Gręžimo Šlifavimo Staklės pirkti naudotą (47 906)

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Fedpjvnv Tqofx Ac Iegc Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Stanko 3A151 Cylindrical Grinding Machine For sale is a high-quality cylindrical grinding machine, model Stanko 3A151. This machine is suitable for precision external grinding of cylindrical workpieces as well as flat tapers, making it ideal for use in workshops, toolmaking, series production, and maintenance departments. Technical Specifications - Max. workpiece diameter: 200 mm - Max. workpiece length: 700 mm - Max. grinding length: 630 mm - Center height: 110 mm - Max. workpiece weight: 30 kg - Table travel: 650 mm - Infinitely variable table speed: 100–6000 mm/min - Grinding wheel diameter: 450–600 mm - Max. grinding wheel width: 63 mm - Grinding spindle speed: 1112 / 1272 rpm - Workpiece spindle speed: stepless 63–400 rpm - Grinding head travel: 200 mm - Main drive (grinding spindle): 7.5 kW - Number of electric motors: 7 - Machine dimensions (L × W × H): 3100 × 2100 × 1500 mm - Machine weight: approx. 4,200 kg Fgjdpfozcg H Ijx Ac Isc Equipment and Features: - Hydraulic table drive - Automatic and manual cross-feed - Rapid traverse for the grinding head - Hydraulic tailstock quill - Coolant system - Lubrication system - Magnetic separator - Suitable for longitudinal and plunge grinding - High precision and heavy-duty industrial construction Condition The machine is in technically flawless condition. It is immediately ready for operation and impresses with its robust design and high grinding accuracy. Inspection and test run possible by arrangement.

Būklė: nepatikrintas (naudotas), Gamybos metai: 2013, Gręžimo skersmuo, mm Horizontalių gręžimo galvučių skaičius, vnt. Vertikalių gręžimo galvučių skaičius, vnt. 2 vnt. Götzinger gręžimo ir frezavimo centras ----- Parduodama pagal kliento užsakymą! Fjdpfx Aov N N Spec Isgc 2 identiškos mašinos: Viena mašina naudota „kairiųjų“ detalių apdirbimui, kita – „dešiniųjų“ detalių apdirbimui. Mašinas galima naudoti ir atskirai. Mašinos buvo valdomos per langų gamybos programinę įrangą, bet galima valdyti ir per pačią mašinos programinę įrangą. Abi mašinos identiškai komplektuotos: - Gręžimo agregatas kairėje ir dešinėje galiniams gręžimams. - 3 agregatai gręžimui ir frezavimui išilginiam apdirbimui. - Dalys įdedamos 1 kartą, po to agregatų laikiklis juda prie skirtingų apdirbimo vietų. Mašinos užstatymo ilgis apie 6 m. Galimas pavienis pardavimas: Kaina už vieną mašiną – 10.000 eurų Daugiau informacijos – žr. pridėtus PDF dokumentus.

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: Fodpjv D Rg Djfx Ac Ijgc ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Būklė: paruoštas naudoti (naudotas), Number of drilling motors: 1 unit Corner bearing drilling: 1=yes, 0=no – 1 yes Olive drilling: 1=yes, 0=no – 1 yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station offers extensive drilling technology for little money, especially designed for craftsmen. It is a complete station for drilling corner bearings and olives, equipped with all essential features such as two clamping cylinders, drilling depth sensing, efficient extraction, stop systems for both corner bearing and olive drilling, drill head with quick-change chuck, adjustable feed speed, and automatic program control. This means optimal technology for perfect results: just one machine with a single drilling unit and a single drill head for two operations. The system: - Base frame as work wall for sashes and frames up to 100 mm Fgodpfovu Hgzsx Ac Ijc - Centrally positioned drilling unit, height-adjustable manually via threaded spindle - Drill hole position and depth are preset for the given fitting type, and are adjustable for different models via a stop system - Drilling feed speed can be variably adjusted via throttle valve - Direct extraction system - Electro-pneumatic control system with automatic program sequence for: workpiece clamping – drill motor on – drilling unit forward – drilling – drilling unit back – drill motor off – release workpiece clamp - Fixed stop systems Standard equipment / Technical data: Robust base frame as work wall, precise support made from abrasion-resistant and dimensionally stable plastic, for sashes and frames up to 100 mm thick, corner bearing and olive drilling in a single machine and with one drilling unit, easy and convenient vertical operation, simple handling, no templates required, minimal time investment for safe workpiece positioning, guarantees for precise and accurate holes, two clamping cylinders for secure fixation of sash or frame, adjustable for different wood thicknesses, side stop in the rebate for corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for determining drilling height when switching from corner bearing to olive, automatic drill depth sensing for corner bearings and olives, drilling unit with quick-change chuck for different tools for corner bearings and olives, tool changes in seconds, automatic program sequence, clean working environment thanks to efficient extraction, compact size and mobile due to steering/brake castors. Electrical equipment in accordance with VDE standards. Electrical connection: 0.55 kW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4–8 bar Extraction port: 1 x 100 mm diameter Extraction speed: 25 m/sec. Space requirements: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Finish: RAL 7030 Stone grey with RAL 1018 Zinc yellow 1 drill set with 1 drill bit 25 mm and 2 drill bits 10 mm plus 1 additional drill bit with 34 mm diameter (Technical data as provided by manufacturer – subject to change without notice!)

