Cilindrinio šlifavimo staklės

STANKO 3A151

Būklė: naudotas, Gamybos metai: 1983, Grinding length: 8,400 mm Grinding width: 1,450 mm Workpiece height: 1,250 mm Clamping surface: 8,000 x 1,250 mm Table height above floor: 920 mm Distance between columns: 1,470 mm Max. workpiece weight: 59,700 kg Machine weight approx.: 59.7 t Space requirement approx.: 22 x 5 x 5 m Adjustment ranges: - Crossbeam, vertical: 1,250 mm - Grinding support, horizontal: 3,100 mm Todpfx Asvr Hgvea Doa Adjustment speeds: - Machine table (X-axis) Infinitely variable: 1–45 m/min Table creep feed speed: 5 m/min - Grinding support, horizontal (Y-axis) Rapid traverse: 3,000 mm/min Feed, stepwise: 0.001–0.099 mm Feed, continuous: 100–3,000 mm/min Creep feed: 18 + 1 mm/min Tip infeed: 0.001–0.019 mm - Crossbeam (W-axis) Rapid traverse: 410 mm/min Table drive: - Oil gearbox, type Iv4 - Cylinder Ø: 185 mm - Piston rod Ø: 130 mm - Drive motor: 22 kW

Būklė: geras (naudotas), Gamybos metai: 1998, mašinos/transporto priemonės numeris: 0518018, Offer 24600 Technical Data: - Suitable for welding steel, aluminium, special alloys, CrNi, etc. - Welding current: 450 A at 60% duty cycle 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - Water cooling unit FRONIUS - Separate wire feed unit - Interconnection package between machine and wire feeder: 14 m - 4-roller wire feed, infinitely adjustable - MIG/MAG torch package, water-cooled, approx.: 4 m - Earth cable - Pressure regulator - Mobile undercarriage Tjdpfx Asvncfmoa Dja - Connection: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Būklė: labai geros būklės (naudotas), Motorized 3x3 welding column with movement control via pendant station. Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch, flux hopper, and Lincoln NA-3N amperage and voltage control panel. Submerged arc duty cycle: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Tjdpfx Aou Afttsa Doa Input voltage: 230/460 V Input current: 193/96.5 A Input frequency: 60 Hz Input phase: 3 Input power: 230/460/3/60 Mode icon: CC/CV Output range: 150–1300A DC, 16–46V Polarity: DC Rated output: 1000A / 44V / 100%

Būklė: labai geros būklės (naudotas), Ruošinio skersmuo: 10 - 250 mm Srieginio ilgio: 900 mm Srieginio žingsnis: 0,3 - 100 mm Veleno sūkiai: 72 / 1700 - 2540 aps./min. Užpakalinis nušlifavimas: 0,03 - 8 mm Maks. įtvirtinimo ilgis: 1190 mm Modulis - maks.: 10 Ruošinio sūkiai: 0,4 - 160 aps./min. Bendras galios poreikis: 13 kW Staklių svoris apie: 7,4 t Užimama vieta apie: 4,5 x 2,0 x 2,1 m Tedpsyb S Rijfx Aa Dsa Labai daug priedų: flanšai, keitikliai, dresavimo įrankiai, dresavimo ritinėliai, vidinio šlifavimo velenai, lunetės ir kt.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1970, Krumplysavimo staklės ZFWZ 6300x40 Gamintojas: WMW-MODUL Modelis: ZFWZ 6300x40/1 Pagaminimo metai: 1970 Didžiausias ratų skersmuo: 7100 mm Krumplių plotis: 1500 mm Didžiausias modulis: 45 Stalo skersmuo: 5300 mm Frezuotuvo skersmuo x plotis: 400x500 mm Didžiausias spiralinio kampas: 45 laipsniai Frezuotuvo skersmuo: 500 mm Frezuotuvo apsukos: 9-63 aps./min. Bendras galios poreikis: 47 kW Staklių svoris: 160 t Komplektuojama su standartine frezavimo galva, tangentiniu krumpliaračiu, vidaus frezavimo galva, keičiamais krumpliaračiais, atramomis. Tedsxln Iwepfx Aa Dsa Galimas vaizdo įrašas.

