Robopac Helix Hs40 pirkti naudotą (154)

Būklė: naudotas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool mounting length, tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 – 44 – 95 – 190 rpm Hydraulic motor power: approx. 3 kW Roll drive motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling Iodpfxeh A S Hte Aqrjba - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic system integrated in the machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools, with the same pitch as the workpiece, form the thread by penetrating the workpiece up to nominal diameter. The thread length can be at most as long as the thread rolling tools are wide. Through-feed Rolling: Used when the thread length is greater than the width of the thread rolling tool. Through-feed tools have three zones—the lead-in, the calibration section, and the lead-out. Grooving rolls have no pitch and are swiveled according to the thread angle of the profile to be rolled. Lead Rolls: These differ from grooving rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the pitch angle on the workpiece.

Būklė: naudotas, Gamybos metai: 2010, Swing diameter 440 mm Max. turning diameter 220 mm Turning length 450 mm Travel path - X 200 mm Control Fanuc 18i-TB Max. slant angle 60° Spindle bore 64 mm Tool holder VDI 30 Number of tool positions in turret 12 CNC lathe | COLCHESTER - TORNADO T6MS equipped with sub-spindle and chip conveyor. Ibedpevzcplofx Aqrja The machine is in well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Būklė: naudotas, Gamybos metai: 2010, Pavarotas Tetra Pak Helix akumuliatorius, 47 m, pagamintas 2010 m. Iedpsv Dab Rjfx Aqrsba Pavarotas Tetra Pak Helix akumuliatorius, 47 metrų ilgio, pagamintas 2010 m., optimizuoja talpyklų srautą aukštos pajėgos buteliavimo linijose. Jis efektyviai subalansuoja gamybos liniją, užtikrindamas nuolatinį judėjimą tarp skirtingų mašinų. Dėl to sumažėja prastovos ir padidėja bendras gamyklos našumas. Be to, tokiu būdu pagerinama veikimo pastovumas ir bendras efektyvumas. Tetra Pak – pasaulinė buteliavimo ir pakavimo sprendimų lyderė – sukūrė ACHX 30 modelį su ypatingu patvarumu ir patikimumu. Ši spiralės formos konstrukcija kompaktiškai ir efektyviai akumuliuoja talpyklas, sumažindama užimamą plotą. 47 metrų bendras ilgis leidžia valdyti didelius talpyklų kiekius, užtikrinant nuolatinį srautą net ir keičiant formatus ar atliekant techninę priežiūrą linijos pradžioje arba pabaigoje. Taip garantuojamas našus darbas be nereikalingų pertrūkių. Tetra Pak Helix akumuliatoriaus veikimas ir techninės charakteristikos Tetra Pak Helix akumuliatorius sklandžiai transportuoja talpyklas spiraline sistema, todėl išvengiama butelio užsikimšimų ar gaminio pažeidimų. Spiralės konfigūracija tolygiai paskirsto apkrovą, palaikant pastovų srautą – tai ypač svarbu didelio greičio buteliavimo linijose, kur pertrūkiai gali lemti produktyvumo nuostolius. Technikai peržiūrėjo ir atnaujino pavarotą Tetra Pak Helix akumuliatorių (47 m, 2010 m.), užtikrindami patikimą veikimą ir atitiktį galiojančioms saugumo normoms. Nors šis įrenginys laikomas sandėlyje, jis yra paruoštas iškart integruoti į naują gamybos liniją. Apžiūra apėmė svarbiausius komponentus: variklius, konvejerių juostas ir daviklius. Tokia nuodugni priežiūra garantuoja ilgalaikį ir našų veikimą, o tuo pačiu sumažina mechaninių gedimų riziką. Integracija į buteliavimo linijas ACHX 30 modelis lengvai integruojamas į įvairias buteliavimo linijos konfigūracijas. 47 metrų ilgio spiralė užtikrina didelę akumuliavimo talpą, taip sumažindama netikėtų stabdymų įtaką žemiau esančioms mašinoms. Dėl to likusi linijos dalis veikia be trikdžių, maksimaliai padidindama efektyvumą ir sumažindama prastovas. Šis Tetra Pak Helix akumuliatorius intelektualiai reguliuoja srautus ir palaiko nuolatinį gamybos tempą. Tai užtikrina minimalų apkrovos kitimą užpildymo ir pakavimo mašinoms, prailgina mechaninių komponentų tarnavimo laiką, sumažina priežiūros kaštus, bet kartu išlaiko aukštą produktyvumą. Be to, energijos sąnaudos yra optimizuotos, todėl valdymo kaštai sumažinami. Išvada: Tetra Pak Helix akumuliatorius Pavarotas Tetra Pak Helix akumuliatorius, 47 m, 2010 m., efektyviai optimizuoja buteliavimo linijų talpyklų srautą. Atlikus pilną techninę priežiūrą ir dėka pažangių techninių sprendimų, šis įrenginys užtikrina sklandų ir saugų talpyklų kaupimą. Pastoviai didinamas bendras gamyklos efektyvumas. Dėl didelio našumo ir išlaidų efektyvumo šis modelis yra strategiškai vertingas šiuolaikinėse buteliavimo gamyklose, suteikdamas patikimą sprendimą didelės talpos gamybos linijoms.