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm Fgodpfevu Hgbsx Ac Ioc - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Fgedpfxst Tqy Ee Ac Isc Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, SKODA W250H plokščių gręžimo-frezavimo staklės su S80B rotaciniu stalu 4000x3550 mm Techniniai duomenys: Judėjimo eiga X/Y/Z: 15000/5150/2000 mm Padavimo eiga pagal Z ašį: 1600 mm Didžiausias veleno greitis: 630 aps./min. Mažiausias veleno greitis: 8 aps./min. Veleno skersmuo: 250 mm Staklės aprūpintos S80B 4000x3550 mm rotaciniu stalu, stalo apkrova 80 000 kg. Gamybos metai: 1997 Fodpey Sh Dnsfx Ac Isgc Modernizuota 2007 m. CNC valdiklis: Sinumerik 840D Trys frezavimo galvutės Įrenginys pilnai veikiantis, tačiau išardytas. Turime vaizdo įrašą, kuriame parodyta staklės iki išardymo.

Gamybos metai: 1999, būklė: labai geros būklės (naudotas), 21 drilling spindles Spindle pitch 32 mm Pneumatic clamps Capability for vertical, horizontal, and 45° angle drilling Adjustable drilling depth from 0 to 80 mm Fodpfeh Txmtjx Ac Ijgc

Būklė: geras (naudotas), spindle diameter 105 mm X-axis travel 600 mm y-axis travel 400 mm spindle throat 475 mm stepless spindle speed adjustment: 70-2000 rpm table surface 800 x 400 mm automatic spindle feed machine weight approx. 2.5 t Fgsdpfjuldt Nox Ac Ijc

Būklė: naudotas, Technical Details: Grinding spindle - rotatable: yes Spindle speeds: 2850 rpm Worktable: 50 x 134 x 44 mm Table travel: X= 265 mm Table travel: Y= 165 mm Grinding wheel dimensions: bore Ø 20 mm Voltage: 380 V / Hz Machine weight approx.: 113 kg Machine dimensions approx. LxWxH: 0.63 x 0.56 x 0.64 m This is a benchtop unit. Fgjdpfx Aceu Ng N Ae Isc Grinding machine for twist drill point angle 30° / 40° Grinding wheel bore Ø 20 mm Manual Z-axis travel = 230 mm Spindle head swivels 360° via radial scale Table with clamping surface LxW: 270 x 100 mm for clearance angles 40° and 90°, 3x clamping fixtures, 14 mm V-block, as well as a test device with 12 mm V-block and 90 mm adjustable magnifier Column rotates 360° Grinding guard 2x 220V sockets in good condition.

Būklė: naudotas, Techninės detalės: Fgodjw Th Nlepfx Ac Iec Velenų skaičius: 1000 Gręžimo galia pliene (skersmuo): 32 mm Gręžimo eiga: 200 mm Apsisukimų diapazonas: 63 - 1000 aps./min Gręžimo galia ketuje: 50 mm Gręžimo veleno Morse kūgis: MK4 Veleno išsikišimas: 315 mm Velenų atstumas: 475 mm Gręžimo stočių skaičius: 3 Veleno galvutės pastūmos eiga: 280 mm Padavimas: 0,08 - 1,25 mm/aps. (9 žingsniai) Atstumas tarp veleno ir stalo: 710 mm Stalo paviršius: 450 x 560 mm Bendras galios poreikis: 12,4 kW Mašinos svoris: apie 3,1 t Mašinos matmenys (Ilg.xPlot.xAukšt.): apie 2,15 x 1,40 x 2,65 m Ankstesnis savininkas iš nuoseklios gręžimo staklių pašalino veleną su dėže!

