Rėmo presas
S&S RP 2000

Sąlyga

Naudotas

Vieta

Vokietija

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Rėmo presas

Gamintojas:: S&S

Modelis:: RP 2000

Sąlyga:: naudotas

Kaina ir vieta

Vieta:: Deutschland

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A17810441

Nuorodos Nr.:: 1305-6792

Naujinta paskutinį kartą:: Data 2025.05.19

Aprašymas

Working width: 4000 mm
Working height: 2600 mm
Number of pressing cylinders: 6 pcs.
Dimensions (L/W/H): 5300 x 1250 x 3330 mm
S&S Frame Press Type RP 2000,
-----
CE version
Robust frame construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid.
Continuous left-sided abutment for width pressing, lower abutment in two levels.
Vertical press cylinders on special pressure beams with single-hand rapid adjustment and counterbalancing, height adjustable in 50 mm increments, long sliding carriages guarantee the long-term absorption of high pressing forces.
Quick, smooth width adjustment via ball-bearing guided trolley with central locking, fixation in 50 mm increments.
Upper horizontal pressing cylinder infinitely height-adjustable and equipped with weight compensation.
Lower horizontal pressing cylinder with centering bores for both abutment levels, with weight compensation.
Abutment and pressure plate depth: 100 mm
Pressure plate and support width: 130 mm
Machine is electro-hydraulically controlled, with 2 pcs. vertical press cylinders d = 50 mm, stroke 120 mm, double-acting, with counterbalancing and single-hand quick adjustment; 2 pcs. horizontal press cylinders d = 40 mm, stroke 120 mm, double-acting, with counterbalancing; 2 manual control valves, manometer, 1 pressure regulator valve from 20 to 125 bar (corresponds to 400 to 2400 kg pressing force vertically), with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage.
Complete with electrical connection.
Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey

Working area: 4000 mm x 2600 mm (length x height)
Required floor space: 5300 x 1250 x 3330 mm (L x W x H)

Machine includes the following options:
-----

Article ,00 pcs
Central pressure beam with double-acting press cylinder, weight compensation, pressure hose and shut-off valve up to 2600 mm high

Article ,00 pcs
Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing cross-bar windows)

Article ,00 pcs
Lateral pressure device complete with double-acting press cylinder, weight compensation, pressure hose and shut-off valve; weight compensation on lower horizontal cylinder omitted

Article ,00 pcs
Individual pressure regulation for lateral pressure device, pressure regulation range up to max. 100 bar (for pressing cross-bar windows)

Article ,00 pcs
Shut-off valve on 3rd vertical cylinder

Article ,00 pcs
Shut-off valve on upper horizontal cylinder
Duodpfxsu Uvalj Ab Sel

Article ,00 pcs
Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve at 1st vertical cylinder

Article ,00 pcs
Basic equipment for counter-profile
Required height increases by 100 mm

Article
All pressure plates and abutments covered with plastic

Article ,00 pcs
Triangular studio window press device consisting of locking device for vertical pressure beam and 3 attachable, side-guided pendulum pressure plates

Article ,00 pcs
Double pendulum pressure plate for pointed windows (triangle)

-----

Total price in above configuration ex works: On request!
-----

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Dokumentai

17810441-01.pdf

Tiekėjas

Paskutinį kartą prisijungęs: Vakar

Registruota nuo: 2002

110 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 7364 ... skelbimai

+49 7361 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Aalen

1 175 km

Rėmas paspauskite
S&SRP 2000

Skambinti

Sąlyga: naujas, Working width: 3500 mm Working height: 2300 mm Number of pressing cylinders: 4 pcs. S&S Frame Press Type RP 2000 – CE version Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment includes intermediate pressure bars, slanted window device, counter profiles for single-part production, and much more! Request our complete price list! Description: Robust welded frame construction made from thick-walled special profiles, sliding carriages, and pressure bars with 50 mm hole grid. Duodpfx Abed Ih H Ss Sjl Continuous stop on the left side for width pressing, lower stop adjustable in 2 levels. Vertical pressing cylinders mounted on special pressure bar, with single-handed quick adjustment with weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure long-term durability for high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, locked in 50 mm hole grid. Upper horizontal pressing cylinder is continuously height-adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for both stop levels, without weight compensation. Stop and pressure plate depth: 100 mm. Pressure plate and support width: 130 mm. Machine is electro-hydraulically controlled, equipped with 2 vertical single-acting pressure cylinders (d = 50 mm, stroke 120 mm) with weight compensation and one-handed quick adjustment; 2 horizontal double-acting pressure cylinders (d = 40 mm, stroke 120 mm) with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve adjustable from 20 to 100 bar (corresponds to 400 to 2000 kg vertical pressing force); powered by a 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Completely wired for electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data as provided by the manufacturer, subject to change. Images may show optional equipment!)