Būklė: naudotas, Gamybos metai: 2005, - Fagor 8055 CNC control - Additional tank for through-spindle cooling (15 bar) 400 liters - Year of manufacture: 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm Tedpfx Ajtvf Htja Doa - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Būklė: labai geros būklės (naudotas), Su skaitmeniniu ekranu Su vidinio šlifavimo įtaisu Centruotės aukštis 240 mm Atstumas tarp centrų 2500 mm Šlifavimo diskas 750 x 200 x 305 Todezhmfyepfx Aa Dja Šlifavimo disko apsisukimai 890 / 1 120 aps./min. Ruoinio velenas pasukamas 90° Galinis centras konusas MK5 Įvairūs priedai MARCELS MASCHINEN AG

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 055 - 030.0221, Complete overhaul Year 2003 – Fanuc 16i-T Centre height 175 mm, between centres 650 mm 2 external grinding wheels + fine B-axis Country of manufacture: Switzerland Voltage: 3x400V Dimensions: 3680 x 2165 x 2100 mm Tedpezbaz Aofx Aa Dsa Net weight of machine: 5500 kg TECHNICAL SPECIFICATIONS Centre height: 175 mm Between centres: 650 mm LONGITUDINAL SLIDE (Z) Max travel: 800 mm Feed rate: 0.001 – 10,000 mm/min Resolution: 0.0001 mm CROSS SLIDE (X) Max travel: 254 mm / SPW 650 Feed rate: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum workpiece weight (between centres): 80 kg TAILSTOCK Taper: Morse 3 Quill: Ø 50 mm Quill stroke: 35 mm UNIVERSAL GRINDING WHEEL HEADSTOCK Left wheel dimensions: 500 x 80 x 203 mm Right wheel dimensions: 400 x 80 x 203 mm Grinding wheel headstock power: 12.5 kW Rotational speed: 3,200 rpm Programmable cutting speed up to: 50 m/s B-axis stroke: -15° to +195° B-axis indexing accuracy: 0.0001° LEFT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° RIGHT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Unless stated otherwise, the technical data provided are not binding and subject to errors or omissions. Stock no. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Fully overhauled: Mechanical, geometry, hydraulics, and electrical parts (checked and/or replaced) Grinding wheel headstock: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjusted. New paintwork. Workhead: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. New paintwork. Tailstock: Disassembled, checked and overhauled Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic manifold checked. X-axis: Disassembled, worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, tables ground. Z-axis: Disassembled, tables ground, worn and defective parts replaced, hydraulic piston overhauled, new paintwork. Electrical cabinet: Fully checked, various relays replaced. Paintwork: Colours: White RAL 9003 and grey RAL 7011 Geometry adjusted according to manufacturer protocol. Various accessories checked and cleaned.

Būklė: naudotas, Gamybos metai: 1957, Didžiausias tekinimo skersmuo virš staklių: 800 mm Tsdpfoxwp Ehjx Aa Dja Didžiausias tekinimo skersmuo virš suportų: 540 mm Tekinimo ilgis: 4000 mm Centrių aukštis: 400 mm Centrių atstumas: 4000 mm Veleno sukimosi greitis: 9–1140 aps./min Veleno kiaurymė: 96 mm Apytikslis staklių svoris: 8,5 t Staklių matmenys (I x P x A): 7,0 x 1,70 x 1,70 m - su tiltu - Priedai: 3-griebtų FORKARDT griebtuvas 400 mm, 4-griebtų griebtuvas 500 mm, plokštė 800 mm, skaitmeninis atvaizdavimas X ir Z ašyse (ACU-RITE), MULTIFIX galva su įvairiais laikikliais, 2 stacionarios lunetės, 1 vidurinė lunetė, centrinis smaigas, aušinimo sistema

Būklė: naudotas, Gamybos metai: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Center height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal CNC External, Internal and Surface Grinding Machine with polygon, non-circular, multi-edge, and thread grinding capability BWO CNC control type 900 C, type K 51 - 1500 Year of manufacture: 2000 Serial No. 99 033 ----- Center height: 180 mm Distance between centers / grinding length: 1,700 / 1,600 mm Max. workpiece weight between centers: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/surface/internal: 7.5 / 7.5 / 4.0 kW Tjdpfjt Hw Rdex Aa Dja Grinding spindle carrier with 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / cross slide travel: 360 mm Grinding slide feed: 0.001 – 125 mm/min Workpiece spindle speeds, infinitely variable: 1 – 1,000 rpm C-axis spindle mount / bore: 24 mm, MK 4 Table speed (Z-axis): 0.01 – 10 m/min Total power installed: 40 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: Universal CNC cylindrical grinding machine suitable for almost all grinding tasks, in particular also for non-round grinding / eccentric/cam contour grinding and polygon grinding as well as face grinding on multi-edged workpieces and even thread grinding with appropriate grinding wheel profiles. Freely programmable BWO CNC control with a variety of subprograms and simple parameter input. Grinding of multiple diameters in a single setup possible. • B-axis with three grinding spindles, one of them with MOVOMATIC touch probe • MOVOMATIC pneumatic diameter measurement head CR 60, for mounting on the grinding table, control unit type ES 400, • MPM grinding wheel balancing device, straight dresser with diamond fleece mounted on the table, powered diamond wheel dresser, • Workpiece headstock pneumatically shiftable, hydraulic tailstock with adjustable quill, • Various other accessories, but without coolant system Condition: Good to very good – ready for demonstration under power, Ideal machine for spindle manufacturing, etc. Delivery: ex-stock as inspected Payment: strictly net - upon receipt of invoice