Būklė: naujas, Load capacity 250 kg Isdpfx Aqonlb Rwereba Number of suction pads 6 Diameter of suction pads 215 mm Vacuum Lifter VH 6-250 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing frame made of steel, painted in RAL 2000, with low self-weight. Consisting of: - 1x Galvanized longitudinal beam, 2,400 mm long - 3x Galvanized cross beams, each 1,000 mm long - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction pads Ø 215 mm; in case of wear, the seal can be replaced separately from the metal carrier easily and cost-effectively without tools - 6x Ball valves to deactivate individual suction pads, allowing smaller formats to be lifted without needing to move suction pads or beams. - 1x Small spiral connection cable: * Extendable up to 3,500 mm, designed as an extension cable with CEE plug and coupling. * Routed alongside the load chain to the lifting device. - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). With isolation transformer integrated in the control panel (required if the vacuum lifter is connected via the crane carriage and there is no neutral conductor available). - Extendable operating handle up to 1,000 mm from the center of the beam. Stable sheet metal box for your crane controls included at no extra cost. - Operation "Suction / Release" via hand-operated slide valve: The wear-free and robust hand-operated slide valve ensures safe suction and release after activating the unlocking button (double release in compliance with EN 13155) - Control and safety devices for vacuum lifter: * Sturdy control box * Contactor control for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-activation process for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation Warranty: one year on material and manufacturing defects for single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE declaration of conformity- according to EN 13155 - Packaging suitable for truck transport.

Būklė: naujas, Load capacity: 1000 kg Number of suction pads: 8 Diameter of suction pads: 280 mm Iedpfx Ajnlb Rzsqroba Vacuum Lifter VH 8-1000 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing construction made of steel, painted in RAL 2000 with low dead weight. Comprises: - 1x Galvanized main beam, length 2,400 mm - 4x Galvanized cross beams, each 1,000 mm long - 8x Spring-loaded, articulated, and adjustable suction pad holders - 8x Suction pads, Ø 280 mm; the seal can be replaced separately from the metal carrier in case of wear, cost-effectively and without tools - 8x Ball valves for shutting off individual suction pads, allowing smaller formats to be handled without needing to move suction pads or beams - 1x Spiral connection cable, small coil: * with a pull-out length of 3,500 mm, designed as an extension cable with CEE plug and coupling * guided alongside the load chain to the lifting device - Low-maintenance, high-quality, oil-lubricated rotary vane vacuum pump with a suction capacity of 21 m³/h and a final vacuum of 98% (20 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). With isolation transformer integrated into the control system (necessary when connecting the vacuum lifter via the trolley of the crane and no neutral conductor is available) - Extendable operator handle to 1,000 mm from beam center - Robust sheet metal holder for your crane control included at no extra charge - Operation “Suction / Release” via manual slide valve: The wear-free and very robust manual slide valve ensures safe suction and release after pressing the release button. (Double release according to EN 13155) - Control and safety equipment for vacuum lifter: * Sturdy control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic signal * Vacuum gauge with danger zone display * Large vacuum accumulator tank with safety check valve * Double actuation for releasing the load - Fine dust filter to protect the vacuum pump - Detailed and easy-to-understand documentation Warranty against material and manufacturing defects: one year for single-shift operation (excluding wear parts). Initial inspection according to UVV 18, VBG 9a, with CE Declaration of Conformity as per EN 13155 - Packaging suitable for truck transport.

Būklė: naujas, Load capacity 500 kg Number of suction pads 6 Diameter of suction pads 215 mm Vacuum Lifter VH 6-500 for horizontal transport of smooth, dry, and airtight panels. Robust load-bearing construction made of steel, painted in RAL 2000 with low dead weight. Comprising: - 1x Galvanized longitudinal beam with a length of 2,400 mm - 3x Galvanized cross beams with a length of 1,000 mm each - 6x Spring-loaded, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the seal can be replaced separately from the metal carrier, cost-effectively and without tools - 6x Ball valves to shut off individual suction cups, allowing for the lifting of smaller panels without having to move cups or beams - 1x Spiral connection cable, small coil: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling * routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control panel (necessary if the vacuum lifter is powered via the crane’s trolley and there is no neutral conductor) - Operating handle extendable to 1,000 mm from the center of the beam. Stable metal pocket for your crane control unit included at no extra charge. - Operation "Suction / Release" via manual slide valve: The wear-free and very robust manual slide valve ensures safe suction and release upon activation of the release button. (Double release according to EN 13155) - Control and safety devices for the vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning system with acoustic signal annunciator * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release for unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation Warranty against material and manufacturing defects for one year in single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE certificate of conformity according to EN 13155 Iodpfxjq Sc Auj Aqrjba - Packaging suitable for truck transport.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, ratlankio skersmuo: 275 mm, ratlankio plotis: 150 mm, X ašies eiga: 640 mm, Y ašies eiga: 870 mm, ruošinio skersmuo (maks.): 275 mm, TECHNICAL DETAILS Wheel diameter: 275 mm Wheel width: 150 mm Max. module: 6 Min. module: 1.5 Workpiece diameter: 275 mm Iedpfx Aqsywgy Serjba Max. face width: 5.5 mm Helix angle: 0 - 60° Number of teeth: 5 - 120 Min. transmission ratio: 1:1 Max. transmission ratio: 1:10 Milling Depth Axis (X Axis) Travel: -25 to 640 mm Max. rapid traverse: 6 m/min Workpiece Positioning Axis (Y Axis) Travel: 870 mm Max. rapid traverse: 4.5 m/min Axis Offset (Z Axis) Travel range: +/- 50 mm Max. rapid traverse: 0.657 m/min Generating Rotation Axis (A Axis) Swivel range: 315° Max. swivel speed: 40°/s Workpiece Spindle (B Axis) Max. spindle speed: 300 rpm External taper (1:4) mounting diameter: 140 mm Internal taper (1:20): 99.218 mm Workpiece spindle bore: 90 mm Workpiece Swivel Axis (C Axis) Swivel range: -8.5 to 98° Max. swivel speed: 21.5°/s Tool Spindle (D Axis) Tool spindle speed: 60 to 350 rpm Tool Positioning Axis (E Axis) Swivel range: 0 to 360° Max. swivel speed: 19.5°/s Machine Distance (V Axis) Travel: 150 mm Max. rapid traverse: 1.6 m/min MACHINE DETAILS Cutter drive motor Power: 20 kW Workpiece drive Power: 14.5 kW Total connected load: 62 kVA Dimensions & Weight Machine weight: approx. 12 t Space required: approx. 4,700 x 4,387 x 2,450 mm EQUIPMENT 13 cutters

