Adige Segatrice Automatica Ts72 pirkti naudotą (5 483)

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed are essential. The model is equipped with a swivel arm ranging from 0-60°, and the saw guides are based on carbide inserts. The frame construction ensures precise and quiet operation. Csdpfoudi Unox Aa Doha Machine Features This horizontal metal band saw with a swiveling arm enables cutting on a plane perpendicular to the axis of the material as well as at any angle from 0 to 60°. The workpiece can be manually fed or handled by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide pads and bearings, significantly improving blade guidance, service life, straightness, accuracy, and cut quality. Carbide guidance greatly reduces wear on both the machine and the saw blade. The machine features an efficient coolant pump with a closed-circuit coolant system. The arm of the saw is made from a single cast iron piece, and together with the 27 mm-wide cutting blade, allows for full serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and is fitted with a quick-release clamp. The blade guides are outfitted with hard metal — carbide inserts — and a rolling bearing system. These CARBIDE INSERT GUIDES are responsible for the precision and straightness of the cut. The cast iron work table, fixed to the base, comes with a swivel arm and a separate control panel. During the cutting process, the primary cutting movement is the movement of the cutting blade, while the arm descends as the feed stroke. The descending speed of the arm (cutting speed) is regulated using a hydraulic cylinder. Feed speed is adjusted on the saw’s control panel. You can select between two blade speeds: 37.5 or 75 m/min. Once the arm reaches its lowest position (after cutting the workpiece), the saw blade drive switches off automatically. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened. Additional protection includes automatic shut-off of the saw if the blade breaks. The machine is powered by a worm gear motor. The motor with a thermal fuse protects against overheating during operation. Technical Data: TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter / Dimensions in mm): ANGLE ROUND RECTANGLE SQUARE 0° ø220 260 x 140 200 x 200 45° R ø160 160 x 140 160 x 160 60° R ø100 120 x 100 100 x 100 Price does not apply to machines purchased in Poland.

Būklė: naujas, Gamybos metai: 2026, PREMIUM LINE Series Machine. Cormak S200R Manual Bandsaw for industrial applications. This metal-cutting bandsaw features high cutting accuracy, ensured by a robust cast iron rotating table synchronized with a pivoting arm. The bandsaw is designed for use in large industrial facilities, capable of operating 16h/24h. Cutting angles range from -45º to the left up to 60º to the right. Machine Features The CORMAK S-200 R MANUAL bandsaw (CE-compliant) enables perpendicular cutting relative to the axis of the material or miter cutting at any angle from -45° to +60°. The workpiece can be fed manually or by any automated feeding device. The cutting feed operates by gravity via an oil flow through a dual-chamber hydraulic cylinder. The appropriate arm descent speed is achieved using a valve regulating oil flow between chambers. The operator starts the machine by pressing the start button and sets the cutting speed. Upon finishing the cut, the machine stops automatically, and the operator manually lifts the arm to the starting position. Material feeding is manual. The vise is mounted on an adjustable bed and features a quick-clamp system. Blade guides are equipped with carbide inserts and roller bearings, where the CARBIDE BLADE GUIDES are responsible for high cutting precision and straightness. The arm features an automatic blade tension sensor and is inclined by 25 degrees, extending blade life. A cleaning brush is mounted under the arm for optimal blade cleanliness and function. The machine’s drive is transmitted through a worm gearbox filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. Thermal overload protection on the motor. The saw offers two blade speeds: 35 and 70 m/min. Construction: the arm, vise, and rotary table are all cast iron. The machine features a closed-loop coolant system. It is supplied with a stop and ruler for precise length adjustment of the workpiece. The machine base is a rigid steel sheet cuboid, housing a coolant tank with a pump system. Safety during operation is ensured by an electrical system meeting all CE requirements. The machine is equipped with a limit switch that stops the machine after each cutting cycle, an emergency stop button (“mushroom” type), and multiple micro-switches that disable operation, e.g., when the belt or band covers are open. Technical specifications: TYPE: gravity fed ARM LIFT/DROP: gravity with stepless arm descent adjustment BLADE SPEED: 36/70 m/min MITER CUTTING RANGE: left 45° to right 60° VISE: manual MINIMUM CUTTING DIAMETER: Ø 5 mm MINIMUM MATERIAL LENGTH IN VISE: 30 mm VISE BASE HEIGHT: 890 mm BLADE SIZE: 27x0.9x2910 mm TOTAL POWER: 2.1 kW DIMENSIONS (LxWxH): 1600 x 800 x 1400 mm WEIGHT: 500 kg Maximum cutting capacity [mm]: Angle 0º ø250 320 x 240 240 x 240 Chodpfjfy Ttijx Aa Dja 45º L ø200 220 x 120 190 x 190 45º R ø220 235 x 120 210 x 210 60º R ø110 155 x 110 100 x 100 For more information, please visit our website.

Būklė: naujas, Gamybos metai: 2026, CORMAK BS530H Bandsaw for Metal – Professional Tool for Cutting Pipes and Profiles Cedpfx Aaew U Svle Deha The CORMAK BS530H metal bandsaw is a high-performance semi-automatic machine designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows single-operator management of all machine functions, significantly reducing operation time and improving work ergonomics. Key Features Semi-automatic mode – hydraulic lifting and lowering of the saw arm and vice operation via the control panel. Worm gear drive with bronze elements ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min for various materials. Carbide and roller bearing blade guides for durability and precise blade tracking. Quick-action vice, manually or hydraulically actuated, with adjustable left/right positioning. Miter cutting from -45° to +60° with accurate scale display. Heavy-duty cast iron body ensures cutting stability and long machine lifespan. Hydraulic downfeed control with adjustable return height. Design and Technology Model BS530H stands out with its reinforced drive gearbox and industrial-grade hydraulics, ensuring reliability under intensive use. The massive frame construction minimizes vibrations and guarantees even operation. The ergonomic console allows full process control from a single station. The coolant system, integrated into the base, efficiently dissipates heat and removes debris, protecting the saw blade from overheating. Precision and Work Efficiency Thanks to stepless speed control, selectable manual or semi-automatic operation, and an analog tensiometer for monitoring blade tension, the BS530H metal bandsaw delivers consistent, high-quality cuts even in long production runs. Efficiency is further boosted by a material supporting roller and an arm lock ensuring safety at the end of the cycle. Application The machine is dedicated to industrial manufacturing plants, metal workshops, and firms performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for mass production, prefabrication, and preparing parts for welding or further processing. Standard Equipment Semi-automatic control console Hydraulic vice Blade cleaning brush Liquid cooling system with pump Front material feed roller Analog blade tension gauge CE certification and operating manual Technical Specifications Working height: 965 mm Cutting speed: 20 – 70 m/min Saw blade dimensions: 3770 x 34 x 1.1 mm Coolant system power: 0.1 kW Total power: 3.0 kW Supply voltage: 400 V Dimensions (W x D x H): 2200 x 1400 x 2050 mm Weight: 730 kg