Būklė: naudotas, Techninės detalės: Šlifavimo skersmuo: 600 mm Šlifavimo ilgis: 2600 mm Centrų aukštis: 180 mm Ruoinio skersmuo – maks.: 360 mm Sūkių skersmuo: 600 mm Šlifavimo disko skersmuo: 600 x 305 x 160 mm Bendras galios poreikis: 17,6 kW Aušinimo skysčio įranga: 90 l/min Fgjdpjw Rktbjfx Ac Isc Ruoinio verpstės greitis: 12,5–250 aps./min Begalinė pastūma: 0,05 – 6,0 mm Apytikslis staklių svoris: 8,2 t Apytikriai matmenys (IxPxA): 6,4 x 2,2 x 1,9 m Finibalanz balansavimo įrenginys Griebtuvas su cilindro paklaidos korekcija, skaitmeninis ekranas X=0,001 – Z=0,01 Spindulio įrenginys 2–10 mm

Būklė: naudotas, Gamybos metai: 1971, Techniniai duomenys: Didžiausias išorinis skersmuo tekinant priekinio paviršiaus: apie Ø 900 mm Apsisukimų dažnis: veleno: 12,5 - 00 / 24 žingsniai aps./min Apsisukimų dažnis: plokštumos disko: 8 - 190 / 12 žingsnių aps./min Padavimo pakopos: plokštumos disko: 0,03 - 3 / žingsnis Greitas padavimas: visoms judėjimo kryptims: 2000 / 4000 m/min Įrankio tvirtinimas: darbinio veleno: ISO 50 / SK50 Darbo stalo tvirtinimo plotas: 700 x 800 mm Stalas pasukamas: 360° Gręžimo stalo poslinkis skersai: 800 mm Maksimali stalo apkrova: 1500 kg Bendra elektros galia: apie 11,0 kW Staklių svoris apie: 7800 kg Staklių matmenys (IxPxA): 3,0 x 2,0 x 2,6 m Valdymo spintos matmenys: 1800 x 400 x 1950 mm Plokštumos disko Ø: 420 mm Plokštumos disko poslinkis: 180 mm Didžiausias tekinimo Ø apie: 900 mm Stovo išilginis poslinkis: 700 mm Veleno galvos vertikalus poslinkis: 700 mm Padavimo pavara stovo, veleno galvos ir tvirtinimo stalo: - Veleno režime: 0,20 - 10 mm/aps su 34 pakopomis - Plokštumos disko režime: 0,16 - 16 mm/aps su pakopomis Komplektacija: Optinis precizinis matavimo prietaisas / ašių X/Y/Z/B stalo matavimo sistema Fodpfx Aceu Idtpe Iogc Hidraulinė sistema Staklių kojos / pagrindo plokštės Valdymo pultas su laikikliu

Būklė: naudotas, Gamybos metai: 1982, Techninės detalės: Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Aukštis iki centrų: 225 mm Maks. šlifavimo ilgis: 1600 mm Atstumas tarp centrų: 1540 mm Veleno skylė: 38 mm Fgsdpew Rktzefx Ac Iec Maks. pasukamumas: 90° Apytikslis staklių svoris: 6,0 t Staklių matmenys (IxPxA): apie 4,4 x 2,45 x 2,3 m Staklės su CNC paketu ir DFU jungtimi Daugiarėžiminė matavimo galvutė pertrūkių paviršiui Palečių laikiklis su cilindriškumo klaidos korekcija Finibalanz balansavimo įrenginys

Būklė: naudotas, Technical specifications: Drilling capacity in steel (diameter): 32 mm Arm reach: 1250 mm Maximum workpiece height: – mm Distance from column to spindle center: 1250 mm Horizontal travel of drilling head: 980 mm Vertical adjustment of arm: 800 mm Distance table to bottom of spindle: 2.05 x 9.2 x 2.85 mm Spindle taper: MK4 Drill spindle stroke: 280 mm Infinitely variable speed range: 28–1,195 rpm (3 steps) Arm swivel range: 90 degrees Feed rates: 0.1/0.2/0.3/0.4/0.8/1.2 mm/rev (6 steps) Fgodpfx Acowid Auo Isc Column diameter: 300 mm Base plate clamping area: 1,370 x 750 mm Approx. machine weight: – t Machine dimensions (L x W x H): 2.05 x 9.2 x 2.85 m Coolant system with feed Table with clamping surface 1,370 mm x 750 mm Including drill cube *