Būklė: naujas, Load capacity 500 kg. Number of suction pads: 6 units Suction pad diameter: 215 mm Suction performance: 8.0 m³/h Crane lifting eye: 80.0 mm Voltage: 400 V Ibodpfx Aqexak Ddjrea Total power consumption: 0.18 kW Machine weight approx. 120 kg Space requirement approx. 2400 x 1100 x 584 mm Equipment: - For horizontal transport of smooth, dry, and airtight panels - Robust load-bearing structure made of steel - Painted in RAL 2000 with low dead weight - Galvanised longitudinal beam, length: 2,400 mm - 3x galvanised crossbeams, each 1,000 mm long - 6x spring-loaded, articulated, and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, high-quality dry-running rotary vane vacuum pump - Suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Extendable operating handle to 1,000 mm from centre of beam - Stable metal pocket for your crane control unit - Operation "Suction/Release" via manual slide valve - Control and safety device for vacuum lifter * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release function - Fine dust filter for vacuum pump protection - Documentation * Special accessories included: - 6x ball valves for individually disabling suction pads * Allows handling of smaller panel formats * Without the need to move suction pads or beams - Small spiral connection cable * Extension length 3,500 mm, designed as * Extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device

Būklė: geras (naudotas), Gamybos metai: 1998, Spindle diameter: 90 mm Control system: Siemens SINUMERIK 840 C Operating voltage: 400 V Stroke position adjustment: 100 mm Table bore: 150 mm Stroke rate: 100–1200 strokes/min Machine weight: approx. 8.0 t Key data Normal module: 6 mm Max. workpiece pitch diameter: 250 mm Max. gear width (straight toothing): 60 mm Helix adjustment: 45° to +0.5° Axis angle: 0° to 90° Isdpfx Aqoxyadtorjba Center distance workpiece/ram spindle: –80 mm to +320 mm Stroke position & length Max. stroke position range (depending on stroke length): 0 mm to 80 mm Stroke position adjustment range: 0 mm to 80 mm Stroke drive Infinitely variable stroke rates, standard: 100 to 1200 DH/min Stroke drive motor: 9 kW Maximum cutting speed: 150 m/min Feeds Rotary axes (tool C1, workpiece C2 axis): stepless feed, based on 100 mm pitch diameter: 1.0 to 9420 mm/min Radial axis (column slide X1 axis): stepless feed: 1.0 to 9420 mm/min; rapid traverse equals maximum feed rates Connected load / Weight Total connected load: 26 kVA Total weight (standard version): approx. 9,000 kg

