Rps Fas096 pirkti naudotą (186)

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging Hnjdofz U Sajpfx Ab Rst • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Automation Use of a photoelectric cell The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece, giving you the capability to activate the spray guns only when the object is within range, and to deactivate the guns immediately after processing is complete. The photoelectric cell is included in the standard equipment package. Identification of parts using special tags. A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, identifies the coated part, activates or deactivates the guns at the correct time, thereby reducing energy and powder consumption. Vertical detection of workpiece features. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the timing for when the part is due to appear in the gun area, allowing for selective activation or deactivation of the guns. Use of light barriers with multiple horizontal and vertical sensors. This solution enables precise measurement of the dimensions of the workpiece, allowing manipulators to be adjusted as well. Advantages of using gates and photoelectric cells The main advantages of using photoelectric cells or light barriers are energy and powder savings. It eliminates coating zones without workpieces. By using light barriers, precise gun control is achieved. Our lines can optionally be equipped with photoelectric cells or light barriers. The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece and, therefore, to activate spray guns only when the object is within their operational range, and to deactivate the gun immediately upon completion of coating. Identification of parts with special tags A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, recognizes the coated part, switching the guns on or off at the appropriate time – thereby saving energy and powder. By using light barriers with horizontal detectors, the PLC can analyze the vertical geometry of the workpiece. The PLC determines when the part will appear in the gun chamber, enabling selective activation or deactivation of the spray guns. Use of light barriers with multiple horizontal and vertical sensors This solution allows for the precise measurement of the workpiece's dimensions, enabling adjustment of the manipulators. The primary benefits of using photoelectric cells or light barriers are powder and energy savings. It eliminates painting areas without workpieces. Using light barriers ensures precise gun control. Vertical array of spray guns 8 pcs. guns Hodpeflq Spofx Ab Rjnt Control – profiControl 10" Cyclone – CK-D1250 Dust collector – OZ-8H Center – RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Axis X MX-100 x 2 pcs. Horizontal gate – Horizontal gate W400 x 2 units Vertical gate – H2000 vertical gate The maximum coating speed is 1.65714285714286 m/min 0 pcs. tractors Air volume required: 10,188 m³/h for operation Minimum cabin passage required: W900mm H2100mm Duct diameter 500 mm – minimum 16.9 m/s 16 m/s Air consumption: 1210 l/min + Sug. SC-20 compressor Min. St

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity: 6-7 kg • Air consumption during coating: 15 Nm³/h • Air consumption during cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling with fresh paint from cartons • Two operating modes: color recovery with mixing or total waste • Sealed, fluidized paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refilling with paint from cartons Hjdjfz Dkgepfx Ab Rsnt • Paint level sensor in refill box • An acoustic alarm warns the operator when the carton paint supply is low • Center is connected to the booth control via ModBus protocol • Programmable powder suction valve keeps the powder center clean

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes Hnjdpfxefz U Swj Ab Rot • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box Hsdpfxefz Dknj Ab Ront • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes Hjdpofz U Rcjfx Ab Rent • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Hnodpfxofz U Rrs Ab Rjt Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Būklė: naudotas, Technical details: X-axis travel: approx. 1000 mm Y-axis travel: 400 mm Z-axis travel: 420 mm Control system: Siemens Sinumerik 805/810 Tapping capacity up to max.: M22 Hjdpfxju Idnmj Ab Rsnt Drilling capacity in St 60 (solid): 25 mm Milling range: Capacity in St 60: 150 mm Saw stroke: approx. 55 mm Spindle speed range - stepless: 20–6000 rpm Operating hours: manual 26,180 h Tool turret: 12 stations Tool holder: SK 40 Total power requirement: 18 kVA Machine weight approx.: 5.0 t Machine dimensions (LxWxH): 2.9 x 2.5 x 2.8 m Transport dimensions (machine): 2.4 x 2.6 x 2.75 m Equipment: - Special equipment / device (modular clamping system) for milling operations on profile materials with an automatic cut-to-length unit for workpieces using a circular saw module (non-functional) - Horizontal workpiece clamping (positive-locking) with vice clamping system and parallel bars (currently approx. 80 mm) - Tool changer: Chiron basket-type tool changer - Tool clamping: mechanically locked, pull-in force 5000 N - Chip conveyor by Knoll - Loading and unloading system: FMB LM RP 3000 The machine is not operational. Sale at clearance price.