Būklė: naujas, Gamybos metai: 2026, Powerful band saw, featuring a pivoting arm adjustable from -45° to +60°, portable quick-action vise, blade tension gauge, and hydraulically lowered arm with stepless adjustment. Additionally equipped with an ergonomically designed control panel ensuring safety and user comfort. Maximum cutting width is 490 mm. Distinctive features of the band saw include: - The blade tension wheel is fitted with a dial gauge tension meter, providing precise tension indication for optimal cutting results and blade longevity. - The saw frame is rigid, manufactured from cast iron, and resistant to torsion. High-quality drive wheels, fitted inside the frame, support the cutting blade. - The control panel is ergonomic, with clearly marked buttons for main power, start, stop, coolant activation, and blade speed selection (slow/fast). An emergency stop button is also present, compliant with the latest EU safety standards. - The hydraulic cylinder control is mounted on the panel column, allowing precise adjustment of the arm lowering speed and activation. - The drive system is stable thanks to high-grade, hardened, and ground gears. The powerful motor is proportionally matched to the material being cut. - Blade guidance is secure with bearing guides, adjustable to the width of the workpiece. - An auto-stop feature automatically cuts power when the arm reaches its lowest position. - The vise is robust, reliably clamping workpieces; a material stop is included. - The hydraulic cylinder is reinforced, enabling precise arm lowering speed adjustment via a potentiometer. The arm swivels from -45° to +60°, with lifting force adjustable by a spring. - An efficient coolant system is integrated into the saw base. - Workpieces can be rapidly clamped in the vise, which can be re-positioned to either side for angled cutting. - The package includes a coolant collection pan with pump. - The saw’s solid body is cast iron, guaranteeing stability during operation. - The saw arm can be locked in place. - The base is rigid, allowing work at approximately 95 cm height – standard configuration with the machine. Additional advantages: Other features include adjustable blade speed (35/70 m/min), quick-release vise, pivoting arm from -45° to +60° with scale readout, a full-featured unit with excellent value for money, a robust construction for precise, smooth, vibration-free operation, continuously adjustable hydraulic arm lowering, durable carbide roller guides, reinforced bronze worm gearbox, automatic end-stop, and coolant system as standard equipment. Codov R Tgtepfx Aa Doha Technical specifications: Working height – 870 mm Cutting speed – 35/70 m/min Band saw blade dimensions – 3770 x 34 x 1.1 mm Band saw blade width – 34 mm Coolant system pump power – 0.1 kW Total power – 2.8 kW Voltage – 400 V Dimensions (W x D x H) – 2200 x 1400 x 1500 mm Weight – 630 kg

Būklė: naujas, Gamybos metai: 2026, The CORMAK H500SA automatic band saw is a technologically advanced dual-column metal cutting band saw, designed for precise and efficient cutting of large steel components, tubes, and profiles. Thanks to fully automated operation, high power, and robust construction, it is ideal for serial production and heavy-duty industrial applications. Key machine features: - Automatic cutting cycle – complete cutting sequence from loading to return of the saw arm is performed without operator intervention. - Hydraulic vice and material feed – ensure quick, secure, and precise clamping and indexing of the workpiece. - High cutting capacity – allows processing of workpieces up to Ø500 mm or 500 × 500 mm. - Hydraulic blade tensioning – automatically maintains optimal tension, ensuring cutting stability. - Integrated coolant system and powered blade cleaning brush – extend blade life and improve cut quality. Construction and technology: This machine is built on a heavy-duty cast iron and steel frame, guaranteeing high rigidity and minimizing vibrations during operation. The H500SA dual-column band saw is equipped with a 7.1 kW main motor and an independent hydraulic system. The saw frame is inclined at 3° to the working surface for enhanced effectiveness when cutting profiles and structural shapes. The blade is guided via carbide-insert and ball-bearing supports for precise blade tracking. The movable blade guide adjusts to the width of the material, increasing cutting stability and reducing blade wear. Precision and performance: Hydraulically actuated saw arm downfeed with infinitely variable pressure adjustment enables optimal parameter selection for each material. The control panel with an LCD screen allows programming of cut quantity and lengths, as well as real-time monitoring of operational parameters. The machine automatically signals material end, errors, and cutting progress. Applications: The CORMAK H500SA is an industrial metal band saw recommended for: - Steel fabrication shops - Serial production in metalworking plants - Cutting heavy steel tubes and profiles - Wholesale processing of structural and tool steel Standard equipment: - Fully automatic operation - Arm and vice position memory function - Hydraulic power pack and feed - Hydraulic blade tensioning - Powered blade cleaning brush - Coolant system Cedpfxeyctwme Aa Deha - Bi-metallic band saw blade - CE declaration of conformity - User manual (DTR) Technical specifications: Cutting capacity: Ø500 mm or 500 × 500 mm Blade dimensions: 5550 × 41 × 1.3 mm Blade speeds: 40 / 60 / 80 m/min Main motor: 7.1 kW Hydraulic power unit: 1.5 kW Coolant pump: 0.09 kW Blade tensioning: Hydraulic Feeder stroke: 500 mm Load capacity: 3 t Table height: 600 mm Overall dimensions (L×W×H): 2900 × 2200 × 1900 mm Weight: 2400 kg

Būklė: naujas, Gamybos metai: 2026, The CORMAK H400SA automatic bandsaw is a high-performance machine designed for precise and repeatable cutting of large steel workpieces, pipes, and box sections. Its dual-column construction and automated work cycle make it an ideal solution for manufacturing plants, metalworking shops, and logistics centers processing large volumes of material. Main machine advantages - Automatic operation – a complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return. - Hydraulic feed and vise – ensure fast, safe, and precise cutting. - Memory for arm and vise positions – reduces cycle time and increases efficiency in series production. - Cooling system and driven band cleaning brush – extend the service life of the metal bandsaw blade. - Large cutting capacity – able to cut materials up to Ø400 mm or 400 × 400 mm. Construction and technology The dual-column H400SA bandsaw features a robust steel structure with a cast iron body, guaranteeing maximum rigidity and vibration damping. The frame is set at a 3° angle relative to the feed table, facilitating the cutting of profiles and shaped sections. Precision and work efficiency The hydraulically controlled descent of the arm, with adjustable cutting force and a precise throttle valve, allows pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller allows programming of cut length and batch quantity. An LCD display provides information on progress, errors, and material end. An automatic stop function reacts to fault detection or completion of the cutting program. Applications Cedpfxeyctr Rj Aa Doha The CORMAK H400SA is ideally suited for: - metalworking and steel construction industries, - profile and section processing centers, - series production in metal shops and industrial plants, - logistics companies cutting materials to size. Standard equipment - Automatic work cycle - Memory for arm and vise positions - Hydraulic unit and feeding system - Driven band cleaning brush - Liquid cooling system - Bimetal bandsaw blade - CE declaration of conformity - Operating manual (DTR) Cutting range: Ø400 mm or 400 × 400 mm Blade dimensions: 4900 × 41 × 1.3 mm Blade speeds: 40 / 60 / 80 m/min Main motor: 4.6 kW Hydraulic unit: 1.5 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Dimensions (L × W × H): 2600 × 2400 × 1700 mm Weight: 1800 kg