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), bendras svoris: 13 000 kg, bendras plotis: 6 670 mm, gaminio ilgis (maks.): 7 700 mm, veleno greitis (maks.): 500 aps./min, ašių skaičius: 4, Šios 4 ašių "Holroyd 3EX-R" CNC rotorių profilių frezavimo staklės pagamintos 1999 m. Didžiausias apdirbamos detalės skersmuo yra maždaug 350 mm, o ilgis - 1550 mm, todėl ji tinka labai tiksliam rotorių ir velenų apdirbimui. Jei ieškote aukštos kokybės frezavimo galimybių, apsvarstykite mūsų parduodamas "Holroyd 3EX-R" stakles. Susisiekite su mumis dėl išsamesnės informacijos apie šias stakles. • Mašinos tipas: Holroyd 3EX-R CNC rotorių gamybos centras • Didžiausias apdirbamas skersmuo: 350 mm • Mažiausias apdirbamas skersmuo: 100 mm Iodpfjyxpyqjx Aqrsba • Didžiausias ilgis (nuo darbinio veleno laikiklio iki galinio staklių centro): 1550 mm (ilgis nuo darbinio veleno iki galo) • Didžiausia darbinės galvutės pavarų dėžės eiga: 1160 mm Didžiausias galimas darbinio veleno sukimo mechanizmo ilgis: 1160 mm • Didžiausias ilgis (nuo darbinio veleno snapelio iki pjovimo veleno centro linijos): 1,5 mm: 1363 mm (ilgis (ilgis iki galo) • Mažiausias atstumas (nuo darbinio veleno nosies iki pjovimo veleno centrinės linijos): 1363 mm: 203 mm. • Didžiausias atstumas (nuo darbinio veleno vidurio linijos iki pjovimo veleno vidurio linijos):: 460 mm (ilgio (didžiausias darbinis atstumas) • Mažiausias atstumas (nuo darbinio veleno centrinės linijos iki pjovimo veleno centrinės linijos): 460 mm: 160 mm (kraštinė (vidurio ilgis) • Įvadų diapazonas: 10-2000 mm • Padavimo greičių diapazonas (išilgai spiralės): 25-1000 mm/min. • Greita eigos sparta (skersinė eiga): 10 000 mm/min. • Greita eigos sparta (padavimas): 4 000 mm/min. • Darbo galvutės suklio greitis: 0,5-5 aps/min. • Galinio tekinimo staklių plunksnos eiga: 150 mm • Frezos suktuvo sukimosi greičių diapazonas: 50-500 APS/MIN. • Didžiausias frezos skersmuo: 400 mm • Rekomenduojamas frezos skersmuo: 400 mm: Rekomenduojamas frezos skersmuo: 250 mm • Didžiausias pjaustytuvo plotis: 160 mm Didžiausias galimas kirpimo įrankio skersmuo • Frezos suklio sąsaja: ISO 50 B tipo ("ANSI") • Pjovimo veleno kampo nustatymas nuo horizontalės: $0\pm55^{\circ}$ • Padavimo padėties pasikartojimas: 0,005 mm • Mašinos dalijimo tikslumas (250 dia): 0,010 mm. • Mašinos šoninis tikslumas (300 mm): 0,010 mm. • Pjoviklio pavaros variklio galia: 63 KW (1500-2500 aps./min.) • Apytikslis svoris (tik staklės): 13,000 kg • Apytikslis grindų plotas: 7 700 $ x 6 670 $ mm • Electrical Supply: (nuokrypis ne daugiau kaip +/- 6 % nuo nominaliosios vertės) • Įeinančios funkcijos: Įranga: Frezavimas pakopomis, Daugelio eigų frezavimo ciklas, Kūginis pjovimas, Volframo karbido frezų įranga, Hidraulinis galinis frezavimo įrenginys, Recirkuliacinis filtravimo įrenginys, Automatinė tepimo sistema, Kalibruoti recirkuliaciniai rutuliniai švininiai sraigtai, Mašinos apšvietimas, Valdymo spinta su oro kondicionieriumi • CNC valdymas: "Holroyd" sukurta uždarojo ciklo sistema su 3,5 colio disko laikikliu ir automatine diagnostika.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2023, veikimo valandos: 150 h, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 230 mm, matavimo diapazonas Y ašis: 230 mm, matavimo diapazonas Z ašis: 550 mm, ruošinio svoris (maks.): 300 kg, tuščias svoris: 2 550 kg, TECHNICAL DETAILS Workpiece Data Module range: min. 0.3 mm - max. 20 mm (0.1 - 20 mm) Helix/lead angle: min. 0° - max. 90° Test diameter gears between centers: max. 400 mm Workpiece diameter: max. 490 mm Vertical measuring range (Z-axis): 550 mm (700 mm) Horizontal measuring range / traversing path (X-axis): ± 115 mm Permissible moment of inertia: max. 5 kg m² Permissible workpiece weight: max. 300 kg Center distance: min. 50 mm - max. 800 mm (50 - 1,000 mm) Chart Recording Isdoxamnropfx Aqroba Magnification: 50x / 100x / 200x / 500x / 1,000x / 2,000x / free input possible Longitudinal magnification: 0.5x - 1x - 2x - 4x - 5x - 10x - 20x Machine Accuracy VDI/VDE 2612 Parts 1 and 2 as well as 2613 Group I at +18 °C to +22 °C, reference temperature 0.5 K/h; 2 K/d; 2 K/m MPEE0 ISO 10360-2 (2010): 1.8 + L/450 mm VDI2631 Radial guideway deviation: 0.2 µm Roundness Ø100/L: 0.3 µm Flick 15W/U/L: 1.5 µm Flick 50W/U/L: 1.5 µm Straightness Ø70/L: 0.4 µm Coaxiality: 1.2 µm Total runout: 1.5 µm Machine Accuracy at +15 °C to +35 °C Reference temperature: 2 K/h; 12 K/d; 2 K/m MPEE0 ISO 10360-2 (2010): 1.8 + L/250 mm VDI2631 Radial guideway deviation: 0.4 µm Roundness Ø100/L: 0.5 µm Flick 15W/U/L: 1.8 µm Flick 50W/U/L: 1.8 µm Straightness Ø70/L: 0.6 µm Coaxiality: 1.4 µm Total axial runout: 1.8 µm Evaluation Software Spur gears – external and internal helical gearing up to 60° Standards: DIN 3960 / 3962, free tolerances, AGMA 2015, ANSI B92.1, DIN 5480, ISO 1328:1995, JIS B1702:1998, JIS B1702:2016, GBT 10095:2008, ISO 1328:2013 Functions: Profile and flank line, tooth thickness variation, pitch and two-ball measurement, crowning, bevel, trapezoidal, and bevel gear teeth Root and tip circle measurements, determination of tip and root diameter across up to six teeth or up to four teeth on three measuring heights or all teeth at a single height on a special measuring sheet Gear Measurement Contact pattern measurement: 3 x profile and 3 x flank line Topography: 10 profiles x 10 flanks (30 x 30 grid points) Measurement of all teeth on a separate special measuring sheet Block gear measurement: up to 10 gearings Alignment measurement: up to six gearings and determination of apex point Storage formats: ASCII format, ASCII mka file, ASCII csv file (grid point deviation) Storage capacity: up to 5,000 workpiece measuring programs MACHINE DETAILS Net weight incl. standard accessories: approx. 2,150 kg Net weight with active vibration damping: approx. 2,550 kg EQUIPMENT - PC with software installed (currently on machine) - Probes and extensions included - 2x calibration spheres - Surface roughness reference standard - 2x 3-jaw chucks for different diameters - 1x mandrel for aligning upper and lower measuring points - Stand for dial indicator - Driver fixture for a broader range of parts - Transport locks