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone. Hnsdozg Ty Ujpfx Ab Rjt

Būklė: labai geros būklės (naudotas), Eos EOSINT Plastic Laser Sintering System Here we are offering an Eos EOSINT Plastic Laser Sintering System. Eos EOSINT Plastic Laser Sintering System P385 The following items are included with the EOS P385 system: Build chamber container Powder container Chiller: Termo TEK Termochiller 1100 Hsdpfxszdyx Es Ab Rjnt The following upgrades have already been completed: Software: CDs Eosint P3 Process Software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser replacement on 15.05.2008 X-axis drive motor: replacement with used motor on 04.05.2020 Pyrometer replacement on 30.06.2020 Build size: 350mm x 350mm x 610mm Voltage: 3/N/PE/400V, Frequency: 50 Hz Connected load: 8 kW, Fuse protection: 32 A Max. laser power: 100 W, Laser class (open): 4 Laser class (closed): 1 Weight: 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors in the provided information!) If you have further questions, we are happy to answer them by phone.

Būklė: geras (naudotas), Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Model: SPA 12/25 RP Type: Hydraulic Power Unit Hnedpfxshvml Ds Ab Rjt Complete plant closure, large selection of mezzanine floors, pallet racks, shelving racks, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. You will find more items – new and used – in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Hedpot N Ix Rsfx Ab Rent Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), I am selling a heavy-duty wide belt sander SGJ 1300R-RP. Year of manufacture: 2008 Configuration: Steel drum / 37 kW motor Rubber sanding drum with shoe / 22 kW motor Cleaning unit with extraction hood Feed speed with variable adjustment Pressure shoes for short elements on each unit. Infeed and outfeed tables for long elements. Hnsdpokd Am Eefx Ab Ret Working height: 3–150 mm Working width: 1300 mm Total power: 64 kW Total weight: 4000 kg Condition: Very good! Available immediately.

Būklė: naujas, Gamybos metai: 2026, Parduodu vidutinės klasės išilginį ir kraštų pjūklą KUSING RP-OP-600 3.0. Hodpfx Absx Utyaj Rent Ši staklė tinka nedideliems apdirbimo darbams, daugiausia plokščių medžiagai. Staklė prieinama šiose versijose: FIX = fiksuoto dydžio pjūklo diskas MANUAL = rankiniu būdu reguliuojamas pjūklo diskas EL DIGITAL = elektriškai reguliuojamas pjūklo diskas su skaitmeniniu matavimu Staklės parametrai: Staklės matmenys (I x P x A): 1400 x 1700 mm Darbinis aukštis: 830 mm Padavimo plotis: 700 mm Maksimalus pjovimo aukštis: 80 mm Veleno skersmuo: 50 mm Aktyvus veleno ilgis: 550 mm Įrankio skersmuo: 300 mm Veleno apsukos: 4000 aps./min Padavimo greitis: 4–18 m/min / 6–30 m/min Padavimo variklis: 0,55 kW Vilkančiųjų ritinėlių skaičius: 3 Prispaudžiančiųjų ritinėlių skaičius: 2 Pagrindinio variklio galia: 7,5 / 11 / 15 / 18 kW Padėties diskų skaičius: 1 + 1

