsų parduodamą „Behringer VMS 370 PV“ staklę. Dėl išsamesnės informacijos susisiekite su mumis. • Pjovimo galia 90° kampu: • Apvalūs: iki 130 mm skersmens • Kvadratiniai: iki 120 × 120 mm • Plokščios: iki 200 × 100 mm • Pjovimo galia 45° kampu: • Apvalūs: iki 130 mm skersmens • Kvadratiniai: iki 100 × 100 mm • Plokščias: iki 140 × 100 mm • Pjovimo galia esant 30° kampui: • Apvalūs: iki 105 mm skersmens • Kvadratiniai: iki 90 × 90 mm • Plokščios: iki 100 × 100 mm • Pjūklo skersmuo: 370 mm • Variklio galia: 2,0 / 2,6 kW • Pjūklo disko sukimosi greičiai: 17 / 34 / 68 aps/min • Papildomi pjūklo greičiai: 8 / 16 / 32 / 64 aps. per minutę • Pjūklo padavimas: hidropneumatinis • Medžiagos fiksavimas: pneumatinis • Pjovimo kampo diapazonas: nuo -45° iki +45° Lhedpfxjz Dg Idj Apnjn • Papildomas kampinis pjovimo kampas: 30° į vieną pusę • Aušinimo sistema: integruota • Medžiagos atramos aukštis: 900 mm

Būklė: naudotas, Gamybos metai: 1998, Skardos plotis 3050 mm Ledoz Dky Rjpfx Apnehn Skardos storis 6,5 mm Atramų atstumas 3100 mm Atramos gylis 1000 mm Pjūvio ilgis – reguliuojamas, mm Pjūvio tarpas – reguliuojamas, mm Vardinė galia 12,0 kW Apytikslis mašinos svoris 5,5 t Reikalingas plotas apytiksliai 3,5 x 2,2 x 1,8 m Hidraulinės skardos žirklės su: - Pjūvio ilgio reguliavimu - Pjūvio kampo reguliavimu - Atraminėmis konsolėmis - Kampiniu atramu - Galiniu dangčiu - Mobilus medžiagos konteineris

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1995, pavaros tipas: hidraulinis, pjovimo kampas (min.): 0,5 °, pjovimo kampas (maks.): 2 °, maks. lakšto storis: 13 mm, galinis atmušas: 1 000 mm, galia: 18,5 kW (25,15 AG), bendras svoris: 17 000 kg, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, Hidraulinė žirklinė LVD HST-C 40/13 Pagaminimo metai: 1995 Serijos numeris: 22764 Techninės specifikacijos: Maksimalus apdirbamo skardos storis: 13 mm Pjovimo ilgis: 4050 mm Atstumo reguliavimo diapazonas: 1000 mm Pjovimo kampas: 0,5°–2° Peilio tarpas: 0,1–2,2 mm Pjovimų skaičius per minutę: 7–28 Peilių skaičius: 21 Variklio galia: 18,5 kW Svoris: 17000 kg Alyvos talpa: 300 l Įtampa: 3 x 380 V Įranga: Atitinka saugos normas CE Lhedpfx Asz D Dnbepnsn 1 kvadratinis atraminis strypas, L1500 mm 2 papildomi atraminiai strypai, L1500 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Werkbank-Drehmaschine WABECO 10200 Spitzenweite: 500 mm Max. Umlaufdurchmesser über Bett: Ø 200 mm Max. Umlaufdurchmesser über Planschlitten: Ø 120 mm Spindeldurchlass: Ø 26 mm Spindeldrehzahl: 10 bis 1000 U/min (über elektronischen Drehzahlregler) Vierkant-/Schwenk-Reitstock Dreibackenfutter Ø 100 mm Baujahr: 2001 Reitstock: MK2 Automatischer Längsvorschub Lieferung mit den Zahnrädern (siehe Foto) Lieferung ohne Untergestell Spannung: 220 V, einphasig Abmessungen (L x B x H): 1200 x 300 x 450 mm Gewicht: ca. 100 kg Lhodpfx Apez Izwuonjn