Būklė: naujas, Gamybos metai: 2026, The automatic column-type band saw CORMAK H - 300SA is a high-performance machine designed for automatic cycle cutting of bars, pipes, and profiles made of steel, cast iron, and non-ferrous metals. Its robust saw frame and column construction ensure excellent rigidity and outstanding stability during the cutting process, even with the most challenging materials. The saw is equipped with a PLC controller and an intuitive touchscreen interface. Manual mode allows all operations to be performed from the machine’s control panel. Automatic mode – upon activation, the complete cutting cycle, including clamping the workpiece in the vise, advancing it to the selected length, lowering the saw arm for cutting, and raising the arm to the preset height after the cut, proceeds without operator intervention. Cutting parameters such as number of cut pieces, their dimensions, blade speed, and descent speed are set via the control panel. The machine stops automatically upon completion of the programmed batch, in case of blade breakage, or if another fault is detected by the saw’s control system. The blade drive, based on a frequency-inverter-controlled motor, provides smooth speed adjustment over a wide range. In the event of blade breakage, the machine halts automatically. Accurate blade guidance is ensured by guide bearings and carbide inserts. The movable blade guide head is set according to the size of the material, which enhances blade stability. A coolant system and cleaning brush prolong blade life and maintain optimal cutting conditions. Hydraulically forced descent of the arm is precisely adjustable via a throttle valve. The rapid-feed system shortens cutting times for individual sections. The hydraulic feed system enables a fully automatic operation cycle. The controller, equipped with an LCD display, facilitates programming of the saw, signals material end, displays errors, and provides a cut-piece counter after the programmed cycle. Maximum material feed per stroke is 500 mm, with accuracy of +/- 0.2 mm per stroke. Technical Data: Cutting capacity: ∅ 300 mm / □ height 300 mm x width 300 mm Bundle cutting: max 260 x 90 mm Blade (length x width x thickness): 3505x27x0.9 mm Cutting speeds: 40/60/80 m/min Feed speed: hydraulic, stepless adjustment Motor: 3.8 kW Hydraulic unit: 0.75 kW Cedpfxsiz S Nye Aa Dsha Coolant pump: 0.09 kW Feeder stroke: 500 mm Load capacity: 1500 kg Dimensions (L x W x H): 1750 x 1950 x 1550 mm Weight: 1200 kg

Būklė: naujas, Gamybos metai: 2026, The CORMAK H-350SA column band saw is a high-performance machine designed for automatic-cycle cutting of solid materials and profiles. Its robust body and sturdy saw frame, combined with the column-guided design, ensure excellent rigidity and an exceptional level of stability during cutting, even with the toughest-to-machine metals. The saw is equipped with a PLC controller and an easy-to-use touchscreen interface. A notable advantage of this model is its swiveling head, enabling cutting within a 0°–60° range—both in automatic and semi-automatic cycles—with smooth angle adjustment. Manual and Automatic Modes: The saw allows for both manual operations from the control panel and fully automatic cutting cycles, eliminating the need for constant operator supervision. Top Vice Clamp: The saw is adapted for bundle cutting. Automatic Cutting Cycle: In automatic mode, the entire cutting process—including clamping the workpiece, feeding to the specified length, lowering the arm for cutting, and raising it after the cut—is executed without operator involvement. Panel-Controlled Parameters: Cutting parameters such as piece count, workpiece dimensions, band speed, and others are all set and controlled via a user-friendly touchscreen control panel. Robust Construction: The machine’s body is made of cast iron mounted on a rigid, space-frame base, providing outstanding rigidity and stability. Band Drive System: A powerful three-speed motor, hydraulic band tensioning, cooling system, and cleaning brush ensure precise and efficient cutting performance. Safety System: In case of blade breakage, the machine stops automatically, enhancing operational safety. Hydraulic Material Feed System: This system allows the machine to operate in a fully automatic cycle with precise feed length adjustment. Innovation and ISO Standards: Cormak ensures innovative solutions and production compliant with ISO 9001 and ISO 14001 standards, confirming high quality, safety, and product reliability. Technical specifications: Cutting capacity: Ø350 or 350 x 350 mm Blade: 4515 x 34 x 1.1 mm Cutting speeds: 27/45/69 m/min Total power: 4.8 kW Hydraulic unit: 0.75 kW Coolant pump: 0.04 kW Blade tensioning: hydraulic Chodpfx Aaewdunws Dsa Feeder stroke: 500 mm Load capacity: 1500 kg Table height: 700 mm Dimensions: 2800 x 2200 x 1700 mm Weight: 1500 kg

Būklė: naujas, Gamybos metai: 2026, The CORMAK BS370SA model is a modern automatic metal bandsaw designed for efficient batch cutting of pipes, profiles, and solid materials with various geometries. Its robust construction, full automation of processes, and high cutting accuracy make this machine an excellent choice for manufacturing plants, tool workshops, and metalworking companies where repeatability and reliability are paramount. Key Features - Automatic cutting cycle: clamping, material feed, cutting, and arm return are completed without operator intervention. - Mitre cutting capability across the entire working range – up to 45° to the left and 60° to the right. - Inverter-driven variable blade speed adjustment from 5–90 m/min. - Hydraulic control of the saw arm and vice for precision and operator convenience. - Material feed system equipped with a 2450 mm roller conveyor, 370 mm feed per cycle, with ±0.2 mm accuracy. - Controller with operator panel: allows programming of cutting parameters, part count control, and error signalling. Construction and Technology The CORMAK BS370SA bandsaw is built on a rigid welded frame, ensuring work stability and vibration reduction. Hydraulic feed and workpiece clamping, precision blade guides, and stepless speed control guarantee high-quality and safe operation. The machine comes equipped with a roller conveyor to facilitate automatic material feeding. Precision and Performance Thanks to high-grade components and modern engineering solutions, the CORMAK BS370SA bandsaw offers repeatable, precise cuts. Adjustable cutting speed and hydraulic blade tension ensure long tool life and full control over the cutting process. Application This machine is recommended for facilities engaged in serial production, processing of steel, aluminum, and non-ferrous metal components. It is particularly suitable as a bandsaw for pipes, profiles, and solid materials in the steel construction, prefabrication, and precision manufacturing industries. Standard Equipment - Control console on a separate pedestal - Hydraulic vice and saw arm control - Roller conveyor for automatic material feed - Saw arm position memory - Blade cleaning brush - Coolant system with pump - Bimetal bandsaw blade - CE conformity declaration and operator’s manual Technical specifications Motor power: 1.5 kW (400 V) Hydraulic motor power: 0.75 kW (400 V) Blade dimensions: 3160 x 27 x 0.9 mm Cutting speed (variable): 5–90 m/min Saw frame rotation angle: up to 60° Workpiece section at 90°: ● 270 mm, ■ 260 mm, ▅ 370 x 220 mm Workpiece section at 45°: ● 240 mm, ■ 180 x 180 mm, ▅ 240 x 160 mm Workpiece section at 60°: ● 160 mm, ■ 100 x 100 mm Chodpfx Ajxiv Hcea Dea Machine length: 3970 mm Machine width: 1850 mm Machine height: 1763 mm Net weight: 770 kg Gross weight: 925 kg The machine is equipped with an additional roller conveyor (length: 2450 mm).