Būklė: naudotas, Gamybos metai: 1996, Technical details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm CNC control: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding. - With the plunge-cut method, the maximum plunge length is 160 mm. Fjdpsu Ngyzefx Ac Iegc - Automatic workpiece discharge via rail (the function/operation of which is not known to WMW AG) - Working grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, infeed angle right 0-6° and left 0-2°; wheel size 280x160 mm - Automatic grinding wheel balancing system Condition: Reference run not possible Machine does not operate in automatic mode Accessories: various grinding and regulating wheels available on request

Būklė: naudotas, Gamybos metai: 1998, Technical details: Drilling capacity in steel (diameter): 15 mm Drill stroke: 100 mm Tapping capacity: M16 Number of drilling stations: 3 Drill spindle taper: 3x MK2 Fodpfsu Idutex Ac Iegc Spindle reach: 220 mm Distance between spindles: 335 mm Spindle head adjustment (vertical): 290 mm manual Feed: manual mm/rev Spindle speeds: 220-1600 / 400-3200 / 800-6400 rpm Spindle-to-table distance min./max.: 235/525 mm Table surface: 1270 x 315 mm Table adjustment: fixed Total power requirement: not specified kW Approximate machine weight: 0.72 t Approximate machine dimensions (LxWxH): 1.4 x 0.8 x 2.25 m Including coolant system Operation via hand and foot control The drill spindles are equipped as follows: 1x drill chuck 13 mm 2x quick-action chucks 10 mm

Būklė: naudotas, Gamybos metai: 1978, Technical details: Drilling capacity in steel (diameter): 100 mm Throat depth: 400 - 2100 mm Fgjdeu Id Awopfx Ac Ioc Vertical travel of arm: 100 mm Spindle taper: MK 50 Drilling depth: 415 mm Spindle stroke: 400 mm (scale) Column rotatable: 360° Column diameter: Ø 500 mm Distance head - clamping surface (min./max.): 400 / 1,800 mm Spindle speed range: 12.5 – 1,600 rpm / 15 steps Feed rate: 0.063 – 2.5 mm/rev / 15 steps Table clamping area (L x W): 2,000 x 950 mm Total power requirement: approx. 35 kW Machine weight approx.: w/o cube = 8.0 t Machine dimensions (LxWxH): 3.40 x 1.16 x 3.51 m Additional information: - Horizontal travel of drilling spindle: 1,700 mm Equipment: - incl. drilling cube (horizontal surface: 1,000 x 1,000 x 500 mm, center bore Ø 35 mm; 6 T-slots), (vertical surface: 1,000 x 500 mm, 3 T-slots) - Control panel - Coolant system

Būklė: naudotas, Gamybos metai: 1959, Techniniai duomenys: Veleno skersmuo: 160 mm Gręžimo gylis: 1400 mm X eiga: 3600 mm Y eiga: 3000 mm Z eiga: 1400 mm U ašis: 475 mm Įrankio tvirtinimas: SK 80 Fgsdpsyzftxjfx Ac Ioc Pagrindinio veleno apsukos: 1430 aps./min Bendras galios poreikis: 11 kW Apytikslis svoris: 32 t

Būklė: naudotas, Technical details: Drilling capacity in steel (diameter): 30 mm Drilling stroke: 180 mm Drill spindle Morse taper: 4 x MT 3 Spindle outreach: 310 mm Spindle distance: 490 mm Number of drilling stations: 4 Spindle head adjustment: 300 mm (manual) Feed: 0.08 - 0.64 mm/rev, 6 steps Spindle speed: 50 - 1,215 rpm, 19 steps Distance spindle/table, max./min.: 500 / 200 mm Table surface: 1,820 x 395 mm Table adjustment, height: 300 mm (manual) Total power requirement: 4x 1.5 kW (6.0 kW) Machine weight approx.: 2.8 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 2.75 m Further technical information: - Centre distance between spindles: 490 mm - Thread cutting on drilling columns 3 and 4 with automatic reversing - All drilling spindles operate with right and left rotation Fgedpfx Asu Idu Hec Isc - Spindle gearbox and variator - Equipped with coolant system