Būklė: naujas, darbinis plotis: 85 000 mm,

Būklė: naudotas, Gamybos metai: 2002, Wheel diameter - max. 275 mm Module - max. 6 Module - min. 1.5 Control system: SINUMERIK 840 C Gear width: 5.5 mm Helix angle min. 0° / max. 60° Number of teeth - max. 120 Number of teeth - min. 5 Gear ratio max. 1:10 Gear ratio min. 1:1 Workpiece spindle speed max. 110 rpm Cutter head speeds: 20 - 110 rpm Total connected load: 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.20 x 2.30 x 2.40 m Integrated deburring unit, U-axis / Q-spindle Ibsdpfx Aqevxwnwjrsa Chip conveyor Coolant system Electrostatic air cleaner: ELBARON No tools included No workpiece clamping device

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, stalinis gręžtuvas: 80 mm, stalo skersmuo: 145 mm, krumpliaračio skersmuo: 125 mm, valdiklių gamintojas: Siemens, valdiklio modelis: SINUMERIK 840 D, TECHNINĖS DETALĖS Maksimalus ratlankio skersmuo: 125 mm Maksimalus modulis: 3 Maksimalus dantų pločio plotis (cilindrinėms krumpliaračiams): 24 mm Ašių atstumas: nuo -25 iki +180 mm Didžiausias pasukimo kampas: 12° Didžiausias nuolydžio kampas: 45° Stalas Stalo skersmuo: 145 mm Stalo skylė: 80 mm Reguliuojamas stalo sukimosi greitis: 0,03 – 50 aps./min. Smūgio velenas Dvigubų smūgių skaičius: 1.500 – 3.000 dvigubų smūgių/min. Smūgio vietos reguliavimas: 70 mm Min./maks. smūgio eiga: 0 – 30 mm Smūgio veleno skersmuo: 85 mm Pjovimo galvutės laikiklio jungtis: HSK 80 B Įrankis ir ruošinys Įrankio dantų skaičius: 1 – 200 Minimalus įrankio modulis: 0,05 Ruošinio dantų skaičius: 1 – 1.500 Ibodpsxf Azxefx Aqrja Minimalus ruošinio modulis: 0,05 Valdymas Valdymo sistema: SINUMERIK 840 D MAŠINOS DETALĖS Elektriniai duomenys Variklio galia: 7,5 kW Bendras energijos poreikis: 30 kVA Svoris ir matmenys Mašinos svoris: apie 8 t Užimama vieta: apie 4,3 × 2,8 × 2,9 m ĮRANGA Griebtuvas su 4 padėtimis, pasukamas Automatinė ruošinių keitimo įranga Linijinė ruošinių juosta

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, stalinis gręžtuvas: 80 mm, stalo skersmuo: 145 mm, krumpliaračio skersmuo: 125 mm, valdiklių gamintojas: Siemens, valdiklio modelis: SINUMERIK 840 D, TECHNICAL DETAILS Working Area Maximum wheel diameter: 125 mm Maximum module: 3 Maximum face width (spur gears): 24 mm Centre distance: -25 to +180 mm Maximum swivel angle: 12° Maximum inclination angle: 45° Table Table diameter: 145 mm Isdpfowyn Amox Aqrsba Table bore: 80 mm Infinitely variable table speeds: 0.03 – 50 rpm Shaping spindle Number of strokes (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaping spindle diameter: 85 mm Cutter arbor interface: HSK 80 B Tool and Workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control system: SINUMERIK 840 D MACHINE DETAILS Electrical data Drive power: 7.5 kW Total connected load: 30 kVA Weight and Dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Rotatable counter holder with 4 positions Automatic workpiece change device Linear workpiece conveyor

Būklė: naudotas, Gamybos metai: 2012, Wheel diameter - max. 300 mm Wheel width 320 mm Module - max. 10 Module - min. 0.5 Helix angle - max. 45° Frequency 50 Hz Voltage 400 V Main fuse 125 A X-axis 270 mm Y-axis 250 mm Z-axis 320 mm A-axis +/- 45° B-axis 360° C-axis 360° Total power requirement 89 kW Machine weight approx. 23.5 t Space requirements approx. 11.2 x 5.5 x 2.9 m Automated Oil centrifuge station EWAB workpiece storage system Hoffmann coolant filtration unit HSF 100 SE/K Isdpfsx R U Hasx Aqroba Minimax fire suppression system W+W air filtration system Promot Automation "Cellmaster" (3 cells), year of manufacture 2019