Būklė: naujas, Gamybos metai: 2025, The SCV8900TC VIBER BIG-BAG is a modern industrial extraction unit designed for heavy-duty use in woodworking and manufacturing plants. Featuring a BIG-BAG system and VIBER automatic filter cleaning, the unit ensures continuous operation with minimal maintenance while offering substantial waste capacity. This is the only solution of its kind available on the Polish market! Key machine features - BIG-BAG – high-capacity waste container extending the interval between disposals - VIBER system – automatic filter cleaning guarantees long-term filtration efficiency - TC housing – effective acoustic insulation and vibration damping - REHEAT – air heat recovery system improves the energy balance of the facility - DAMAGE PROTECT – mechanical protection for the impeller against the intake of hard objects - Exceptional seal of the suction system – maximum efficiency and zero heat loss during winter Construction and technology The unit is equipped with a dynamically balanced metal impeller for quiet, stable operation and maximum airflow capacity. The dust fan is powered by a reliable 7.5 kW motor. The impeller blade design is aerodynamically optimized, reducing energy consumption. Precision and performance With an airflow capacity of 8,900 m³/h and filtration down to 5 microns, the unit provides excellent operating conditions even in the most demanding woodworking and industrial applications. The SCV8900TC VIBER BIG-BAG allows connection to several machines simultaneously, supporting continuous duty operation. Csdpfx Aoup Df Tsa Djha Application This machine is dedicated to professional woodworking plants, joineries, furniture manufacturers, and large-scale industrial lines where clean air is critical. The central extraction system is ideal for use with equipment such as panel saws, edge banders, grinders, and CNC centres. Standard equipment - 5-micron polyester filters - Automatic filter cleaning system (VIBER) - Integrated REHEAT system - BIG-BAG waste unit - DAMAGE PROTECT system - Control cabinet Optional equipment - HEPA filter for finer dust fractions - Container fill monitoring - Differential pressure sensors - Remote extraction control Technical specifications Supply voltage: 400 V Motor power: 7.5 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category "G" Filter dimensions: Φ160 x 960 mm Number of filters: 45 units Filter surface area: 23 m² Inlet diameter: 350 mm Capacity: 8,900 m³/h Vacuum: 3,000 Pa Air speed: 32 m/s Noise level: 80 dB Number of BigBags: 1 BigBag capacity: 1,250 l Dimensions: 2400 x 1100 x 3600 mm Weight: 540 kg

Būklė: naujas, Gamybos metai: 2026, SCV11300TC VIBER BIG-BAG is a modern industrial dust extraction unit designed for intensive operation in woodworking and manufacturing plants. The machine stands out thanks to its use of two high-capacity BIG-BAG type collection bags, significantly improving waste management efficiency. Outfitted with advanced filtration and safety systems, it ensures effective extraction of sawdust, dust, and chips, even during continuous operation. Key machine features Two BIG-BAGs – a unique solution on the market that increases waste collection capacity. VIBER system – automatic filter shaking maintains constant extraction performance. TC enclosure – a fully soundproofed construction to reduce noise and vibration. DAMAGE PROTECT – mechanical protections safeguard the impeller from damage caused by larger objects. REHEAT – heat recovery from exhaust air improves the plant’s energy efficiency. Design and technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced impeller, ensuring stable, failure-free operation and high suction capacity of 11,300 m3/h. The housing is designed for acoustic insulation and maximum tightness of the suction system, resulting in cleaner and warmer air in the workplace. Precision and work efficiency With 64 polyester filters rated at 5 microns and the option to fit an additional HEPA filter, the unit guarantees safe and accurate air purification. High suction velocity (28–32 m/s) facilitates efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG model is the ideal solution for: woodworking shops furniture factories panel saw, edgebander, and sander operators other installations requiring a central extraction system Standard equipment VIBER system – automatic filter shaking Two BIG-BAGs Control cabinet with operator panel TC enclosure with sound insulation DAMAGE PROTECT safety system Optional equipment HEPA filter for very fine particles Csdpfx Asudav Nsa Doha BIG-BAG fill level sensors Automatic fan reverse Technical specifications Supply voltage 400 V Power 11 kW Motor speed 3000 rpm Filter type Polyester, 5 microns / filter category “G” Filter dimensions Φ160 x 960 mm Number of filters 64 pcs Filtration area 30 m2 Inlet diameter 350 mm Outlet diameter 500 mm Airflow 11300 m3/h Vacuum pressure 3000 Pa Suction velocity 40 m/s Noise level 80 dB Number of Big Bags 2 Big Bag capacity 1250 l / Total 2500 l Dimensions (L x W x H) 3250 x 1100 x 3700 mm Weight 820 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK DCV Series Dust Extractors have been developed primarily for filtering very fine dust particles. They are designed to self-clean in an automatic cycle, entirely without operator intervention. Our engineering department has placed great emphasis on developing a motorized filter shaking system, in which the entire filter cleaning cycle is performed automatically in a closed system. Advantages of DCV Dust Extractors - Durable, robust construction ensuring quiet and vibration-free operation of the dust extractor - Very high airtightness of the entire suction system, guaranteeing optimal air quality inside the workshop and heat retention during the heating season - Powerful and quiet centrifugal fan providing high vacuum performance - Possibility to build an overhead duct system and deliver extraction to several machines operating simultaneously with DCV units - Reliable automatic filter cleaning system - Mobile chassis system for easy relocation throughout the facility - Waste containers designed to maintain 99.99% system tightness, equipped with a mobile carriage system - Control cabinet enabling precise monitoring of filter contamination and device on/off control - Polyester filter retains particles as small as 5 microns; for finer filtration, e.g. HEPA filters are required - Use of this dust extractor in explosive atmospheres is strictly forbidden Chodpfxeuc Unqo Aa Dsa - The extractor is designed for woodworking applications with sawdust, chips, dust (not suitable for wet raw materials such as wet sawdust) - Prior to operation, the lower beam must be removed to provide free access to the chip containers Technical Specifications MOTOR POWER (CONTINUOUS S1): 3.0 kW SPEED: 3000 rpm EXTRACTION CAPACITY: 4500 m³/h SUCTION INLET DIAMETER: 200 mm SUCTION SPEED: 28-32 m/s FILTER AREA: 6 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 18 DIMENSIONS: 752 x 1502 x 2200 mm WEIGHT: 200 kg

