„ProfiCenter“ (CP02)

ROMER CP-02

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton Isdpsfz U Nuefx Aggetn • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Būklė: naudotas, Gamybos metai: 2008, Technical details: Iodpfx Aovvtpxsggstn Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol Isdjfz U Saepfx Aggetn • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge Itodpfx Aefz U Swsggen • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2002, būklė: nepatikrintas (naudotas), Robot No control panel + connecting cables Itodpfegu U Itjx Aggjn Used, untested robot. No teach pendant. Not tested.

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free Itsdpfx Agofz Dknsgsn

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Ijdpjfz U Rrofx Aggetn Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. Isdpfjfz U S Eex Aggetn - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h Iedpfjfz U Rcex Aggetn • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, naudojamo bako talpa: 25 000 l, AV-12176 – Vertikal, isoleret tank 25.000 L Udvendige mål: Diameter Ø 2550/2700 mm. Total højde 7000 mm. Vertikal, isoleret tank med kapacitet på 25.000 L Isoleret med 50 mm mineraluld, beklædt med rustfri trapezplader. Konisk top med ventilation/CIP-tilslutning. Konisk bund med 3" udløb. Itsdouwdhljpfx Aggon Mandørluge nederst på cylinderen. Kraftig topmonteret omrører. Materiale: AISI 904L rustfrit stål.