Radialinio gręžimo staklės

COLLET & ENGELHARD

Sąlyga: naudotas, Gamybos metai: 1977, Techninės detalės: Šlifavimo skersmuo: 125 mm Eiga: 500 mm Išsikišimas: - mm Šlifavimo veleno apsukos: 26–1200 (12 žingsnių) aps./min. Mažiausias šlifavimo skersmuo: 30 mm Didžiausias šlifavimo skersmuo: 165 mm Stalo poslinkis (didž.): 800/150 mm Stalo tvirtinimo paviršius: 500 x 1000 cm Bendras galios poreikis: 4,22 kW Apytikslis staklių svoris: 0,15 t Staklių matmenys (I x P x A): apie 1,30 x 1,20 x 2,70 m Stalas gali judėti išilginėje ir skersinėje kryptimis Rankinis tepimas su aušinimu Hjdpow Rv Tasfx Af Ieng Staklės skirtos šlifavimui (honavimui) Galima greita svirtinė judėjimo eiga tarp dviejų reguliuojamų galinių padėčių

Sąlyga: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine Hedsirax Ujpfx Af Ijng - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Sąlyga: naujas, Gamybos metai: 2025, - Horizontal capacity 500 kg - Vertical capacity 250 kg Hnsdpegg Rb Tofx Af Isg - Table size 560 mm - Door left 170 mm - Electrically tiltable - Foot pedal - Documentation - 230V

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. Hnodpfxspugwio Af Ijg The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (parodų įrenginys), Welding Positioner KT 50 Horizontal load capacity: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, Width: 650 mm Stepless tilt adjustment via geared crank motor: 0–90° Hnedpsd A Etysfx Af Iog Speed: 1.7–15 rpm Including foot remote control

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Hodpfxsh Ek Dao Af Iong Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: naudotas, Diameter 5-20 mm Length 10-200 mm Hedpfji Eg Rtjx Af Ieng Mount: Morse taper Various drilling, milling, and turning tools as well as other accessories. Drill bits, taps, and milling cutters: 30 EUR/kg Other accessories: 10 EUR/kg

Gamybos metai: 1990, Sąlyga: labai geros būklės (naudotas), used T-slot clamping angle plate Technical data: Dimensions Height: 1120 mm Width: 320 mm Slot width: 20 mm with - 7 horizontal T-slots Hodpogwxmxsfx Af Iong used, in good condition

Sąlyga: beveik kaip naujas (parodų įrenginys), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Hnjdpfxspgmufj Af Iog Power: 2.2 / 3.8 kW 400V/50Hz Weight: 110 kg Technical data and dimensions: subject to change/errors excepted

Sąlyga: naujas, - Horizontal capacity 350 kg - Vertical load capacity 120 kg - Table size 330 mm - Foot pedal - Documentation - 230V Hedpegg N Sgefx Af Isng