Būklė: naujas, Gamybos metai: 2026, The new TC series extraction units are equipped with a fully enclosed upper housing with a warm air return outlet, which absorbs noise and vibrations during operation! The only design in Poland featuring a lock chamber ("śluza"), which protects the motor, filters, and turbine from damage. Compatible with machines such as CNC milling machines, panel saws, edge banders with pre-milling, wide belt sanders, sliding table saws, four-side moulders, etc. Advantages of DCV Dust Extractors: - Durable, heavy-duty construction guarantees quiet and vibration-free dust extraction - The new TC extraction series features a full upper casing absorbing noise and vibrations generated during operation, as well as the option for warm air return - Very high airtightness of the entire suction system ensures the best possible air quality in the workplace, with no heat loss during the heating season - Powerful and quiet radial fan guarantees high negative pressure performance - Capability to create an overhead ducting system to simultaneously connect several machines to the DCV extractors - Reliable filter cleaning system with automatic cycle option - Mobile chassis for easy relocation of the units throughout the facility - Waste containers designed to maintain 99.99% system tightness, and equipped with a mobile chassis system - Control cabinet for starting/stopping the device - Polyester filter captures dust particles as small as 5 microns; for finer filtration, a HEPA or similar filter is required - Do not use this extractor in explosive atmospheres - The extractor is not suitable for operation with wet materials (e.g. wet sawdust) - Before starting the extractor, remove the lower beam for unobstructed access to the chip containers - Warm air return/reduction is available at an additional charge Technical Specifications MOTOR POWER (Continuous duty S1): 7.5 kW / 400 V, 50 Hz ROTATION SPEED: 3000 rpm EXTRACTION CAPACITY: 8900 m³/h SUCTION INLET DIAMETER: 300 mm SUCTION VELOCITY: 28–32 m/s FILTER SURFACE AREA: 20 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 45 DIMENSIONS: 1170 x 2400 x 2240 mm Chjdpfjudaazjx Aa Dsa WEIGHT: 500 kg

Būklė: naujas, Gamybos metai: 2026, Thanks to many years of experience of our CORMAK team, the DCV series extractors in the TC Viber version have been developed. The design of a new technological line has enabled us to create top-class extractors. Advantages: - Equipped with an additional pair of doors for easier bag replacement - The DCV 6500TC extractor marks another milestone in the production of efficient dust and chip extractors, designed to maintain consistent extraction parameters throughout the entire work cycle - The new TC series offers a fully enclosed upper housing that absorbs noise and vibrations during operation, as well as the ability to return warm air - Maintenance-free filter shaking system with the option for automatic operation - Newly patented safety system ensures reliable operation of the device - Durable, robust construction ensures quiet and vibration-free operation of the extractor - Compact footprint, yet capable of filtering large amounts of dust and chips - Powerful and quiet fan provides high negative pressure performance - Reliability confirmed by manufacturing facilities coping with high daily workloads - Specially designed impeller blades make the units more efficient and effective, also contributing to energy savings - Very high tightness of the entire suction system guarantees the highest indoor air quality and, during the heating season, prevents heat loss - Large filter area Cedpfx Aouc U N Uoa Dsha - Possibility to build an overhead system connecting several machines operating simultaneously with DCV 6500 extractors - Fast replacement of waste bins, designed to maintain 99.99% system airtightness - Metal waste bins with mobile running gear for easy and trouble-free movement. Also equipped with a sight glass to check the fill level of the containers - Low-noise operation and high efficiency ensured by a balanced metal impeller and upgraded motor - Provides perfection and cleanliness at the workstation, directly impacting the quality of your products - Excellent cooperation with machines such as sanders, edgebanders, panel saws, etc. - Control cabinet for switching the device on/off - We guarantee high purification quality! - Polyester filter traps dust down to 5 microns; for filtering smaller particles, use e.g. a HEPA filter - Do not use this extractor in explosive atmospheres - The extractor is intended for use in the woodworking industry with sawdust, chips, and dust (not suitable for wet material such as wet sawdust) - Before starting the extractor, remove the lower beam to allow access to the chip containers - MADE IN POLAND Technical specifications: MOTOR POWER (CONTINUOUS S1): 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 6500 m³/h SUCTION PORT DIAMETER: 280 mm SUCTION SPEED: 28–32 m/s FILTER AREA: 16 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 32 WASTE BIN CAPACITY: 500 L DIMENSIONS: 2440 x 930 x 2270 mm WEIGHT: 440 kg

Būklė: naujas, Gamybos metai: 2026, The SCV15000TC VIBER BIG-BAG professional industrial extractor is a high-performance, reliable dust extraction system designed for large woodworking plants and industrial production lines. Equipped with two large-capacity BIG-BAG collection sacks, it ensures maximum work continuity and simplified operation while minimizing downtime. This is the ideal chip and dust extraction unit for machines with high demands for effective dust removal. Key machine features: - Capacity: 15,000 m³/h – delivers efficient extraction even in the most demanding industrial applications. - 18.5 kW motor power – high-performance S1 motor for continuous operation in tough conditions. - VIBER system – automatic filter cleaning ensures long filter life. - TC enclosure – fully sound-insulated, reducing noise and vibrations. - Two BIG-BAG sacks – substantial waste volume increase and more convenient handling. - REHEAT – extraction air heat recovery system reduces energy losses. - DAMAGE PROTECT – mechanical protection of the impeller and suction channel against damage caused by large items being sucked in. Construction and technology: The SCV15000TC VIBER BIG-BAG is based on a rigid steel frame engineered for intensive use in harsh industrial environments. The chip extraction fan features a dynamically balanced impeller and aerodynamically optimized blades, ensuring consistent, high efficiency with low noise levels. The filtration unit consists of 117 polyester cartridges with a filter area designed for intensive dust collection operations. Precision and work efficiency: Thanks to high negative pressure and a large inlet diameter (400 mm), this extractor efficiently removes shavings, dust, and chips from multiple workstations simultaneously. The design is suitable for use as a central extraction system, allowing seamless integration with entire production lines. High energy efficiency and the automatic filter cleaning system minimize maintenance requirements, thereby reducing operating costs. Applications: The SCV15000TC VIBER BIG-BAG is a woodworking and industrial extractor recommended for use with: - Panel saws and beam saws - Wide-belt sanders - Edge banders and CNC routers - Automated lines for wood and wood-based material processing Standard equipment: - Automatic VIBER filter cleaning system - Polyester filter cartridges (117 pcs) - TC sound-absorbing enclosure - DAMAGE PROTECT system - Control cabinet with main switch - Two BIG-BAG chambers with supports Optional equipment: - HEPA filters for particles below 5 microns - Bag fill level sensor - Automatic shut-off valve - Spark detection and fire suppression system Technical specifications: Chodpfx Aeup Difsa Dja Supply voltage: 400 V Motor power: 18.5 kW Rotation speed: 3000 rpm Filter type: Polyester, 5 microns / Filter class “G” Filter dimensions: Φ160 x 960 mm Filter area: 59 m² Number of filters: 117 Inlet diameter: 400 mm Airflow capacity: 15,000 m³/h Negative pressure: 3,000 Pa Air speed: 40 m/s Noise level: 80 dB Number of BigBag sacks: 2 BigBag volume: 1,250 l each / 2,500 l total Dimensions (L x W x H): 3,850 x 1,500 x 3,800 mm Weight: 1,150 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK OS3500 is a mobile welding fume extractor designed for efficient removal of fumes and exhaust gases directly at the source. The unit combines strong suction power with high airflow, and thanks to its sound-insulated fan chamber, it operates quietly and smoothly. Additional advantages include the integrated pneumatic filter cleaning system, airflow adjustment at the extraction inlet, and robust, industrial-grade construction. Automatic filter cleaning – consistent performance The CORMAK OS3500 also emphasizes user convenience and stable performance over time. For this reason, it features an automatic pneumatic filter cleaning system. In practice, this means the filter is regularly 'pulsed' clean of accumulated contaminants without the need for frequent manual intervention. The benefits are twofold: firstly, the extractor maintains a consistent level of efficiency; secondly, you reduce maintenance downtime and operating costs. In a production environment, this is highly significant, as unplanned downtime or loss of suction directly impact workflow and workplace conditions. Adjustable extraction power matched to operations Another advantage is the ability to adjust fume and exhaust flow at the extraction inlet. This feature allows you to tailor extraction power to actual needs—less for short spot welds, more for continuous long welding, or for grinding operations. Adjustment directly at the extraction point enables quick, operator-friendly settings without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and work comfort (for example, when working with small details where excessive suction could hinder manipulation). Robust design and mobility The OS3500 is built for daily use, so high-quality workmanship is a priority. The solid construction ensures reliable operation in workshop and industrial settings—where equipment is frequently moved, works long hours, and must endure intensive operation. Mobility allows the extractor to be easily used across various workstations without the need for a fixed installation throughout the facility. This practical solution is ideal for companies with several workstations, as well as those that often change workflows or handle varied projects. Wide range of applications In practice, the OS3500 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other dust- and fume-generating processes. Its primary function is to improve working conditions by reducing airborne contaminants in the operator's breathing zone. This solution benefits team health, work comfort, and positively influences the perception of your facility as a modern and safe workplace. Technical specifications Type Airflow (m3/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 Codpjygt Utsfx Aa Djha *The set does not include a power cable or plug, as connection infrastructure and customer requirements may vary.