Būklė: naujas, Gamybos metai: 2026, I am selling a KUSING RP-OP-600 PRO longitudinal saw. This high-performance longitudinal saw features one or two digitally adjustable saw blades that can be set simultaneously. The control system stores five settings for quicker and more precise operation. The machine is equipped with both upper and lower feed systems, utilizing six steel feed rollers to ensure maximum traction even with thicker materials and cants, up to a maximum height of 105 to 130 mm. The machine can be fitted with any number of saw blades. A clamping system with movable housings allows for quick dimensional changes. Technical specifications: Feed width: 700 mm (up to 900 mm) Feed roller length: 600 mm Number of feed rollers: 6 Hsdpfxjx Utyys Ab Rjnt Maximum cutting size: 550 mm (700 mm) Motor power: 11 / 15 / 18 kW Max. blade diameter: 350 mm Maximum cutting height: 105 mm (130 mm) Shaft diameter: 50 mm Shaft length: 600 mm The machine meets all safety requirements according to CE standards. Manufactured in Slovakia. The machine can be custom-configured, e.g. with the number of lasers, choice of infeed and outfeed roller tables, etc.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, stalo ilgis: 2 270 mm, stalo plotis: 1 600 mm, darbinis ilgis: 2 270 mm, darbinis plotis: 1 600 mm, X ašies eiga: 2 270 mm, Y ašies eiga: 1 600 mm, pjovimo greitis: 60 000 mm/min, pozicionavimo tikslumas: 0,005 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras ilgis: 3 990 mm, bendras plotis: 2 340 mm, bendras aukštis: 1 600 mm, Įranga: aušinimo blokas, dulkių šalinimas, dūmų ištraukimas, We are offering this used eurolaser LCS G3 XL-1600 laser cutting machine, year of manufacture 2020. System type: LCS G3 XL-1600 Serial number: 1308S8364P Year of manufacture: 2020 - Voltage: 400V/50Hz - Operating temperature: +10° to 32°C - Working area: 2,270 x 1,600 mm - Max. material width: 2,350 mm, unlimited length - Cutting speed: 1-1000 mm/s - Axial acceleration up to 9.3 m/s² - Measuring system precision: 0.005 mm - Servo-controlled DC motors - Dimensions: 3990 x 2340 x 1600 mm - RS 232C hardware interface - HPGL software - LCD control panel - 2 pcs lenses – 5" and 7.5" - Laser cutting software Laser Scout Connect (LS-CON) Post-processor for laser system control Includes LaserScout PLANNER module – cutting time calculation - Watchdog (E-WD) Hnsdpsyu N H Uefx Ab Rst Real-time monitoring and remote diagnostics of critical system functions. - LaserScout POSITION+ (LS-POS+) software POSITION is a package including software for working with a camera to detect reference marks. The package also includes the camera and Planner for cutting time calculation. - Cooling unit (CU-450) Water-air cooling unit with closed circuit Ambient temperature +10° to +32° Voltage 400V, 3~, 50Hz - Top extraction unit (EU-015-1) 1 x 1.5 kW vacuum motor Automatic voltage protection Voltage 400V, 3~, 50Hz - Exhaust unit (EU-030-2) 2 x 3.0 kW vacuum motors Automatic voltage protection Voltage 400V, 3~, 50Hz - Raster cutting table (RP-XL32) Black anodised table with perforations - PC, 21” monitor If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Gamybos metai: 2016, būklė: geras (naudotas), Retigo O611ic Kombidämpfer 2016, RP-Serie, Edelstahl-Kombidämpfer, elektrisch, 10 kW, mit Dampf, mit 7 Blechen, einstellbare Timer- und Temperaturregelung, auf Blechwagen montiert, 1-phasig. Hedorywxkjpfx Ab Rent

Gamybos metai: 2016, būklė: geras (naudotas), Retigo O2021ic kombinirovannaya pech 2016 god, seria RP, kombipech iz nerezhi, elektricheskaya, 59 kW, s parom, s telezhkoy na 20 protivney, s reguliruemymi taymerom i termostatami, v komplekte dve telezhki, 1 faza Hnedorywvaepfx Ab Rjt