Būklė: naudotas, Gamybos metai: 2006, Ruosių skersmuo: 5–1 000 mm Modulio diapazonas: 0,2–25 Ijdpfjyvvlbjx Aqrsba Nuolydžio kampas: < 90 ° Valdymas: Wenzel GearTec Plokštės, skirtos ruošiniui, skersmuo: 750 mm x ašis: 1 200 mm y ašis: 550 mm z ašis: 1 000 mm Bendra būtina galia: 6,5 kW Staklių svoris apie 11 t Užimamas plotas apie 3,30 x 3,15 x 2,70 m Valdo šias programas: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Būklė: labai geros būklės (naudotas), WSM SZ-250K Feeding Unit The WSM SZ-250K is a feeding unit from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "kurz" (short) and refers to the shortened length of the sorting spiral, which reduces wear caused by fill level and vibrations. Function: This is a feeding device that combines the advantages of bowl feeders with the necessity for clean processes. Feature: The shortened sorting spiral (effective length) is the core innovation to minimize contamination from abrasion. Application area: It is used wherever high cleanliness during feeding is required to ensure clean screwdriving processes. Feeding unit SZ-250K consisting of: - Belt hopper BB-01-B (0.5 l) with level control and dirt stopper - Vibratory bowl feeder WFL 200 IU (200 mm) with singulator - Aluminum frame with Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volt Iodpfx Ajx Elfcoqrsba You will find more new and used items in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), WSM SZ-250K Feed Unit The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The “k” in the model designation stands for “kurz” (short) and refers to the shortened length of the sorting helix, which reduces the generation of abrasion caused by fill level and vibrations. Function: This device is a feeder that combines the advantages of vibratory bowl feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the core innovation to minimize contamination from abrasion. Application Area: It is used wherever high cleanliness is required during feeding to ensure clean screw assemblies. SZ-250K feeding unit includes: - Belt hopper BB-01-B (0.5 l) with fill level control and debris barrier - Spiral feeder WFL 200 IU (200 mm) with separator - Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volt Ibjdjx Elkfspfx Aqrja You will find further items – new and used – in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, TECHNISCHE DATEN. Max. Spannlänge: 90 mm Werkzeug-Spannhöhe mit Kegelschaft: 50 mm Werkzeug-Spannhöhe mit Zylinderschaft: 45 mm Max. Drallwinkel: 45° Anzahl der Spannpositionen: 1 bis 99 Max. Verfahrweg Schlitten: 550 mm Max. Schleifscheibendurchmesser: 350 mm Min. Schleifscheibendurchmesser: 150 mm Schleifscheibendrehzahl (stufenlos): bis 2.700 U/min Ibjdpewwkacofx Aqrsa Schwenkbereich der Schleifspindelachse: 0° bis 15° Vorschubgeschwindigkeit Schleitschlitten (stufenlos): 0,05 bis 16 mm/min (bei 3. und 4. Achse: 0,05 bis 8 mm/min) Werkstückspindelaufnahme: ISO Kegel Nr. 40 Daten zur Schleifscheibe CBN- und Diamant-Topfscheibe: Ø200 mm → min. DFF: 66 (3. Achse), 76 (4. Achse) Ø250 mm → min. DFF: 16 (3. Achse), 26 (4. Achse) CBN-ES Kegelscheibe: Ø200 mm → min. DFF: 50 (3. Achse), 60 (4. Achse) Ø250 mm → min. DFF: 0 (3. Achse), 10 (4. Achse)