Būklė: naujas, Gamybos metai: 2026, CORMAK OS-4000M is an industrial, mobile welding fume extractor designed for the effective removal of welding fumes, dust, and fine contaminants generated during welding and related operations. The OS4000S features a new, lower housing design. The device operates locally—at the workstation—so that contaminants are captured before they spread throughout the workshop hall. This directly improves working comfort, visibility in the welding area, and helps maintain occupational health and safety standards. Specifications: Cjdpfxoy Sgbro Aa Doha - Model: OS4000M - Power supply: 400 V - Power: 4.0 kW - Airflow: 3,000–4,000 m³/h - Operating pressure: 3,050–2,600 Pa - Filtration efficiency: 99.00% - Number of filter cartridges: 4 - Filter specification: Ø325 × 600 mm - Filter material: polyester - Filter cleaning method: pneumatic, pulse-jet - Dust bin capacity: 50 l - Noise level: ≤ 78 dB(A) - Dimensions: 900 × 900 × 2,300 mm Why choose the OS-4000M? - High extraction efficiency – effective suction of fumes and dust near the welding arc. - Large surface cartridge filtration – high separation efficiency for fine particles. - Automatic pneumatic filter cleaning – stable operation without frequent servicing interruptions. - Mobile construction – easy movement between workstations (workshop/production). - Dust collection bin – quick and convenient emptying with minimal mess. - Simple operation – clear controls and quick access to consumable components. Efficient filtration and constant suction power The OS-4000M utilizes a multi-stage filtration system using cartridge filters. This enables effective capture of fine welding dust and fumes. Additionally, the pulse-jet (pneumatic) cleaning system "shakes off" dust from the filter surfaces, which: - Maintains consistent extraction performance - Extends filter lifespan - Reduces drops in power during heavy-duty operation Workplace comfort and safety Extracting contaminants directly at the source provides immediate benefits: - Less fume in the operator’s workspace - Improved visibility of the weld and more stable working conditions - Cleaner hall and less dust settling on machinery and installations Applications CORMAK OS-4000M is ideally suited for: - MIG/MAG, TIG, MMA welding - Metalworking and servicing in production environments - Grinding/deburring near the workstation - Light cutting/processing tasks where dust and fumes are generated.

Būklė: naujas, Gamybos metai: 2026, CORMAK OS-4000S is an industrial welding fume extractor designed for the efficient removal of welding fumes, dust, and fine contaminants generated during welding and related activities. The OS4000S features a new, lower-profile housing. The unit operates locally—directly at the workstation—therefore contaminants are captured before they can disperse throughout the hall. This significantly improves workplace comfort, visibility in the welding zone, and supports occupational health and safety standards. Specifications: Model: OS4000S Power Supply: 400 V Power Output: 4.0 kW Airflow: 3,000–4,000 m³/h Operating Pressure: 3,050–2,600 Pa Filtration Efficiency: 99.00% Number of Filter Cartridges: 4 pcs Filter Specification: Ø325 × 600 mm Filter Material: Polyester Filter Cleaning Method: Pneumatic, pulse jet Dust Bin Capacity: 50 l Noise Level: ≤ 78 dB(A) Dimensions: 900 × 900 × 1,950 mm Why choose the OS-4000S? - High extraction performance – effective fume and dust capture near the welding arc. - Large surface area cartridge filtration – highly effective separation of fine particles. - Automatic pneumatic filter cleaning – stable operation with minimal maintenance downtime. - Dust bin – hassle-free and quick emptying with no mess. - Simple operation – user-friendly controls and easy access to serviceable components. Efficient filtration and constant suction power The OS-4000S uses a multi-stage filtration system based on cartridge filters. This enables the unit to effectively capture fine dust and welding fume particles. Cjdpfxjy Sgc Ae Aa Doha Additionally, the pulse-jet cleaning system (pneumatic) shakes dust off the filter surfaces, which: maintains consistent extraction performance, extends filter service life, reduces suction losses during intensive use. Comfort and safety at the workstation Extracting contaminants directly at the source provides immediate benefits: less fume in the operator’s workspace, improved visibility of the weld seam and more stable working conditions, a cleaner shop floor and reduced dust accumulation on machines/installations. Applications The CORMAK OS-4000S is ideal for: MIG/MAG, TIG, MMA welding operations, metalworking and maintenance tasks in production environments, grinding/deburring close to the workstation, light cutting/machining processes where dust and fumes are generated.