Gamybos metai: 2016, būklė: geras (naudotas), Retigo O2021ic Kombidämpfer 2016, RP-Serie, Edelstahl-Kombidämpfer, elektrisch, 59 kW, mit Dampf, mit Wagen für 20 Bleche, einstellbare Zeit- und Temperatursteuerung, mit zwei Wagen, 1-phasig Hnjdorywu Sepfx Ab Rot

Būklė: naudotas, rida: 128 153 km, galia: 107 kW (145,48 AG), pirmoji registracija: 03/2012, kuro tipas: dyzelinas, tuščias svoris: 3 310 kg, didžiausias leistinas svoris: 4 180 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 6x4, ratų bazė: 2 450 mm, stabdžiai: kitas, spalva: oranžinė, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: Euro 5, pakaba: plienas, sėdimų vietų skaičius: 2, veikimo valandos: 6 006 h, Įranga: ABS, autonominis šildytuvas, diferencialo užraktas, kabina, oro kondicionavimas, priekabos jungtis, statymo jutikliai, suodžių filtras, vairo stiprintuvas, visų varančiųjų ratų pavara,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, bendras svoris: 250 kg, bendras aukštis: 1 294 mm, ašių skaičius: 6, Ši 6 ašių ABB IRB 1600 roboto ranka buvo pagaminta 2010 m. Ji turi universalias montavimo galimybes, įskaitant montavimą ant grindų, sienos ir apverstą montavimą, ir yra suderinama su IRC5 ir "OmniCore" valdikliais. Didžiausia rankos apkrova - 30,5 kg, o pasiekiamumas - iki 1,45 m, todėl ji idealiai tinka įvairioms programoms. Apsvarstykite galimybę įsigyti šią ABB IRB 1600 roboto ranką. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. • Tipas: 6 ašių pramoninis robotas (palaiko iki 3 išorinių ašių per MultiMove; ne daugiau kaip 36 ašys) • Didžiausia naudingoji apkrova: 30,5 kg (1,2 m pasiekiamumo) / 20,5 kg (1,45 m pasiekiamumo) • Apsaugos klasė: IP54 standartas; IP67 pasirinktinai (Foundry Plus) • Montavimo galimybės: ant grindų, sienos, lentynos, pakreiptas, apverstas • Suderinamumas su valdikliais: IRC5 (viengubas, dvigubas, kompaktiškas), "OmniCore" (C30, C90XT, V250XT, V400XT) • Ašių diapazonai: • 1 ašis: ±180° • 2 ašis: +136° / -63° (1,2 m) arba +150° / -90° (1,45 m) • 3 ašis: +55° / -235° (1,2 m) arba +65° / -245° (1,45 m) • 4 ašis: ±200° (numatytasis nustatymas), maks. ±190° apsisukimas • 5 ašis: ±115° • 6 ašis: ±400° (pagal nutylėjimą), maks. ±288° apsisukimas • Pakartojamumas: • Padėties pakartojamumas (RP): 0,02 mm (6 kg) / 0,02-0,05 mm (10 kg) • Kelio pakartojamumas (RT): 0,06-0,19 mm • Didžiausias jungties greitis: • 1 ašis: 150-180°/s Hnjdox D E Tnepfx Ab Rjt • 2 ašis: 160-180°/s • 3 ašis: 170-185°/s • 4 ašis: 320-385°/s • 5 ašis: 400°/s • 6 ašis: 460°/s • Riešo sukimo momentas: 4 ir 5 ašis ≈ 8,58 Nm; 6 ašis ≈ 4,91 Nm • Elektra: 200-600 V, 50/60 Hz; maksimalus energijos suvartojimas 0,58 kW • Matmenys: Pagrindas 484 × 648 mm • Aukštis: 1069 mm (1,2 m pasiekiamumo versija) / 1294 mm (1,45 m pasiekiamumo versija) • Darbinė temperatūra: Nuo +5 °C iki +45 °C