Būklė: naujas, Kaeser Membrane Dryer KMM 5 Volumetric flow at dew point reduction from +35°C to +3°C: 0.68 m³/min Volumetric flow at dew point reduction from +35°C to -20°C: 0.4 m³/min Volumetric flow at dew point reduction from +5°C to -20°C: 0.67 m³/min Purge air: 0.1 m³/min Compressed air connection: R ¾ Minimum overpressure: 4 bar Maximum overpressure: 14 bar Compressed air inlet temperature min.: +1°C Compressed air inlet temperature max.: +66°C Width: 133 mm Depth: 133 mm Height: 634 mm Weight: 5.9 kg Purge air stop valve: Yes Helical structure membrane fiber: Yes Outlet silencer: Yes Flow through membrane from inside to outside: Yes From warehouse stock Ijdpevkf Aasfx Aqrsba We are closed for company holidays until 06.01. Your inquiry will be processed afterward. Warranty and returns are excluded for this listing.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Helix/Rapid, Refurbished CNC 084564 control unit BWO 900 Iedpstp Eh Sofx Aqrsba Software version 800138, Booter V12.0 with interface 084539 Function test, endurance test, and stress test performed on BWO test bench. Application: Höfler Helix 400, Helix 700, Rapid I machines. Before delivery, the CNC can be programmed with the appropriate machine data upon request. 2 units available, price upon request.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, veikimo valandos: 2 100 h, Funkcionalumas: visiškai funkcionalus, sriegio ilgis: 880 mm, padavimo ilgis X ašis: 1 000 mm, padavimo ilgis Z ašis: 100 mm, X ašies padavimo greitis: 1 m/min, Y ašies padavimo greitis: 5 m/min, frezos galvos padėtis: Horizontal, swivelling, centro aukštis: 1 060 mm, įvesties srovės tipas: Oro kondicionierius, padavimo variklio galia: 4 000 W, frezos veleno ilgis: 200 mm, veleno skylė: 90 mm, veleno greitis (maks.): 400 aps./min, veleno greitis (min.): 25 aps./min, mandrilo ilgis: 200 mm, tvirtinimo įvorės skylė: 90 mm, spaudos ilgis: 880 mm, ruošinio skersmuo (maks.): 500 mm, Gewinde- und Zahnradfräsmaschine MSZ 5A352ПФ2 Das Modell MSZ 5A352ПФ2 ist eine universelle Gewindefräs- und Zahnradwälzfräsmaschine, ausgelegt für das Bearbeiten von Keilwellen, Schnecken und zylindrischen Zahnrädern durch Fräs- und Wälzfräsverfahren. Die Maschine wurde 1984 hergestellt und ist für industrielle Anwendungen konzipiert, bei denen Zuverlässigkeit, Vielseitigkeit und reproduzierbare Präzision gefragt sind. Die Maschine eignet sich für Werkstücke mit einer maximalen Länge von 1.000 mm und einem maximalen Durchmesser von 500 mm. Die maximale Bearbeitungslänge (Profil-/Gewindefräsung) beträgt 880 mm, das Schneiden von Zahnrädern bis Modul 8 ist möglich – ideal für eine Vielzahl von Gewinde- und Zahnradbearbeitungen. Steigungs- und Gewindewinkel bis 30° können bearbeitet werden, wodurch die Maschine flexibel im Maschinenbau und in der Getriebefertigung eingesetzt werden kann. Die Fräs- und Wälzfrässpindel verfügt über eine Spindelbohrung von 90 mm und ist für Werkzeuge mit einem maximalen Wälzfräserdurchmesser von 160 mm sowie einer maximalen Wälzfräserlänge von 200 mm ausgelegt. Der Drehzahlbereich der Spindel liegt bei 25 bis 400 min⁻¹ und erlaubt somit optimale Schnittbedingungen für verschiedene Materialien und Werkzeuggrößen. Der Hauptantriebsmotor bietet mehrere Leistungs- und Drehzahlstufen (5 / 6,3 / 10 kW bei 750 / 1.000 / 1.500 min⁻¹). Die Maschine ist mit stufenlosen Längs- und Radialvorschüben ausgestattet; der Längsvorschub liegt zwischen 2 und 100 mm/min, der Radialvorschub zwischen 2 und 50 mm/min – für eine präzise Steuerung während der Bearbeitung. Der Fräskopf ist horizontal und schwenkbar, eine exakte Synchronisierung für Gewinde- und Zahnradfräsarbeiten ist gewährleistet. Mit den Abmessungen von ca. 3.100 × 2.270 × 2.100 mm (mit Zusatzaggregaten bis zu 3.540 × 2.515 × 2.100 mm) und einem Gesamtgewicht von ca. 7.890–8.500 kg verfügt die 5A352ПФ2 über eine stabile, schwere Konstruktion, die ausgezeichnete Steifigkeit und Schwingungsdämpfung bietet. Der Antrieb erfolgt über Drehstrom (380 V, 50 Hz), die Maschine ist mit einer Steuerung PU F5007 ausgestattet. Zustand: *Gebrauchtmaschine *Betriebsbereit *Voll funktionsfähig *Betriebsstunden: ca. 2.100 h Lieferumfang: *Kompletter Satz Wechselräder *Technischer Pass (Russisch) *Betriebsanleitung (Russisch) Typische Einsatzbereiche: *Gewindefräsen *Zahnradwälzfräsen (Stirnräder, Schnecken) *Bearbeitung von Getriebekomponenten *Allgemeiner Maschinenbau Ibodpfx Aqjx Unpvsrea *Instandhaltung sowie Klein- und Mittelserienfertigung