Būklė: naujas, Gamybos metai: 2026, The CORMAK ODL6K extraction and filtration unit is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. With 99.9% filtration efficiency, it removes harmful particles and fumes, guaranteeing clean air in the workspace. The ODL6K features an automatic filter cleaning system, a high-performance fan, and a compact, robust construction that enables easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient disposal of collected waste. This is a comprehensive solution that enhances safety, improves work efficiency, and extends the lifespan of laser systems. The ODL6K combines automatic filter cleaning with compressed air, a high-efficiency fan generating significant negative pressure, and 99.9% filtration efficiency for particles as small as 0.3 μm, owing to the use of advanced filters. The system is equipped with an ergonomic dust drawer for fast and easy removal of accumulated dust without disassembly. Additionally, the modular design allows installation of extraction nozzles on either the left or right side of the unit, offering flexible adaptation to production hall layouts. The ODL6K is a compact, efficient, and reliable solution for any laser cutting system—increasing safety, comfort, and operational efficiency. Key functions of the extraction and filtration system in laser processing: • Removal and neutralization of laser fumes. • Ensuring safety of the laser workstation and its surroundings. • Extending the lifespan of laser systems by keeping them clean and protecting vital components from contamination. Chodpjwcd I Refx Aa Doa Main advantages of the CORMAK ODL6K extraction unit: • Equipped with automatic filter cleaning using compressed air. Under pressure, the filter cartridge is shaken, effectively cleaning the filter element and extending its service life. This ensures the system maintains its efficiency for a longer period. • The filtration element used is imported and made from high-quality material. The fireproof Nano-type filter offers high filtration efficiency, retaining particles as small as 0.3 μm at over 99.9%. • The large dust collection drawer allows for convenient accumulation and cleaning of dust, facilitating system maintenance. • The motors used in the system are equipped with overload protection, ensuring a high level of safety and reliable operation. • The specially designed, high-efficiency fan wheel generates significant negative pressure, enabling effective removal of laser fumes and ensuring a high airflow rate. • The total system purification efficiency is 0.3 μm, with effectiveness exceeding 99.9%, demonstrating the high efficiency of the extraction unit in removing harmful particles from the air. In addition, it features a compact design, simplifying operation and maintenance. Technical specifications: Number of filter cartridges: 6 Airflow: 6000 m³/h Air pressure: 3000 Pa Filtration efficiency: 99.99% Filter size: 350x660 mm Fan power: 7.5 kW Inlet diameter: 300 mm Weight: 590 kg Dimensions (L x W x H): 1150 x 1950 x 2250 mm

Būklė: naujas, Gamybos metai: 2026, CORMAK OS2400 is a mobile welding fume extractor designed for the effective removal of fumes and exhaust gases directly at the source. The unit combines high suction power with a large airflow, and thanks to a sound-insulated fan chamber, operates with minimal noise. Additional advantages include an integrated pneumatic filter cleaning system, airflow adjustment at the suction nozzle, and robust, industrial-grade construction. Automatic Filter Cleaning – Consistent Performance CORMAK OS2400 prioritizes user convenience and stable performance over time. That’s why it features an automatic pneumatic filter cleaning system. In practice, this means the filter is regularly pulsed to remove accumulated contaminants without the need for frequent manual intervention. This delivers a dual benefit: first, the extractor maintains a constant performance level; second, you reduce maintenance downtime and operating costs. In a production environment, this is vital, as any unplanned downtime or loss of suction affects workflow and workplace conditions. Adjustable Extraction Power Adapted to Operation Another advantage is the ability to adjust the smoke and fume flow at the suction nozzle. This feature allows you to match the extraction strength to actual requirements: different for short spot welds, continuous welding, or grinding operations. Adjustment at the nozzle provides quick, operator-specific settings without time-consuming configuration changes. This makes it easier to balance extraction efficiency and operator comfort (e.g., for smaller parts, where excessive suction could hinder manipulation). Durable Construction and Mobility Chodpfx Aaeyguclo Dja The OS2400 is built for daily industrial use, with a strong emphasis on build quality. The solid construction excels in workshop and industrial settings—where devices are relocated, run for extended periods, and must withstand heavy-duty usage. Mobility makes it easy to use the extractor at different workstations without investing in a full-scale central installation. This is a practical solution both for businesses with a few workstations and those that frequently rearrange their workshop layout or handle diverse projects. Wide Range of Applications In practice, the OS2400 is suitable wherever air pollution is generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes producing dust and fumes. Its purpose is to improve working conditions by reducing contaminant levels in the operator’s breathing zone. This enhances workforce health, comfort, and demonstrates the company’s commitment to a modern and safe workplace. Technical Specifications Type Airflow (m3/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *Please note: The set does not include a power cable or plug due to the varied connection infrastructure and client requirements.

Būklė: naujas, Gamybos metai: 2026, The CORMAK ODL4K extraction and filtration system is a state-of-the-art solution that ensures safe working conditions for operators and provides effective protection for laser system components against contamination and damage. Filtration efficiency of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL4K stands out with its automatic filter cleaning system, high-performance fan, and a compact, robust design allowing for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which enables quick and convenient emptying of collected residues. This modern extraction system ensures effective contaminant filtration and protection of key laser system components. The ODL4K combines automatic filter cleaning with compressed air, a powerful fan generating high negative pressure, and filtration down to 0.3 μm particles at 99.9% efficiency thanks to appropriate filters installed. The system features an ergonomic waste drawer, allowing fast and convenient dust removal without dismantling the unit. Moreover, the modular design enables installation of extraction inlets on both the left and right sides, providing flexible adaptation to the layout of the production facility. ODL4K is a compact, efficient, and reliable solution for any laser cutting system—increasing safety, comfort, and work efficiency. Main functions of the exhaust and fume filtration system in the laser processing process: Removal and neutralization of laser fumes. Ensuring workplace safety at the laser station and its immediate surroundings. Prolonging the service life of laser systems by keeping them clean and protecting essential components from contamination. Key advantages of the CORMAK ODL4K extraction system: - The extractor features automatic filter cleaning via compressed air. The resulting pressure ‘shakes off’ the filter, efficiently cleaning the filter cartridge and thus extending its lifespan. This helps the system maintain its efficiency over longer periods. - The filtration element used in the system is imported and made from high-quality material. The fire-resistant Nano-type filter boasts high filtration efficiency, capturing particles down to 0.3 μm with over 99.9% efficiency. - The large dust collection drawer enables convenient dust gathering and cleaning, simplifying system maintenance. - Motors used in the system are equipped with overload protection, ensuring a high level of safety and reliable operation. - A specially designed high-efficiency fan impeller generates high negative pressure, effectively removing laser fumes and ensuring high airflow rates. - The system’s total purification efficiency is for 0.3 μm particles, with efficiency above 99.9%, confirming the high effectiveness of the extractor in removing harmful particles from the air. Additionally, it features a compact design for easy operation and maintenance. Technical specifications: Number of filter cartridges: 4 Airflow: 4000 m³/h Csdpewcdrvjfx Aa Doha Air pressure: 3000 Pa Filtration efficiency: 99.99% Filter size: 350x660 mm Fan power: 5.5 kW Inlet diameter: 250 mm Weight: 420 kg Dimensions (L x W x H): 1050 x 1400 x 2250 mm