Būklė: naudotas, Gamybos metai: 1981, Techninės detalės: Šlifavimo skersmuo: 240 mm Šlifavimo ilgis: 700 mm Centrų aukštis: 125 mm Stalo ilgis: 1525 mm (pasukamas) Atstumas tarp šlifavimo veleno ir stalo min./maks.: 225/410 mm Šlifavimo disko apsisukimų diapazonas: 1590 aps./min Šlifavimo disko diametras (naujas diskas): 600 mm Šlifavimo disko diametras (nudėvėtas diskas): 450 mm Pjovimo greitis: 50 m/s Bendra galia: 13 kW Mašinos svoris: apie 5,5 t Reikalinga erdvė (PxPxA): 2,8 x 2,2 x 1,8 m PUSIAU AUTOMATINĖ APVALI ŠLIFAVIMO STAKLĖ Papildoma informacija: - Šlifavimo veleno atramos poslinkis: 185 mm - Šlifavimo veleno atramos padavimas: 0,001-0,05 mm/min be laipsniavimo - Ruošinio veleno sukimosi greitis: 50-500 aps./min be laipsniavimo Mašina su įranga: - Pinolis su hidrauliniu atitraukimu - Aušinimo sistema - Profilio formavimo įranga - Šlifavimo disko balansavimo įranga - Šlifavimo veleno atramos skersinio padavimo įrenginys Fodpfx Acju Ng Ave Ijgc - Hidraulinis šlifavimo stalo reguliavimas, viršutinis stalas pasukamas ii.D.

Būklė: naudotas, Techniniai duomenys: Gręžimo našumas pliene (skersmuo): 32 mm Išsikišimas: 1000 mm Maks. ruošinio aukštis: - mm Kolonos skersmuo: 300 mm Fgedpfx Acsv S Ay Ss Ijc Gręžimo vežimo horizontalus poslinkis: 400 mm Atstumas stalas – veleno apatinis kraštas: 200 mm Veleno kūgis: MK 4 Gręžimo veleno eiga: 200 mm Sukimosi dažnių diapazonas - laipsniškai: 18 pakopų, 14–710 aps./min Strėlės pasukimo diapazonas: 360 laipsnių Padavimas: 0,09/0,12/0,25/0,5 mm/aps. Apytikslis staklių svoris: 2,0 t Apytiksliai įrenginio matmenys (IxPxA): 2,4 x 0,9 x 2,4 m Transportuojama! Valdymas per mygtuką 4 vnt. reguliuojamų atramų D=16x30 mm, reguliuojamas aukštis 60 mm su reketiniu raktu

Būklė: naudotas, Technical specifications: Number of spindles: 4 Drilling capacity in steel (diameter): 2-16 mm Drilling stroke: 140 mm Drill spindle Morse taper: MT 3 Spindle overhang: 280 mm Spindle distance: 455 mm Spindle head adjustment: 250 mm via hand crank Fedsu Idugspfx Ac Iegc Feed rate: 0.08 - 0.12 - 0.20 - 0.31 mm/rev, 4 steps Feed: automatic + manual Spindle speed: 180 - 2000 rpm, 8 steps Distance spindle/table: min. 3x 140 mm and 1x 260 mm Distance spindle/table: max. 3x 700 mm and 1x 820 mm Table size: 1800 x 350 mm Table adjustment: 300 mm via hand crank Total power requirement: 6.3 kW Machine weight approx.: 2.4 t Machine dimensions (LxWxH) approx.: 2.1 x 0.9 x 2.2 m Application: Drilling, countersinking, reaming, and tapping. Each drill spindle is equipped with its own drive motor. Equipment: Foot pedal/control Hand crank

Būklė: naudotas, Technical Details: Spindle diameter: 130 mm Drilling depth: 1,380 mm X-travel: 2,500 mm Y-travel: 1,600 mm Z-travel: 380 mm W-axis: 900 mm spindle feed U-axis: 320 mm facing slide feed Control system: on request Tool holder: ISO SK50 Speed – facing slide: 4.5–180 rpm Drive spindle speed: 4.5–900 rpm Feed – x/y: 5–2,000 Total power requirement: approx. 40 kW Machine weight approx.: < 35 t plus auxiliary equipment The machine can be offered in four different sales options. Please choose! 1. The machine is in as-new mechanical condition, as it stands. 2. The machine as it stands, including plate table 4,000 x 2,000 x 300 mm = Stock No. 1101081 Fgodpfx Acsvr S Uls Iec 3. The machine rewired, with new control cabinet, digital readout, 4-axis, Siemens AC drives, Siemens axis motors (50A/31Nm) with 12 month warranty on all new parts. 4. Additional accessories can also be optionally offered, e.g. coolant system, chip conveyor, enclosure, etc. Please contact us to discuss these options.