Peržiūrėti detales

Mažas skelbimas

Šepetys, struktūrizavimo mašina - Italy Master 400.2 ALU

Egenhofen

1 164 km

Šepetys, struktūrizavimo mašina
- ItalyMaster 400.2 ALU

Skambinti

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Duodpfx Abji Hpk Uj Sol Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Peržiūrėti detales

Mažas skelbimas

Langų sistema WEINIG Unicontrol 6 NC-Spindeln

Oberkochen

1 179 km

Langų sistema
WEINIGUnicontrol 6 NC-Spindeln

Skambinti

Sąlyga: naudotas, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- Dodpfxevu Hghs Ab Soul > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Peržiūrėti detales

Mažas skelbimas

Velen

1 176 km

Įrankių vežimėlis
WMTWMT 145

Skambinti

Sąlyga: naujas, Dimensions (L x W x H): 1610 x 460 x 920 mm Weight: 93.5 kg Number of drawers: 20 pcs Workshop trolley with 20 drawers and 40 mm solid wood worktop Fixed ball bearing slides (double bearing), anti-slip mat in every compartment, Duodpju Iml Uefx Ab Ssl thick rubber top mat, central locking system, 6 heavy-duty wheels (125 mm diameter), of which 4 are swivel castors with brakes, central locking for all drawers. Anti-slip mat in every compartment. Sturdy, double ball bearing slides for the drawers. All drawers can be fully (100%) opened.

Peržiūrėti detales

Mažas skelbimas

Nattheim

1 177 km

Kampinė sistema
OkomaUF 3 S

Skambinti

Mažas skelbimas

Keturios šoninės obliavimo staklės WEINIG Profimat 23 Fenster

Oberkochen

1 179 km

Keturios šoninės obliavimo staklės
WEINIGProfimat 23 Fenster

Skambinti

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with glazing bead cutting unit, alternatively usable as a grooving spindle ATS control and program control ----- Machine is currently being overhauled and function-tested Technical Data Summary (additional accessories, if included, upon request) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Dusdpfx Absu Su Hue Sjl Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch on the control panel > Spindles with mechanical digital display Option: Used planer heads available (technical data as per manufacturer – no guarantee!)

Peržiūrėti detales

Mažas skelbimas

"UniControl 12 WEINIG UniControl 12 - UniTec + UniVar

Trondheim

1 187 km

"UniControl 12
WEINIGUniControl 12 - UniTec + UniVar

25 000 €

EXW fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza - Profilio freza Dodpfxsmgc I Ne Ab Ssul Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Peržiūrėti detales

Mažas skelbimas

"Weinig UNICONTROL 10" langų gamybos linija Weinig Unicontrol 10

Tauberbischofsheim

1 143 km

"Weinig UNICONTROL 10" langų gamybos linija
WeinigUnicontrol 10

Skambinti

Sąlyga: naudotas, Weinig Unicontrol 10 (UC 10) angle processing system for the manufacturing of windows, components, and doors. Suitable for frame, series, or individual part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units: 1. Cross-cut saw, NC-axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC-axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC-axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Horizontal profiling unit from above, 3 kW 6. Profiling spindle 2, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC-axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profiling unit, horizontal from below, NC-axis 3 kW - Double part package - Counter-milling package with counter-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled stop for length Dsdpev Ag Tdjfx Ab Soul - Studio window setup - Unit for edge rounding from below with cross-cut saw - Glazing bar support rail - Including extraction pipe system - Including Oertli tool set - Further technical data and tool drawings available upon request.

Peržiūrėti detales

Mažas skelbimas

Herning

942 km

WINDOWS
SCM GROUPWINDOR 60

15 000 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Dedpfx Abjt R T Hcj Sjul Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Peržiūrėti detales

Mažas skelbimas

Linija durų staktoms (rėmams) - CNC MASTERWOOD + AMS Multitec + Teknomat 3000

Roreto

1 633 km

Linija durų staktoms (rėmams) - CNC
MASTERWOOD + AMSMultitec + Teknomat 3000

Skambinti

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor Dodpfxeqwyclj Ab Ssul X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Peržiūrėti detales

Reklamuokite čia