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1986, veikimo valandos: 1 200 h, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 520 mm, bendras ilgis: 2 580 mm, bendras plotis: 1 440 mm, ruošinio svoris (maks.): 200 kg, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 1 500 aps./min, padavimo ilgis X ašis: 2 120 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 150 mm, įvesties srovės tipas: Oro kondicionierius, šlifavimo disko skersmuo: 250 mm, bendras svoris: 3 730 kg, šlifavimo ilgis: 280 mm, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 2 600 aps./min, centro aukštis alkūniniame velene: 115 mm, centro aukštis: 115 mm, tvirtinimo įvorės skylė: 55 mm, šlifavimo veleno greitis: 2 600 aps./min, X ašies padavimo greitis: 12 m/min, pasukimo diapazonas: 45 °, X ašies eiga: 2 120 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 150 mm, plotis centre: 280 mm, šlifavimo veleno variklio galia: 3 000 W, stalo ilgis: 2 800 mm, stalo plotis: 250 mm, galia: 6,5 kW (8,84 AG), aukščio reguliavimo tipas: mechaninis, ruošinio skersmuo (maks.): 235 mm, šlifavimo skersmuo: 250 mm, įėjimo dažnis: 50 Hz, disko skersmuo: 250 mm, įėjimo įtampa: 380 V, reikalingas plotis: 1 440 mm, vietos reikalavimas ilgis: 2 580 mm, reikalingas aukštis: 1 520 mm, šlifavimo rato greitis: 2 100 aps./min, atstumas nuo stalo iki veleno centro: 362 mm, įrankio skersmuo: 235 mm, ruošinio ilgis tarp centrų: 280 mm, atstumas tarp centrų: 280 mm, Hobel-Schleifmaschine 33C (ZZS) 3A662 (Zahnradwälzfräser-Schleifmaschine) Das Modell 3A662 von 33C (ZZS) ist eine spezialisierte Hobel-Schleifmaschine zur präzisen Schärfung und Nachschleifen von Wälzfräsern und zahnradbearbeitenden Werkzeugen. Hergestellt von 33C (ehem. Sowjetunion), ist diese Maschine für den industriellen Werkzeugebau sowie für Getriebefertigungen ausgelegt, die zuverlässige Präzision und reproduzierbare Schleifqualität erfordern. Die Maschine eignet sich zum Schleifen von Wälzfräsern mit einem maximalen Durchmesser von 235 mm und einer maximalen Länge von 280 mm. Sie unterstützt Werkzeuge mit 4 bis 30 Nuten und erlaubt das Schleifen gerader und schrägverzahnter Nuten im Steigungswinkelbereich von 0° bis 45°, womit ein breites Spektrum an Verzahnungsanwendungen abgedeckt wird. Die Schleifspindel ist für Schleifscheiben mit Durchmessern von 200 bis 250 mm ausgelegt. Die Spindeldrehzahl wird über einen Stufenriemenantrieb reguliert und bietet vier Drehzahlstufen: 1500 / 1900 / 2100 / 2600 U/min zur flexiblen Anpassung an unterschiedliche Werkzeuggrößen und Materialien. Die Maschine ist mit einer Teilvorrichtung ausgestattet und wird mit komplettem Wechselrädersatz geliefert, wodurch eine präzise Indizierung im Schärfprozess gewährleistet wird. Ein hydraulisch angetriebener Tisch sorgt für eine gleichmäßige Längsbewegung und stabile Schleifbedingungen. Mit den Gesamtmaßen von ca. 2580 × 1440 × 1520 mm und einem Maschinengewicht von ca. 3730 kg zeichnet sich die 3A662 durch eine robuste, schwingungsdämpfende Konstruktion aus, die eine langzeitstabile Bearbeitung sichert. Der Betrieb erfolgt mit Dreiphasenwechselstrom (380 V / 50 Hz). Im Lieferumfang sind die originalen Werksunterlagen enthalten. Wichtige Merkmale: * Spezialisierte Wälzfräserschleifmaschine * Max. Fräserdurchmesser: 235 mm * Max. Fräserlänge: 280 mm * Anzahl der Nuten: 4–30 * Steigungswinkelbereich: 0°–45° * Schleifscheibendurchmesser: 200–250 mm * Schleifspindeldrehzahlen: 1500 / 1900 / 2100 / 2600 U/min * Hydraulisch angetriebener Tisch * Teilvorrichtung mit vollständigem Satz Wechselräder * Schwerer, industrieller Maschinenbau (ca. 3730 kg) * Originaler technischer Pass und Bedienungsanleitung (Russisch) Typische Anwendungen: * Schärfen und Nachschleifen von Wälzfräsern * Instandhaltung von Verzahnungswerkzeugen * Werkzeugbau in Getriebefabriken * Reparatur und Wiederaufbereitung abgenutzter Fräser * Unterstützung für Klein- und Mittelserienfertigung von Zahnrädern Ibjdpjx Nprbjfx Aqrja

Būklė: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 114 129 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2820, Sale only within Germany Control: Siemens Sinumerik Software: Haas Software 7.3 Number of axes: 6 (X, X3, Y, Z, C, A) Grinding spindle: - Infinitely variable up to 8,000 rpm - Haas short taper - Max. grinding wheel diameter: Ø200 mm Workpiece spindle: - Up to 1,000 rpm - Center height: 175 mm - Clamping collet 3409 - Spindle taper: SK50 - Thru-hole diameter: Ø28.5 mm - Max. workpiece weight: 2.5 kg - Indexing accuracy: +/- 3.5 angular seconds - Input increment: 0.001° Workpiece support: Linear axis X3 with bushing holder Feed drives: - Linear axes with ball screw spindles - Direct path measurement with 0.0001 mm resolution Workpiece dimensions (drills): - Ø 0.8 - 15.0 mm - Overall length: 20 - 380 mm - Grinding length: 10 - 360 mm - Max. workpiece weight: 2.5 kg Chain magazine: - 42 positions - Ø 0.8 - 15.0 mm - Length: 80 - 250 mm - Max. workpiece weight: 1.5 kg Stack magazine: - Accommodation for stack magazine for indexable inserts Measuring system CCD area camera: - Indexing and positioning of tools by coolant channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-flute drilling and reaming tools Renishaw probe: - Probing of workpiece length / tool tip - Scanning the flute helix - Positioning in a coolant channel hole at the tool tip Electrical connection: - 63A pre-fuse - Mains voltage: 400 V - Frequency: 50 Hz - Control voltage: 24 V - Rated power: 21 kW Weight: 8 t Incl.: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft & Bauer fire extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Hold-down device ----- Operating mode for drills: - Manual loading of the chain magazine outside the machine enclosure - Workpiece feed with automatic handling system - Workpiece clamping with automatic collet chuck - Positioning of workpieces in the work area - Workpiece machining - Automatic return of workpieces to powered conveyor belt Operating mode for solid carbide indexable inserts: - Manual loading of the stack magazine in work area - Workpiece feed with automatic handling system Ibedpewpqkrjfx Aqroa - Automatic clamping with special clamping device - Positioning of workpieces in the work area - Workpiece machining - Automatic return of machined workpieces to the storage system Drill grinding: - Grinding of flute profile - Grinding of cutting edge - Peripheral grinding - Grinding of relief angle - Grinding of land - Cylindrical grinding Indexable insert grinding: - Grinding of contact surface and pin ----- Two further identical machines are available for sale!