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7600-101325, keliamoji galia: 340 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 360 °, garantijos trukmė: 4 mėnesiai, Įranga: dokumentacija / vadovas, Robot with 4-Month Warranty The general overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil Change: Replacement of oils for all six axes. - Battery Replacement: All internal batteries were replaced with new ones. - Mechanical Maintenance: Gears and counterweight were inspected and serviced according to repeatability and weight tests. Hnedpfx Aszdrx Rsb Rot - Electronic Maintenance: Drives, electronic boards, teach pendant, and PC components were serviced. - Polishing and Repainting: The robot was polished and repainted in the original color or in a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Controller: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 rotations Dynamics (max. rotational speed per axis) Axis 1: 75 °/s Axis 2: 60 °/s Axis 3: 60 °/s Axis 4: 100 °/s Axis 5: 100 °/s Axis 6: 160 °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm EQUIPMENT - 6-axis industrial robot with high payload class - Large swiveling range on axis 6 with up to 67 rotations - Precise path control with repeatability under 0.3 mm - High wrist axis speed for rapid movements - Perfectly suited for heavy handling and precision motion sequences

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2011, Pilnai, renovuota suvirinimo robotų sistema, įskaitant: RT 330 robotas pakabintas ant pasukamo strėlės (strėlės ilgis 1500 mm), K 5 valdymas, dujų antgalio jutiklis, arkos siūlės paieška, mechaninis valymas, slėgio stiprintuvas, suvirinimo įranga Fronius TPS 4000 (400 A, impulsinis aparatas), vielos padavimas, degiklis, žarnų paketas, 1 šviesos užuolaida, išorinė start/stop dėžutė, 1 ritminis stalas su H rėmu ir 2 RP/150A sukikliais (keliamoji galia 300 kg), diskų atstumas 2200 mm, sukimosi spindulys 600 mm. 6 mėn. garantija dalims. Hjdpocrtlisfx Ab Ront

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, DMC Polisand 110 RP Wide Belt Sander Year 1998 Lacquer Wide Belt Sanding Machine Installed total power approx. 23 kW Hjdpfx Ajv Ivuueb Rjnt Sanding width 1100 mm Workpiece thickness up to approx. 170 mm Motorized height adjustment with digital readout Vacuum conveyor belt, F.LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: grooved rubber sanding roller with fan 8.8 kW Unit 2: sanding pad with fan, 15 kW 380 V / 50 Hz Weight 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Būklė: naujas, Working width: 4000 mm Working height: 2600 mm Number of pressing cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-sided abutment for width pressing, lower abutment in two levels. Vertical press cylinders on special pressure beams with single-hand rapid adjustment and counterbalancing, height adjustable in 50 mm increments, long sliding carriages guarantee the long-term absorption of high pressing forces. Quick, smooth width adjustment via ball-bearing guided trolley with central locking, fixation in 50 mm increments. Upper horizontal pressing cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal pressing cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 pcs. vertical press cylinders d = 50 mm, stroke 120 mm, double-acting, with counterbalancing and single-hand quick adjustment; 2 pcs. horizontal press cylinders d = 40 mm, stroke 120 mm, double-acting, with counterbalancing; 2 manual control valves, manometer, 1 pressure regulator valve from 20 to 125 bar (corresponds to 400 to 2400 kg pressing force vertically), with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working area: 4000 mm x 2600 mm (length x height) Required floor space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with double-acting press cylinder, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Lateral pressure device complete with double-acting press cylinder, weight compensation, pressure hose and shut-off valve; weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for lateral pressure device, pressure regulation range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on 3rd vertical cylinder Article ,00 pcs Shut-off valve on upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve at 1st vertical cylinder Article ,00 pcs Basic equipment for counter-profile Required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangular studio window press device consisting of locking device for vertical pressure beam and 3 attachable, side-guided pendulum pressure plates Article ,00 pcs Hodou Uvalopfx Ab Ront Double pendulum pressure plate for pointed windows (triangle) ----- Total price in above configuration ex works: On request! -----