Būklė: naujas, Gamybos metai: 2026, The CORMAK LUP7T Wood Splitter is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and kindling. This model is suitable for logs up to 520 mm in length and 250 mm in diameter, making it ideal for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic ram with automatic return, two-hand operation, a safety cage covering the working area, and a stand with wheels included. Consider the CORMAK LUP7T if you need a compact 230 V splitter for regularly preparing firewood at home. Applications of the CORMAK LUP7T Splitter: The CORMAK LUP7T is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: - Domestic households - Farms - Wood-heated homes - Fireplace and stove users - Small firewood preparation points - Agro-tourism facilities and guesthouses - Workshops and utility areas - Users preparing both seasoned and fresh wood The LUP7T model is perfect for those who want to prepare firewood logs faster and more conveniently, reducing the effort required for manual splitting. Who is the 7-ton log splitter for? The CORMAK LUP7T is intended for users who need a compact and easy-to-operate device for firewood splitting. With a splitting force of 7 tons, 230 V power supply, and a small design without a stand, this model is well-suited for use at home, on a farm, or in a small service facility. It’s a good choice for: - Owners of wood-heated houses - Fireplace users - Smallholders preparing their own firewood - People looking to reduce manual wood chopping - Smaller businesses and facilities that regularly use firewood - Users seeking a splitter that is easier to store than the model with a stand The CORMAK LUP7T features a dual-hand operation system, which provides greater control over the splitting process. The user operates the machine with both hands, minimizing the risk of accidental contact with the work area. An additional safety feature is the protective cover for the splitting area. This is especially important when the splitter is used regularly and the operator wants to work in a more organized and predictable manner. Smooth Adjustment of Splitting Distance: The splitter offers a stepless splitting distance adjustment, allowing better adaptation of the device to the length of the wood being processed. This reduces unnecessary operating movements and streamlines the preparation of subsequent logs. This function is particularly practical when working with consistent log sizes, such as preparing wood for fireplaces, stoves, or boilers. Technical specifications of the CORMAK LUP7T: Splitting force: max. 7 T Maximum log diameter: 250 mm Maximum log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: mains Length: 950 mm Width: 325 mm Height: 510 mm Cjdpfjzarp Nsx Aa Dsha Warranty: 2 years Stand: not included Standard equipment: - CORMAK LUP7T Hydraulic Wood Splitter - Hydraulic ram with automatic return - Two-hand operation system - Safety cover for the working area - Stable splitting blade - 230 V / 2200 W Motor - Powder-coated steel construction

Būklė: naujas, Gamybos metai: 2026, The CORMAK LUP7TS LOG SPLITTER is an electric log splitter with a splitting force of 7 tonnes, designed for preparing firewood and kindling. This model handles logs up to 520 mm in length and up to 250 mm in diameter, making it ideal for residential use. The splitter is equipped with a 230 V / 2200 W motor, automatic return hydraulic cylinder, two-hand safety operation, protective cage for the working area, and comes with a stand and wheels. Consider the CORMAK LUP7TS if you need a compact 230 V log splitter for regular home firewood preparation. Applications of the CORMAK LUP7TS Log Splitter: The CORMAK LUP7TS is perfectly suited for situations where firewood is prepared regularly, but where the use of a large industrial machine or a version with a stand is unnecessary. Recommended uses: - Households - Farms - Wood-heated homes - Fireplace and stove users - Small firewood preparation points - Agritourism facilities and guesthouses - Workshops and utility rooms - Users who prepare both seasoned and green wood The LUP7TS model is ideal for those who wish to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton log splitter suitable for? The CORMAK LUP7TS is designed for users seeking a compact, easy-to-use machine for firewood. With a 7-ton splitting force, 230 V power supply, and a lightweight, stand-free construction, it is suitable for home, farm, or small commercial use. It is a good choice for: - Owners of wood-heated homes - Fireplace users - Farms preparing their own firewood - Those looking to reduce manual wood splitting - Smaller companies and sites with regular firewood needs - Users seeking a log splitter that is easier to store than stand versions The CORMAK LUP7TS features a two-hand operation system, enhancing control over the splitting process. The operator must use both hands, minimizing the risk of accidental contact with the working area. An additional safety cover protects the working area. This is especially important for frequent use and for operators who prioritize organized and predictable working conditions. Stepless splitting distance adjustment The splitter offers stepless adjustment of the splitting distance, allowing fine-tuned adaptation for different log lengths. This feature minimizes unnecessary movement and streamlines the preparation of logs, which is particularly useful for uniform firewood for stoves, fireplaces, or boilers. Standard equipment includes: - CORMAK LUP7TS hydraulic log splitter - Stand with wheels - Hydraulic cylinder with automatic return - Two-hand operation system - Safety cover for the working area - Receiving table for logs - Stable splitting blade - 230 V / 2200 W motor - Powder-coated steel construction Technical Specifications CORMAK LUP7TS: Splitting force: 7 T Maximum log diameter: 250 mm Maximum log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Chedpfx Aszarv Asa Dsa Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years

Būklė: naujas, Gamybos metai: 2026, Precise and efficient industrial pipe bending machine for bending steel, copper, aluminium, and brass pipes. The option to select the optimal bending radius allows for high-quality results without material deformation. This bender is very user-friendly. Pipe benders are used for single-piece and small-batch production of parts in the automotive, furniture, architectural, and garden tool manufacturing industries. The main bending die is driven by a reduction gearbox and an electric motor. The machine operates in two modes: manual and semi-automatic. Its uncomplicated and robust design ensures long-lasting, trouble-free operation and guarantees ease of use. Standard equipment: Cjdpfxsvugv Ae Aa Doha - Digital angle readout - The BENDMASTER machine is equipped with dies for pipes with diameters: 38.1; 48.3; 70 mm Technical specifications: - MAXIMUM DIAMETER OF BENT PIPE: 70x5 mm - MAXIMUM DIMENSION OF BENT SQUARE PROFILE: 50x50x2 mm - MAXIMUM BENDING ANGLE: 270° - DIE ROTATIONAL SPEED DURING BENDING: 1.2 rpm - DIE ROTATIONAL SPEED DURING RETURN: 2.4 rpm - MAIN MOTOR POWER: 5 kW - EXTERNAL DIMENSIONS: 1300x700x900 mm - WEIGHT: 680 kg For more information, feel free to contact us by phone or email. Please visit our website to view our full offer.

Būklė: naujas, Gamybos metai: 2026, CORMAK HK25L VARIO is a compact milling and drilling machine designed for versatile applications. Ideal for both hobbyists and professionals, this machine not only boasts compact dimensions, but also exceptional functionality. Equipped with an MK3 spindle taper, it ensures machining stability and precision. The digital spindle speed readout enables precise process control, guaranteeing excellent results. Machine features: - Digital spindle speed readout - Digital drilling depth readout - Stepless speed adjustment - Precisely mounted spindle - Automatic feed included Chodpfx Aetz Sx Eja Dea Technical specifications: DRILLING CAPACITY 20 mm END MILLING CAPACITY 16 mm FACE MILLING CAPACITY 63 mm SPINDLE TAPER MK3 SPINDLE TRAVEL 50 mm SPINDLE SPEED SETTINGS variable SPINDLE SPEED RANGE 50–2250 rpm TABLE WORKING SURFACE 700 x 180 mm MAXIMUM LONGITUDINAL TABLE TRAVEL 480 mm MAXIMUM CROSS TABLE TRAVEL 175 mm MAXIMUM VERTICAL HEAD TRAVEL 280 mm NUMBER OF T-SLOTS 3 T-SLOT DIMENSIONS T12 / 12 mm MOTOR 0.75 kW / 1 HP 230V DIMENSIONS 980 x 600 x 1010 mm WEIGHT 110 / 125 kg