Romer/System Malowania Elektrostatyczneg Miltelių Dengimo Krosnis pirkti naudotą (38 728)

Gamybos metai: 2020, būklė: naujas, ROMER® is the largest manufacturer of powder coating equipment in Poland and one of the largest in Europe. ROMER® consists of over 10,000 manufactured units that are used in more than 45 countries worldwide. ROMER® produces individual technological devices for powder coatings as well as complete, fully automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for the equipment we sell, with a full range of spare parts available. Hodpfxsfzq Ryo Admsnk

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Hnodpfxsfz Aw Ho Admsk Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection Hnsdpfxsfz A Ile Admok The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, The company ROMER is also involved in the production of overhead conveyor systems. Cross transfers (cross transports) are designed and manufactured for specific installations. Examples of such equipment are listed below: conveyor systems. Depending on customer requirements, the conveyor systems can move on the ground or be suspended from rails. - For efficient solutions in manual installations, we recommend suspended crossbeams (cross transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and offer an excellent solution for companies focused on quality and process repeatability. Hnedpfx Adefz Difomsk - For companies that manufacture different products simultaneously and, for example, operate multiple booths with different colors, flexible solutions using a non-powered conveyor are implemented. This is the most expensive option.

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging Hjdpfx Asfz Dknedmenk • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, ROMER manipulators are distinguished by their quiet operation. They can be programmed for both simple, widely-used, as well as complex multidimensional processes using PLC control. They are suitable for both long and short stroke operations. The toothed belt drive ensures quiet operation. The maintenance-free AC motor and the slim column design provide space-saving installation. The robust construction of the manipulators offers extensive capabilities and high stability. The manipulator is equipped with a 7" touch panel or can be externally controlled via the ModBus protocol with RJ45 cables. Hnjdpfofz Dmmox Admjk

Gamybos metai: 2020, būklė: naujas, DESCRIPTION The demineralized water station is used for the production of so-called demineralized water using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Hedpfx Adsfz Dwzsmsnk Our demineralization stations of the RDI-2 / RDI-4 type are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning Hnsdpfx Asfz I Rmjdmok • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs Hedpfx Adsfz I R Rjmsnk • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Hnedpfefz I Sgex Admek Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free Hjdofz U Rrjpfx Admjnk

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Hjdjfzktzspfx Admenk Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity: 6-7 kg • Air consumption during coating: 15 Nm³/h • Air consumption during cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description Hjdpfsfz Dkgex Admonk • RP-01 pump for refilling with fresh paint from cartons • Two operating modes: color recovery with mixing or total waste • Sealed, fluidized paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refilling with paint from cartons • Paint level sensor in refill box • An acoustic alarm warns the operator when the carton paint supply is low • Center is connected to the booth control via ModBus protocol • Programmable powder suction valve keeps the powder center clean

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with an efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the filter media used is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter exchange Hedpfx Asfz Dqfsdmonk • Each filter has its own solenoid valve

Gamybos metai: 2020, būklė: naujas, Ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings. Materials ROMER ultrasonic cleaning systems are constructed using stainless steel, providing protection against acids. The tanks feature additional insulation walls to prevent heat loss and ensure faster heating. High-quality materials guarantee a long service life of the vibrating components. Heating System The ROMER bath heaters are made of premium materials and high-temperature resistant ceramic elements. The heating system delivers high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic Transducers The ultrasonic elements used in ROMER cleaning machines are installed in submersible modules, which better reflect the vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the component being washed. Lower frequencies are used for large, high-strength parts, while higher frequencies suit jewelry, delicate mechanical systems, and similar applications. All transducers are connected using high-temperature resistant cables. Hedpefz Dtzofx Admsnk

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. Hjdpfxofz Dvvj Admenk High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, DESCRIPTION The so-called semi-demineralized water is produced by the demineralized water station using ion exchange technology. Hnodpfx Aefz I Nhjdmjk The station consists of 3 columns: - Strongly acidic cation exchanger in the sodium cycle - Strongly basic anion exchanger operating in the chloride cycle - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Gamybos metai: 2020, būklė: naujas, DESCRIPTION The so-called semi-demineralized water station is produced from the demineralized water station using ion-exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle - Strongly basic anion exchanger operating in the chloride cycle - Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Columns are made of AISI316L steel. Hjdpjfz I Sysfx Admonk

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Hedpfxofz Ndyo Admonk Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. Hodpeflmdbsfx Admonk • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Prices are specified in the catalog.

Gamybos metai: 2020, būklė: naujas, Automation Use of a photoelectric cell The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece, giving you the capability to activate the spray guns only when the object is within range, and to deactivate the guns immediately after processing is complete. The photoelectric cell is included in the standard equipment package. Identification of parts using special tags. A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, identifies the coated part, activates or deactivates the guns at the correct time, thereby reducing energy and powder consumption. Vertical detection of workpiece features. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the timing for when the part is due to appear in the gun area, allowing for selective activation or deactivation of the guns. Use of light barriers with multiple horizontal and vertical sensors. This solution enables precise measurement of the dimensions of the workpiece, allowing manipulators to be adjusted as well. Advantages of using gates and photoelectric cells The main advantages of using photoelectric cells or light barriers are energy and powder savings. It eliminates coating zones without workpieces. By using light barriers, precise gun control is achieved. Our lines can optionally be equipped with photoelectric cells or light barriers. The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece and, therefore, to activate spray guns only when the object is within their operational range, and to deactivate the gun immediately upon completion of coating. Identification of parts with special tags A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, recognizes the coated part, switching the guns on or off at the appropriate time – thereby saving energy and powder. By using light barriers with horizontal detectors, the PLC can analyze the vertical geometry of the workpiece. The PLC determines when the part will appear in the gun chamber, enabling selective activation or deactivation of the spray guns. Use of light barriers with multiple horizontal and vertical sensors This solution allows for the precise measurement of the workpiece's dimensions, enabling adjustment of the manipulators. The primary benefits of using photoelectric cells or light barriers are powder and energy savings. It eliminates painting areas without workpieces. Using light barriers ensures precise gun control. Vertical array of spray guns 8 pcs. guns Control – profiControl 10" Cyclone – CK-D1250 Dust collector – OZ-8H Center – RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Axis X MX-100 x 2 pcs. Horizontal gate – Horizontal gate W400 x 2 units Vertical gate – H2000 vertical gate Hjdsflq Spopfx Admonk The maximum coating speed is 1.65714285714286 m/min 0 pcs. tractors Air volume required: 10,188 m³/h for operation Minimum cabin passage required: W900mm H2100mm Duct diameter 500 mm – minimum 16.9 m/s 16 m/s Air consumption: 1210 l/min + Sug. SC-20 compressor Min. St

Gamybos metai: 2020, būklė: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. Hnodpjfy T Szofx Admsk • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Prices are specified in the catalog.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Hsdjfz Ax Sopfx Admonk Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, The company ROMER is also involved in the production of suspended transport systems. Cross traverses (cross conveyors) are designed and manufactured for specific installations. Examples of equipment are listed below: transport systems. Depending on customer requirements, the transport systems can operate on the floor or be suspended from rails. Hodpofz Dibsfx Admonk - For convenient solutions for manual operations, we recommend suspended cross beams (cross conveyors). - In automated systems, chain conveyors are most frequently used; these operate continuously and represent an excellent solution for companies focusing on process quality and repeatability. - For companies that produce different items simultaneously, such as operating several booths with different colors, flexible solutions using non-powered conveyors are implemented. This is the most expensive option.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. Hedsfz Dt Njpfx Admsnk All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.